Puhalnik Za Seno nakup rabljenega (85.330)

Stanje: dober (rabljeno), High-pressure radial fan, dust extraction blower, exhaust extraction, heating blower, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower - Exhaust air blower - Electric motor: Lammers 400/690 V / 3 kW - Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 - Speed: 3,179 rpm Ncedsff Aq Ajpfx Abbel - Airflow rate: 2,160 m³/h - Inlet connection: Ø 735 mm - Outlet connection: 365 x 310 mm - Dimensions: 1,300 x 740 x H820 mm - Weight: 153 kg

Stanje: rabljeno, Output: 2,000–5,000 bottles/hour Power: 9 kW (3 blowers, each 3 kW), 440 V, 3-phase, 50 Hz Dimensions: 2,250 x 950 x 1,700 mm (H) Ncjdpfxoxytzro Abbol Weight: 350 kg

Stanje: novo, Leto izdelave: 2025, Hopper capacity: 40 kg Capacity: Up to 140 onions/min Raw material size: 45 – 140 mm Overall machine width: 1050 mm Overall machine height: 1880 mm Overall machine length: 4830 mm Number of working lanes: 2 Onion loading height: 1000 mm Onion discharge height: 700 mm Waste discharge height: 400 mm Power supply: 3 x 400 V / 50 Hz Installed power: 1.2 kW Njdpfx Ajd Nimaobbocl Compressed air connection: 8-10 bar Air consumption: 1.9 m³/min Noise level: Above 80 dB Frame material: Acid-resistant stainless steel and plastics approved for food contact CE Certificate: Yes Topper: No

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: Ncodpfx Ajwyda Uobbsl • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Machine XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spray System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. The device is designed to simulate sunlight, weather, and climate influences, and is used worldwide in research, quality control, and material testing. Special features: - Professional device for UV and weather resistance testing - Ideal for laboratories, industry, and quality assurance - Fully functional, incl. comprehensive technical documentation Technical data & features: - Weathering and lightfastness tester with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) to adjust spectral distribution - Humidification and spray system (ultrasonic humidifier, spray bars) - Measurement system with XENOSENSIV sensor for irradiance and black standard temperature monitoring - Integrated touch display for control and programming - Pre-programmed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely definable test programs - Documentation possible via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) Nedpfx Aow Thyksbbjcl (Subject to changes and errors in technical specifications; information is non-binding!) If you have further questions, we are happy to answer them by phone.

Stanje: dober (rabljeno), Included in delivery: 02x Rack uprights, used Material colour: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Beam levels (cross beams), used Material colour: orange Box section: 120 x 50 mm Clear span: 2,700 mm 08x Safety pins, used Design: fully galvanized 03x Wire mesh shelves, new Material colour: Sendzimir galvanized Design: laid-on shelf grids, folded on both sides Depth (direction of bearing bars): approx. 1,125 mm For upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Support edge for beams: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire gauge: approx. 4.5 mm Maximum load capacity: up to 800 kg (evenly distributed load) 03x Trapezoidal sheets, grade II Outside colour: RAL 8012 red-brown Inside colour: similar to off-white Sheet length: 1,500 mm Sheet width: 1,075 mm Effective cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material colour: RAL 8012 red-brown Dimensions: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm With 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws 4.8 x 20 mm Galvanized, self-tapping For timber substructure Technical data for firewood shelter: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images provided are sample pictures for illustrative purposes of the construction. The material colour of the uprights and beams shown may differ. Ncedpsdvgxisfx Abbjl General information regarding this item: This item is offered for pickup only. If transport or shipping is required, additional costs will apply. These can be requested from us, and will be quoted separately depending on delivery location and scope.

Stanje: rabljeno, Filter za odsesavanje ostružkov z avtomatskim čiščenjem filtrov (povratno izpiranje z ventilatorji in krmilno omarico Macair), z 1 vrečo. Njdpfxstxdpxs Abbscl

Stanje: nepreverjeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wooden crate containing nuts, bolts, screws, and other fasteners. Ncjdpfx Abjw Hrw Iobol 820 kg (weight excluding wooden crate) Lot includes the wooden crate.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 250 kg, Oprema: žerjav, GEDA Lift 250 Comfort se proizvaja že desetletja in je med krovci ter gradbeniki zelo priljubljen zaradi svoje zanesljivosti, saj omogoča hiter in enostaven transport tovora na želeno delovno višino. Nedpfsxvyagsx Abbjcl

Stanje: dober (rabljeno), The machine was used for washing fruit and olives and is in good condition. Ncedjvtf T Djpfx Abbjl

Stanje: dober (rabljeno), Leto izdelave: 1996, Used capper, previously part of a bottling line for carbonated drinks and water. Fully functional and in good condition. Nodpfx Asvtpt Isbbocl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Nedpfxsv T Rlls Abbscl

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, The machine can fill still beverages such as water, juice, and wine, and it is also capable of filling carbonated drinks. The machine is isobaric. Ncjdpfx Ajvtgaxobbol

