Rob Lepilo Stroj nakup rabljenega (30.870)

Stanje: rabljeno, številka stroja/vozila: 008247, Tip pritrjenega roba: tanek rob, debel rob Lepilni sistem: PUR Hedpfxszbrn Uj Abxonn Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 008249, Tip nameščene robne obloge: tanka rob, močna rob Hnedpfx Abozbrl Texjn Lepljenje: PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 25 m/min Največja debelina plošče: 60 mm Delovni agregati: 8 kos

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0-200-24-0779, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, skupna dolžina: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left. Year of manufacture 2015. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Maximum workpiece thickness 60 mm - Motorized height adjustment of upper pressure unit - Workpiece support with roller rails - Glue pot lift for feed stop - Glue roller clamping in front of trailing edge of the workpiece - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with 2x4kW (clockwise/counterclockwise), operation-controlled Horizontal positioning via NC motor (CAN bus) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA glue - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered, 4 non-powered pressure rollers Hnjdpsy A I Sgsfx Abxon POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors at 0.8 kW each (front/rear edge), for chamfering/straight cuts and excess trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 corner rounding unit, 2 motors (top/bottom) with motorized fine adjustment, controlled from operating panel, equipped with various interchangeable heads with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper, top/bottom - Flat scraper, top/bottom - Buffing unit, top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Stanje: dober (rabljeno), Leto izdelave: 2011, Single-sided edge banding machine, right-hand version, with workpiece return system for hot-melt glue and/or PU gluing, used, year of manufacture 2011; approx. 8,700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Min. width: 70 mm, Min. height: 8 mm, Max. height: 60 mm, Min. length: 150 mm Feed speed: 14 – 20 m/min, infinitely variable Glue application: Glue application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: Height: 1,600 mm, Width: 1,100 mm, Length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double pressure roller unit with electronic positioning - Pneumatic control of all units from the central touch-screen panel via Beckhoff industrial PC - CM – CombiMelt gluing system: Processing units: - Fk – Jointing unit for edge processing of particle boards with 2 HF motors 2.2 kW, 200 Hz, 12,000 rpm, working in both directions, path controlled. Tool: DIA jointing cutter set Ø 85 x 45 x 30, z=3, for panel thickness up to 42 mm - AKM – Edge magazine for automatic feeding of strip edges, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine Automatic roll retraction. Holds four edge rolls. With variable edge chute for quick edge changes. With automatic selection menu. - K 13 – DOUBLE END TRIM UNIT with 2 HF-motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° Hsdpfx Abszb Iuqexonn - K 160 – 2 HM SAW BLADES 140 x 3.2 x 16 mm, Z 36 - Bfc – FLUSH MILLING UNIT for pre-milling of applied edges, operating against feed direction. Single-sided sensing, adjustment via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, z 4 (HF70). - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, Z 4 (HF70), optionally also equipped with radius tools - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide radius reversible planer heads (AR 73), Ø 73 x 16 x 16, z 3 for R1 – R3 inserts. - AKF – AUTOMATIC CONTOUR TRIMMING with two separate work spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm Tool: 2 PCD diamond radius cutters Ø 73 x 13 x Ø 16 With integrated dust extraction. - AZK 4 – automatic SCRAPER CHANGER UNIT - ZKf – SURFACE SCRAPER UNIT with fine-sensing device for residual hot-melt glue removal on the joint area – with extraction. Additional equipment: - AS – Antistatic spray unit, double, on the glue joint - GS – Glide spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spray unit and fine buffing device for surface cleaning - KEO-c – EDGE POLISHING UNIT, oscillating and automatic feed. 2 motors 0.2 kW, with 2 cloth wheels - WE – Angle infeed aid as folding pusher slide, for narrow parts. Interface for workpiece return system Ligmatech ZHR 05 or equivalent

Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH" STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units. The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface. Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling. Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter. Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions. Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed. Hjdpfxjxy Tm Ij Abxsnn Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels. External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width). E-TOUCH PC control system enables fast and easy execution of main functions, including: – Processing of programs in "Just in Time" mode – Possibility of management via parts lists – Management options through ...

Leto izdelave: 2023, obratovalne ure: 5.027 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Ponujamo zelo dobro ohranjenega robotskega manipulatorja Halter CNC Automation Millstacker Premium 25 za CNC rezkalne stroje, letnik 2023. -- Zelo malo delovnih ur Prilagoditve, ki so bile izvedene po naročilu in odstopajo od serijske opreme: 1. Dodana individualna odlagalna pozicija (pri nas po toboganu v vodno kopel). Pri tej nastavitvi je lahko z neobdelanimi kosi opremljenih vseh 12 skladiščnih pozicij – pri odlaganju na mizo je to možno le pri 11 pozicijah. 2. Individualna prilagoditev smeri postavitve v magazinu. Tako je možno daljše/večje kose polagati vzdolž med palice, kadar vstavljanje preko diagonalnih kotov ni več mogoče. 3. Dodatno izdelan komplet daljših podpornih palic za varno pozicioniranje večjih kosov. V primeru vprašanj ali če potrebujete več informacij, nam pišite ali nas pokličite. Hnedjy Nmmiepfx Abxen

