Rezkanje Tabele nakup rabljenega (2.590)

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Diameter x width: 750 x 1,500 mm Max. operating pressure: 300 bar Cutting force: 60 kN Iaodpfeqnvtzsx Af Tel Weight: approx. 2,800 kg 76 chisels

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: 140379007,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Iodpfoxmhdnex Af Tjal The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, Leto izdelave: 2007, Maximalni prečnik struganja 42 / 140 mm Dužina struganja 170 mm Iajdpjvyli Ejfx Af Tsl Upravljač Mitsubishi Meldas Obrtaji vretena 80–8.000 o/min C-osovina 0,001° Revolverska glava (x-puta) 2x 12 (VDI 20) pogonjena Obrtaji revolverske glave 45–4.500 o/min Snaga vretena 1 kW Abgreif stanica 42 mm Obrtaji 60–6.000 o/min C-osovina 0,001° Broj upravljanih osa 8 Uređaj za stezanje steznih čaura 48 DIN 6343 Radni sati 10.769 h Transporter strugotine da/godina 2018 Ukupna snaga 7,5 / 11 kW Težina mašine cca. 3,3 t Dimenzije cca. 2,4 x 1,6 x 2,2 m CNC strugarsko-glodalica CITIZEN BOLEY BE 42, godina 2007 Simultani rad sa 7 osa na glavnom i prihvatnom vretenu Vrlo dobro stanje, radni sati 21.999 h (septembar 2024) Oprema: # razni nosači alata: 5x aksijalni pogonjeni nosač alata # stezno telo za stezne čaure, tip 173E # dodatni rashladni uređaj # transporter strugotine Knoll, godina proizvodnje 2018 Boley BE 42 se prodaje bez automatskog magazina za šipke. Interfejs za povezivanje postoji. Zamena kompletnog seta baterija izvršena 22.12.2025.

Stanje: pripravljen za uporabo (rabljen), CNC posteljna rezkalna masina Rambaudi Ram Mill 800 Velikost mize: 3700x800 mm Ijdpfx Afoxddp Is Tjal X pomik: 3000 mm Y pomik: 1000 mm Z pomik: 800 mm CNC Selca 3045 4. os premer 400 mm z naslonilom (repno zalogo) popolnoma opremljena z orodji

Stanje: rabljeno, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 4.500 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X AXIS TRAVEL: 6000 MM Y AXIS TRAVEL: 1800 MM Z AXIS TRAVEL: 1000 MM Iasdev H D Exspfx Af Tjl WORKTABLE DIMENSIONS: 7300 X 1090 X H 900 MM SPINDLE NOSE MOUNT: ISO 50 SPINDLE SPEEDS: 0 - 4500 RPM AUTOMATIC INDEXING HEAD: 2.5° X 2.5° CNC CONTROL: SELCA 3045 PD HIGH-PRESSURE INTERNAL AND EXTERNAL COOLING TOOL CHANGER WITH 60 POSITIONS NO. 01 CNC-CONTROLLED DIVIDING HEAD

