Stroj Za Rezanje Krovu nakup rabljenega (125.573)

Stanje: rabljeno, Leto izdelave: 2014, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: MG PrA 16501.25 S1200 (2 mostova) Leto izdelave: 2014 CNC krmiljenje Delovno območje: 16.500 mm x 2.500 mm + 1200 mm jašek 2 portala Portal 1: Plazemski rotator z napajalnim virom Kjellberg HiFocus 280i neo Dwedpfxewqg T Sj Ag Nsc Portal 2: Avtogeni gorilnik, plin acetilen V integriranem jašku 1.200 mm je dodatno nameščena naprava za rezanje cevi za dimenzije od 30 mm do 700 mm premera in največjo dolžino 16.500 mm Filtirna naprava Donaldson DFPRO 16 Cyclopeel za zunanjo postavitev Programska oprema za - razporeditev (nesting), - poševno rezanje, - obdelavo cevi

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Workpiece Data Maximum workpiece diameter: 275 mm Maximum standard module: 6 mm (at the pitch line in steel with tensile strength 600–700 N/mm²) Minimum standard module: 1.5 mm Maximum face width: approx. 5.5 mm Maximum helix angle: approx. 60° Maximum number of teeth: 120 Minimum number of teeth: 5 Maximum transmission ratio: 1:10 Minimum transmission ratio: 1:1 Dsdpfxjxmgr Ds Ag Newc Technical Data Dimensions and Weights Required space (L x W x H): 5200 x 2300 x 2400 mm (including all auxiliary components and electrical cabinet with doors open) Net weight (including standard accessories): approx. 15,500 kg Gross weight with standard accessories and overseas packaging: approx. 16,800 kg Chip conveyor: 300 kg Coolant tank with chip conveyor: 450 kg Band filter (optional): 600 kg Electrical Ratings and Connection Data Total connected load: 75 kVA Frequency: 50 Hz ± 1 % Voltage: 3 × 400 V ± 10 % Protection: 100 A slow-blow Voltage interruption: max. 3 ms Voltage drop: max. 20 % of peak voltage for max. 20 ms Voltage spikes: max. 200 % of nominal voltage for 1.5 ms Harmonics content: max. 10 % of the RMS value Mains symmetry (voltage difference between 2 phases): max. 2 % of nominal voltage Protective earth: interference-free Control voltage: 24 V DC Special designs: on request Mains versions: see section 5.2 Connection point (installation and foundation plan): see section 5.2 Air Supply Pressure: min. 3.5 bar, max. 10 bar Volume (with open nozzle): 0.03 Nm³/min Humidity (max. pressure dew point): 10 °C Temperature: 10 °C to 40 °C Solid particle size up to: 40 µm Connection and size: see section 5 (installation and foundation plan)

Stanje: pripravljen za uporabo (rabljen), Dimenzije: Širina: 180 mm Globina: 460 mm Višina: 280 mm Leto izdelave: 2008 Debelina reza: Kvalitetni rez 12 mm – Ločilni rez 14 mm Dwedpfxjxfk Dzj Ag Njc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, Tip: TruLaser 5030 fiber (L68); Leto: 09-2017; Delovno območje: 3000 x 1500 x 115 mm; Nazivna moč laserja: 8000 W; Dwodpfoxlr R Nsx Ag Nec Krmiljenje: Siemens Sinumerik 840D SL; Delovne ure*: ca. 42.770/30.000 h; Maks. debelina pločevine/St: 25 mm; Maks. debelina pločevine/VA: 20/40 mm (z BrightLine fiber); Maks. debelina pločevine/Al: 20/25 mm (z BrightLine fiber); Največja hitrost: 265 m/min; Natančnost pozicioniranja: +/- 0,1 mm; Dolžina: 9229 mm; Širina: 6145 mm; Višina: 2200 mm; Teža: 9700 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 15 mm, maks. debelina medeninaste pločevine: 8 mm, skupna dolžina: 3.000 mm, delovno območje: 1.500 mm, Oprema: varnostna svetlobna zapora, Bystronic BySprint Fiber 3015, 4000W Maximum cutting area: X-axis: 3048 mm, Y-axis: 1524 mm, Z-axis: 70 mm Nominal sheet size: 1500 x 3000 mm Materials and maximum cutting thicknesses: - Steel: 20 mm - Stainless steel: 15 mm - Aluminium: 15 mm - Brass and copper: 8 mm Cutting accuracy: 0.1 mm Dsdpsup Tfcjfx Ag Newc Repeatability: 0.05 mm Maximum workpiece weight: 890 kg

