Sicke nakup rabljenega (181)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, stiskalna sila: 120 t, dolžina mize: 600 mm, širina mize: 600 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 120 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine features heating plates sized 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety functions, making it particularly suitable for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Specifications + Information: Vulcanizing Press Hidrobrasil – Heating Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating press / Vulcanizing press - Pressing force: 120 t (max. 1,600 kN) - Pressure range: 30 – 120 t - Machine weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table height above floor: 850 mm - Minimum hall height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening width per compartment: 200 mm - Min. opening: 200 mm ==== Table and Ram - Table size: 600 × 600 mm - Ram size: 600 × 600 mm - Heating plates: 600 × 600 mm (optional) ==== Forces - Free demolding force: max. 200 kN ==== Speeds - Rapid traverse speed: up to 40 mm/s - Opening speed: up to 40 mm/s - Pressing speed: 5 – 15 mm/s ==== Hydraulics - Operating pressure: max. 240 bar - Pressure buildup time: approx. 4 sec - Pressure buildup time (steel on steel): max. 8 sec - Pressure accuracy: ± 5 bar - Pressure holding valve: up to 1,800 sec - Automatic pressure adjustment - Oil volume: approx. 300 l (HLP 46) - Main pump: Bosch Rexroth gear pump approx. 48 l/min Bsdpfxsk S Dt Te Apnedi - Max. oil temperature: 55 °C - Max. ambient temperature: 40 °C ==== Cooling and Lubrication - Circulation oil cooling - Oil temperature monitoring - Automatic lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermal neutral: 80 – 120 °C ==== Controls and Operation - Control panel integrated in control cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limit by pressure or position - Signal light (Red/Yellow/Green) ==== Safety - Light curtain (SICK / Leuze, 14.1 mm, front) - Monitored rear door - Machine body double-coated ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic motor connection: 15 kW - Total connected load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, try-out press, tool try-out press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 400 t, Hidrobrasil Four-Column Hydraulic Press – 400 t – 2,700 × 1,700 mm – Stroke 1,000 mm For sale is a hydraulic four-column press manufactured by Hidrobrasil, offering a pressing force of 400 t. This machine is designed for continuous shift operations and, thanks to its powerful twin-cylinder design with piston accumulator, provides exceptional dynamics combined with efficient energy consumption. Comprehensive automation and adjustment options make this press an ideal solution for demanding production and forming processes. ===== Technical Data & Details: Hydraulic Four-Column Press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-column press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 52 t - Overall height: approx. 5,700 mm - Number of operator sides: 2 ==== Working Area - Max. opening: 1,600 mm - Stroke: 1,000 mm - Min. opening: 600 mm - Table height above floor: 820 mm - Minimum tool height: 600 mm ==== Table & Ram - Table size (clamping area): 2,700 × 1,700 mm - Total table size: 3,400 × 1,700 mm - Ram size: 3,400 × 1,700 mm - Column diameter: 250 mm - T-slots: 28 mm – customer-specific - Table top: precision milled ==== Speeds - Closing speed: 100–450 mm/s - Opening speed: 50–250 mm/s - Press speed: 5–60 mm/s ==== Hydraulics & Drive Bdedpfx Apeg Iihwjnei - Hydraulic components: Bosch Rexroth / Parker / HAWE - Main motor power: 90 kW - Piston accumulator with approx. 