Rezkanje Kovin nakup rabljenega (33.909)

Stanje: rabljeno, Leto izdelave: 1989, Wheel Diameter - max. 400 mm Wheel Width 275 mm Module - max. 6 Machine Dimensions 300x310x245 cm Machine Weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Min module: 1 - Max module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter brace: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. gear helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed, infinitely adjustable: 0.2-10 mm/rev - Tangential feed, infinitely adjustable: 0.1-5 mm/rev - Radial feed for spur gears: 0.1-4 mm/rev - Radial feed for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial rapid traverse for spur gears: 400 mm/rev - Radial rapid traverse for worm gears: 100 mm/rev - Motor power: 7.4 kW Weight - Machine 5,000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dkjdpfxsu A I Elj Aplsl Dimensions - Length with chain drive (standard) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Machine height: 1980 mm Electrical cabinet approx.: 2400 mm Machine with DC drive approx.: 2150 mm

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools - Only approx. 8,093 spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial) Dedpfx Ajy E Tvvepljkl

Stanje: potreben popravila (rabljeno), Leto izdelave: 2010, Funkcionalnost: nefunkcionalno, hitrost pomika os X: 120 m/min, vhodna frekvenca: 50 Hz, For sale is a mechanization system from Weinig, consisting of: Dkjdpfx Apsv Skayolol Weinig 811, Weinig 820, Weinig 814, Weinig 811, Weinig 806.

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, delovna širina: 250 mm, višina skobljanja: 160 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, delovna višina: 160 mm, skupna masa: 10.000 kg, moč pogonskega motorja podajalnika: 30.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: mehanski, premer gredi skobeljnika: 50 mm, vrsta vhodnega toka: trifazni, dolžina mize: 1.000 mm, število vreten: 9, vhodna frekvenca: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 65 m/min, Spindle configuration: 1-Bottom (11 kW) - with hydraulic clamping 2-Right (7.5 kW) Djdpfx Apsqvml Rjlskl 3-Left (11 kW) 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-Bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Stanje: rabljeno, Leto izdelave: 2003, max. spindle speed: 5,000 rpm X-axis travel: 160 mm Z-axis travel: 450 mm Number of turret stations: 12 Tool holder: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4.5 x 2.5 x 2.5 m Machine weight: 3,700 kg Technical Specifications: Main spindle: - Max. speed range: 6,000 rpm - Drive power: 16 kW - Max. torque: 155 Nm - Spindle nose: 140H5 Travel: - X-axis: 160 mm - Z-axis: 450 mm Rapid traverses: - X-axis rapid traverse: 60 m/min - Z-axis rapid traverse: 45 m/min - C-axis rapid traverse: 200 rpm Djdpfxsv Ehawj Aplekl Feed force: - X-axis feed force: 2.5 kN - Z-axis feed force: 4.0 kN Turret: - Max. tool stations: 12 positions - Driven tool stations: 12 positions - Max. driven tool speed: 5,000 rpm - Driven tool power: 10 kW - Tool holder: VDI 30 - Tool shank: 20 x 20 mm - Control: Heidenhain iT Plus - Hollow chuck cylinder: VNK 130/52 - Including C-axis and live tooling - Chip conveyor - Oil and coolant mist extractor with electrostatic filter

Stanje: dober (rabljeno), Maximum wheel diameter: 630 mm Wheel width: 375 mm Maximum module: 10 Clamping table: 550 mm Table bore: 125 mm Cutter speed, infinitely variable: 62 - 390 rpm Spindle taper: Morse 5 Axial feed: 0.40 - 6.80 mm/rev Radial feed: 0.10 - 1.76 mm/rev Distance between milling spindle and clamping spindle: 50 - 425 mm Minimum number of teeth: 8 Cutter diameter x width: 192 / 215 mm Cutter stroke: 200 mm Main drive motor: 7.5 kW Dedpfjua It Ujx Apljkl Total power requirement: 21 kVA Machine weight approx.: 8.2 t Machine equipment: - Universal milling head with tangential adjustment - Pressure reducing valve for counterholder - Magnetic chip conveyor - Year of manufacture: approx. 1976

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, For sale: Mazak QuickTurn 20N CNC lathe. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Dkjdpfju U R E Ajx Apljl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic feed unit for Weinig Hydromat. Feed speed: 8–60 m/min. Dedpev Er Ufefx Aplskl

Stanje: zelo dobro (rabljeno), Profiling rod milling machine for handles Sibo Taus 2 1/2 Djdpfsv Tv Urex Aplekl Working diameter: 18-63 mm Main motor power: 5.5 kW Minimum workpiece length: 470 mm Feed speed steplessly adjustable via variator Capable of producing items such as: billiard cues, broom handles, shovel handles, rake handles, and chair legs