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Stroj TRUMPF TRUMATIC L3030 je bil izdelan leta 2006. Opremljen je z 2700 kW CO2 laserjem in Siemens CNC krmilnikom ter omogoča obdelavo plošč do velikosti 3000x1500 mm. Razmislite o nakupu tega CO2 laserskega rezalnega stroja TRUMPF TRUMATIC L3030. Za več informacij nas kontaktirajte. Dodpfxsxf N I Ss Ag Newc Vrste uporabe Rezanje

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, Miza 3000 x 1500 mm Krmilnik Siemens Teža stroja cca 12.000 kg Dimenzije stroja 9300x4600x2200 mm Delovne ure: Nosilec: 31.194 h Stroj vklopljen: 62.564 h Maks. debelina pločevine (jeklo): 20 mm - ControlLine Dwsdpfx Asxfh Haeg Nsc - SprintLine - PierceLine

Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), Maschine wird vollständig generalüberholt geliefert und ist mit einem kompletten Satz Räder für 40, 50, 60 oder 75 mm (1,57″ / 2″ / 2,36″ / 3″) Karotten sowie Schneideeinsätzen für Gitter zur Herstellung von 7,5 x 7,5 mm (0,3″ x 0,3″) oder 10 x 10 mm (0,4″ x 0,4″) Karottensticks ausgestattet. Die halbautomatische Karottensticks-Maschine vom Typ WSM schneidet Sticks in Längen- und Querschnittsgrößen gemäß Kundenspezifikation. Die Maschine ist äußerst bedienerfreundlich. Die Karotten werden manuell in die Aufnahmelöcher des Schwenkrads eingelegt. Eine Ausrichtplatte hinter dem Schwenkrad justiert die Karotten für das Köpfen und Schneiden. Das Schwenkrad dreht sich im Sekundentakt um jeweils ein Loch, jedes davon nimmt eine Karotte auf. Die Karotte wird oben und unten abgeschnitten und auf die festgelegte Länge geteilt. Im nächsten Schritt wird die Karotte durch das Schneidegitter gedrückt, um einen Stick im gewünschten Querschnitt zu erhalten. Für das Schwenkrad stehen verschiedene Loch- und Sektionsgrößen zur Verfügung. Die Einlöcherung kann 40 mm (1,57″), 50 mm (2″) oder 60 mm (2,36″) Durchmesser haben, abhängig von der Sortierung der verwendeten Karotten. Die Sektionsgröße richtet sich nach der gewünschten Länge des Sticks. Räder für 40, 50, 60 oder 75 mm (1,57″ / 2″ / 2,36″ / 3″) sind lieferbar. Dwedpopy Ewzofx Ag Njc Für Karottensticks werden üblicherweise Gittereinsätze mit 7,5 x 7,5 mm (0,3″ x 0,3″) oder 10 x 10 mm (0,4″ x 0,4″) verwendet.