4 nitrogen bottles - Circulation oil cooling (adjustable) - Pressure holding valve: 0–600 sec - Pressure build-up time: max. 2 sec - Pressure accuracy: ± 5 bar ==== Control & Operation - Control: Siemens S7-1500 - Touchscreen: 15" Siemens - Operator panel: swiveling - Operating modes: setup, single stroke, continuous stroke, programmable mode - Pressure adjustment: 50–400 t via touchscreen - Stroke limitation by pressure or position - Free positioning of ram - Siemens remote service unit (SECOMEA Ethernet) ==== Equipment - Automatic lubrication (adjustable) - Oil temperature monitoring (adjustable) - KEYENCE light curtains (14 mm) front and rear - Safety components from SICK - Side-monitored safety doors (1,200 × 1,000 mm) - Two-hand operation on both sides - Preparation for automatic material feeding - RITTAL switch cabinet (can be placed up to 20 m away) - Stress-relieved components (table, ram, press head) - Machine body primed and painted ==== Accuracy - Parallelism deviation: ± 0.1 mm - Deflection: ≤ 0.17 mm/m ===== Forming technology, deep drawing, pressing processes, series production, large-part manufacturing, automated production Hydraulic press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in compliance with German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards as they fully comply with all aspects of the national Brazilian safety directive NR 12, which builds upon these standards.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, funkcionalnost preizkušena; Izdelek izhaja iz demontaže opreme avtomobilskega dobavitelja Proizvajalec: SICK Tip: AT20E-PM111 (serija AX20) Kategorija: matrični senzor / detektor roba Funkcija: detekcija roba, merjenje premerov/širin, primeren za reflektor Razdalja zaznavanja / merilno območje: 25 mm / merilno območje 20 mm Bdjdjzh Ankspfx Apnei Izhod: PNP / analogni (4–20 mA) odvisno od različice Zaščitni razred: IP67 Temperaturno območje: −10 … +55 °C Dimenzije: kompaktna izvedba (glej podatkovni list) Teža: ca. 0,14 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, AMADA MODEL ITS2 50-20 HIDRAVLIČNA CNC UP-STROKING 5-OSNA UPOGIBNA STISKALNICA 50 TON x 2000, KOMPLETNA S CNC KRMILNIKOM OPERATEUR 1 ZA 4 OSI Elektronska zaščita Erwin Sick na stroju, bočna in zadnja preklopna ograja Bdedpfx Aepygydepnoi leto: 1993 Opis: TIP HIDRAVLIČNA ZGORAJ NAVZGOR DELUJOČA UPOGIBNA SILA: 50 TON DOLŽINA UPORABE: 2000 mm ODPRTA VIŠINA: 370 mm DOLŽINA HODA: 100 mm GLOBINA VRATU: 400 mm ŠIRINA MIZE: 60 mm ŠTEVILO OSI: 4 KONFIGURACIJE OSI: X1-X, Y1-Y2, R1-R2, HRBTNI PRISLON Možnost demonstracije pri napajanju BROŠURA IN DODATNE INFORMACIJE NA VOLJO NA ZAHTEVO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, AMADA, model HFE 103-3, hidravlična upogljalna preša z delovno silo 100 ton in dolžino upogiba 3000 mm, opremljena s krmilnikom OP 2000 z 7 osmi (7-osni CNC), ERWIN SICK, na stroj nameščene elektronske varnostne zaščite, stranska in zadnja zaščitna ograja, ki se med seboj zaklepata. Model: Amada HFE 100-3, upogljalna preša s CNC krmiljenjem in navpičnim gibom. Leto izdelave: 2004 Delovna sila: 1000 kN Tip: OP 2000 CNC Krmljene osi: Y1, Y2, X, R1, R2, Z1, Z2 Maksimalna dolžina upogiba: 3000 mm Odprišina: 470 mm Hod: 200 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 1–10 mm/s Hitrost vračanja: 1–100 mm/s Količina olja: 110 LITROV Moč motorja: 11 kW Teža: 6800 KG CNC krmilnik Hod zadnje letve (os X): 700 mm/s Maksimalna dolžina letve: 1000 mm Os R: 250 mm Bdedpfx Apoyt H Awsnsi možnost demonstracije delovanja BROŠURA IN DODATNE INFORMACIJE SO NA VOLJO NA ZAHTEVO.

