Stroj Za Rezanje Cevi nakup rabljenega (124.866)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas

362 km
Stroj za rezanje z vodnim curkom
Waterjet ItalyWL510
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Splošni podatki
Itsdpfxoxfmncj Ah Don
Dimenzije širina 2300 mm
Dimenzije dolžina 4000 mm
Dimenzije višina 1800 mm
Teža stroja 2000 kg
Waterjet Italy WL510 je bil izdelan leta 2022. Gre za vodni rezalni stroj, zasnovan za natančno razrezovanje širokega spektra materialov. Idealen za industrije, ki zahtevajo podrobno in precizno obdelavo materialov. Za več informacij nas kontaktirajte.
Vrste uporabe
Rezanje
mali oglas

358 km
Laserski stroj za rezanje
TRUMPFTruLaser 3030 TruFlow
Klic
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, Miza 3000 x 1500 mm
Itodpfoxfh Haox Ah Don
Krmilnik Siemens
Teža stroja cca 12.000 kg
Dimenzije stroja 9300x4600x2200 mm
Delovne ure:
Nosilec: 31.194 h
Stroj vklopljen: 62.564 h
Maks. debelina pločevine (jeklo): 20 mm
- ControlLine
- SprintLine
- PierceLine
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINAMedibender MB 42T
Klic
Stanje: novo, Leto izdelave: 2024, Condition: New
Year of manufacture: 2024
Stock number: 9721
Delivery time: Immediate, subject to prior sale
Country of origin: Italy
Price: €7,780
Leasing rate: €150.15
Bestseller: 1
In stock: 1
Max. diameter (steel tube): 42 mm
Length: 400 mm
Width: 570 mm
Height: 1,000 mm
Weight: 80 kg
Max. bending – section modulus: 4 cm³
Standard steel tube: 42 x 3 mm
Furniture tube: 48 x 1.5 mm
St35 (for hydraulic lines): 42 x 4 mm
Stainless steel AISI304-318: 42 x 2 mm
Stainless steel AISI308 (food grade): 42 x 2 mm
Brass (soft): 50 x 3 mm
Hard copper and aluminium: 54 x 2 mm
Iedpfewirzfox Ah Detn
Copper (soft): 54 x 2 mm
Conduit pipe (TAZ): 60 x 2 mm
Mepla, Gebereit, and similar: 50 x 4 mm
Round steel (S275JO): 30 mm
Flat bar (S275JO): 40x20 mm (horizontal), 40x12 mm
Max. bending radius: 260 mm
Min. bending radius: 10 mm
Max. bending speed: 3.3 rpm
Motor: 1.1 kW
Manual clamping
Digital bending angle display
Digital clamping point display
30 programs, each with 9 angles
Springback compensation
Overload protection
Mobile with wheels and handle
Foot pedal
Tools not included
ALSO AVAILABLE AS THE FOLLOWING MODELS (PRICES ON REQUEST):
MB 42M (single-phase, 2 rpm)
MB 42PM (portable, single-phase, 2 rpm)

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas

701 km
Stroj za rezanje moških navojev
RollerKing2
Klic
Stanje: zelo dobro (rabljeno), ROLLER THREADING MACHINE KING2 SET C R1/2-2.
Iedpfxevgng Hs Ah Djtn
Threading machine, electric
Design: robust, maintenance-free gearbox with special gear ratio for optimal force transmission, reversible (left/right), equipped with thermal overload protection and emergency stop switch. Self-reinforcing clamping effect thanks to the angular positioning of the clamping screw. Stable support bracket for torque assistance in both directions of rotation. Easy and quick replacement of cutting heads. Unique cutting head locking mechanism in the ratchet lever ensures secure seating during threading. Supplied complete with Central cutting heads and carrying case.
mali oglas

