Stisnjen Zrak Trebušne Prepone Črpalke Almatec nakup rabljenega (2.727)

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Kodpshk S Szofx Abbewt Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Kjdpfehk S Stex Abbswt Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2025, AL-KO Clean Air Dust Extractor Demonstration unit (no operating hours - as new) Kjdpfx Abebuvbrsbowt Technical Data Power Unit 250 P: Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Description: IE3 motor as standard Maximum airflow up to 8,500 m³/h at the fan Approx. 73 m² filter surface, residual dust content according to H3 Pre-separator as standard 71 dB(A) under full load (according to DIN EN ISO 11201) Already compliant with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system Inlet diameter: 350 mm Rated motor power: 11 kW Voltage: 400 V / 50 Hz Maximum airflow: 8,500 m³/h Rated airflow: 6,927 m³/h Negative pressure at rated airflow: 2,765 Pa Filter surface area: 73 m² Chip collection volume (net/gross): 3 x 165 l / 3 x 241 l Sound pressure level: 71 dB(A) Dimensions (L x W x H): 3,112 x 1,058 x 2,351 mm Weight: 1,074 kg Kodpjcqy I Sefx Abbswt Location: In stock at 54634 Bitburg

Leto izdelave: 1999, Stanje: rabljeno, Pump control system for centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump - Ebara: Servopress pressure switch - Pump: 230 V, max. 10 bar / 1.5 kW Kwjdpfx Abefdb Urobot - Price: per piece - Quantity: 2 units - Dimensions: 230/180/H240 mm - Weight: 1.8 kg

Stanje: rabljeno, Solenoid valve, directional valve, valve manifold, pump pre-load valve -Manufacturer: Rexroth, pump pre-load valve for control system SYDFE -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm Ksdpfognnbrjx Abbswt -Weight: 2.9 kg

Stanje: rabljeno, Centrifugal Pump, Water Pump, Submersible Pump Kwedpfsd Sf U Nox Abbot - Flow rate: 2 l/min - Motor power: 0.18 kW - Connection: 220-290/380-500 V - Speed: 2,700 rpm - Tropicalized: IP 44 - Dimensions: 190/131/H247 mm - Weight: 5.4 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Dvojbobenska spiralna vroča zračna peč neposredno iz zaprte tovarne McDonald's, uporabljena za predkuhanje burgerjev in nuggetsov. Ti stroji so namenjeni visokokapacitetnemu pečenju, žaru in soparjenju najrazličnejših izdelkov; stopnja priprave je določena s temperaturo zraka, hitrostjo zraka, zračno vlažnostjo in časom, ki ga izdelek preživi v sistemu. Električno ogrevana. Trak 96 m x 600 mm. Uporabljena od leta 2007 do 2016, ko se je pogodba preselila v drugo tovarno. Stroj je v odličnem stanju, na voljo imamo tudi vse ostale stroje iz tovarne – oblikovalce, cvrtnike, stroje za paniranje, filtre, spiralne zamrzovalnike, pakirne linije itd. Prosimo, upoštevajte, da fotografije verjetno prikazujejo dve različni peči, obe sta si zelo podobni. Kjdpfx Abjx Altfobjwt

Stanje: rabljeno, Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, pressure intensifier pump -Manufacturer: KSB, High-pressure pump Movichrom - G 3/5 PN25 G2 -Drive: 0.75 kW -Speed: 2810 rpm -Max. flow rate: 3 m³/h Ksdpfx Abef S Nchjbjwt -Max. delivery head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg

Stanje: rabljeno, Pump control unit for centrifugal pump, high-pressure pump, water pump, multistage vertical centrifugal pump -Manufacturer: Pentair Jung Pumpen, alarm device with float switch, unused, original packaging -Type: Alarm device AG10 JP44892 -Float switch: KT JP 46208 -Quantity: 2 alarm devices available -Price: per unit -Carton dimensions: 270/250/H140 mm Kwodpfx Absrwqb Sebjt -Weight: 2.0 kg/unit

Stanje: zelo dobro (rabljeno), Tekočinski prstanski kompresorji, vakuumska črpalka, rotacijska lopatična črpalka, rotacijska lopatična vakuumska črpalka, tekočinska prstanska vakuumska črpalka, batna črpalka - Proizvajalec: Flowserve, rezervni deli za tekočinsko prstansko vakuumsko črpalko .: glej slike Kwedpfsvmq Nwex Abbjt - Cena/dobava: komplet - Dimenzije za transport: 350/260/V180 mm - Teža: 13,4 kg

Stanje: rabljeno, Vacuum pump, rotary vane pump -Unfortunately: no type designation -Delivery rate: adjustable Kwedpefkpidjfx Abbot -Vacuum: adjustable -Dimensions: 530/320/H250 mm -Weight: 38 kg