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table area: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Pin hole in ram: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-speed hydraulic press Robust welded frame construction. Mode selection via selector switch: inching, two-hand, foot or continuous operation with feed Press is equipped with a side-mounted piece counter EMERGENCY STOP switch With stroke limiter Bdjdpfju Nfmyex Apnsi Press force adjustment possible With overload protection (pressure relief valve) With shock-absorbing system Light curtain SICK optical electronics prepared (can be reactivated as an option)

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Številka zaloge: 070236 Dobavni rok: takoj, možnost prodaje medtem Država izvora: Turčija Cena: 6900 € Mesečni obrok lizinga: 133,17 € Na zalogi: 1 Teža tuljave: 500 kg Maks. zunanji premer tuljave: 1200 mm Min. notranji premer tuljave: 400 mm Maks. notranji premer tuljave: 550 mm Maks. širina tuljave: 300 mm Min. širina tuljave pri različici s pnevmatsko pritiskalno roko: 80 mm Dolžina: 1450 mm Širina: 1200 mm Višina: 1640 mm Teža: 260 kg Motoriziran pogon Mehansko nastavljiv nosilec tuljave s 4 čeljustmi Regulacija hitrosti za hitrost odvijanja ter čas pospeševanja in zaviranja Fotoelektrični senzor bližine SICK za nadzor ohlapnosti pnevmatska pritiskalna roka Alternativne možnosti (cene po dogovoru): Različica brez pnevmatske pritiskalne roke Bdodjwirmuepfx Apnoi Različica brez pogona, z zavoro, z ali brez pnevmatske pritiskalne roke

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 40 t, Spotting Press – Manufacturer HIDRALMAC – 40 t Tryout Press – Table 1,000 × 700 mm Available for immediate sale is a hydraulic spotting press from HIDRALMAC with a pressing force of 40 t. The machine features an extendable, tiltable, and rotatable table, a daylight opening of 1,200 mm, as well as a modern monitor-based control system. It is ideally suited for spotting, adjustment, and tryout work in tool and mold making. ==== Technical Specifications & Information: Spotting Press HIDRALMAC – 40 t Tryout Press ==== General Information - Manufacturer: HIDRALMAC - Model: Spotting Press - Type: Tryout / Spotting Press - Pressing Force: 40 t - Machine Weight: approx. 9 t - Required Floor Space: approx. 4,000 × 4,400 × 1,800 mm ==== Working Area - Daylight Opening: 1,200 mm - Stroke: 1,050 mm ==== Table System - Table Size: 1,000 × 700 mm - Table Extension Travel: 1,050 mm - Table Tilting Angle: up to 50° - Table Rotation: 180° - Table Travel Speed: 25 mm/s - Max. Table Load: 5 t ==== Tool Mounting - Upper tool fold-down: up to 180° - Ram plate hydraulically fold-down: up to approx. 175° ==== Hydraulics and Drive - Main Cylinder: 1 unit - Hydraulics: Bosch Rexroth - Motors: WEG ==== Speeds - Approach Speed: 100 mm/s - Return Speed: 100 mm/s - Working Speed: 0–10 mm/s (adjustable) ==== Control System - Siemens control with monitor (9") - 200 program memory slots - USB interface - Remote function for service and maintenance - Adjustable: pressure, stroke, speed - Linear measurement system for position monitoring - Stop point and changeover programming ==== Safety - SICK light curtains (1,250 mm) - Complete monitoring of working area ==== Equipment - Control panel on swivel arm - Two-hand operation on movable stand - Work area lighting - Electrical cabinet to the left of the machine - Maintenance balcony with marine ladder - Heavy-duty welded construction to DIN 8651 - Columns and cylinders made of SAE 1045 (C45), induction-hardened and chrome-plated Bjdpfx Ashtm E Nepnedi ==== Scope of Delivery - CE certificate - Operating manual and technical documentation (German) ===== Spotting operations, tool adjustment, tryout applications, mold making, tool making, tryout work, alignment processes, tool handling Spotting press, tryout press, tool try-out press, tool adjustment press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is the construction of special purpose machines and press automation. We supply bespoke hydraulic presses at surprisingly attractive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 55.000 h, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 36.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840 D, število osi: 3, This 3-axis portal milling machine, Unisign uniport 6000, was manufactured in 2010. It offers an impressive X-axis travel of 10,000 mm, a Y-axis travel of 1,500 mm, and a Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and an automatic tool changer with 30 positions. If you are looking for a high-quality milling machine, you should consider the Unisign uniport 6000 gantry milling machine, which we are offering for sale. Contact us for more details. • Required space: approx. 12 x 11 m • Clearance: height 1,000 mm / width 1,500 mm • Maximum torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capabilities (C45): Drilling Ø 120 mm / Tapping M55 / Milling 100 cm³/min • Design: Gantry construction with movable portal bridge and stationary clamping table • Table configuration: clamping strips in transverse direction, spaced 750 mm apart (standard table plates omitted) • Tool changer: automatic tool change; 30-position chain magazine mounted on portal column (tool changes into angle head possible) • Operating mode: pendulum machining possible • Cooling: machine cooling unit; water-air heat exchanger integrated in the control cabinet • Coolant system: dry operation; pre-equipped/prepared for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer service in 2023 • Installation: machine recessed and anchored in a machine pit Additional equipment: • Angle drilling and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare probe Hexagon RWP 20.50-M • Hydraulic clamping device with clamping bridges for axle machining, including hydraulic power unit • 1x T-slot clamping plate (2,500 x 1,200 mm) as an alternative to the hydraulic device • Chip conveyor: hinged belt type • Safety fence with Sick light grids Bjdpfx Aey A Ifmopnedi • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Partition wall with viewing window • Installation and leveling elements • Various spare parts • Documentation included Technical specification: Taper size SK 50