452 km
Stroj za rezanje korenja Batoning
SormacCarrot baton machine WSM
Klic
Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), Maschine wird vollständig generalüberholt geliefert und ist mit einem kompletten Satz Räder für 40, 50, 60 oder 75 mm (1,57″ / 2″ / 2,36″ / 3″) Karotten sowie Schneideeinsätzen für Gitter zur Herstellung von 7,5 x 7,5 mm (0,3″ x 0,3″) oder 10 x 10 mm (0,4″ x 0,4″) Karottensticks ausgestattet.
Die halbautomatische Karottensticks-Maschine vom Typ WSM schneidet Sticks in Längen- und Querschnittsgrößen gemäß Kundenspezifikation.
Die Maschine ist äußerst bedienerfreundlich. Die Karotten werden manuell in die Aufnahmelöcher des Schwenkrads eingelegt. Eine Ausrichtplatte hinter dem Schwenkrad justiert die Karotten für das Köpfen und Schneiden.
Das Schwenkrad dreht sich im Sekundentakt um jeweils ein Loch, jedes davon nimmt eine Karotte auf. Die Karotte wird oben und unten abgeschnitten und auf die festgelegte Länge geteilt. Im nächsten Schritt wird die Karotte durch das Schneidegitter gedrückt, um einen Stick im gewünschten Querschnitt zu erhalten.
Itjdopy Ewzopfx Ah Den
Für das Schwenkrad stehen verschiedene Loch- und Sektionsgrößen zur Verfügung. Die Einlöcherung kann 40 mm (1,57″), 50 mm (2″) oder 60 mm (2,36″) Durchmesser haben, abhängig von der Sortierung der verwendeten Karotten. Die Sektionsgröße richtet sich nach der gewünschten Länge des Sticks. Räder für 40, 50, 60 oder 75 mm (1,57″ / 2″ / 2,36″ / 3″) sind lieferbar.
Für Karottensticks werden üblicherweise Gittereinsätze mit 7,5 x 7,5 mm (0,3″ x 0,3″) oder 10 x 10 mm (0,4″ x 0,4″) verwendet.
Odkrijte več rabljenih strojev
mali oglas

457 km
CNC stroj za rezanje z vodnim curkom
waterjet3000 x 1800
Klic
Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza
Iedpjxgfbqsfx Ah Detn
Lokacija zaloge: Stranka
mali oglas

514 km
Laserski stroj za rezanje CO2
MazakMAZAK HTX510
Klic
Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Glavni pogon
Moč laserja: 2500 W
Maksimalna debelina materiala
Jeklo: do 20 mm
Nerjaveče jeklo: do 10 mm
Aluminij: do 10 mm
Stroj Mazak MAZAK HTX510 je bil izdelan leta 2012. To je CO₂ laserski rezalni stroj z delovnim območjem 3000 × 1500 mm in močjo laserja 2500 W. Reže jeklo do debeline 20 mm ter nerjaveče jeklo in aluminij do 10 mm. Opremljen je z avtomatsko menjavo glave in šobe ter s popolnim sistemom za nakladanje in razkladanje. Razmislite o nakupu tega Mazak MAZAK HTX510 CO₂ laserskega rezalnika. Kontaktirajte nas za več informacij.
Itodpfjxirh Ajx Ah Don
Vrste uporabe
Rezanje
mali oglas

758 km
Stroj za upogibanje cevi
METALLKRAFTRB 54
Klic
Stanje: novo, Leto izdelave: 2025, Mandrelless Tube Bending Machine
Iodpovk Scgefx Ah Dstn
RB 54 – NC controlled, with large program memory
Item number: 4300054
NC control for setting bending angles
Up to 50 programs storable
High-quality, robust construction
Rapid tool change
Fully motorized drive
Automatically returns to starting position
TECHNICAL DATA
General Information
Maximum bending radius: 162 mm
Maximum bending angle: 210°
Bending speed: 2 rpm
Torque: 2,341 Nm
Dimensions and Weights
Length (approx.): 600 mm
Width/Depth (approx.): 220 mm
Height (approx.): 470 mm
Net weight (approx.): 107 kg
Bending Capacities
Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm
Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm
Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm
Electrical Data
Drive motor power: 1.1 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Location: ex stock
- immediately available -
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINATopbender TB 050 T
Klic
Stanje: novo, Condition: New
Delivery time: approx. 4 weeks from order placement
Country of origin: Italy
Price: €10,900
Leasing rate: €209.28
Max. diameter (steel tube): 60 mm
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg
Max. bending section modulus (E): 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas pipe for pipelines: 2" (BSPT) x 3.91 mm
Furniture tube: 60 x 4 mm
Stainless steel AISI304-318: 60 x 2 mm
Stainless steel AISI308 (food-grade): 60 x 4 mm
Soft brass: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit pipe (TAZ): 60 x 4 mm
Mepla, Geberit, and similar: 50 x 4 mm
Round steel (S275JO): 35 mm
Iodpfxswirxko Ah Detn
Flat steel (S275JO): 60 x 30 x 4 mm upright, 60 x 40 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1.25 / 2.50 rpm
Motor: 1.5 kW
Digital display of bending angle
Digital readout of clamping point
Manual clamping
Electronic angle pre-selection
Clamping point digitally readable and storable
Springback compensation
2 hexagon tool holders (40 and 50 mm)
2 speeds
Overload protection
Mobile via rollers and handle
Tools not included
mali oglas