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Lokacija zaloge: Stranka Dodpfx Agjxgfbqo Nswc

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €214,704 Laser power: 6 kW Manual table / Shuttle table: Shuttle table Max. sheet thickness – mild steel: 20 mm Max. sheet thickness – stainless steel: 15 mm Max. sheet thickness – aluminium: 20 mm Max. sheet thickness – copper: 10 mm Max. sheet thickness – brass: 12 mm Cutting area: 3,048 x 1,530 mm X-axis: 3,060 mm Y-axis: 1,530 mm Z-axis: 140 mm Max. sheet size: 3,048 x 1,524 mm Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Incl. delivery DAP, unloading and installation not included* Incl. commissioning and training* *valid for delivery within Austria, other countries on request Dedpfxjwirmzo Ag Nswc The HD-FO is our compact entry-level model. Control system, laser source, and chiller are all integrated into the machine to minimize overall dimensions. The shuttle table is positioned at the front, making this system ideal for customers lacking sufficient space for the conventional longitudinal layout. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head features an automatic focus adjustment. This makes the system an especially economical, fast, and very easy-to-operate production machine. The system comprises the following components: - Shuttle table (front-positioned) - Enclosed cutting chamber with protective glazing - CNC graphical controller with touchscreen - Brilase Premium DRM-8 F150 laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Equipped according to CE directives OPTION: - Extraction unit with filter - Manually extendable table instead of automatic shuttle table Further options such as Durma Cloud available upon request.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 30 mm, dolžina mize: 6.000 mm, širina mize: 2.000 mm, - including Katana controls - Plasma source Kjellberg Hi Focus 161i neo with automatic gas mixing console - Machine table 6,000 x 2,000 mm - Can mark and cut mild steel up to 30 mm (also suitable for aluminium and stainless steel with restrictions) - Including nesting software Sigmanest (dongle version, no ongoing fees) Dwodpfx Asxl Ayzeg Nec - Including accessories (see pictures) - Including extraction system (see pictures) The machine has been serviced regularly and used only infrequently (max. ca. 8–15 h per week). The plasma cutting system is still in operation and can be viewed and tested on site by prior arrangement. We can recommend a specialist company to support relocation of the machine. Original purchase price WITHOUT accessories: €140,000 plus VAT. Subject to alterations and errors Sale exclusively to businesses, VAT will be itemized. No warranty or guarantee Immediately available No dismantling and no delivery – collection ex works!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Splošni podatki Dimenzije širina 2300 mm Dimenzije dolžina 4000 mm Dimenzije višina 1800 mm Teža stroja 2000 kg Dsdpfx Aexfmncjg Njwc Waterjet Italy WL510 je bil izdelan leta 2022. Gre za vodni rezalni stroj, zasnovan za natančno razrezovanje širokega spektra materialov. Idealen za industrije, ki zahtevajo podrobno in precizno obdelavo materialov. Za več informacij nas kontaktirajte. Vrste uporabe Rezanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Lectra VIRGA.FA.CUT.MOTIF-E fabric cutting machine, year 11/2021, usable width 1,700 mm. Single-ply cutting, specifically designed for cutting stripes, checks, and panels. Only 86 operating hours. Machine currently connected and available for demonstration and testing. Djdpfsvva Uujx Ag Njwc

Stanje: rabljeno, Tru Mark TruLaser Cell 8031; vključuje laser TruDisk 3001 (6c); hladilni sistem Riedl RL170 TR.03; filtrirni sistem Herding COMP 1500-141/15/9 SB; transporter KabelSchlepp WBC 063.00L Dwodpfxow U N T Ie Ag Njc

Stanje: dober (rabljeno), Leto izdelave: 2002, Réf. : 10442 Fabricant : LIEBHERR Type : LC 122 Année de fabrication : 2002 Type de commande : CNC Commande : LIEBHERR PC NC Emplacement en stock : Halberstadt Pays d'origine : Allemagne Diamètre maxi. de fraise-mère : 90 mm Diamètre de la table : 145 mm Module maxi. : 3 mm Nombre minimal de dents usinables : 4 Angle d'inclinaison de la tête de fraisage : +/- 45° Précision de résolution : 0,1 degré Charge admissible sur la table pièce : 17 kN Vitesse de rotation de la fraise : 450 - 4 500 tr/min Dedpfxoxmd She Ag Njwc Tension d’alimentation : 400 V Tension de commande : 24 V Fréquence : 50 Hz Courant nominal max. : 55 A Fusible en ligne : 63 A Diamètre maxi. d’usinage pignons droits/côniques : 125 mm Largeur maxi. d’usinage pignons droits/côniques : 250 mm (axial) Course de broche : 180 mm Largeur maxi. de la fraise : 200 mm Informations complémentaires : Température ambiante : +12°.....+40° Niveau sonore en fonctionnement : 78 dB (A) Désignation de la tête de fraisage : Tête de fraisage motorisée Axe pièce : vertical Montant : mobile Table : fixe Procédé d’usinage : fraisage par générateur axial en avalant ou en opposition La machine peut être vue sous tension sur rendez-vous.