Leto izdelave: 2000, stanje: rabljeno, Adjustment of milling fence: via handwheel Milling fence position display: Siko counter Dodpfx Apoy A Hi Rjlskl Adjustment of milling jaws: handwheel Milling jaw position display: Siko counter

Stanje: rabljeno, Leto izdelave: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Dodpewzypnjfx Apljkl Flexible and Universal Gear Hobbing for Large Gears Large gear hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears serving various industries: wind turbines, industrial gearboxes, mining and marine applications, gear manufacturing, and more. The guideways are wide and fitted with hydraulically preloaded guides, used in combination with separate linear guidance systems and backlash-free rollers. This ensures precise slide movements during every feed operation. The work table’s design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, combined with the proven backlash-free double worm gear drive, guarantees precise table movements and highest flatness as well as concentricity accuracies—regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized hob heads for external and internal gears are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hob heads. The drive’s power range anticipates future tool developments. Naturally, the hob head drive is backlash-free as well. These machines are particularly suited for the use of state-of-the-art cutting materials, whether dry or wet machining is preferred.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, The perfect retrofit machine! Mechanically in exceptional condition! This machine can be inspected under power until 12.05.2026. After this date, it will be dismantled due to space constraints. Please find attached the current KLINGELNBERG measurement protocols available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Dodpfsy Hfm Nex Aplekl Condition: Mechanically in very good condition Functionality: Fully operational Inspection: Possible under power Technical specifications: - Rated workpiece diameter: 800 mm - Max. workpiece diameter: 800 mm - Max. workpiece diameter, special version: 1,200 mm - Rated module: 20 / 30 mm - Rated module, special version: 25 / 35 mm - Drive power: 35 kW - Drive power, special version: 52 kW - Cutter head speed range: 20 - 200 rpm - Cutter head speed range, special version: 26 - 265 rpm - Additional cutter head speed range, special version: 36 - 360 rpm - Swivel range of cutter head: +30 / -45 degrees - Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm - Center distance workpiece/tool, min./max.: 50 / 600 mm - Center distance workpiece/tool, special version: 50 / 800 mm - Max. axial slide travel: 700 mm - Max. axial slide travel, special version: 1,000 mm - Max. axial slide travel, special version: 1,300 mm - Lowest cutter head position above table: 450 mm - Table diameter: 800 mm - Table bore diameter: 245 mm - Table bore depth: 875 mm - Max. table speed: 15 rpm - Max. table load: 10,000 kg Machine dimensions: - Width A: 5,800 mm - Length B: 6,900 mm - Height C: 4,700 mm - Machine weight: 22,000 kg Regarding the values of the current KLINGELNBERG gear measurement reports before the grinding process: "Pitch and lead are unremarkable. In the profile, one measurement shows an fHα deviation at the limit or slightly outside the tolerance. Please check whether this value is permissible according to the drawing/customer approval or if correction or reworking is required. The gears have always been passed on to the RZ 1000 REISHAUER for grinding and were ground accordingly. Nevertheless, an overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Stanje: novo, Leto izdelave: 2026, x-hod 560 mm y-hod 320 mm z-hod 400 mm horizontalna miza 950x450 mm vertikalna miza 1050x320 mm vrtljaji vretena 25-3600 min⁻¹ vreteno SK 40 - Nova stroj - - horizontalna velikost mize 950x450 mm - - vertikalna velikost mize 1050x320 mm - - vrtljaji vretena 25-3600 min⁻¹ - s 3-osnim digitalnim prikazom FAGOR INNOVA 30i-M, neprekinjeno nastavljivimi posmičnimi hitrostmi, mehanskim varnostnim ročaji, trojnim nastavljivim zaščitnim ščitnikom, RITTAL nosilni sistem in RITTAL upravljalna plošča nad strojem za obojestransko delo. * Za več informacij o točni serijski opremi Dkedsy Nnznjpfx Aplol in razpoložljivih možnostih obiščite našo spletno stran ali nas kontaktirajte neposredno *

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stružno-rezkalni center s protivretencem z 10 CNC osmi (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Krmilnik: FANUC 31:iA Glavno vreteno Moč vretena: 15/11 kW Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Protivreteno Moč vretena: 11/7,5 kW Dksdpey N Sw Tjfx Aplol Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Stružno-rezkalno vreteno Moč: 7,5/3,7 kW Vrtljaji: 12.000 min⁻¹ Maks. dolžina struženja spodnje revolverske glave: 1.005 mm Hodi suportov X1/X2/Z1/Z2/B2: 455 / 222,5 / 1.090 / 1.005 / 1.008 mm Hodi suportov Y1/Y2: ±70 / ±50 mm Zasuk osi B1: ±95 ° Linearni regalni magazin z vključenim podporno-robotom CNC podajalna luneta Hladilni ciklonski filtrirni sistem z 2 črpalkama hladilne tekočine Olajni hladilnik vretena