359 km
Stroj za rezanje blaga
LectraVirga Fashion
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Lectra VIRGA.FA.CUT.MOTIF-E fabric cutting machine, year 11/2021, usable width 1,700 mm. Single-ply cutting, specifically designed for cutting stripes, checks, and panels. Only 86 operating hours. Machine currently connected and available for demonstration and testing.
Itsdpfx Ahovva Uuj Den
mali oglas

405 km
Stroj za rezanje
CMS
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Stroj za rezanje blokov z vključenim transporterjem za prizme. Proizvedeno v Italiji.
Itjdpfxexlpvps Ah Djn
mali oglas

736 km
Stroj za rezanje papirja
Polar Mohr N92 PRO HDPaper Cutting Guillotine
Klic
Stanje: dober (rabljeno), Polar Mohr N92 PRO HD giljotina za rezanje papirja
Stroj v popolnem stanju, servisiran in pripravljen za delo.
Izdelan leta 2021.
Edinstven model na trgu.
Vizualizacija reza na monitorju.
Tehnične specifikacije:
Širina reza: 920 mm
Višina kupa: 130 mm
Programator z 21,5'' barvnim HD zaslonom na dotik
Napajanje: 400V
Teža: 2000 kg
Povečane stranske mize
Kromirana površina mize
Itodpfx Aoxmvdpeh Dsn
Osvetlitev mize in optična linija rezanja
Prilagodljiva pritrdilna sila
Dodatni pokrovi zadnje mize
Rezervno rezilo, letve za rezanje, udarni blok in orodje za upravljanje v kompletu.
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINATopbender TB 130 PT
Klic
Stanje: novo, Condition: new
Delivery time: approx. 8 weeks from order
Country of origin: Italy
Price: €39,500
Leasing rate: €754.45
Max. diameter (steel pipe): 127 mm
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg
Max. bending modulus (E-modulus): 80 cm³
Standard steel pipe: 127 x 7.1 mm
Gas pipe for pipelines: 4" x 8.56 mm
Furniture tube: 127 x 7.1 mm
Stainless steel AISI304-318: 114.3 x 5.6 mm
Stainless steel AISI308 (food grade): 114.3 x 5.6 mm
Soft brass: 139.7 x 8.8 mm
Hard copper and aluminium: 139.7 x 8.8 mm
Soft copper: 64 x 6 mm
Conduit pipe (TAZ): 88.9 x 3.65 mm
Mepla, Gebereit and similar: 50 x 4 mm
Round steel (S275JO): 90 mm
Flat bar (S275JO): 130 x 25 mm upright, 130 x 6 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. pipe Ø: 10 mm
Max. bending speed: 0 - 0.75 rpm
Motor: 3.5 kW
Quick-change tooling system
Digital bending angle display
Springback compensation
Accurate slide shoe positioning
Ijdpfx Ahowirvie Djtn
Foot switch
Four hexagonal tool holders (40, 50, 80, and 110 mm)
Left and right bending possible
Operating manual
Tooling on request
mali oglas