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Turkey Price: €202,245 Leasing rate: €3,694.95 Laser power: 6 kW Manual table / shuttle table: Shuttle table Max. sheet thickness - mild steel: 25 mm Max. sheet thickness - stainless steel: 15 mm Max. sheet thickness - aluminum: 20 mm Max. sheet thickness - copper: 10 mm Max. sheet thickness - brass: 12 mm Total connected load: 28.5 kW Cutting area: 3060 x 1525 mm X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 (275) mm Max. sheet size: 3084 x 1524 mm Max. sheet weight: 240 kg/m² Max. total weight for double table: 2160 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table changeover time: 25 s Incl. delivery DAP, without unloading or installation* Incl. commissioning and training* *Applies to delivery within Austria, for other countries, please inquire The HD-FN features two tables which are automatically exchanged to enable simultaneous cutting and loading/unloading. The shuttle table is oriented longitudinally, providing optimal accessibility for optional loading and unloading systems. Control system, laser source and cooling unit are fully integrated. The cutting head features automatic focus adjustment. The system includes the following components: - Shuttle table (longitudinally positioned for optimal accessibility to optional loading/unloading systems) - Enclosed cutting area with safety glazing - CNC graphic control with touchscreen - Laser source: Brilase Premium DRM-8 F150 - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - CAD/CAM software for programming, incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber extraction system - Light curtain protection for the shuttle table - Remote maintenance access - Equipped according to CE standards OPTION: Extraction unit with filter element Dwedpfx Agswiq T Te Noc

Stanje: novo, Leto izdelave: 2025, Laser power: 6,000 watts Round tube: 15 - 350 mm Square tube: 15 x 15 - 350 x 350 mm Rectangular tube: 15 x 15 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 40 kg/m Max. tube weight: 240 kg Length: 17,296 mm Dedpfx Ajxgc Arsg Newc Width: 4,271 mm Height: 2,933 mm Standard equipment: Working range of tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Max. loading length: 9,200 mm Max. unloading length: 6,000 mm X,Y-axis positioning accuracy: +/-0.05 mm/1000 mm X,Y-axis repeatability: +/-0.05 mm/1000 mm Max. rotational U-axis positioning speed: 100 RPM Max. X/Y-axis acceleration: 1.0 G X-axis rapid traverse speed: ≤50 m/min Max. loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃ - 40℃

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Moč laserja: 2500 W Maksimalna debelina materiala Jeklo: do 20 mm Nerjaveče jeklo: do 10 mm Aluminij: do 10 mm Dedpfxoxirh As Ag Njwc Stroj Mazak MAZAK HTX510 je bil izdelan leta 2012. To je CO₂ laserski rezalni stroj z delovnim območjem 3000 × 1500 mm in močjo laserja 2500 W. Reže jeklo do debeline 20 mm ter nerjaveče jeklo in aluminij do 10 mm. Opremljen je z avtomatsko menjavo glave in šobe ter s popolnim sistemom za nakladanje in razkladanje. Razmislite o nakupu tega Mazak MAZAK HTX510 CO₂ laserskega rezalnika. Kontaktirajte nas za več informacij. Vrste uporabe Rezanje

Leto izdelave: 2020, Stanje: dober (rabljeno), Stroj je v odličnem stanju. Deli, ki so prikazani ročno, niso priloženi. Dedpfx Agsukficj Njwc

