Scm Si 320 nakup rabljenega (571)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, We offer for sale a wide belt sander SANDYA 16-S RRCS 1350. The machine is fully operational and has seen little use. It has served as an auxiliary machine for special projects. STANDARD EQUIPMENT: * Control panel * Electric adjustment of working height * Digital readout of working thickness * Conveyor belt made of natural rubber * Automatic centering and tensioning of conveyor belt * Movable rubber pressure rollers before and after the sanding units * Flexible steel pressure bar before the first sanding unit * 2 roller supports with 2 non-driven rollers at machine infeed and outfeed * Electronic oscillation of sanding belt * Extraction ports designed to minimize air consumption * "Hand protection" emergency device at workpiece entry * Safety switches at the front and rear of the machine * Lockable main switch * Automatic "star-delta" switch for main motor * Main motor overload protection * Automatic brake for immediate shutdown of sanding units * Automatic emergency shut-off in case of: - Sanding belt breakage - Lack of sanding belt tension - Lateral deviation of sanding belt - Lack of compressed air - Main motor overload * Electric motors with IP54 insulation class TECHNICAL DATA: - Working width: 1,350 mm - Min./max. working thickness: 3–170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: - B/23: Reading bar for sectional pads with 23 sections FIRST UNIT "R": Tsdpfxewq Efms Abgef - Steel calibrating roller, diameter 200 mm, 18/5 kW - Pneumatic On/Off selector for first roller, actuated by pneumatic cylinder, including micrometric adjustment according to sanding belt thickness - Oscillating blower for cleaning sanding belt of the first unit, including: • Electronic positioning • Timed activation synchronized with workpiece presence • Extraction port, filter, and pressure regulation SECOND UNIT "R": - 250 mm diameter roller, 55SH rubber sanding roller, 15 kW - Pneumatic On/Off selector for second roller, actuated by pneumatic cylinder, with micrometric adjustment - Reverse motion of second unit THIRD UNIT "CS": - Sanding roller, diameter 175 mm - Electronic sectional pad on third unit with LOGIC TS electronic programmer • Distance between sections: 60 mm • Working pressure adjustment - Pneumatic On/Off selector for third roller Roller supports at infeed and outfeed for long workpieces Fixed cleaning unit at outfeed Electronic positioning of the working table The machine was purchased new from an authorized SCM Polska dealer and has been serviced exclusively by SCM's authorized service. Last calibration performed: 16-01-2025. Machine available from mid-July. Working hours: 589h.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AE/020112, skupna širina: 1.300 mm, skupna masa: 2.750 kg, število valjev: 4, Brez minimalne cene – prodaja zagotovljena največjemu ponudniku! PODROBNOSTI STROJA Skupna širina: 1.300 mm Električni podatki Tsdpfxsxmhiwo Abgjf Nazivna napetost: 400 V Frekvenca: 50 Hz Faze: 3 ~ Nazivni tok: 180 A Kratkostični tok: 10 kA Maks. obremenitveni tok: 420 A Teža: 2.750 kg OPREMA Dva zgornja valja Dva spodnja valja Opomba: Stroj je bil demontiran v okviru likvidacije in je naložen na tovornjak. Ob razstavljanju je bil popolnoma delujoč.

Stanje: pripravljen za uporabo (rabljen), working width 900 mm Tedpfow Dqy Nsx Abgof steel calibration roller combi aggregate with rubber roller motor power 11 kW pneumatic shoe shot-blasting automatic pneumatic oscillation via photo sensor workpiece thickness gauge electric table adjustment star/delta start-up power supply 380 V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Overall table length 2600 mm Todpfewx Nkiex Abgef Planing width 500 mm

Stanje: zelo dobro (rabljeno), Wide belt sander SCM Sandya RT90 Working width: 900 mm Working height: 3–155 mm Number of sanding units: 1 Combined unit with pad Pneumatic oscillation Two sanding speeds Main motor power: 11 kW Tsdpfxow A Ikio Abgef Abrasive belt dimensions: 2300 x 900 mm Extraction port diameter: 160 mm

Stanje: rabljeno, številka stroja/vozila: 007983, Pozicija 1: Eno-stranski lepilni stroj za robove SCM-STEFANI KDR Tedpfx Ajwqndljbgjf Pozicija 2: Sistem za vračanje plošč SCM-STEFANI KDR

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times Tsdpfx Absvwd U Isgof - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, I am selling a wide belt sander SCM Sandya 16 S 110, year of manufacture 2012. Configuration: - 18.5 kW hard rubber sanding drum - 15 kW hard rubber sanding drum - 11 kW combination unit: soft rubber drum + pneumatic pad - Working width: 1100 mm - Pressure rollers for short workpieces - Compressed air cleaning for all units - Total weight: 2750 kg Todpfx Aeihfawebgsf - 3 motors: 18.5 + 15 + 11 kW - Complete documentation included Condition: LIKE NEW! The machine has seen very little use. Available immediately.

