Spray Barva nakup rabljenega (2.830)

Leto izdelave: 2025, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Parts Cleaning System / Spray Cleaning System Type CM13, 2-Tank (Washing + Rinsing) including Air Knife Blowing Basket diameter: 1,300 mm (octagonal) Max. load capacity: up to 1,000 kg Basket loading and unloading is performed by the operator using a supply trolley positioned in front of the system (detachable/movable). Usable height: 800 mm Washing tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinsing tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 59 kW Control system: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + Manual intervention – additional manual cleaning by means of high pressure (up to 60 bar, infinitely variable; incl. foot switch / compressed air blow-off gun / LED lighting in the chamber) + Automatic water refill in both tanks + Automatic chemical dosing 1–10% (Dosatron) + Special spray system (can be optionally activated) for small components (= E-spray system) + Steam extraction with condensate return + Weekly timer for electric heating + Provision for retrofitting an oil separator + Media filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + Exterior cladding with stainless steel sheet + Complete system fully insulated + Tanks separated into two modules; fully insulated (different temperatures possible) + Vacuum suction gun for manual suction of parts with recessed geometries Gbodpev Tm Ayjfx Agyoi + Removable filter baskets in the return line + Stainless steel circulation pumps with mechanical seal and soft starter The system is on display at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: rabljeno, Rabljeni laboratorijski pršilni sušilnik Niro Mobile Minor iz nerjavečega jekla. Enota ima približno izparevalno zmogljivost 1 do 7 kg/h, odvisno od proizvoda. Ima komoro iz nerjavečega jekla, premera približno 800 mm in višine 915 mm. Komora je toplotno izolirana in oblečena. Opremljena je z električnim grelcem, ciklonom in cevovodom. Enota je nameščena na mobilnem ogrodju. Vključuje centrifugalni zračni atomizer Niro iz nerjavečega jekla. Gedpfx Asygvmrogyjbi Kliknite na spodnjo povezavo za ogled videoposnetka delovanja stroja.

Stanje: rabljeno, Pršilne kabine, Barvne hlape, Rabljena oprema Proizvajalec: Kematechnik Tip: IM-SZ-1,5-4000 Skupne mere: Širina: 1500 mm Globina: 2550 mm Višina: 2230 mm Gedpjw Tt Tvjfx Agysbi Leto izdelave: 2017 Pretok zraka: 4000 m³/h Moč motorja: 2,2 kW

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, B-Tec model M-800 Year of manufacture: 11/05 Own weight: 55 kg Approximate dimensions (mm): 1600 x 750 x 580 Washing chamber dimensions: 570 × 470 × 520 mm 1 × tank for recirculation medium Gbsdpjrt Rmnjfx Agysi Tank capacity max. 60 L 1 × tank for fresh medium Tank capacity max. 30 L Operating pressure: 6 bar -- Sale on behalf of customer --

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Brizgalna enota, tip 150, demontirana iz Arburg 420C 1000-350/150. Premer polža 35 mm. Komplet z hidravličnim motorjem, ventili itd. ZNIŽANJE CENE IZ 1200 NA 950 EUR!!! Gbjdpfx Asv Tp Ncsgyji

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Gjdox Ig Tmjpfx Agysbi Technical Data: Test chamber volume: 450 litres Unit weight: 140 kg (test chamber + machinery section; without brine and without test specimens) Brine storage tank: 180 litres Maximum loading capacity: 100 kg, 8 kg per support rod External dimensions: Height without hood 920 mm; height with hood 1370 mm; width 1930 mm; depth 800 mm Test chamber dimensions: Height 740 mm; width 850 mm; depth 570 mm Controller: Simcon/32 Condition: used Operating hours: 22,914 h Connection data: Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Power consumption: 450 Wh/h Brine consumption: approx. 0.5 – 1 litre per hour Compressed air consumption: approx. 1.5m³/h at 0°C and 1 bar Deionised water consumption: approx. 0.4 litre per hour Applications: Salt spray test as per DIN 50021 Condensation water test as per DIN 50017 Standard atmosphere (ventilation): DIN 50014 The unit has been serviced and calibrated annually by the manufacturer, no maintenance backlog (full service contract), last maintenance/calibration/DGUV3: 03/2025. The unit will remain connected to the mains until calendar week 3 and can be inspected. All installation, operating, and service manuals are available.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, GALATEK Barvalna / pršilna kabina, uporabljena za brizganje pohištvenih delov. Velikost kabine je približno 3x2,2x1 m. Vključno s sesalnim sistemom – glejte fotografije. Možna je prodaja tudi s tehnologijo za uravnavanje tlaka (stropni dovod zraka). Za več informacij me prosim kontaktirajte. Gbodpou Au Elefx Agyoi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RA9VE021000061, skupna masa: 2.000 kg, višina zlaganja: 300 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.600 mm, skupna dolžina: 7.000 mm, skupna višina: 1.500 mm, vhodna napetost: 400 V, vhodni tok: 16 A, Konica Minolta AccurioPress C3080 digital colour press, year 2018. The machine was initially used as a showroom demonstration unit, then transferred under a leasing contract in 2022. It was only operated briefly for a few months before being taken out of service following a business closure. After shutdown, the press was powered off, packed, protected, and stored under suitable conditions. The last meter reading, dated July 8, 2024, registers 18,562 black and white prints and 494,520 colour prints—very moderate volumes considering the machine’s rated capacity and expected lifespan. Gjdpfx Agex Syghoysbi The press is equipped, among other things, with the following options and modules: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heating and dehumidifier unit, MB-508 bypass tray, PF-707m suction feed unit, HT-506 thermo-regulator, FA-502 connection kit, FS-532 stapling module, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 booklet making and stapling unit, TU-503 head and tail trimmer, CR-101 creasing kit, FD-504 spine pressing module, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and monitoring connection.