Stanje: dober (rabljeno), Sine Table Type: cross-tilting, suitable for milling Manufacturer: Stanko Model: 370P 22 Serial No.: 3177 Dsdpjwv Dfpsfx Aplskl Size: 500 x 200 mm Base area: 500 x 200 mm Number of T-slots: 3 T-slot width: 11 / 20 mm T-slot depth: 6 / 16 mm Height: 100 mm Features: cross-tiltable Dimensions: 500 x 200 x 100 mm Weight: 31 kg

Stanje: rabljeno, Number of milling spindles: 4 pcs. Djdpfxoy Dvm Is Aplokl Stop: yes / yes / no Tooling: yes Stegherr KSF 2/4 – The modern, practical machine concept for efficient transom production. Years of expertise and a proven, field-tested machine (with over 1,000 units in operation) guarantee you precision at an optimal price-performance ratio. Special emphasis is placed on easy operation and flexibility of the machine. Expansion stage KSF 2/4: Milling units A1, A2, A3 as with the KSF 2, plus milling unit A4. This allows machining of the counterpart without turning, ensuring a tear-free visible surface. Digital stop (sliding carriage, secure and quick readability to 1/10 mm). Foot switch Supplied with tooling as shown in the pictures, plus 2 additional profile cutters (see pictures). Further accessories as shown in the pictures. Compressed air p = 6 bar The following works have been carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexiglas hood replaced and gas strut for hood open/close replaced - Functional test completed (Technical data provided by manufacturer – subject to verification!)

Stanje: dober (rabljeno), Premer kolesa – maks. 600 mm Modul – maks. 6 Dimenzije D-Š-V 2540 x 1500 x 1920 mm Premer mize 160 mm Teža stroja pribl. 3,6 t Visoko zmogljiv stroj za radialno valjčno rezkanje zobnikov Zobni kot 15° Širina zoba 270 mm Premer kolesa 620 mm Zobni kot 30° Širina zoba 250 mm Premer kolesa 610 mm Zobni kot 45° Širina zoba 200 mm Premer kolesa 500 mm Zobni kot 60° Širina zoba 100 mm Premer kolesa 450 mm Največji premer rezkarja 105 mm Največja širina rezkarja 115 mm Premer vpenjalne mize 420 mm Vrtina vpenjalne mize 75 mm Globina vrtine pod površino mize — mm Dodpfxsy E Twge Aplokl Premer zobniškega segmenta 450 mm Vpenjalni drog 30 mm Rezkalni drogovi 22–27–32 mm

Stanje: dober (rabljeno), Leto izdelave: 1974, Ponudba 26003 Tehnični podatki: - Premer žaginega lista: do 370 mm Dkedjy Nlnxspfx Aplel - Območje reza pri 90°: - okroglo: 110 mm - kvadratno: 100 mm - pravokotno: 280 x 40 mm ali 240 x 85 mm - Pri 45°: - okroglo: 110 mm - kvadratno: 100 mm - pravokotno: 220 x 40 mm - Nastavljiv kot mitre levo in desno: vsak 0 – 90° - 2 hitrosti rezanja: 13 + 26 m/min - Pogon: 380 V / 1,2 / 1,8 kW - Hitrost pomika žaginega lista hidravlično brezstopenjsko nastavljiva - Hladilna naprava - Potrebni prostor: cca Š 800 x V 1850 x G 1100 mm - Teža: cca 750 kg

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC univerzalna posteljna rezkalna stroj Anayak. Pomiki X/Y/Z: 2000mm/1300mm/1460mm, dimenzije mize X/Y: 1350mm/1550mm, maks. obremenitev mize: 6000kg, vrtljaji: 3000 vrt/min, vpenjalo vretena: ISO50, pomik: 3m/min, hitri pomik: 10m/min, teža: ca. 24.000kg, krmiljenje: Heidenhain TNC426CB. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dkedpfx Aoy N Ddfjplol

