Hidravlične giljotinske škarje

amada GPX 1230

Stanje: rabljeno, prevoženi kilometri: 962.877 km, dvižna višina: 20.000 mm, Leto izdelave: 2007, obratovalne ure: 1 h, Pogon: kolo Lastna teža: 25.460 kg Dvižna zmogljivost: 14.800 kg Serijska številka: 970090 / 5127349 Stanje prednjih pnevmatik: 80% Stanje zadnjih pnevmatik: 80% Lsdpsxwim Eofx Aacorh Transportne mere (D x Š x V): 0x0x0 Za dodatne informacije kontaktirajte PFEIFER GROUP.

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Lredekh Niqspfx Aacsh Total power requirement: 15 kW Machine weight: 11,000 kg

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Lrodpovc Aklefx Aacjh Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Tube Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5 x D → Maximum bending performance for tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending performance for tube 30 x 30 x 3 mm → Maximum bending performance for tube 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Tube feed length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control’s touch display enables easy, intuitive programming and operation of the system. After loading the tube, it is clamped in the travelling carriage’s chuck. This ensures precise positioning of the tube and thus enables the creation of dimensionally accurate geometries. Standard equipment also includes a check of the tube geometry before the bending process: if the bending process is started in the wrong position, the machine will not issue a release. This prevents operator errors. Optional additional features provide greater convenience and increase output, thereby improving the system’s efficiency. Data exchange from the optional TBS-3D tube calculation program (PC version) is done via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for the bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm Lrjdpfetr U Hlex Aacsh → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube clamping in the travelling carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly at the machine. The control calculates the feed values and the bending angles directly after the length and angle are entered. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 634 h, vrsta upravljanja: CNC krmiljenje, model krmilnika: CN DELEM T3500T, upogibna sila (maks.): 100 t, delovna širina: 3.060 mm, hod: 350 mm, razdalja med stojali: 3.384 mm, vgradna višina: 500 mm, tip kronanja: CNC krmiljen, Preša za upogibanje TRUMPF TRUBEND 3100 (X) različica s povečanim prehodom na 500 mm Samo 634 ur pod napetostjo! Zaščitni laser CNC bombirna miza CNC upravljanje DELEM T3500T CNC osi: Y1/Y2/X/X2/R/Z1/Z2 Leto izdelave: 2019 Stroj trenutno orodjen za dolžino 2550 mm, Kot dodatna oprema priložen 1 V zarez 6 mm, dolžine 2550 mm. STROJ NI PRITRJEN NA TLA Tehnične lastnosti: Lrodjx E Ag Dopfx Aacjh Dolžina upogibanja: 3060 mm Moč: 100 ton Razdalja med stojali: 3384 mm Hod drsnika: 350 mm Hod motoriziranega zadnjega naslona: 560 mm Prehod med mizo in drsnikom: 500 mm Glavna moč motorja: 24 KVA Teža: 8300 kg Dimenzije stroja (D x Š x V): 3607 x 1644 x 2800 mm

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Največja zmogljivost upogibanja: 18,0 mm Predupogib: 12,0 mm Ljdpfx Aaexruvzecsrh Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 3.200 h, stiskalna sila: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/stroke +230 mm + 4-axis backgauge system + Workspace lighting (rear) + Workspace lighting (front) - Documentation TruBend Automation BendMaster (60) Standard equipment: BendMaster - Robust base frame and manipulator in aluminium casting - Load capacity 60 kg, sheet plus gripper - Low-profile floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double-sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via Internet - Comfortable operation: screen, mouse, keyboard Safety - Protective fence with access door Special equipment + Track extension to 10 m + Gripper change console + Vacuum gripper modular kit without sheet separation (material for 3 grippers) + Vacuum gripper modular kit with sheet separation (material for 3 grippers) + Pincer gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Side door right for protective fence (or left in combination with ToolMaster) Machine - Robust machine frame in all-steel construction - Press beam - Spherical mounting of the ram with tilt capability - Electro-hydraulic upper drive with 4-cylinder technology - Optical setup and positioning aid with control valves - Generously sized bending clearance - Flat front covers - Block hydraulics - Electronic pressure gauge - Measurement system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X and R axes Tool clamping - Upper tool hydraulic clamping - Lower tool seat, hydraulic clamping, hardened - Lower tool shifting, 2 positions, pneumatic Crowning - CNC-controlled crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via Internet Operation Lrodpjxayl Defx Aaceh - Operators’ panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety features - CE marking

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Največja rezalna sila: 220kN, moč laserja: 3200W, priključek za dušik: 30bar, priključek za kisik: 20bar, priključna moč: 76kVA, obratovalne ure začetkom leta 2025: 67.766h, z laserjem Trumpf TLF 3200 in hladilnikom RIEDEL L 15/21 TR3/19.00, hladilno sredstvo: R134a, napolnjena količina: 11,5kg, visok tlak: 20,2bar. Orodja dodatno na voljo. Ogled na lokaciji možen. Lrsdpsw Uk A Rofx Aacjh

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Lredetrvzxspfx Aacjh Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, premer struženja nad prečnim suportom: 340 mm, stružna dolžina: 2.000 mm, premer struženja: 570 mm, izvrtina vretena: 83 mm, Weiler Voest Alpine E50 stružnica Opremljena s 3-čeljustno glavo in 6 multifix nosilci orodij Lrjdpfx Ajn Hp T Aeacjh