Stanje: rabljeno, Leto izdelave: 2015, Pregled Tradicionalna linija za polnjenje penin, kot so cava, šampanjec in druge peneča vina, ki vključuje postopke od pretresa in zamrzovanja vratka steklenice, preko dekorgiranja, doziranja, zamašitve in namestitve žične kapice, do nameščanja kapsule, etiketiranja in zapiranja kartonske škatle. Stroji imajo kapaciteto od 1.800 do 2.500 steklenic na uro. Ponudbo dopolnjujeta dva nerjavna rezervoarja. Linija se prodaja kot celota; žiro palete in oba rezervoarja so na voljo tudi posebej. Tehnični podatki - Izdelek: Penina, tradicionalna metoda (cava, šampanjec) Bsdjz E U D Nopfx Apnedi - Kapaciteta: 1.800 do 2.500 steklenic na uro, odvisno od stroja - Oblika steklenic: Bordeaux in Burgundy/Cava - Leto izdelave: 1987 do 2018 - Napajanje: 380–400 V, 50 Hz Obseg dobave - Žiro palete | ADRESSES INDUSTRIE | 504 S | za kovinske košare z 504 steklenicami ali paketi po 500, približno 6.000 steklenic na serijo, nadzorna omara | 1998 - Izravnalni manipulator | DALMEC | PARTNER PMC | pnevmatičen, maks. nosilnost 80 kg, glava za prijemanje steklenic, prazni kletke v hladilnik vratka steklenice | 2005 - Hladilna naprava za vratke steklenic | TALLERES URPINAS | G+20 B | glikolna/solna kopel pri -25 °C, zaslon na dotik, 2,28 kW, 380 V, 2.000 steklenic na uro | 2005 - Monoblok za dekorgiranje in doziranje | PERRIER | odstranjevanje kronkorkov, izpihovanje ledene trske, doziranje in uravnavanje ekspedicijskega likerja, približno 50.000 steklenic od zadnje generalne revizije, originalni priročnik za uporabo, 2.500 steklenic na uro | 1987 - Stroj za zamašitev | AROL | GEMINI F | zamašitev s pluto (naravna pluta), enojna glava | 2015 - Stroj za namestitev žičnih kapic | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monoblok s strojem za zamašitev, dovod ploščic za žične kapice, nagnjen dolgotrajni magazin za žične kapice, zaslon na dotik, 400 V, 50 Hz, originalni priročnik za uporabo, 2.000 steklenic na uro; lij za dovod in sortiranje plut je na voljo kot opcija | 2015 - Stroj za obračanje/homogenizator | FORNS | za neprekinjeno delovanje, meša ekspedicijski liker v vino, 2.500 steklenic na uro | 1987 - Tunel za pranje, sušenje in pihanje | CAMES | WDT-1 | zunanja obdelava, visoko hitrostni zvočni curk zraka, 400 V, 50 Hz, 700 kg | 2018 - Aparat za namestitev kapsul | C.M.A.R. | razdelilnik kapsul s pregibnimi in gladilnimi glavami | 2001 - Stroj za etiketiranje | PRIMA INDUSTRIES | PLM 1500 | samolepilni, 3 postaje za etiketiranje plus ovratnik za vratke, poravnava kapsule s točkovnimi in UV senzorji, optične pregrade SICK, zvezdasta kolesa za 75-mm (Bordeaux) in 89-mm (Burgundy/Cava) steklenice, 3 kW, 400 V, 1.800 steklenic na uro | 2018 - Stroj za zapiranje kartonske škatle | SIAT | SK2-S | zapiranje s lepilnim trakom na zgornji in spodnji strani, 380 V, trifazni | 2015 - Rezervoar z mešalom | DECALSA INDUSTRIAL | 12.200 l, mešalo, grelni in hladilni serpentini, nadzorna omara | 1988 - Rezervoar | MAGUSA | DPG | 10.000 l, AISI 304 | 2000 Stanje Rabljen, še vedno nameščen in v uporabi. Redno vzdrževan; večina strojev je imela od nakupa samo enega lastnika. Razpoložljivost Takoj na voljo. Možen ogled. Lokacija: Španija.