Stanje: zelo dobro (rabljeno), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Test Chamber, model SAL 1000-FL PLC, ideal for industrial corrosion testing in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Special features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation, and air ventilation tests Technical details: - Outer material: stainless steel 1.4301, powder-coated (custom version) - Test chamber material: stainless steel, ECTFE-coated - Max. test chamber temperature: +80 °C - Temperature stability: ±0.3°K, over time ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Water consumption (humidifier): approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm - Including base cabinet: 2160 x 670 x 1890 mm - Internal test chamber dimensions (W x D x H) / Volume: 1400 x 605 x 920 mm / 1040 l - Max. load on specimen support rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W Gjdpexnyqvofx Agyjbi - Weight (empty): 350 kg Condition: used Scope of delivery: (see images) (Specifications and technical details subject to change and correction!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical data: Test chamber capacity: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Internal chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Salt spray test: ambient temperature up to +50°C Condensation water test: ambient temperature up to +45°C Humidifier: +75°C Temperature stability Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Gjdpfxow Hz Trs Agyebi Weight: 180 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test Chamber Volume: 450 liters Max. Load Capacity: 100 kg Brine Reservoir: 180 liters External Dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Gbjdpfxeudvg Re Agyji Test Chamber Dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion Testing: Salt Spray Test: Chamber temp. up to +50°C Condensation Water Test: Chamber temp. up to +45°C Humidification: +75°C Temperature Stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combinations: Salt Spray Test SS: DIN 50021 Condensation Water Test KFW: DIN 50017 Standard Climate (Ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and correction!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Köhler salt spray chamber. Gedpfx Ajn Arqdegyobi Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber room temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and error!) If you have any further questions, we will be happy to answer them over the phone.