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 15 mm, maks. debelina aluminijaste pločevine: 12 mm, Premer cevi (maks.): 220 mm, Dolžina cevi (maks.): 6.000 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, moč: 3,15 kW (4,28 KM), Planarni laserski stroj z enoto za rezanje cevi Dwsdjxmikcopfx Ag Noc - 16-kratni avtomatski menjalnik šob - 2-kratna kasetna miza - Industrijski hladilnik KKT Chillers - Filtrirna naprava Herding Comp 1500-9/9 SB - Delovne ure laserja: 1.595 - Ure rezanja: 1.168 - Obratovalni čas: 1.741

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €203,565 Leasing rate: €3,910.45 Laser power: 4 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 20 mm Max. sheet thickness – stainless steel: 10 mm Max. sheet thickness – aluminium: 12 mm Max. sheet thickness – copper: 6 mm Max. sheet thickness – brass: 10 mm Cutting area: 3,048 x 1,530 mm X-axis: 3,048 mm Y-axis: 1,530 mm Z-axis: 125 mm Max. sheet size: 3,048 x 1,524 mm Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Including delivery DAP, excluding unloading and installation* Including commissioning and training* *Applies for delivery to Austria, for other countries upon request The HD-FO is our compact entry-level model. The control unit, laser source, and cooling system are integrated into the machine to keep the overall dimensions as small as possible. The shuttle table is positioned at the front, making this machine ideal for customers who lack sufficient installation space for traditional longitudinal positioning. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head features automatic focus adjustment. This makes the machine particularly economical, fast, and very easy to operate for production use. The system consists of the following components: - Shuttle table (front mounted) - Enclosed cutting area with safety glass - CNC graphical control unit with touchscreen - Laser source: Brilase Premium DRM-8 F150 - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - CAD/CAM software for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Equipped according to CE guidelines OPTION: - Extraction unit with filter - Manually extendable table instead of automatic shuttle table Dwodpfswiq T Hex Ag Nec Further options such as Durma Cloud available upon request.

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €188,945 Leasing rate: €3,571.06 Laser power: 6 kW Table type: Manual table Max. sheet thickness - mild steel: 20 mm Max. sheet thickness - stainless steel: 15 mm Max. sheet thickness - aluminium: 20 mm Max. sheet thickness - copper: 10 mm Max. sheet thickness - brass: 12 mm Cutting area: 3,048 x 1,530 mm X-axis: 3,048 mm Y-axis: 1,530 mm Z-axis: 125 mm Max. sheet size: 3,048 x 1,524 mm Max. sheet weight: 127 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Weight: 6,600 kg Including delivery DAP, unloading and installation not included* Including commissioning and training* *Applies for delivery to Austria, other countries on request The HD-FO is our compact entry-level model. Controller, laser source, and cooling system are integrated within the machine to minimize overall dimensions. The manually extendable table moves out laterally for loading and unloading. The cutting head features automatic focus adjustment. Dedpfx Aowiq Dxeg Newc This makes the machine a particularly economical, fast, and user-friendly production system. The system consists of the following components: - Manual loading/unloading table - Enclosed cutting area with safety glazing - CNC graphical controller with touchscreen - Brilase Premium DRM-8 F150 laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap bin - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Supplied in accordance with CE guidelines DIMENSIONS: Machine length: 5,600 mm Machine width: 2,700 mm Machine height: 2,130 mm Machine height with loading door open: 2,725 mm Extraction unit length: 2,500 mm Extraction unit width: 1,400 mm Required floor space (according to layout plan): 8,500 x 5,500 mm OPTIONAL: - Extraction unit with filters - Shuttle table system for simultaneous loading/unloading and cutting to reduce downtime - Further options such as Durma Cloud available upon request.