736 km
Stroj za rezanje papirja
Wohlenberg 76 SPMPaper Cutting Guillotine
Klic
Stanje: dober (rabljeno), Wohlenberg 76 SPM Giljotina za rezanje papirja
Giljotina za papir, plastiko, folijo, karton, usnje itd.
Stroj je bil obnovljen, v zelo dobrem stanju in pripravljen za uporabo.
Najuspešnejša Wohlenbergova konstrukcija, neuničljiv stroj.
Tehnične specifikacije:
Delovna širina: 760 mm
Višina kupa: 110 mm
Napajanje: 380V
Teža: 1200 kg
Oprema:
– Programator s pomnilnikom korakov, izmet materiala itd.
– Zračna miza
– Hidravlični pritisk z nastavljivo silo
– Varnostne zaščite
– Pritisna plošča
– Rezervni nož
Itedpfx Ahjxmvclj Djn
– Rezalne letve
– Orodje
– Blok za poravnavo kupa papirja
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINATopbender TB 100 PT
Klic
Stanje: novo, Condition: New
Delivery time: approx. 8 weeks from order
Country of origin: Italy
Price: €29,100
Leasing rate: €555.81
Max. diameter (steel pipe): 100 mm
Iedpfx Aewirvcsh Detn
Length: 500 mm
Width: 1,200 mm
Height: 850 mm
Weight: 480 kg
Max. bending section modulus: 43 cm³
Standard steel pipe: 100 x 6 mm
Gas pipe for pipelines: 3½" x 4 mm
Furniture tubing: 100 x 6 mm
Stainless steel AISI304-318: 100 x 3.6 mm
Stainless steel AISI308 (food-grade): 100 x 3.6 mm
Soft brass: 114.3 x 6.3 mm
Hard copper and aluminium: 114.3 x 6.3 mm
Soft copper: 114.4 x 6.3 mm
Conduit pipe (TAZ): 88.9 x 3.65 mm
Mepla, Gebereit and similar: 100 x 5 mm
Round steel (S275JO): 70 mm
Flat steel (S275JO): 100 x 25 mm upright, 100 x 5 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. pipe Ø: 10 mm
Max. bending speed: 0 - 1.3 rpm
Motor: 3.5 kW
Tool quick-change system
Digital bend indicator
Programmable speed for each individual bend
Spring-back compensation
Precise positioning of the pressure die
Footswitch
3 hexagonal tool holders (40, 50, and 80 mm)
Left and right bending possible
Operating manual
Tools not included, prices on request
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINATopbender TB 60 T
Klic
Stanje: novo, Condition: new
Delivery time: approx. 8 weeks from order confirmation
Country of origin: Italy
Price: €12,460
Ijdpewiru Sjfx Ah Dotn
Leasing rate: €239.23
Max. diameter (steel pipe): 60 mm
Length: 500 mm
Width: 760 mm
Height: 1,000 mm
Weight: 186 kg
Max. bending modulus (E-modulus): 10 cm³
Standard steel pipe: 60 x 4 mm
Gas pipe for piping: 2" x 3.91 mm
Furniture tube: 60 x 4 mm
Stainless steel AISI 304-318: 60 x 2 mm
Stainless steel AISI 308 (food grade): 60 x 3 mm
Soft brass: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit pipe (TAZ): 63 x 4 mm
Mepla, Geberit and similar: 50 x 4 mm
Round steel (S275JO): 35 mm
Bar steel (S275JO): 35 x 35 mm
Flat steel (S275JO): 60 x 20 vertical, 60 x 35 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1.5 / 3 rpm
Motor: 1.5 kW
Digital display for bending angle
Digital display for clamping point
Quick-change tool system with various radii available
Springback compensation
Foot pedal
Operator’s manual
Tools not included, prices on request
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FO 6kW - WT
Klic
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €214,704
Laser power: 6 kW
Manual table / Shuttle table: Shuttle table
Max. sheet thickness – mild steel: 20 mm
Max. sheet thickness – stainless steel: 15 mm
Max. sheet thickness – aluminium: 20 mm
Max. sheet thickness – copper: 10 mm
Max. sheet thickness – brass: 12 mm
Cutting area: 3,048 x 1,530 mm
X-axis: 3,060 mm
Y-axis: 1,530 mm
Z-axis: 140 mm
Max. sheet size: 3,048 x 1,524 mm
Max. X-axis speed: 90 m/min
Max. Y-axis speed: 90 m/min
Max. simultaneous speed: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Incl. delivery DAP, unloading and installation not included*
Incl. commissioning and training*
*valid for delivery within Austria, other countries on request
The HD-FO is our compact entry-level model. Control system, laser source, and chiller are all integrated into the machine to minimize overall dimensions.
The shuttle table is positioned at the front, making this system ideal for customers lacking sufficient space for the conventional longitudinal layout.
Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head features an automatic focus adjustment.
This makes the system an especially economical, fast, and very easy-to-operate production machine.
The system comprises the following components:
- Shuttle table (front-positioned)
- Enclosed cutting chamber with protective glazing
- CNC graphical controller with touchscreen
- Brilase Premium DRM-8 F150 laser source
- Cutting head with automatic focus adjustment
Itedpfxjwirmzs Ah Don
- Integrated chiller for cutting head and laser source
- CAD/CAM software for programming and optimized material utilization (nesting)
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Scrap box
- Work area lighting
- Multi-chamber extraction system
- Remote maintenance access
- Equipped according to CE directives
OPTION:
- Extraction unit with filter
- Manually extendable table instead of automatic shuttle table
Further options such as Durma Cloud available upon request.
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINASuperbender SB 48T
Klic
Stanje: novo, Condition: new
Delivery time: approx. 4 weeks from order
Country of origin: Italy
Price: €9,340
Itsdpjwirlkofx Ah Don
Lease rate: €180.26
Maximum diameter (steel pipe): 48 mm
Length: 570 mm
Width: 410 mm
Height: 1,000 mm
Weight: 110 kg
Maximum bending section modulus: 6 cm³
Standard steel pipe: 48 x 3.5 mm
Gas pipe for pipelines: 1"1/2 x 3.68 mm
Furniture tubing: 54 x 1.5 mm
St35 (for hydraulic lines): 50 x 4 mm