Stanje: zelo dobro (rabljeno), Liebisch Type: S 1000 A-TR / 42016211 Chest-type apparatus with 1000 liters test chamber volume for salt spray tests. Constamatic® TR This series includes fully automatic chest-type devices of the A-TR type. Device operation is controlled via a touchscreen. All functions are displayed on a touchscreen with an intuitive user interface. Technical Data: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Test chamber internal dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Max. load capacity per sample rack: 10 kg per level Operating voltage: 230 V +6/-10% Connected load S: 2700 W Humidity control range S: up to / 70°C Test chamber temperature range K: up to / 50°C Test chamber temperature range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution reservoir: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 – 1.0 liters Water basin capacity, bottom tray KON: 15 liters Weight: 450 kg Godpfxewf Dh Nj Agyebi Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SWT 200/400 Weiss Spray and Splash Water Test Cabinet Used for testing the ingress of water into enclosures. With a programmable timer, the test cycle can be automated with an adjustable duration from 3 seconds to 30 hours. According to DIN VDE 0470 T1 / EN 60529 for IPX3 and IPX4 protection rating tests. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable swing angle - Interchangeable oscillating tubes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data: Maximum test specimen load (evenly distributed): Permissible test specimen weight for carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests: Oscillation speed: approx. 60°/s Swing angle IPX3: approx. ± 60° Swing angle IPX4: approx. ± 180° -10° Gedpfxovzz A Rj Agysbi Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors. All information is subject to change!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machine Model: FAPC 3000 The new FAPC models have been developed to work with the latest development, etching, and stripping chemicals for the production of printed circuit boards, metal nameplates, and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber: 450 mm Rinse chamber: 280 mm Spray bars (top): 4 in process chamber, 1 in rinse chamber Spray bars (bottom): 4 in process chamber, 1 in rinse chamber Nozzle type: Poly V-jet – ¼ turn removable Nozzles per bar: 3 + 4 for process, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact distributor systems. Flow/pressure regulation: Adjustable across the full range, top and bottom. Conveyor speed control: High torque. AC drive motor system powered by a precision inverter with digital displays for accurate operator reference Speed range: 45 mm – 1.6 m/min Temperature range: Ambient temperature up to 50°C ±1°C Temperature controller: Digital Liquid level sensors: For heater and pump Manual reset for over-temperature protection Voltage: 220 / 240V 50Hz (13A plug) Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Including drip tray Gbedpfx Aged R Trkjyei Type: FAPC 3000 Condition: used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Gsdpfx Agewc Nvgsyobi Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Tip: SC/KWT 450 Solna pršilna komora Tehnični podatki: Prostornina preizkusne komore: 450 litrov Največja obremenitev: 100 kg Rezervoar za solno raztopino: 180 litrov Zunanje mere: višina 920 mm, širina 1930 mm, globina 800 mm Mere testne komore: višina 740 mm, širina 850 mm, globina 570 mm Gedpfow Strcsx Agysbi Področja uporabe: Korozijski testi: Test s solnim pršenjem: temperatura komore do +50°C Test s kondenzacijsko vodo: temperatura komore do +45°C Vlažilec +75°C Temperaturna konstanta Časovno odstopanje temperature: ±K Napetost: 1/N/PE AC 230V ±10% 50Hz Nazivna moč: 2,0 kW Nazivni tok: 8,7 A Kombinirani testi: Test s solnim pršenjem SS: DIN 50021 Test s kondenzacijsko vodo KFW: DIN 50017 Normalna klima (prezračevanje): DIN 50014 Teža: 180 kg Stanje: rabljeno / used Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Here we offer you a Köhler salt spray chamber. Salt spray chambers: - Versatile testing options, from standard salt spray tests to fully automatic cyclic corrosion tests - Easy operation via graphical menu navigation - Custom designs available for a wide range of applications - Simple operation via touch panel Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient +5 to 60°C Humidifier temperature: Ambient +5 to 75°C Power supply: 230V 1PH 50/60Hz 2000W Compressed air: 4.5 – 8.0 bar / 3Nm³/h Brine reservoir: 140 liters Construction: Stainless steel Fully overhauled and upgraded to Comfort control system - All electrical components renewed - All hose connections renewed Type: HK 500 Weight: 400 kg Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) Gbsdpfx Agsnr Hi Soyoi For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Köhler Model: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion tests according to international standards such as ISO 9227 (NSS, AASS, CASS). It is mainly used in the automotive and metal industries to test the resistance of materials and coatings against corrosive environments. Technical Features Model: Köhler HKS 1500 Test volume: approx. 1000 liters Chamber type: Front- or top-loading Control: Touch panel for easy operation Temperature range: Room temperature up to approx. 50 °C Materials: Corrosion-resistant inner lining, e.g., polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber allows both standard salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical Data - Salt Spray Cabinet: Test room material: Polypropylene RT to +55 °C Test room temperature range/salt spray heating/salt spraying: Indirect via chamber walls Temperature range - Condensation: RT to +50 °C Temperature range - Humidifier: RT to +75 °C Heating: Indirect via chamber walls. Temperature consistency +/- 1.0 K Temperature control: Digital, 0.1 °C resolution (plain text display), Digital regulation, heating control via electronic relays without power disruptions Salt solution supply: approx. 200 h of continuous spraying or external Humidifier supply: automatic filling Fog generation: dual-substance nozzle made of acrylic glass Air flow: 3.0 m³/h Precipitation rate: regulated by electronic dosing pump Dimensions: Internal: Width 1030 mm, Depth 880 mm, Height 1100 mm External: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Gbsdpfowit Erjx Agyji Rated voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) / (condensation) 2.0 KVA Compressed air connection: min. 4.5 bar, max. 8.0 bar Water connection (deionized water): min. 2.0 bar, max. 6.0 bar Disposal: Fog drain NW32, condensate drain NW32 Weight: 450 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) For further questions, we will be happy to assist you by phone.