Stanje: dober (rabljeno), Centerirna priroba motorja, priroba motorja, priroba črpalke, centerirni zvonec motorja, sklopčniški zvonec, nosilec črpalke za velike črpalke, hidravlična črpalka, oljna črpalka, zobniška črpalka - Majhen izvleček: Ø 75 mm - Velik izvleček: Ø 115 mm - Količina: 1x na zalogi - Cena: na kos - Dimenzije: Ø 180/H71 mm Kjdpfxjd Hi Aqe Abbewt - Teža: 0,6 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 243 m³/h, moč: 4,9 kW (6,66 KM), vhodna frekvenca: 50 Hz, vhodni tok: 10 A, vrsta vhodnega toka: trifazni, vrsta zaščite (IP koda): IP68, Ponujamo novo črpalko za umazano vodo Grundfos SE1.100.100.40.4.51D.B. Sestava vključuje: - 2x Grundfos črpalka; - krmilna omara Van der Linden; - montažni material; - montažne risbe. Tip: SE1.100.100.40.4.51D.B Kwsdpfx Aoya A Eujbbet Maksimalna višina črpanja (Hmax): 12 m Maksimalni pretok (Qmax): 229 m3/h Maksimalna temperatura tekočine (Tmax): 40 °C Frekvenca: 50 Hz Stopnja zaščite: IP68 Teža: 175 kg Skupaj 5 palet materiala. Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.

Leto izdelave: 2013, Stanje: rabljeno, 2 KSB centrifugalni črpalki s frekvenčno regulacijo iz kroga ledene vode hladilne naprave. Zmogljivost: 2 x 15 m³/h pri 2 bar Stroj (dodatno): centrifugalna črpalka Pretok: 15 m³/h Tlačni pritisk: 2 bar Dvilna višina: 20 m Kodpfx Aoxzqthebbswt Smer vrtenja: v smeri urinega kazalca

Stanje: dober (rabljeno), Electromechanical actuator for valves, valve actuator, actuator, servo motor, damper actuator, damper motor - Manufacturer: Siemens, damper actuator Kwjdpfx Absgg Tf Hjbjt - Model: SQN70.464A23 - Quantity: 2 units available - Price: per unit - Carton dimensions: 150/100/70 mm - Weight: 0.4 kg per unit

Stanje: dober (rabljeno), prevoženi kilometri: 163.850 km, moč: 115 kW (156,36 KM), vrsta goriva: dizel, Leto izdelave: 2008, Leto izdelave: 2008 Maksimalna obremenitev sprednje osi: 3800 kg Maksimalna obremenitev zadnje osi: 5700 kg Število valjev: 4 Kjdpfox Tpchox Abbjwt Prostornina motorja: 4.249 ccm Dovoljena skupna masa (zGG): 8.600 kg Medosna razdalja: 302 cm

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm Kwsdpfx Ajvz Hq Tjbbjt - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 Kodpfx Abjvz Hq Hjbewt The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm Kwjdpfx Abovz Hqyobjt - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg Ksdevz Hqtopfx Abbewt - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm Kwjdpfx Abovz Hqmobot - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Kwjdpfxjvz Hqgs Abbet Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm Kwodpfx Abovz Hhxebet - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, dolžina visokotlačne cevi: 10.000 mm, lastna masa: 155 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, The high-pressure cleaner Kärcher HDS 1295 is a highly efficient machine, suitable even for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical parts showing wear and signs of use were replaced with new ones, including ceramic pistons, seals, bearings, and all O-rings. This ensures long, trouble-free operation without the need for further investment in the machine in the future. Product Advantages: NEW PUMP HEAD The unit comes with new accessories, including a trigger gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A robust brass head with new ceramic pistons and seals guarantees long and trouble-free operation The powerful and efficient 3-phase motor provides excellent performance. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty tasks in construction, logistics, and agriculture. Each of our machines comes with individually made photos – you buy exactly the machine you see. Technical Data: Model: HDS 1295 Voltage [V]: 400 ~ 3-phase Pump Output [l/h]: 1200 Operating Pressure [bar]: 180 Max. Heating Temperature [°C]: 85-155 Power Input [kW]: 8.2 Hose Length [m]: 10 Fuel Tank [l]: 25 Weight [kg]: 155 Kwedsxa Egyopfx Abbst 2 Chemical Tanks [l]: 20+17 Equipment: NEW PUMP HEAD NEW trigger gun by German brand R+M NEW 900mm stainless steel lance NEW reinforced 10m steel-braided hose NEW 25° power nozzle Water filter and GEKA connector included for free in the set.