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Hnodpjzc Agkefx Abxsn Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 - Net weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Hsdpfx Aer A Eq Rjbxsnn Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Hsdpjhy Tlrjfx Abxonn Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. Hnodpfjl D Rp Ejx Abxen The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed Hnsdpfxjlc Ewio Abxen End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Hjdpewiwnqefx Abxenn Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Hnsdpfx Abouxqzuexon Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Hnodpfx Abstt Da Doxjn Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Leto izdelave: 2020, obratovalne ure: 4.450 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, COMANDULLI Model OMEGA 60 SX • Belt direction: LEFT to RIGHT, overhauled in 2020 #06701 • Thickness reduction & profile milling support, tiltable at 45 degrees, manual height and lateral adjustment • 1 top / 1 bottom milling support • 6 edge polishing heads D=130 mm on double pendulum joint • 1 pneumatic lower chamfer / 1 upper chamfer support • Water drip groove milling support, manual height and lateral adjustment • Separate control panel on swivel arm • Table extension console • Water tray • Required space approx.: 620 x 200 cm • Infeed and outfeed conveyor each 200 cm The machine can be inspected in operation by appointment. Current pictures and videos from last week. Hnjdpfxezb H U Ao Abxjn Price details • EXW from machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not part of the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for dispatch Warranty • Machine is sold as is, excluding any warranty claims Inspection possibility • In operation near Hanover Availability • After delivery of the new machine, approx. November 2026

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Popolnoma avtomatski sistem za dvojno peskanje Rösler, avtomatiziran z industrijskimi roboti, čistilne komore z 2 puhaloma vsaka, vsaka z dvema zabojema za nakladanje in razkladanje, letnik proizvodnje 2011, vključno z mokrim separatorjem. Hedpfxjzb Dqhj Abxenn

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Ott robni lepilni stroj model EUROMATIC-FÜ - Letnik 2003 - BL-F avtomatsko vhodno vodilo, ogrevano - FÜ – lepilna enota - KM avtomatski magazin za robne trakove - RM-V avtomatski magazines za kolute - Lepljenje 0,4–15 mm - Predgretje robnega traku - K16 – dvojna enota, nastavljiva za 15°, žagine plošče 140x3,2x16 - HF 10.1 enota za poravnavo zgoraj in spodaj, vključno z orodjem - HFF – enota za posnemanje zgoraj in spodaj, vključno z orodjem - HFR – zaoblitvena enota zgoraj in spodaj, vključno z orodjem - AR 4 – 4-motorna enota za kopiranje vogalov, vključno z orodjem - ZK – profilna strgala, vključno z orodjem - KE-G – stroj za končno čiščenje robov - ZKF – strgala za površine, vključno z orodjem Stroj je še vedno mogoče ogledati in preizkusiti pri stranki. Hnodpfxoy S Rz As Abxon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Ott Atlantic V/12 Edge Banding Machine Pre-milling unit End trimming, 2 x milling, radius scraper, surface scraper Edge thickness: 0.2 - 12 mm Hjdpfx Astdz Tqebxenn Minimum workpiece width: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min Condition: very lightly used Year of manufacture: 2001 Price: 10,000

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), Höfer edge sanding machine Sanding belt dimensions: 3000 x 200 mm Oscillating sanding belt Veneer sanding device Hsdpfx Ajlnalfsbxjnn Mobile CE compliant

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Hnjdswka N Tjpfx Abxsn Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Stanje: Preverjeno delovanje Hedpfx Abew I U E Asxenn Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Stanje: trenutno še v proizvodnji Oprema in tehnični podatki: Hnedpfx Asw Nadgobxen Lepljenje max. 8–55 mm Vklj. z vrtljivim upravljalnim pultom HF-spojni agregat z dvema motorjema Vklj. z izmenljivim hitrogrelnim bazenom, teflonsko prevlečenim Vklj. z elektronskim pozicioniranjem pritisnih valjev Vklj. z nagibnim dvojnim čelilnim agregatom Vklj. z izravnalnim rezkalnim agregatom Vklj. z agregatom za posnemanje posnetja, radija in vogalov z nesting paketom Vklj. z radijskim vlečnim nožem z nesting paketom Vklj. z ravninskim vlečnim nožem Vklj. z utornim agregatom Vklj. z polirnim agregatom Vklj. z razpršilno enoto Razpoložljivost: kmalu Skladišče: Flörsheim

Stanje: rabljeno, Leto izdelave: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial feed chain 1"1/4 Jointing milling unit FI-502 Gluing unit VC-710 Cut-off unit IN-801 Hjdpfx Absv R Nk Uoxsnn Top and bottom flush trimming unit RS-100 2 motorized multifunction/form milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC with 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Max. workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness (coil): 0.4–3 mm Edge thickness (strip material): 0.4–22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, jointing: 120 mm Glue tank capacity: approx. 3 kg Heating time at half fill level: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return conveyor shown in the images Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2010, Gebrauchtý stroj Rok výroby: 2010 s jednotkou pro srovnávání a zaoblování rohů Ovládací panel s LCD displejem a klávesnicí Srovnávací jednotka se 2 protiběžnými diamantovými frézami s přívodem hrany pro páskový a proužkový materiál s lepicím válcem a lepicí jednotkou s předem zastřihováním z role s přítlačnou sekcí s kapovací jednotkou s tažným kapem s jednotkou na zarovnání a frézování rádiusů Jednotka na zaoblování rohů pro čelní hrany manuální nastavení jednotek Tloušťka hrany: 0,4–5 mm Výška obrobku: 8–60 mm Minimální šířka obrobku: 70 mm Minimální délka obrobku: 140 mm Rychlost posuvu: 11 m/min s rádiusovým stíracím agregátem s plošným stíračem s leštící jednotkou výsuvná podpěra obrobku Hnsdpfxow I H Rke Abxon Odsávací přípojka: 120 + 2 x 80 mm Hmotnost: cca 990 kg D x Š x V: 4550 x 1550 x 1100 mm Dostupnost: krátkodobě Sklad: Flörsheim

Stanje: rabljeno, številka stroja/vozila: 008350, Tip nameščenega roba: tanka obloga, močna obloga, masiven les Sistem lepljenja: PUR Hjdpfjx A Tgysx Abxjnn Spojnično rezkanje: da Multifunkcijska enota: da Maksimalna hitrost podajanja: 20 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št.