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: PB12093N2025005, premer gredi: 155 mm, lastna masa: 450 kg, Oprema: dokumentacija / priročnik, Neuporabljeni profilni upogibni stroj, letnik 2025! TEHNIČNI PODATKI Premer osi: 50 mm Premer valja: 155 mm Zmogljivost okroglega premera: 50 mm Obrati osi: 11 obr/min Število valjev: 3 kos PODROBNOSTI STROJA Upravljanje: konvencionalno Moč: 1,5 kW Dimenzije & Teža Ncedpfx Abox Tp N Uebel Mere (D x Š x V): 1.200 x 800 x 1.800 mm Lastna teža: 450 kg Transportni paketi: 1 kos Delovne ure: 0 OPREMA Dokumentacija CE oznaka CE certifikat

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB10011N2025006, širina mize: 550 mm, dolžina mize: 300 mm, hod: 180 mm, stiskalna sila: 28 t, lastna masa: 800 kg, Neuporabljeni stroj za upogibanje trakov, letnik 2025! TEHNIČNI PODATKI Moč: 28 t Maks. hod: 180 mm Širina mize: 550 mm Dolžina mize: 300 mm PODROBNOSTI STROJA Moč motorja: 4,0 kW Dimenzije in teža Dimenzije (D x Š x V): 1.300 x 800 x 1.400 mm Lastna teža: 800 kg Transportni paketi: 1 kos Obratovalne ure: 0 OPREMA Dokumentacija CE oznaka CE certifikat Ncodpfx Ajx Tp E Aebbol

Leto izdelave: 2009, obratovalne ure: 5.387 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Ncedpfxsx U Thko Abbel On-time: 20,616 h Spindle hours: 5,387 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Ncsdpox Tqgbsfx Abbol Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX26200913, stružna dolžina: 1.530 mm, premer struženja: 670 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 675 mm, pomik osi Y: 300 mm, pomik po osi Z: 40 mm, največja hitrost vrtenja: 4.000 obr/min, število mest v zalogovniku orodij: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with a shortest installation length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining envelope: Ø 670 mm x 1,530 mm Control system Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with safety cover for main and counter spindle Travel control: Automatic stroke control of the clamping cylinder for main and counter spindle Turn-mill Spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-on tool holders Milling performance: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring & Monitoring Tool presetting: Manual tool presetter for main and counter spindle, removable (standard) Position measuring system: Direct measurement system in the X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multi) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant & Chip Disposal Chip conveyor: Right discharge, hinge-type belt + drum filter Coolant: Use of water-soluble coolant (emulsion) Nsdpoyap Shofx Abbecl Pressure: High-pressure coolant system, 70 bar Coolant supply: Through the spindle for tool spindle and lower turret Filtration unit: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter & Cooling System Filtration unit: INTERLIT TMF300/980 compact filtration unit, 70 bar Additional pressure: 15 bar for turret II with lift pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 89N1160, največja širina rezanja: 800 mm, globina vstavljanja: 800 mm, skupna masa: 900 kg, hitrost vzvratne vožnje: 70 mm/s, TEHNIČNE PODROBNOSTI Širina reza: 800 mm Globina podajanja: 800 mm Največja višina obdelovanca: 100 mm Tlak stiskanja: 180–2.700 daN Ostanki reza brez zaščitne plošče: 15 mm Ostanki reza z zaščitno ploščo: 50 mm Povratna hitrost: 70 mm/s PODROBNOSTI STROJA Nsdpfx Ajycr Iksbbscl Priključna moč: 4,0 kVA Napajanje: 400 V, 50 Hz, 2,6 A Upravljanje: 18,5" zaslon na dotik Programski pomnilnik: 1.998 opravil Skupno število rezov: 24.551 Teža: 900 kg Miza: nerjaveče jeklo z zračno podporo OPREMA 1× montiran POLAR 78 1× nov POLAR 78 SKH-2, 960×110×11,7 mm Vizualizacija procesa Hidravlično nihajno poševno rezanje LED indikator linije reza Zračno podprt delovni pult Robustno ohišje stroja Izjemno hitra menjava rezila s POLAR OptiKnife novo rezervno rezilo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Edge Banding Machine SCM Model Olympic 500 HP 'T-ER2' Type of offer: LEASE RETURN, Used Machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine designed for small and medium-sized businesses, capable of processing a wide variety of materials to a high quality standard in a compact footprint. The SCM Olympic 500 features electronic adjustment and enables processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the Human-Machine Interface (HMI) • Maestro connect: prepared for later installation without needing a gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, Radius = 1 mm - Fine trimming and radius scraper unit, Radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed “SAV€NERGY” KIT Internal lighting for the enclosure and glue application area “Nesting” tracing roller KIT Edge separating agent spraying unit "AAR" Spraying unit for final edge finishing Spraying unit for sensitive edges Ncedpfx Absq A Tyzebjl Jointing cutter unit "RT-V1" “EASY SIZE” device – electronic quick adjustment for the jointing cutter unit Glue unit "VC-VM" SGP glue pot for EVA & PU, including quick-change device Ceramic lamp with infrared rays for preheating workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfering and radius trimming unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" 'MULTIEDGE 3' KIT for automatic switching between straight/R/R modes, for the “Round 2-A Multiedge 1R” unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, nosilnost: 3.000 kg, dvižna višina: 450 mm, vrsta goriva: dizel, tip droga: triplex, moč: 56 kW (76,14 KM), Oprema: kabina, pogon na vsa štiri kolesa, spojka prikolice, JCB 930 4x4 Leto proizvodnje: 2003 Delovne ure niso znane! Dvižna nosilnost: 3 tone Gradbena višina: 2,74 m Dvižna višina: 4,50 metra Moč: 56 kW - Triplex dvižni steber - Bočni pomik - Zaščitna rešetka za tovor - Pogon na vsa kolesa - Kabina s gretjem - Razsvetljava - Takoj pripravljen za uporabo - Originalna barva Prodajna cena: 13.500,-- neto Nodpfxjxyk Ezo Abbjcl Možna tudi ugodna dostava!