Stanje: dober (rabljeno), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Testing Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (WxDxH1/H2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions (WxDxH): 2162 x 995 x 2080 mm Operating temperature range: 5°C above ambient up to +80°C Heavy-duty configuration for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 program memory slots, 50 segment memory slots, ramps: humidity/temperature control across the entire working range, Ethernet interface Electrical connection: 400 V, 50 Hz, 5700 W Mains water: min. 2.5 bar, 3/4" tap connection, external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Godpfx Aget Igc Soysbi Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end OD 75 mm Operating modes: Salt spray Condensation (CWC) Ambient air ventilation Heated air Controlled humidity

Stanje: zelo dobro (rabljeno), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used for testing water ingress into enclosures. When paired with a timer, the test cycle can be automated for adjustable durations ranging from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for insulation class testing according to protection ratings IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and replaceable nozzle holder - Adjustable and monitored water flow volume - Programmable test duration control Mechanical Load Data: - Max test specimen load (evenly distributed): - Permitted test load on specimen carrier (total): 25 kg - Spray radius: 200 mm / 400 mm IP Protection Class Test Data: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal chamber dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not part of the sale." Gbjdpfxsxg Hrke Agyoi Condition: used Scope of delivery: (see picture) (Specifications subject to modifications and errors!) For further questions, please feel free to contact us by phone.

Stanje: novo, SprayClean Spray Cleaning Machines SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable detergents. SprayClean models feature extensive thermal insulation on fluid tanks, steam extraction, pneumatic front doors, and a motorized basket system as standard. Gsdpfxo T D R Do Agyjbi Optional rinsing and drying processes can be integrated into these models according to customer requirements. Multi-stage systems are controlled via a PLC (programmable logic controller) system. Optional accessories include oil skimmers, oil separator units, filtration units, dosing pumps, loading trolleys, cabin housing insulation, and more. Rotary Washing System as Front Loader: Cleaning by high-pressure hot water spray, available in various build sizes: basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, loading heights from 500 to 900 mm. Depending on the model: washing, washing & rinsing, or washing, rinsing & drying processes are available in a single machine. Special requirements can be accommodated on request. We would be happy to provide you with a detailed quotation.

Stanje: novo, Leto izdelave: 2024, RHS Spray Cleaning System Standard equipment includes: - Single washing tank. - Basket movement via gear motor (option to select fixed, tilting, or full rotation modes). - Siemens PLC – allows creation and management of washing programs. - Timer to set washing duration. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Full system thermal insulation. - Magnetic/electronic control for proper door closure. - Level sensor / protection against low water level. - Automatic water filling system. Gbsdpfxorywyao Agyji - Steam extractor. Available in various configurations with: - Bag filter 50-100 micron. - Drying unit with fan and electric heaters. - Oil separator. - Drainage pump. Technical specifications: - Load capacity: Single basket 670x480xh.400 mm or two baskets 450x300xh.200 mm each. - Maximum permissible weight: 100 kg. - Tank volume: 400 litres.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, UNION CM10 SP TWIN Double chamber: Chamber no. 1 for washing, no. 2 for cooling, each equipped with 3 pneumatic doors. Through-feed type: baskets are loaded from one side and unloaded from the opposite side, completing the full process cycle. Parts are loaded using a mobile trolley on the wash chamber side, pass through the cooling chamber, and are then unloaded from the cooling chamber side. • Automatic transfer between chambers via shuttle system. • Basket rotation with safety clutch. • Capability to load a basket with ø1060 mm, usable internal diameter 980 mm. • Usable internal height: 1000 mm / Max load: 500 kg. • Washing tank: 280 L, with automatic level restoration and axial stainless steel washing pump. • Dosatron detergent dosing system on wash tank, adjustable 3–10%. • Rinse tank: 250 L, with automatic level restoration and axial stainless steel washing pump. Gbedpfxor Duq Us Agyji • System constructed in AISI 304 (except floor safety tray, external frames, and external panels, which are painted steel). • Safety tray at base of unit. • Complete thermal insulation. • 2 external trolleys with drip trays + 2 baskets ø1060 mm, usable internal diameter 980 mm. • Automatic doors with safety barriers. • 3 filter bags (2 on wash cycle 25 micron, 1 on rinse cycle 10 micron). • Union DC60 oil separator. • High-pressure blower, fitted with lateral air knife. • Drying fan with electric heating elements. • Vapor extractor. • Drainage pump. • 2 cooling fans. (Water Chiller NOT included in offer). • SIEMENS S7-1200 PLC with KTP 700 BASIC TOUCH PANEL + Gate Manager for remote service.

Stanje: novo, Leto izdelave: 2024, Spray Cleaning System SM11 Supplied as standard with: - Single washing tank. - Basket movement driven by gear motor. - Timer to set washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic lid closure control. - Level sensor / low-level protection. - Tank drain with ball valve for bath replacement. Available in various configurations with: - Full system thermal insulation. - Bag filter 50-100 micron. - Steam extractor. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air knife. - Oil skimmer. - Automatic water filling. - Discharge pump. Gedpfx Agerwmyhsysbi Technical specifications: - Basket diameter: ø1100 mm. - Usable internal height: 700 mm. - Maximum load capacity: 250 kg. - Tank volume: 260 l.