Stroj za upogibanje cevi

ERCOLINA Medibender MD 070

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Bsdpexdwbksfx Ag Tscw Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Na voljo je laminirna naprava Autobond za ploščate in toplotno odporne izdelke. Hitrost laminacije: 60 m/min, min. dimenzije pol X/Y: 285 mm/320 mm, maks. dimenzije pol X/Y: 1060 mm/1060 mm, razpon gramature papirja: 90g-650g/m², min. debelina laminirne folije: 24 µm, maks. pritisk valja: 6 t, maks. temperatura grelca/krmiljenja: 140°C/135°C. Dimenzije stroja X/Y: cca. 4000 mm/1600 mm, teža: cca. 2000 kg, delovne ure: 28785 h. Dokumentacija na voljo. Ogled na lokaciji je možen. Bedpfx Agexbrw Uj Tecw

Stanje: novo, Leto izdelave: 2025, Working width: 300 mm Working length: 1100 mm Brush diameter: 190 mm Brush speed: 1500 rpm Spindle diameter: 40 mm Number of brushes: 2 pcs. (metal + plastic) Maximum feed belt speed + stepless adjustment: 0–10 m/min Working height: 940 mm + 50 mm Maximum material height: 300 mm Suction port diameter: 2 x 120 mm Overall dimensions Length: 1240 mm Height min/max: 1350/1650 mm Width: 950 mm Bcjdsgykaujpfx Ag Tew Weight: 435 kg Total power: 4.65 kW Voltage: 400 V Robust housing for high stability Working height of 940 mm + 50 mm and max. material height of 300 mm give you the freedom to process large workpieces Two independent brushes (steel, plastic) with powerful motors and precise manual adjustment enable high product quality Two independent extraction units ensure effective removal of sawdust and debris The machine is built from high-quality materials, guaranteeing reliability and top-quality workpieces Stepless feed belt speed adjustment allows you to achieve smooth operation and the desired productivity Many years of manufacturing experience at Optimat enable us to meet even the highest demands – a machine tool for any budget.

Leto izdelave: 2009, Stanje: novo, Belt dimensions: 2000 x 100 mm Bedpfsx Davex Ag Tocw Belt speed: 30 m/s Angle adjustable from 30° to 90° Power: 3 kW, 400 V 50 Hz Weight: 200 kg Grinding rollers for pipe diameters: 3/4", 1/2", 1", 1 1/4"

Stanje: novo, Drill diameter: 2.0 - 20.0 mm Point angle: 90 - 135° Speed: 4800 rpm Voltage: 230 volts Motor power: 0.12 kW Weight: 8.6 kg Dimensions (L x W x H): 285 x 130 x 170 mm The compact drill bit grinding machine DG 20 M is ideal for sharpening twist drills made of HSS, cobalt, and carbide. Thanks to the adjustable point angle of 90° to 135°, this model is suitable for universal use with 2-flute twist drills. Features: - For grinding twist drills made of HSS and carbide from 2 - 20 mm - ER 20 and ER 25 collets also allow clamping of intermediate sizes - Optimum grinding results due to the specially guided collet - Includes device for thinning the drill tip - Universally adjustable point angle from 90° - 135° - Fast and simple grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 – 12 mm * 11 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 mm) - ER 25 collets, 14 – 20 mm * 7 pcs. (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20/ER 25 Bsdpfx Ajxablxog Tjcw

Stanje: dober (rabljeno), Leto izdelave: 1996, Pipe diameter: 6 – 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space required: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the control panel for presetting the bending angle, angle detection and measurement via absolute rotary encoder, automatic tool plate return, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulic on/off, mode selection, clamp open/close, advance/retract clamping, mandrel in/out, bend in/out, lock/unlock, mandrel lubrication, rotation device in/out, tool plate return, length stop forward, emergency stop. The machine comes from prototype production and was only used occasionally until 2000. Subsequently, the machines from this department were sold. The buyer never used the tube bending machine, so it has only been in storage since then and has not been operated (original paint). Bcjdevtgn Nopfx Ag Tew Machine at a special low price! This is a used machine, therefore sold under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Stanje: dober (rabljeno), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70 x 1.5 mm, min. Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. Ø 450 mm Angle profile capacity: 50 x 50 x 6 mm, min. Ø 400 mm Flat bar capacity: 50 x 10 mm, min. Ø 250 mm Flat bar capacity (hard edge): 100 x 15 mm, min. Ø 250 mm Box section capacity: 50 x 50 x 3 mm, min. Ø 500 mm Bcodpfxsw Hx Tvs Ag Tsw Shaft capacity: Ø 35 mm, min. Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Leto izdelave: 2024, Stanje: novo, This laser cutting machine is capable of processing sheets with a thickness of 3–4 mm. The Wattsan 1530 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working area of 1500x3000 mm. The precision feeding rollers on the Wattsan 1530 E facilitate material loading. The E-series metal laser machine offers a maximum traverse speed of 80 meters per minute. The laser output can reach up to 1.5 kW. The machine bed is manufactured from steel. For further details, please contact our managers by phone! Wattsan 1530 E Features Working area: 1500x3000 mm Laser power: up to 1,500 W Weight: 1,900 kg Virmer not only offers premium machines, but also comprehensive service and delivery solutions. Our engineers and managers are ready to answer all your questions and provide video support if required. In addition, all Wattsan equipment owners benefit from lifetime online support. Virmer is based in the Netherlands and operates across Europe. Virmer is the official distributor for Wattsan. We supply not only laser engravers, but also metal cutters, welding units, markers, and cleaning machines. Bcjdpfx Ajiicwljg Tjw Wattsan is a Chinese manufacturer with almost 15 years of experience in laser technology, continually innovating thanks to customer feedback. As a result of this feedback, Wattsan has implemented over 50 product upgrades, making their machines more reliable, precise, and powerful—helping you take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL HELP YOU CHOOSE THE RIGHT MACHINE FOR YOUR NEEDS. If you are searching for a suitable laser cutter or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and accessories with us: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber laser engraving machines; CNC milling machines for metal; milling machines for wood; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; metal laser cutters; CNC machines; laser markers; focusing lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary attachments; laser machine mirrors.

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 6424102096, Offer No. 25101 Technical Data: - Cutting capacity at 90° round 400 mm - flat B 400 x H 400 mm - Cutting capacity at 45° flat B 320 x H 320 mm - Cutting capacity at 60° flat B 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed, stepless 17 – 90 m/min - Hydraulic lifting/lowering of the saw frame - Cutting pressure, stepless adjustment 0 – 10 m/min - Total drive power 400 V / 3.5 kW Bcodpfswpincjx Ag Tow - Coolant system - Infeed roller conveyor 7000 mm - Outfeed roller conveyor with stopper & digital display 4000 mm - Required space approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Controller: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Remnant piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight: approx. 3.8 t Bjdpfxowm Rm Is Ag Tscw Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: 2500 mm infeed roller conveyor, chip conveyor, coolant system