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €177,806 Leasing rate: €3,360.53 Laser power: 4 kW Manual/Changing Table: Manual Table Max. sheet thickness - mild steel: 20 mm Max. sheet thickness - stainless steel: 10 mm Max. sheet thickness - aluminium: 12 mm Max. sheet thickness - copper: 6 mm Max. sheet thickness - brass: 10 mm Cutting area: 3,048 x 1,530 mm X-axis: 3,048 mm Y-axis: 1,530 mm Z-axis: 125 mm Max. sheet size: 3,048 x 1,524 mm Max. sheet weight: 127 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Weight: 6,600 kg Delivery included DAP, excl. unloading and installation on site* Commissioning and operator training included* *Applies to Austria; other countries on request The HD-FO is our compact entry-level model. The control, laser source, and cooling system are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table can be pulled out from the side for loading and unloading. The cutting head features automatic focus adjustment. This makes the machine especially economical, fast, and very easy to operate. The system includes the following components: - Manual loading/unloading table - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase Premium DRM-8 F150 laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - CAD/CAM software for programming and optimized material usage (nesting) Dwsdpfswiqzqex Ag Noc - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Waste box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Equipped according to CE directives DIMENSIONS: Guideway machine length: 5,600 mm Guideway machine width: 2,700 mm Guideway machine height: 2,130 mm Guideway machine height with open loading door: 2,725 mm Extraction unit length: 2,500 mm Extraction unit width: 1,400 mm Space requirement according to layout: 8,500 x 5,500 mm OPTION: - Extraction unit with filters - Shuttle table system for simultaneous loading/unloading and cutting to reduce secondary production times - Further options such as Durma Cloud available on request.

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €191,106 Leasing rate: €3,611.90 Laser power: 4 kW Manual table / Shuttle table: Shuttle table Max. sheet thickness – mild steel: 20 mm Max. sheet thickness – stainless steel: 10 mm Max. sheet thickness – aluminium: 12 mm Max. sheet thickness – copper: 6 mm Max. sheet thickness – brass: 10 mm Total connected load: 27.5 kW Cutting area: 3060 x 1525 mm X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 (275) mm Dodswiqtaepfx Ag Njwc Max. sheet size: 3048 x 1524 mm Max. sheet weight: 240 kg/m² Max. total weight for the double table: 2160 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 25 s Including delivery DAP, without unloading or indoor installation* Including commissioning and operator training* * Applies for delivery to Austria, other countries upon request The HD-FN features two tables which are automatically exchanged in sequence to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal access for optional loading and unloading systems. Control unit, laser source, and cooling system are integrated into the machine. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinally positioned for best possible accessibility for optional loading and unloading systems) - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase Premium DRM-8 F150 laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - CAD/CAM programming software incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber exhaust system - Light curtain protection for the shuttle table - Remote maintenance access - Equipped in accordance with CE regulations OPTION: - Extraction unit with filter module

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €154,988 Leasing rate: €2,929.27 Laser power: 3 kW Max. sheet thickness - mild steel: 12 mm Max. sheet thickness - stainless steel: 6 mm Max. sheet thickness - aluminium: 6 mm Max. sheet thickness - copper: 3 mm Max. sheet thickness - brass: 6 mm Total connected load: 26.5 kW Max. tube diameter: 250 mm Min. tube diameter: 16 mm Max. dimensions for square profiles: 160 x 160 mm Max. dimensions for rectangular profiles: 200 x 150 mm Max. profile length: 6000 mm Max. profile weight: 58 kg/m Positioning accuracy: +/- 0.2 mm Repeatability: +/- 0.05 mm Profile types: round, square, rectangular Max. speed X-axis: 40 m/min Max. speed Y-axis: 94 m/min Max. speed Z-axis: 30 m/min Max. speed A-axis: 510°/s The system consists of the following components: - Enclosed cutting area with safety glass - CNC graphical control with touchscreen - Brilase 3 kW Premium laser source incl. chiller - Cutting head with automatic focus adjustment - Manual loading - Manual unloading table, 3 m - Positioning laser - Central lubrication - Scrap collection trolley - CAD/CAM software with auto-nesting - Work area lighting Dwodpfx Agewiqr Ao Nec PRICE FCA TURKEY OPTIONS: - Extraction unit with filters - Semi-automatic front loading system - 6 m unloading table with conveyor unit - Durma Cloud licence - Laser source with 4 or 6 kW available on request