Stanje: rabljeno, Leto izdelave: 1982, Tlak 40 t Razdalja med stojali 695 oz. 215 mm Hod 100 mm Površina za namestitev na mizo 650 x 440 mm Površina batnice 580 x 285 mm Vgradna višina 400 mm Skupna potrebna moč 15 kW Dimenzije stroja (dolžina x širina x višina) 1,63 x 1,05 x 2,61 m - z vlečnim blazinom Bdsdpfxjtqqq Rs Apnoi - z optično pregrado SICK

Leto izdelave: 1997, stanje: rabljeno, Tehnične podrobnosti: Tlak: 250 t Hod: pribl. 400 mm Prehodna širina: 640 mm Višina mize nad tlemi: 900 mm Bdjdpfx Apeu Nfn Renoi Hitrost batnice: nastavljiva Prehod v stranskih stojalih: 470 mm Vpenjalna površina mize D x Š: 570x550 mm Vpenjalna površina batnice: 570x550 mm Skupna moč: 56 kW Teža stroja pribl.: pribl. 9,0 t Mere stroja pribl. D x Š x V: 2,5x1,8x3,8 m Transportne mere D x Š x V: 2,6x1,8x3,1 m - Upravljanje ročno in samodejno prek PLC Allen Bradley - Enoročno in dvoročno upravljanje - Vodilo batnice štiristebrično, brez zračnosti - Način nastavljanja in samodejno delovanje prek PLC (trenutno ne deluje) - Nameščene svetlobne zavese tipa Sick in varnostne zavese - Ni oznake CE i.D.