Stanje: dober (rabljeno), Tehnične značilnosti: • Najmanjša širina plošče: 55 mm • Najmanjša dolžina plošče: 140 mm • Minimalna/maksimalna debelina plošče: 10 - 60 mm • Debelina roba: 0,4 - 3 mm • Največja debelina letvice: 12 mm Tjdoi E S Rljpfx Abgsf Komponente in funkcije: • Sestava • Kalibracijske enote • Polnilec za robne trakove • Enota za čelno rezanje • Enota za obrezovanje • Obdelava robov • Enota za zaokroževanje • Strgalo za robove • Krtače

Stanje: zelo dobro (rabljeno), 4-sided DOUBLE END PROFILER LINE, currently configured for INTERIOR DOORS, Consisting of the following machines: Tsdjwzmbqspfx Abgsf X10023A) CELASCHI powered roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER Model TSA 3 B 480 A Installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER Model TSA 2 B 360 Installed total power: 65 kW

Stanje: zelo dobro (rabljeno), Wide Belt Sander SCM Sandya 3 Working width: 950 mm Number of sanding units: 2 1st unit: steel roller 2nd unit: combination – rubber roller + sanding pad Pad automatically engaged Oscillation with photocell sensors Two feed belt speeds Feed speed: 4.5 / 9 m/min Motor power: 7.5 kW Abrasive belt size: 1900 × 970 mm Todpjwn H Tgofx Abgof

Stanje: rabljeno, številka stroja/vozila: 007186, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint trimming: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Tedpou T Tuwefx Abgef Working units: 10 units

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Dodatenčna oprema: - Vakuumski motor: poganjan preko frekvenčnega pretvornika do 7,5 kW, integriran v okvir stroja - Transportni trak: gumirani transportni trak trdote 50 Shore - Motor dovodnega traku: 4 kW, poganjan preko frekvenčnega pretvornika - Konzola: integrirana z računalnikom eye-M in elektronskim upravljanjem Maestro Pro Sand, sistem Tele Service, 21,5" LED LCD barvni zaslon - Programi: 1999 delovnih programov - Krmilni sistem: interaktivno odpravljanje napak, samodiagnoza, Full HD zaslon z multi-touch zaslonom, programska oprema Maestro Pro Sand - Obratovalna temperatura: +5 do 35°C - Dodatne funkcije: virtualna tipkovnica, proizvodno poročilo, prikaz električnih in pnevmatskih shem, uporabniški priročnik. Ta tračna brusilka SCM DMC SYSTEM je bila proizvedena leta 2021. Ponaša se z delovno širino 1.350 mm in hitrostjo podajalnega traku med 2–16 m/min. Opremljena je z elektronskim upravljanjem PRO SAND in PLC terminalom z 10,4" LCD barvnim zaslonom, ki omogoča napredno uporabniško izkušnjo. Stroj ima več delovnih enot za raznolike brušilne naloge ter je poganjan preko frekvenčnih pretvornikov za natančno regulacijo hitrosti. Za več informacij o tem stroju nas kontaktirajte. Tjdpfx Ajw H D S Rjbgef Uporabna področja: - Brušenje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, I am selling the window construction angle line SCM Multiflex. - Milling heads: VIVALDI EU68mm Todpfx Abehw Dfysgsf - Cutting and tenoning spindle on the right / tenoning side - 2 pcs. profile milling spindles + glazing bead crosscut saw on the left / profiling side - Available immediately.

