Edge banding machine minimax me 35 tr s Holzkraft -Ex-demo machine-

HOLZKRAFT minimax me 35 tr s Holzkraft

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Bsdpfx Afehp Rcrjtoww Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: novo, Leto izdelave: 2026, HOLZ-HER robna lepilka ARTEA 1030 - NOV STROJ Debelina roba (v rolah): 0,4 – 3 mm (odvisno od materiala) Debelina roba (trakovi): 0,4 – 5 mm Debelina obdelovanca: 8 – 50 mm Širina obdelovanca: min. 70 mm Dolžina obdelovanca: min. 180 / 210 mm Podajalna hitrost: 9 m/min Lepljenje z lepilnim valjem, prevlečenim s teflonom, z lepilnim bazenom pod valjem. Obdelava vseh standardnih robnih materialov, vključno z masivnim lesom do 5 mm. Oprema: - Krmiljenje Edge Control BC 15 s 15,6'' zaslonom na dotik - Vi.Se (vizualni nastavitveni način) - LED osvetlitev stroja - Skobljanje robov - Podajalnik robnih trakov - Sistem za nanašanje lepila LR101 – teflonsko prevlečen lepilni valj Bwodpfx Afozhaw Astjw - Pritiskalni sklop - Prečni rezalni agregat - Rezkalni agregat z r=2 mm orodji - Oblikovni rezkalni agregat - Skobeljna postaja - Površinska skobeljna postaja - Polirni agregat 12 mesečna garancija Dobava po dogovoru Dostava, montaža in uvajanje stroja so možni neposredno pri nas za doplačilo. V primeru neskladij med nemško in tujimi različicami je veljavna izključno nemška različica. Naše splošne pogoje poslovanja najdete na naši spletni strani holzher.de/de/agb.

Stanje: dober (rabljeno), Slotting saw blades, window milling tool, indexable inserts, window construction tool Bedob A Np Nopfx Afteww - Slotting saw blades, milling tool for: wooden windows - Dufix: No./Var 46616 - Bore: Ø 50 mm - Weight: 6.8 kg

Leto izdelave: 2025, stanje: novo, Exhibition machine Bedpfx Ajxc Rmqefteww Year of manufacture: 2025 Travel range: 2500x1300x200mm Made of 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame, with adjustable machine feet. Milling bed made of 19mm MDF sacrifice board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile guides incl. profile guide carriages, ball screw, and precision rack. All components assembled, pre-lubricated incl. test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, fully pre-installed in control cabinet, as well as sensors for each axis. Switching relays for automatic activation of the existing extraction system. Brush seals as dust protection and CE-conform safety devices by a traveling extraction unit and a laser scanner mounted on one side for workspace monitoring, with a 275° and 5.5m field range (machine positioned in a room corner). Handheld control unit equipped with all necessary functions for machine operation, incl. emergency stop button and dead man's switch. Tool length sensor for determination of tool length and automatic active offset adjustment. High-frequency spindle, 2.2 kW, incl. locking nut, frequency inverter, line filter, braking resistor, and a collet set. Monitor as built-in display, incl. mini PC with Windows 11, Beamicon2 control software, as well as mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Incl. milling bed designed as a vacuum table, consisting of four individually controlled sections. Cross-table made of PE with a cover plate made of MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. For connecting the vacuum pump to the power supply, a 16 amp, 400 V AC plug is required. The customer must provide 3mm raw HDF on both sides for the entire vacuum table (2500x1300mm) as a sacrificial plate. (Recommended use: machining coated wood-based materials) Incl. 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5 mm Z3 (HF53SRECAR) (Tool selection can be adjusted as required) Incl. maintenance package in a systainer Incl. grease gun 150 ml, one cartridge high-performance grease 400 g, silicone spray grease 500 ml, one grease fitting incl. hose section, and 30mm face mill with indexable inserts. Availability: short-term Location: Flörsheim

Stanje: novo, - New - Description: Bjdpfx Afsvwfmljteww - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Features include graphical display of all machining units and their operating status, graphic simulation of machining processes, control of all machining units, glue pot temperature regulation, setup assistance as per the processing program, error diagnostics for rapid troubleshooting, machining parameter statistics, USB interface, network connectivity ready, and Industry 4.0 readiness with API REST data transfer protocol. - Outstanding accessibility to all working units thanks to the large hood, providing protection and noise reduction. - Monoblock steel construction ensures maximum machine stability and rigidity. - Automatic unit positioning when changing panel thickness. - Automatic feed of strip edges with edge magazine (me 35 t s): Solid wood strip edges are auto-loaded and synchronized with panel feed. - Panel feed via chain conveyor with rubber glide shoes. - Extendable workpiece support table. - Infeed fence adjustment by spacer plates. Technical Data: Dimensions and Weight Length: approx. 3314 mm Height: approx. 1300 mm Width/Depth: approx. 1085 mm Weight: approx. 545 kg Flush/Radial Milling Unit Motor power: 2 x 0.35 kW Spindle speed: 12,000 rpm Cutter diameter (carbide-tipped): 55.3 mm Extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot motor power: 0.25 kW Glue pot extraction port diameter: 60 mm Working temperature: 190°C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edges Edge thickness, rolls: 0.4 – 3.0 mm Edge thickness, strips: up to 5.0 mm Pre-Milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Spindle speed: 7200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235