Stanje: rabljeno, Preverjeno delovanje; artikel je iz demontaže opreme pri avtomobilskem dobavitelju Na voljo: 8 kosov Proizvajalec: Sick AG Modeli: M40E-64A523RB0 + UE403-A0930 Tip: Varnostna svetlobna zavesa z muting krmilno enoto Višina zaščitnega polja: 640 mm Domet: do 30 m Ločljivost: 30 mm Varnostna kategorija: Tip 4, SIL3, PL e Napetost: 24 V DC Muting: integriran 2-/4-žarkovni muting (UE403-A0930) Bsdpszgayhsfx Apnedi Uporaba: paletiranje, transportna tehnika, robotske celice

Stanje: rabljeno, Max. sheet thickness: 1.25 mm steel Bsdehlnv Hepfx Apnjdi Roll center distance: 63 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, delovna širina: 3.100 mm, stiskalna sila: 170 t, delovno območje: 3.100 mm, AMADA CNC stroj za upogibanje s 170-tonskim hidravličnim spodnjim gibanjem, 3100 mm Z AMADA OPERATEUR II 8-osnim CNC krmiljenjem Opis: TIP: Hidravlično spodnje gibanje KAPACITETA: 170 ton KRMILJE: AMADA OPERATEUR II ŠTEVILO OSI: 8 (vključno z Z1 in Z2) DOLŽINA UPIGANJA: 3100 mm ODPRTA VIŠINA: 450 mm DOLŽINA HODA: 180 mm Bdjdpfx Apjv Iftgsnsi GLOBINA VRATU: 410 mm MOČ MOTORJA: 15 kW SPREDNJE ZAŠČITE: Elektronske zaščite ERWIN SICK, nameščene na stroju STRANSKA ZAŠČITA: Ograja ZADNJA ZAŠČITA: Zaklenjena TEŽA: 11 ton

Stanje: zelo dobro (rabljeno), stiskalna sila: 100 t, širina mize: 3.000 mm, delovna dolžina: 3.000 mm, Prodamo rabljeno, zelo kakovostno in zelo čisto CNC prešo Ursviken EKP Optima 100 3.1 / 2.55, 3-metrska x 100 ton. Rabljena CNC stiskalnica Ursviken na voljo – video si lahko ogledate na dnu oglasa. Pullmax Ursviken Optima EKP CNC 100 3.1/2.55 preša (press brake) CNC Tehnične specifikacije: - Pritisk: 100 t - Dolžina upogibanja: 3100 mm / 3 metre - CNC krmilnik Cybelec DNC 7000 - Skupaj 6 osi Stroj je opremljen z integrirano mizno enoto za izvajanje varnostnih robov in zaključnih upogibov (flashings) v dolžini 3 metrov. Bodpstwyuuofx Apnjdi Hrbtna šablona: 2 prsta na zadnjem omejevalniku Stroj je popolnoma servisiran. Opcijsko priložen velik izbor orodij, kot je razvidno iz fotografij. ————— Teža: 8.400 kg Stanje: dobro ohranjeno PULLMAX URSVIKEN EKP CNC 100 3.1 / 2.55, 100 ton x 3.100 mm, hidravlična stiskalnica s spodnjim (downstroke) gibanjem in 6 CNC osmi naprodaj. Krmilnik Cybelec DNC 7000 Zaščita: Sick varovala Osi: y1, y2, r, x, z1 in z2, upravljane prek Cybelec krmilnika.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), The system includes: (1) KUKA KR 150-2 2000 industrial robot, (2) SPATZ spot welding system, (3) OMRON camera inspection, (4) SICK light barrier. Operating hours: 2,602 h. Bodpfjgqkpmex Apnsdi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1997, AMADA MODEL ITS2 103 100 TON X 3000 HIDRAVLIČNA CNC UPSTROKING PREŠA S 5 OSMI, POPOLNOMA Z OPERATEUR 1 5-OSNIM CNC KRMILJENJEM Elektronska zaščita Erwin Sick nameščena na stroju, bočna in zadnja zaščitna ograja z varnostnimi stikali. Leto: 1997 Št. zaloge: 01853 Opis: tip hidravlični upstroking. Ukrivljalni pritisk: 100 ton Dolžina upogibanja: 3000 mm Odpiralna višina: 370 mm Dolžina hoda: 100 mm Globina grla: 400 mm Širina mize: 60 mm Število osi: 5 Konfiguracija osi: X1-X, Y1-Y2, R1-R2, zadnji doraz. Višina stroja: 2340 mm Moč motorja: 9 kW Bodeh H Duhjpfx Apnedi Možnost demonstracije stroja pod napetostjo. Brošura in dodatne informacije na zahtevo.