Stanje: rabljeno, Four-Sided Planer Moulder SCM P64/B Specification: • Condition – inspected, ready to work • Manufacturer – SCM • Model – P64/B • Working width – 180 mm • Working height – 120 mm • Vertical spindle motors – 1 x 5.5 kW • Horizontal spindle motors – 4.0 and 5.5 kW • Feed motor – 1.5 kW • Total power – 16.5 kW • Electrically adjustable planing height • Manually adjustable planing width • 4 spindles, 35 mm diameter • 4 cutterheads with standard disposable knives 50x12x1.5 mm • Vertical profiling heads, height-adjustable (as on a shaper with low spindle) • Extra-long infeed table, 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • Pressure rollers with spring tension • Table lubrication pump • Extraction nozzles Ø 120 and 150 mm • Weight – approx. 1,110 kg • Overall dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown depict the actual condition of the item for sale Tjdpfx Aswzyc Uebgof • Machine available immediately

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): No. 2 Hogging units (2 x 5.8 kW approx.) No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Tsdpol Hydmofx Abgef Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher

Stanje: zelo dobro (rabljeno), SCM Sandya Uno CS wide belt sander Working width: 900 mm Working height: 3–160 mm Tsdpewic H Sefx Abgjf Number of sanding units: 1 Sanding unit configuration: COMBI (steel roller + pad) Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930 × 1525 mm Weight: 830 kg

Stanje: zelo dobro (rabljeno), SCM Machining Center Todpfxjwmxkus Abgsf

Stanje: zelo dobro (rabljeno), SCM F3A Surface Planer - Planing width: 300mm - Table length: 2100mm - Three-knife cutterhead Tedpfx Ajwzyuqobgsf - Weight: 290kg - Fence tiltable up to 45° - 3 HP motor - 380 Volt

Stanje: rabljeno, Leto izdelave: 1992, used Make: SCM Model: Compact 220 S Year of manufacture: 1992 Machine no.: 110830 GS-certified for wood dust Number of spindles: 4 Spindle arrangement: bottom-top-right-left Motors: 4 / 5.5 / 4 kW Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle diameter: 40 mm Table length: approx. 2500 mm Knife system: Tersa 230/125 Pre-cutting cutter Pneumatic pressure rollers Infeed ahead of the jointer Feed speed: 5–20 m/min Profiling Sliding rollers Extraction connection: 4 x 120 mm Tedpfx Asw En H Nobgof Required space: approx. 3000 mm x 1400 mm x 1600 mm Weight: approx. 1500 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty

Stanje: zelo dobro (rabljeno), Breitbandschleifmaschine SCM Sandya 20 - max. Schleifbreite: 135 cm - max. Schleifhöhe: 20 cm - automatische Tischpositionierung - Erste Einheit: gummierte Kalibrierwalze, 3-Gang-Motor, 730 U/min 4,5 kW, 1470 U/min 7,5 kW, 2940 U/min 15 kW - Zweite Einheit mit Schleifschuh, automatisch, segmentiert, Durchschuss, Leiste mit Encoder, 3-Gang-Motor, 730 U/min 4,5 kW, 1470 U/min 7,5 kW, 2940 U/min 15 kW - Bürste + Leiste mit Ausblasvorrichtung - Vakuumtisch - Bandabblasung - stufenlose Vorschubgeschwindigkeitsregelung Tsdpfx Ajwpb Dpsbgjf - Gewicht: 3 t - Abmessungen: Länge 230 cm, Breite 200 cm (mit 240er Motoren), Höhe 245 cm Die Maschine ist in sehr gutem Zustand, das Vorschubband ist gepflegt, die Kalibrierwalze ohne Beschädigungen.

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 EDGING PROCESSING (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Tjdpfx Aok Nk R Djbgjf Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: rabljeno, širina skobljanja: 500 mm, SCM F5L Surface Planer - Working width: 500 mm - Main motor power: 4 kW - 4-knife cutterblock - Traditional knives - Main fence adjustable up to 45° Tedpfxowb Er Ij Abgef - Table length: 2,600 mm

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): Tjdpfxswhi Slo Abgef - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving panel (workpiece), stationary machining head – horizontal panel (workpiece) configuration Control system: Xilog Plus 2 (software: Xilog Plus 2) Machining head safety enclosure. Separate electrical and control panel No. 2 Safety interlock workpiece clamps within the working area Equipped with automatic panel pusher Infeed table (with conveyor belt) – outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z): 250 x 70 x 10 mm (2 x 5 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1300 x 80 mm (2 x 40 mm) Simultaneous processing of two workpieces (in Z-axis) UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 48 Independent vertical drilling spindles No. 10 Independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 Grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit), vertical main spindle power 7.5 kW LOWER MACHINING UNITS: No. 48 Independent vertical drilling spindles No. 10 Independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 Grooving saw unit – diameter 125 mm Tedpfx Abefz I Ufegef No. 1 x HSK63F vertical main spindle (milling unit), vertical main spindle power 7.5 kW Glue injection nozzles and dowel insertion unit. Automatic dowel magazine for inserting dowels