Stainless steel AISI304-318: 48 x 2 mm
Stainless steel AISI308 (food-grade): 48 x 2 mm
Brass, soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Copper, soft: 64 x 2 mm
Conduit pipe (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Round steel (S275JO): 32 mm
Flat steel (S275JO): 45 x 16 mm upright, 45 x 25 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 2/3 rpm
Motor: 1.5 kW
Three-phase
Digital display for bending angle
Digital display for clamping point
Springback compensation
Quick-change tooling system
2 hexagonal tool holders (40 and 50 mm)
Precise positioning of the sliding shoe
Mobile due to transport device
Foot switch
Operating manual
ALSO AVAILABLE AS THE FOLLOWING MODEL (PRICE ON REQUEST):
SB 48M (single-phase, 2 rpm)
Model with TCPlus control panel on request
MACHINE KIT WITH TOOLS (PRICES ON REQUEST):
.
Machine
Tube
Radius
SB 48M K2D
SB 48M
Gas inches
2 x Ø
SB 48T K2D
SB 48T
Gas inches
2 x Ø
Bending segments:
Ø 1/2" (21.3 mm), R46
Ø 3/4" (26.9 mm), R56
Ø 1" (33.7 mm), R67
Ø 1" 1/4 (42.25 mm), R90
Ø 1" 1/2 (48.25 mm), R100
.
Machine
Tube
Radius
SB 48M K3D
SB 48M
Gas inches
3 x Ø
SB 48T K3D
SB 48T
Gas inches
3 x Ø
Bending segments:
Ø 1/2" (21.3 mm), R67
Ø 3/4" (26.9 mm), R82
Ø 1" (33.7 mm), R112
Ø 1" 1/4 (42.25 mm), R130
Ø 1" 1/2 (48.25 mm), R150
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FN 6 kW
Klic
Stanje: novo, Condition: New
Delivery time: approx. 8 weeks from order
Country of origin: Turkey
Price: €202,245
Leasing rate: €3,694.95
Laser power: 6 kW
Manual table / shuttle table: Shuttle table
Max. sheet thickness - mild steel: 25 mm
Itsdpfxjwiq T Te Ah Don
Max. sheet thickness - stainless steel: 15 mm
Max. sheet thickness - aluminum: 20 mm
Max. sheet thickness - copper: 10 mm
Max. sheet thickness - brass: 12 mm
Total connected load: 28.5 kW
Cutting area: 3060 x 1525 mm
X-axis: 3060 mm
Y-axis: 1525 mm
Z-axis: 125 (275) mm
Max. sheet size: 3084 x 1524 mm
Max. sheet weight: 240 kg/m²
Max. total weight for double table: 2160 kg
Max. X-axis speed: 100 m/min
Max. Y-axis speed: 100 m/min
Max. simultaneous speed: 141 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Table changeover time: 25 s
Incl. delivery DAP, without unloading or installation*
Incl. commissioning and training*
*Applies to delivery within Austria, for other countries, please inquire
The HD-FN features two tables which are automatically exchanged to enable simultaneous cutting and loading/unloading.
The shuttle table is oriented longitudinally, providing optimal accessibility for optional loading and unloading systems.
Control system, laser source and cooling unit are fully integrated. The cutting head features automatic focus adjustment.
The system includes the following components:
- Shuttle table (longitudinally positioned for optimal accessibility to optional loading/unloading systems)
- Enclosed cutting area with safety glazing
- CNC graphic control with touchscreen
- Laser source: Brilase Premium DRM-8 F150
- Cutting head with automatic focus adjustment
- Integrated cooling unit for cutting head and laser source
- CAD/CAM software for programming, incl. autonesting
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Central lubrication
- Scrap box
- Work area lighting
- Multi-chamber extraction system
- Light curtain protection for the shuttle table
- Remote maintenance access
- Equipped according to CE standards
OPTION:
Extraction unit with filter element
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FO 4kW - WT
Klic
Stanje: novo, Condition: new
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €203,565
Leasing rate: €3,910.45
Laser power: 4 kW
Manual table / shuttle table: Shuttle table
Max. sheet thickness – mild steel: 20 mm
Max. sheet thickness – stainless steel: 10 mm
Max. sheet thickness – aluminium: 12 mm
Max. sheet thickness – copper: 6 mm
Max. sheet thickness – brass: 10 mm
Cutting area: 3,048 x 1,530 mm
X-axis: 3,048 mm
Y-axis: 1,530 mm
Itsdpfx Aswiq T Heh Djn
Z-axis: 125 mm
Max. sheet size: 3,048 x 1,524 mm
Max. X-axis speed: 90 m/min
Max. Y-axis speed: 90 m/min
Max. simultaneous speed: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Including delivery DAP, excluding unloading and installation*
Including commissioning and training*
*Applies for delivery to Austria, for other countries upon request
The HD-FO is our compact entry-level model. The control unit, laser source, and cooling system are integrated into the machine to keep the overall dimensions as small as possible.
The shuttle table is positioned at the front, making this machine ideal for customers who lack sufficient installation space for traditional longitudinal positioning.
Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head features automatic focus adjustment.
This makes the machine particularly economical, fast, and very easy to operate for production use.
The system consists of the following components:
- Shuttle table (front mounted)
- Enclosed cutting area with safety glass
- CNC graphical control unit with touchscreen
- Laser source: Brilase Premium DRM-8 F150
- Cutting head with automatic focus adjustment
- Integrated cooling unit for cutting head and laser source
- CAD/CAM software for programming and optimized material utilization (nesting)
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Scrap box
- Work area lighting
- Multi-chamber extraction system
- Remote maintenance access
- Equipped according to CE guidelines
OPTION:
- Extraction unit with filter
- Manually extendable table instead of automatic shuttle table
Further options such as Durma Cloud available upon request.
mali oglas