Stanje: zelo dobro (rabljeno),

Stanje: skoraj kot novo (rabljeno), Edge milling machine for deburring/chamfering various internal and external contours. Chamfer size adjustable up to max. 10 mm at 45°. Iaodpfxjtwcn Re Af Tjl 45° cutter / 8 cutting edges, double row – KIF/MF. Suitable for steel, light metals, stainless steel, cast iron, and non-ferrous metals. Includes 21 packs of 10 indexable inserts X11.30.35.45 P25 BS TiCN each Includes 7 packs of 10 clamping screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, plus VAT.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, FIVE STAR THM-460 Horizontal Double-Head Milling Machine with Indexing Axis Ideal machine for machining and chamfering P-plates for toolmaking from 4 sides in a single clamping. Technical Basic Equipment: Control - FANUC 0i-MF - User-friendly touchscreen, 10.4" color display - Dialogue-assisted data entry Machining Capacities - Workpiece length min./max.: 20 – 460 mm - Workpiece width min./max.: 20 – 460 mm - Workpiece height min./max.: 12 – 150 mm (opt. 180 mm) - Max. workpiece corner chamfer: 10 mm Travel Paths - X-axis (machine table): 620 mm - Y/Z-axis (feed axis/spindle box): 330 mm / 330 mm Iedpfxovi I Nme Af Tsal Axis Drive Power - X-axis motor: 2.5 kW - Y-/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (feed axis): 10 m/min - Rapid traverse Z (spindle box): 10 m/min - Manual feed: 0 – 1,500 mm/min - Automatic feed: 0 – 5,000 mm/min Main Spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: each 100 – 1,000 rpm - Drive power: each 11 kW - Spindle interface: each 2" / Ø50.8 mm - Oil-cooled with separate spindle oil cooler (optional) Tools (Standard) - Milling cutter head: Ø160 mm (opt. Ø200 mm); Note: Tools are not included in standard delivery! Rotary Axis (B-axis) - Indexing: (standard 5° increments) - Indexing angles: 0°, 45°, 90°, 135°, and 180° (for 2-side machining) - Table size: Ø320 mm - Max. load: 320 kg Workpiece Alignment - 90° stop for easy loading by the operator - Automatic measuring unit for workpiece position detection Guides - X-axis: Linear roller guide - Y-axis: Flat guide with TURCITE-B coating - Z-axis: Flat guide with TURCITE-B coating - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Other Features - Central lubrication oil/air - Control cabinet with heat exchanger - Partial sheet metal enclosure - Support worktable - Toolbox - LED work light - 3-color signal beacon - CE declaration of conformity in accordance with European directives Dimensions and Weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-up spindle motor 15 kW - Spindle interface each 1-7/8", suitable for face milling cutter Ø200 mm Arbor diameter: Ø47.625 mm Tools - Face milling cutter Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary Axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angles: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. load: 320 kg Pneumatics, Coolant, and Chip Management - Chip compressed air nozzle, 1 pc. each, external to the spindles, standard option (metal articulated compressed air tube) - Coolant system with separate coolant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters, filtration capacity: 80 l/min - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Stanje: dober (rabljeno), The machine is in good technical condition. Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 10,500 kg Total table area: 1,000 x 5,000 mm Number of T-slots: 7 / 140 mm Width of central slot: 22H7 Longitudinal X-axis travel: 5,000 mm Transversal Y-axis travel: 1,000 mm Vertical Z-axis travel: 1,400 mm Minimum distance from horizontal spindle axis to clamping surface: 150 mm Minimum distance from vertical spindle nose to clamping surface: 125 mm Spindle taper: ISO 50 Spindle diameter at front bearing: 100 mm Tool taper: ČSN 22 0434 (DIN 69 871 - A 50) Drawbar force of clamping mechanism: 16,100 N Horizontal spindle rotation (bi-directional): +177.5° ÷ -180° Vertical spindle rotation (bi-directional): +177.5° ÷ -180° Usable main drive motor power: 22 kW Iajdsx Ai Igjpfx Af Tel Spindle speed range: 11 ÷ 2,500 rpm Number of speed steps: stepless Feed rate range: 1 ÷ 5,000 mm/min Rapid traverse in Y and Z axes: 10 m/min Rapid traverse in X axis: 15 m/min Maximum approach feed rate to reference point: 3,000 mm/min Spindle head rotation around transverse machine axis: +177.5°, ±180° The machine has undergone partial overhaul.

Stanje: rabljeno, STRUŽNIŠKI CENTER "MORI SEIKI" MOD. ZL 200SMC Isdpfxsxwxwte Af Tjal CNC MSC-501 Dolžina struženja: 452 mm Največji premer struženja: 388 mm Največji premer nad posteljo: 510 mm Razdalja med konicama: 751 mm Vpenjanje vretena: A2-6 Hitrost vretena: 4.000 vrt/min Moč glavnega motorja: 11 kW Število orodij: 12

Stanje: dober (rabljeno), Leto izdelave: 2009, Stroj za žlebljenje parketa ZEFIRO – avtomatsko izdelovanje žlebov na vezani strani parketnih desk. Uporabna dolžina 2400 mm. Vključen vstopni tračni transporter. Iajdox Rrqvjpfx Af Tel

Stanje: novo, Aluminum sliding table with hardened steel guide bars. Parallel fence with micrometric fine adjustment. Milling spindle and saw blade tiltable and fully retractable. 100% Made in EU (designed, built, quality-tested) Technical Data Circular Saw: Max. saw blade diameter: 315 mm Spindle diameter: 30 mm Sliding table length: 2300 mm Max. cutting width at parallel fence: 1100 mm Max. cutting height, 90°/45°: 103 mm/72 mm Motor output: 3.8 kW S6 (3 kW S1) Extraction port diameter: 120 mm Spindle Moulder: Spindle diameter: 30 mm Tilting spindle: 90°/45° Spindle height adjustment: 175 mm Spindle speeds: 10000/8000/6000/ 5000/4000/3000 Motor output: 3.8 kW S6 (3 kW S1) Weight: 790 kg Optional Accessories: Longer sliding table Motor output 5 kW (4 kW S1) Integral fence for spindle operation Iaedsvrvdkepfx Af Tel Mitre index on extension table Scoring saw, interchangeable spindle for router cutter

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Iodpfx Aot Hkq Rof Tsal

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Angular milling head - Manufacturer: Waldrich Siegen - Model: ET500 Iasdpferfw R Hjx Af Tjl - Reference No.: 11290/731

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, Stroj je v dobrem tehničnem stanju, možnost preizkusa po predhodnem dogovoru. Iodpfexyvz Iex Af Tjal

Stanje: rabljeno, Leto izdelave: 2007, Mecof Air One triosni visoko hitrostni rezkalni center z vrtljivo glavo. Serijska št. 40719 (2007) s CNC krmiljem Fidia C10, hodi X/Y/Z = 1650/2300/1000 mm, velikost mize 2500 x 1750 mm, avtomatski menjalnik orodij za 40 orodij (ATC), največja hitrost vretena 30.000 min⁻¹, konus vretena HSK 63E, 40-pozicijski ATC, maksimalni pomik 60.000 mm/min, moč vretena 22 kW, nastavitev orodja Blum. CE oznaka. Avtomatsko se bo vaši fakturi dodal strošek v višini 11.500 € za demontažo in nakladanje na ustrezen transport, če boste uspešno kupili ta predmet. Če želite organizirati lastno demontažo in nakladanje na lastne stroške, prosimo, obvestite Cottrill & Co. Iaedpfx Ajx Tqqgof Tjl