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC univerzalni ležiščni rezkalni stroj Anayak. Pomiki X/Y/Z: 2500mm/900mm/975mm, dimenzije mize X/Y: 2900mm/800mm, vpenjalno mesto vretena: ISO50, hitrost vretena: 3000 obr/min, moč: 22kW, pomik: 6m/min, hitri pomik: 10m/min, število mest za orodja: 30. Dimenzije stroja X/Y/Z: pribl. 6000mm/3000mm/3000mm, teža: pribl. 20000kg, krmilje: Heidenhain TNC 426. Dokumentacija je na voljo. Možen je ogled na lokaciji. Predvidoma na voljo od septembra 2026. Dsdey N Dc Uopfx Aplskl

Stanje: novo, Leto izdelave: 2026, x-hod 420 mm y-hod 220 mm z-hod 380 mm horizontalna miza 840x390 mm vertikalna miza 950x250 mm število vrtljajev vretena 65-2600 obr/min vpenjanje DIN 2080 ISO 40 - Nova strojna oprema - - horizontalna velikost mize 840x390 mm - - vertikalna velikost mize 950x250 mm - - število vrtljajev vretena 65-2600 obr/min - s 3-osnim digitalnim prikazovalnikom FAGOR INNOVA 30i, avtomatskimi podajalniki mize, lamelnimi pokrovi, 1 horizontalni rezkalni trn, popolno pokritje mize s 3-delno zložljivo zaščito in pnevmatsko vpenjanje orodja DIN 2080 * Za več informacij o točni serijski opremi in razpoložljivih opcijah obiščite našo spletno stran Dkjdoy I Db Iepfx Aplel ali nas pokličite *

Stanje: novo, Leto izdelave: 2026, X-hod 420 mm Y-hod 220 mm Z-hod 380 mm Horizontalna miza 840x390 mm Vertikalna miza 950x250 mm Vretenaste hitrosti 65-2600 o/min Vpenjalni sistem DIN 2080 ISO 40 - Nova stroj - - Velikost horizontalne mize 840x390 mm - - Velikost vertikalne mize 950x250 mm - - Vretenaste hitrosti 65-2600 o/min - s 3-osnim digitalnim prikazom FAGOR INNOVA 30i, avtomatskimi podajami mize, lamelnimi pokrovi in 1 horizontalno rezkalno osjo Dkjdpfsy I Dbzex Aplsl * Za več informacij o natančni serijski opremi in dodatnih možnostih nas obiščite na spletu ali nas pokličite *

Stanje: novo, Leto izdelave: 2026, X-pomik 420 mm Y-pomik 220 mm Z-pomik 380 mm Horizontalna miza 840x390 mm Verticalna miza 950x250 mm Vretenaste hitrosti 65-2600 obr/min Orodni priklop DIN 2080 ISO 40 - Nova stroj - - Velikost horizontalne mize 840x390 mm - - Velikost vertikalne mize 950x250 mm - Dsdpfx Ajy I Dbujpljkl - Vretenasta hitrost 65-2600 obr/min - s 3-osnim digitalnim prikazom FAGOR INNOVA 400i, avtomatskimi pomiki mize, lamelnimi pokrovi, 1 horizontalni rezkalni trn in popolna zaščita mize s trojno preklopnim pokrovom * Za več informacij o natančni serijski opremi in razpoložljivih možnostih nas obiščite na spletu ali nas neposredno kontaktirajte *

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Max. wheel diameter: 900 mm Max. module: 10 Approx. machine weight: 8,200 kg Max. hob diameter: 190 mm Max. hob length: 320 mm Infinitely variable hob speeds: 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm LIEBHERR Gear Hobbing Machine L 900 Dodpfx Apsvkpu Hsljkl Counter-support arbor missing

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Turning diameter: 120 mm Turning length: 100 mm Control: Fanuc Main spindle 1 power: 7.5 kW Main spindle 1 speed: 4,500 rpm Main spindle 2 power: 7.5 kW Main spindle 2 speed: 4,500 rpm Distance between spindle noses: 600 mm Turret no. 1 stations / driven: 15/15 Driven tool power, turret 1: 2.7 kW Driven tool speed, turret 1: 4,000 rpm Turret no. 2 stations / driven: 15/15 Driven tool power, turret 2: 2.7 kW Driven tool speed, turret 2: 4,000 rpm Travel paths X/Z, turret 1: 250 / 300 mm Travel paths X/Z, turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm Power chuck: 165 mm Spindle bore spindle 1: 62 mm Spindle bore spindle 2: 62 mm Space requirement approx.: 3700 x 2300 x 3000 mm Dodpfoy D Nxdex Apljkl Machine weight approx.: 5,600 kg Used CNC opposing spindle turning center with gantry loader - 165 mm chuck on both spindles - 2x 15-position turret with driven tools - Automatic workpiece loader with turning station 14-position magazine on the left Maximum part size: Ø 120 x 100 mm Double gripper capacity: 2 x 3 kg