237 km
Stroj za upogibanje cevi
ERCOLINAMegabender MG 030 V2T
Klic
Stanje: novo, Condition: new
Delivery time: approx. 8 weeks from order
Country of origin: Italy
Price: €14,020
Leasing rate: €269.18
Max. diameter (steel tube): 76 mm
Length: 370 mm
Itsdpfx Ajwiq Nhsh Djn
Width: 680 mm
Height: 910 mm
Weight: 193 kg
Max. bending - section modulus: 15 cm³
Standard steel tube: 76 x 3 mm
Gas pipe for pipelines: 2" x 5.4 mm
Furniture tube: 76 x 3 mm
Stainless steel AISI304-318: 70 x 4 mm
Stainless steel AISI308 (food-grade): 76 x 1.6 mm
Soft brass: 76 x 4 mm
Hard copper and aluminium: 76 x 6 mm
Soft copper: 76 x 6 mm
Conduit pipe (TAZ): 76.3 x 3.25 mm
Mepla, Gebereit and similar: 50 x 4 mm
Round steel (S275JO): 45 mm
Flat steel (S275JO): 75 x 15 upright, 75 x 30 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1/2 rev./min
Motor: 3.5 kW
Digital bending display
Spring-back compensation
Quick-change system
2 hexagonal tool holders (40 and 50 mm)
Precise positioning of the slide shoe
Foot switch
Operating instructions
Tools not included
Model with TCPlus control unit on request
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FO 6kW
Klic
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €188,945
Leasing rate: €3,571.06
Laser power: 6 kW
Table type: Manual table
Max. sheet thickness - mild steel: 20 mm
Max. sheet thickness - stainless steel: 15 mm
Max. sheet thickness - aluminium: 20 mm
Max. sheet thickness - copper: 10 mm
Max. sheet thickness - brass: 12 mm
Cutting area: 3,048 x 1,530 mm
X-axis: 3,048 mm
Y-axis: 1,530 mm
Z-axis: 125 mm
Max. sheet size: 3,048 x 1,524 mm
Max. sheet weight: 127 kg/m²
Max. X-axis speed: 90 m/min
Max. Y-axis speed: 90 m/min
Max. simultaneous speed: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Weight: 6,600 kg
Including delivery DAP, unloading and installation not included*
Including commissioning and training*
*Applies for delivery to Austria, other countries on request
The HD-FO is our compact entry-level model. Controller, laser source, and cooling system are integrated within the machine to minimize overall dimensions. The manually extendable table moves out laterally for loading and unloading. The cutting head features automatic focus adjustment.
This makes the machine a particularly economical, fast, and user-friendly production system.
The system consists of the following components:
Itodpfx Ahewiq Dxe Dsn
- Manual loading/unloading table
- Enclosed cutting area with safety glazing
- CNC graphical controller with touchscreen
- Brilase Premium DRM-8 F150 laser source
- Cutting head with automatic focus adjustment
- Integrated chiller for cutting head and laser source
- CAD/CAM software for programming and optimized material utilization (nesting)
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Scrap bin
- Work area lighting
- Multi-chamber extraction system
- Remote maintenance access
- Supplied in accordance with CE guidelines
DIMENSIONS:
Machine length: 5,600 mm
Machine width: 2,700 mm
Machine height: 2,130 mm
Machine height with loading door open: 2,725 mm
Extraction unit length: 2,500 mm
Extraction unit width: 1,400 mm
Required floor space (according to layout plan): 8,500 x 5,500 mm
OPTIONAL:
- Extraction unit with filters
- Shuttle table system for simultaneous loading/unloading and cutting to reduce downtime
- Further options such as Durma Cloud available upon request.
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FO 4kW
Klic
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €177,806
Leasing rate: €3,360.53
Laser power: 4 kW
Manual/Changing Table: Manual Table
Max. sheet thickness - mild steel: 20 mm
Max. sheet thickness - stainless steel: 10 mm
Max. sheet thickness - aluminium: 12 mm
Max. sheet thickness - copper: 6 mm
Max. sheet thickness - brass: 10 mm
Cutting area: 3,048 x 1,530 mm
X-axis: 3,048 mm
Y-axis: 1,530 mm
Z-axis: 125 mm
Max. sheet size: 3,048 x 1,524 mm
Max. sheet weight: 127 kg/m²