Leto izdelave: 2000, stanje: dober (rabljeno), Uporabljena stiskalnica/izsekovalni stroj Amada TP150ex, 150-ton Električna stiskalnica Amada TP150 EX s podajalnikom Atkin BHP in odvijalnikom Atkin BHP Leto izdelave: 2000 Specifikacije: Model: Amada TP-150EX Lastna teža: 16 ton Dodatna oprema: varnostne zaščite Sick Hidravlična zaščita pred preobremenitvijo Pogonski sistem z nastavljivo hitrostjo Hidravlično vpenjanje orodja Kapaciteta: 150 ton Bedpfx Asn Smg Tepnodi Dobavljeno novo: julij 2000 Hod: 175 mm Delovna površina mize: 1250 x 750 x 160 mm Površina bata: 700 x 550 mm Nastavitev bata: 100 mm (motorizirana) Višina orodja: 390 mm Idealno za preoblikovanje pločevine za avtomobilsko ali zračno industrijo. Na voljo tudi nove stiskalnice s C ali H okvirjem.

Stanje: rabljeno, Leto izdelave: 1984, Tlak: 100 t Izteg: 320 mm Hod: 138 mm Površina mize: 850 x 550 mm Vgradna višina: 385 mm Vsebnost olja: približno 500 l Površina bata: 560 x 450 mm Skupna potrebna moč: 30 kW Teža stroja: približno 6,5 t Potreben prostor: približno 1,5 x 2,0 x 3,0 m - Stroj je bil leta 2008 obnovljen Bdsdot Dctrjpfx Apnei - Zaščitni pokrov delovnega prostora s svetlobno pregrado Sick - Vgradna višina: 580 mm - brez velikega bata z izmetalnikom in objemko - Preureditev hidravličnega sistema na proporcionalni ventil - Preureditev omarice za upravljanje - električno merjenje poti Naslednja dela so bila izvedena v našem podjetju: - Stroj je bil tehnično pregledan - Stroj je bil ponovno prebarvan - Siemensov mehki zagon, na dotik občutljiv zaslon - Pred dostavo se izvede aktualni pregled v skladu z UVV (uredba o varnosti in zdravju pri delu) z merjenjem časa zaviranja Stroj je varen za ročne operacije pri odprtem orodju.

Stanje: rabljeno, SICK varnostna svetlobna zavesa C40S-1301AA030 + C40E-1301BH030 Proizvajalec: SICK Bsdpfx Apozcw Dwjnjdi Stanje: rabljeno, dobro ohranjeno Tip: varnostna svetlobna zavesa Oddajnik: C40S-1301AA030 Sprejemnik: C40E-1301BH030 Serija izdelka: C4000 Višina varovalnega polja: 1350 mm Ločljivost: 30 mm Varnostna kategorija: Tip 4 po IEC 61496 Zaščitni razred: IP65 Vrsta priključka: M12 priključek Napajalna napetost: 24 V DC Področje uporabe: zaščita oseb pri strojih in avtomatiziranih sistemih Na voljo: 4 kosi