Stanje: rabljeno, Leto izdelave: 1987, Premer kolesa - maks. 150 mm Modul - maks. 5 Modul - min. 0,5 Teža stroja cca 10.000 kg Prostorske zahteve cca 6500 × 2700× 3600 mm Isdpsx U A Umsfx Af Tjal

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, For sale: Mazak QuickTurn 20N CNC lathe. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Iaodpju U R E Aefx Af Tel

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC-vzdolžni stružni stroj Doosan Puma St20G Leto izdelave 2012 Revija za palice FMB turbo 3-26 Iasdpfx Afjwtg Dio Tjl Transporter za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 540 mm, pomik osi Y: 240 mm, največja hitrost vretena: 1.650 obr/min, hitrost vretena (min.): 45 obr/min, nosilec vretena: MK 4, globina grla: 350 mm, poteza s peresom: 130 mm, skupna dolžina: 1.250 mm, skupna višina: 1.900 mm, širina mize: 225 mm, skupna širina: 1.100 mm, dolžina mize: 800 mm, zmogljivost vrtanja: 40 mm, nos vretena: MK-4, nazivna moč: 2,2 kW (2,99 KM), Drilling/milling machine, drilling capacity Ø 40 mm, 2-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm, stepless variator, MK-4, machine lamp, motorized table lift, automatic feed, fine adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg. Isdpfowt Swzsx Af Toal

Stanje: dober (rabljeno), Leto izdelave: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 Travel X-axis mm: 260 Travel Z-axis mm: 795 Travel Y-axis mm: 100 Swing diameter over bed mm: ø: 920 Swing diameter over cross slide mm: 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/15 Isdpfxsv Egqze Af Tsal Spindle bore mm: 91 Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Tailstock Tailstock travel mm: 734 Quill taper: MT3 Equipment Chip conveyor Signal lamp High-pressure pump Foot switch for chuck or collet chuck system Interface for bar feeder Base machine: Dimensions/Weight Length mm: 2,620 Width mm: 1,898 Height mm: 2,200 Weight kg: 6,140

Stanje: zelo dobro (rabljeno), Profesionalni komplet rezkalnih in vrtalnih držal na stožcu SK40 / ISO40 po standardu DIN 69871 A. V kompletu je približno 25 kosov orodij pripravljenih za delo z nameščenimi rezkarji in svedri. Obseg premerov orodij: od Ø4 mm do Ø12 mm – idealen komplet za serijsko proizvodnjo. Dolžina držal: 50 mm – kompaktna in natančna, idealna za CNC obdelovalne centre. Komplet vključuje različne tipe orodij: valjasto-čelne rezkarje, navojne orodje, povrtala, VHM svedre, posnemalce robov. Del orodij je prevlečen – za obdelavo jekla, nerjavečega jekla, aluminija in litega železa. Vsa držala v rabljenem, tehnično dobrem stanju – preverjena, pripravljena za takojšnje delo. Izdelki priznanih znamk: ZÜRN Germany in Orion. Možen nakup celotnega kompleta ali posameznih kosov. Ijdpfx Ajxldr Ejf Tjal

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 2.340 obr/min, hitrost vretena (min.): 32 obr/min, nosilec vretena: MK 4, globina grla: 293 mm, premer tulec: 72 mm, poteza s peresom: 145 mm, skupna dolžina: 1.340 mm, skupna višina: 2.050 mm, širina mize: 225 mm, skupna širina: 1.280 mm, dolžina mize: 800 mm, zmogljivost vrtanja: 50 mm, nazivna moč: 2,2 kW (2,99 KM), Drilling/milling machine with digital readout on 3 axes, drilling capacity Ø 50 mm, motor 2.2/3.0 kW, table size 800x225 mm, spindle speed 32-2340 rpm infinitely variable, MK-4, electric thread cutting device, machine lamp, coolant system, dimensions 1340x1280x2050 mm, weight approx. 780 kg. Iajdpfx Aown E Sbjf Tel

Stanje: zelo dobro (rabljeno), Profesionalna rezkalna glava s pritrditvijo SK40, namenjena ploščinski in grobi obdelavi jekla ter litega železa. Model: AHSC 100-05-11. Delovni premer: Ø100 mm. Največje število vrtljajev: 22.500 rpm. Število ležišč za ploščice: 4. Pritrditev: SK40. Stanje: rabljena, tehnično brezhibna – vidne sledi uporabe. Idealna za CNC obdelovalne centre in konvencionalne rezkalne stroje; zagotavlja visoko zmogljivost in stabilnost tudi pri visokih rezalnih hitrostih. Ijdpfx Afexk T Rns Tsal