Max. X-axis speed: 90 m/min
Max. Y-axis speed: 90 m/min
Max. simultaneous speed: 127 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Weight: 6,600 kg
Delivery included DAP, excl. unloading and installation on site*
Commissioning and operator training included*
*Applies to Austria; other countries on request
The HD-FO is our compact entry-level model. The control, laser source, and cooling system are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table can be pulled out from the side for loading and unloading. The cutting head features automatic focus adjustment. This makes the machine especially economical, fast, and very easy to operate.
The system includes the following components:
- Manual loading/unloading table
- Enclosed cutting area with safety glass
- CNC graphic control with touchscreen
- Brilase Premium DRM-8 F150 laser source
- Cutting head with automatic focus adjustment
- Integrated cooling unit for cutting head and laser source
- CAD/CAM software for programming and optimized material usage (nesting)
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Waste box
- Work area lighting
- Multi-chamber extraction system
- Remote maintenance access
- Equipped according to CE directives
Isdpfowiqzqex Ah Djtn
DIMENSIONS:
Guideway machine length: 5,600 mm
Guideway machine width: 2,700 mm
Guideway machine height: 2,130 mm
Guideway machine height with open loading door: 2,725 mm
Extraction unit length: 2,500 mm
Extraction unit width: 1,400 mm
Space requirement according to layout: 8,500 x 5,500 mm
OPTION:
- Extraction unit with filters
- Shuttle table system for simultaneous loading/unloading and cutting to reduce secondary production times
- Further options such as Durma Cloud available on request.
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-FN 4 kW
Klic
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €191,106
Leasing rate: €3,611.90
Laser power: 4 kW
Manual table / Shuttle table: Shuttle table
Iedpfx Ajwiqtaeh Detn
Max. sheet thickness – mild steel: 20 mm
Max. sheet thickness – stainless steel: 10 mm
Max. sheet thickness – aluminium: 12 mm
Max. sheet thickness – copper: 6 mm
Max. sheet thickness – brass: 10 mm
Total connected load: 27.5 kW
Cutting area: 3060 x 1525 mm
X-axis: 3060 mm
Y-axis: 1525 mm
Z-axis: 125 (275) mm
Max. sheet size: 3048 x 1524 mm
Max. sheet weight: 240 kg/m²
Max. total weight for the double table: 2160 kg
Max. X-axis speed: 100 m/min
Max. Y-axis speed: 100 m/min
Max. simultaneous speed: 141 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Table change time: 25 s
Including delivery DAP, without unloading or indoor installation*
Including commissioning and operator training*
* Applies for delivery to Austria, other countries upon request
The HD-FN features two tables which are automatically exchanged in sequence to enable simultaneous cutting and loading/unloading.
The shuttle table is positioned longitudinally, providing optimal access for optional loading and unloading systems.
Control unit, laser source, and cooling system are integrated into the machine. The cutting head features automatic focus adjustment.
The system consists of the following components:
- Shuttle table (longitudinally positioned for best possible accessibility for optional loading and unloading systems)
- Enclosed cutting area with safety glass
- CNC graphic control with touchscreen
- Brilase Premium DRM-8 F150 laser source
- Cutting head with automatic focus adjustment
- Integrated cooling unit for cutting head and laser source
- CAD/CAM programming software incl. autonesting
- Positioning laser
- Sheet check system (automatic detection of sheet position and dimensions)
- Automatic nozzle cleaning
- Central lubrication
- Scrap box
- Work area lighting
- Multi-chamber exhaust system
- Light curtain protection for the shuttle table
- Remote maintenance access
- Equipped in accordance with CE regulations
OPTION:
- Extraction unit with filter module
mali oglas