Stanje: rabljeno, SICK varnostna svetlobna zavesa C40S-1001AA030 + C40E-1001BH030 Proizvajalec: SICK Stanje: rabljeno Tip: varnostna svetlobna zavesa Oddajnik: C40S-1001AA030 Sprejemnik: C40E-1001BH030 Serija izdelka: C4000 Višina zaščitnega polja: 1050 mm Ločljivost: 30 mm Varnostna kategorija: Tip 4 po IEC 61496 Bdsdpszcw S Uefx Apnei Stopnja zaščite: IP65 Tip priključka: M12 konektor Napajalna napetost: 24 V DC Področje uporabe: Zaščita oseb pri strojih, proizvodnih in avtomatiziranih proizvodnih linijah Značilnost: zaščitna naprava brez dotika

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1.302.981, skupna masa: 280 kg, nosilnost: 20 kg, doseg roke: 1.813 mm, model krmilnika: KR C4 NA UL, Brez minimalne cene – zagotovljen prodaj po najvišji ponudbi! Ponudba vključuje samo robota, brez zaščitnega ogrodja! Zaščitno ogrodje je mogoče dokupiti za 3.500 €. TEHNIČNE PODROBNOSTI Nosilnost: 20 kg Doseg: 1.813 mm PODROBNOSTI O STROJU Nadzor: KR C4 NA UL Skupna teža: 280 kg Delovni čas: približno 500 ur Bdsdjzvmm Tjpfx Apnji OPREMA Ročni upravljalnik Zaščitno ogrodje s programirljivo logično enoto Siemens 2 × laserski skener SICK 4 × svetlobne pregrade

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, stiskalna sila: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. The machine is designed for demanding forming processes in industrial continuous operation and, thanks to its multi-cylinder technology, high dynamics, and comprehensive control and monitoring functions, offers a precise and powerful solution for complex applications. ===== Technical Data & Information: Hydraulic Four-Column Press – 500 t Bododyynvjpfx Apnodi ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Type: Hydraulic Column Press - Machine designation: Forming Press - Pressing force: 500 t (max. 550 t with reserve) - Machine weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Clearance: 2,100 × 1,500 mm - Installation height: 1,500 mm - Stroke: 1,000 mm - Table height above floor: approx. 850 mm ==== Table & Ram - Table size: 2,100 × 1,500 mm (with T-slots) - Ram size: 2,100 × 1,500 mm - Total table plate size: approx. 2,750 × 1,600 mm - Total ram plate size: approx. 2,750 × 1,600 mm ==== Speeds - Approach speed: 300 mm/s - Return speed: 300 mm/s - Pressing speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total power requirement: 62 kW - Return force: 40 t - Main cylinders: 2 units - Auxiliary cylinders: 2 units - Axial piston pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic block: Rexroth - Oil tank volume: approx. 2,000 l - Pressure control via PLC (min. 50 t) - Pressure holding time: 0–900 sec - Energy saving through automatic pump shut-off when tool is closed ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector stroke: 300 mm (adjustable via PLC) - Ejector speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with pressure and position programming - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Operator panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light curtains by SICK (1,500 mm, front) - Monitoring of hydraulics, pumps, and temperature - Synchronous monitoring of main cylinders with automatic correction - Pressure monitoring with automatic retraction or holding function (± 5%) ==== Construction & Features - Main cylinder column diameter: 360 mm - Auxiliary cylinder column diameter: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - 8 mm polycarbonate safety glazing in working area and doors - Liquid channel around table (25 mm radius) ==== Additional System - Nitrogen compression unit (up to 280 bar, connectable) ===== Forming technology, heavy forming, series production, large-part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Stanje: dober (rabljeno), Leto izdelave: 2021, Transportni trak, tračni transporter, transportni trak, ploski tračni transporter - Proizvajalec: Montech, tračni transporter tip TB30 z dvojno trakom in svetlobnim senzorjem - Hitrost: 87 m/min - Pogon: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 - Širina traku: 2x 15 mm - Transportna dolžina: 1290 mm Bsdpfjyia Ensx Apnjdi - Svetlobni senzor: Sick WTB9-3P2261, ni priključen - Transportne dimenzije: 1290/390/V260 mm - Teža: 14,5 kg