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava Nsdpfoycg U Ejx Abbecl nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: rabljeno, • Holz Her Auriga 1308 XL FÜ + PU • Kompakte Bauweise – Kantenstärke 0,4–8 mm • SPS-Bildschirmsteuerung Edge-Control PPC 231 Touchscreen • Vorfräsaggregat zum Anarbeiten vor dem Verleimteil Ncjdpfx Abjycq Dwsbsl • Vollautomatisches Kantenmagazin für Rollen- und Streifenmaterial • Kleberauftragsstation GLU JET Patronen + PUR-Verleimung • Kleberauftragung mittels Düsentechnik • Werkstückhöhe 6–65 mm • Automatische Leimhöhenverstellung • Andruckwerk 1912-3 pneumatisch • Kappaggregat 1918 pneumatisch für Rollen- und Streifenmaterial bis 8 mm Kantenstärke • Mit pneumatischer Verstellung der Kappsägen von 0–10° für Schrägschnitte • Fräsaggregat 1827 MOT 4, bündiges Fräsen bis 8 mm, Radienfräsen, Fasefräsen – 15°, 1827 MOT NC-Achsen über Steuerpult • Formfräsaggregat 1832 pneumatisch, Abrunden der Ecken bis 3 mm Kantenstärke im Durchlauf • Ziehklingenaggregat 1929 MOT2 für Fasen und Radien mit 2 Ziehklingenträgern, NC-Achsen über Steuerpult • Flächenziehklingenaggregat – Finish • Schwabbelaggregat – Poliereinheit • Sprüheinrichtung im Ein- und Auslaufbereich • Komplette Werkzeugausstattung inklusive • Erstauslieferung 2013 • Maschine ist FUNKTIONSGEPRÜFT und in TOP-ZUSTAND • Ab Lager Lieboch

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Linija za pakiranje više apoena u jednoj vrećici (do 8 različitih). Sastoji se od 8 stanica. Svaka stanica ima spremnik za apoene koji se transporterima dovode do brojača. Na svakoj stanici brojač izbroji zadani broj apoena i priprema ih u tubi. U pravilnim intervalima tube se otvaraju i apoeni se prebacuju u vrećicu. Vrećica se potom zatvara termičkim zavarivanjem ruba. Linija je također opremljena pisačem koji omogućuje ispis po želji na vrećice. Za više tehničkih detalja obratite nam se. Dimenzije (D x Š x V): 5000 x 5000 x 2700 mm Ncsdpfovt Sp Sex Abbol

Stanje: rabljeno, Leto izdelave: 2001, - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Infinitely variable spindle speeds with 2 speed ranges - Horizontal milling attachment - Hydraulic tool clamping - 11 kW drive - Automatic central lubrication - Coolant system - Table enclosure - CE certification - incl. milling tools - incl. operating manual and documentation - Year of manufacture: 2001 - Complete service performed Technical Data Worktable: - Clamping surface: 1500 x 360 mm - Table load capacity: 800 kg Travel distances: - X-axis (longitudinal): 1000 mm - Y-axis (cross): 540 mm - Z-axis (vertical): 430 mm Working area: - Distance spindle nose/table: 50 - 480 mm - Distance spindle center/column: 350 mm Feeds: - Number of feeds: stepless - Feed (longitudinal/cross): 16 - 1200 mm/min - Feed (vertical): 8 - 450 mm/min - Rapid traverse (longitudinal/cross): 2500 mm/min - Rapid traverse (vertical): 1000 mm/min - Feed motors: 3 x 1.5 kW Ncedpfx Aswkvlkjbbel Main spindle: - Number of speed steps: 12 - Speed range: 40 - 1750 rpm - Speed graduations: 160, 225, 315, 440, 620, 880, 1240, 1750 - Drive power: 11 kW - Spindle taper: ISO50 DIN2080 - Milling head overhang: 420 mm Dimensions and weights: - Space requirement: 3050 x 2150 mm - Machine dimensions: 2050 x 2210 x 1830 mm - Machine weight: 2800 kg