237 km
Laserski stroj za rezanje
HESSE by DURMAHD-TC Compact 60250 - 3 kW
Klic
Stanje: novo, Condition: new
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €154,988
Ijdpfx Ahswiqr Ao Djtn
Leasing rate: €2,929.27
Laser power: 3 kW
Max. sheet thickness - mild steel: 12 mm
Max. sheet thickness - stainless steel: 6 mm
Max. sheet thickness - aluminium: 6 mm
Max. sheet thickness - copper: 3 mm
Max. sheet thickness - brass: 6 mm
Total connected load: 26.5 kW
Max. tube diameter: 250 mm
Min. tube diameter: 16 mm
Max. dimensions for square profiles: 160 x 160 mm
Max. dimensions for rectangular profiles: 200 x 150 mm
Max. profile length: 6000 mm
Max. profile weight: 58 kg/m
Positioning accuracy: +/- 0.2 mm
Repeatability: +/- 0.05 mm
Profile types: round, square, rectangular
Max. speed X-axis: 40 m/min
Max. speed Y-axis: 94 m/min
Max. speed Z-axis: 30 m/min
Max. speed A-axis: 510°/s
The system consists of the following components:
- Enclosed cutting area with safety glass
- CNC graphical control with touchscreen
- Brilase 3 kW Premium laser source incl. chiller
- Cutting head with automatic focus adjustment
- Manual loading
- Manual unloading table, 3 m
- Positioning laser
- Central lubrication
- Scrap collection trolley
- CAD/CAM software with auto-nesting
- Work area lighting
PRICE FCA TURKEY
OPTIONS:
- Extraction unit with filters
- Semi-automatic front loading system
- 6 m unloading table with conveyor unit
- Durma Cloud licence
- Laser source with 4 or 6 kW available on request
Olajšamo vam iskanje: "stroj za rezanje cevi"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Stroj Za Rezanje Cevi (124.866)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Pečatenje Stroj Za Rezanje
- Stroj Za
- Stroj Za Krivljenje Cevi
- Stroj Za Krožno Rezanje
- Stroj Za Mokro Rezanje
- Stroj Za Rezanje
- Stroj Za Rezanje Armã
- Stroj Za Rezanje Cevi Nit
- Stroj Za Rezanje Furnirja

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec