Polavtomatski upogibalni stroj, stroj za upogibanje cevi, trnovni upogibalni stroj, avtomatski upogi

MOBITEC BAH 1-2

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Fsdpsg U Uv Rsfx Ahmeph Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 250 h, številka stroja/vozila: 0131, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 48 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 180 °, skupna masa: 670 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 1, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, T U B O M A T – simply smart. TUB-C G3001 The pipe bending machine is ideally suited for single part and small batch production. Using the software, individual pipes can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Basic Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-level bending angle preselection or program operation - 80 memory locations for up to 10 sets - Set/actual value display for bending angle - Compact, forward-positioned bending head - Optimized tool concept - Hydraulic bending drive, operated with a proven hand lever - Hydraulic pipe clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extractor - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal basic drive unit for mounting attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbending) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection specs: 400 V / 50 Hz / 3-phase - Power plug: CEE 16 A - Colours: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package Pipe Bending Software - Oracle Express database for single-user application - Creation of isometrics (single tubes) - ConCSVImp – Interface for CSV format import - Calculation of bending data considering springback, elongation, and rebound - Verification of clamping lengths and start/finish lengths - Output of bending data (printout) - BendSim – Bending simulation and graphical display via parametric tool design - BendCon – Creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rollers with 25 mm mounting bore 1 clamp adapter assembly space 100 mm 1 support for fixed pressure die assembly space 100 mm Bending Tools Fpsdpfxjx E Rdwj Ahmeh Bending tools consisting of bending roller, clamping block, and fixed pressure die Tube Ø / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel pipes Design with lubricant channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly fittings for cutting ring connectors (L=light, S=heavy duty) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available. The machine is used but in like-new condition. The machine can be inspected and demonstrated by arrangement. The machine must be collected from us, but we can assist with loading. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º Fpsdjng Amkspfx Ahmjh OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Fodpfxefcw Apo Ahmoph Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Fpsdpsxcuicofx Ahmsh Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: rabljeno, Leto izdelave: 2004, vrsta goriva: plin, Lifting capacity in kg: 2,500 kg Lift height: 3,050 mm Fork length: 1,200 mm Load center: 500 mm Turning radius: 2,444 mm Travel speed: 22 km/h Front track width: 1,008 mm Rear track width: 932 mm Machine weight approx.: 3.64 t Fpjdpfor Dg H Eox Ahmeh Space requirement approx.: 3.8 x 1.25 x 2.25 m

Stanje: novo, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mount, shaft diameter: 80 mm Tool diameter: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 t Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1,400 kg 3 driven rollers Hardened standard rollers Hardened and ground tool mount, shaft Mobile control panel Horizontal and vertical operating positions Digital display Fedoh T Ulnopfx Ahmeph Compliant with CE standards

Stanje: rabljeno, Leto izdelave: 1999, Pipe diameter up to 60 mm Fpjdovvnm Sjpfx Ahmjh Machine weight approx. 1.8 t

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) Fpjdou Ibyyopfx Ahmjh The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm

Leto izdelave: 1990, stanje: dober (rabljeno), Offer 20191 Year of manufacture: approx. 1990, overhauled in 2002 Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bend angle selectable to the left and right - Hydraulic double-sided bending function Fpjdpfohrdmbox Ahmeh - Hydraulic feed - Drive: 400 V / 11 kW - Required space: approx. W 1750 x H 2200 x D 2300 mm - Weight: approx. 1600 kg - with bend angle adjustment - Hydraulic clamping - Bending tools