Priloga Lepljenje Stroj nakup rabljenega (83.487)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo unit for corner copying Year of manufacture: 2009 Technical condition: very good - Stable machine frame, onto which individual machining units are mounted. - Feed drive with electronically adjustable feed speed range from 6–30 m/min (machining unit operating speeds are not synchronized with the full range of feed adjustment). - Feed chain guided in low-friction guides with plastic pads and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by the machine program. - Upper pressure beam made from a double V-belt, 70 mm wide, guided on ball bearing-supported rollers; pressure beam is electronically adjustable. - Safety guards corresponding to CE certification. - Soundproofing and protective enclosures. - Edging unit with drive installed in a fully enclosed oil bath with glue pot (1 main powered pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot fast-change system. - Touch-screen display. - End trimming unit for cutting off edge overhang at front and rear corners, with features including: pneumatic saw tilting 0–25°, straight and chamfer cutting, automatic saw positioning for corner chamfering for two different edge thicknesses (e.g. 0.4 and 1.2 mm) and adjustment of edge overhang cutting for corner copying. - All machining units equipped with chip extraction. - Novimat Contour series edge banders ensure very high processing quality due to the powerful corner copying unit and small gap between workpieces (~300 mm). Key technical data: - Edge material from roll thickness: from 0.3 to 3 mm - Paper, PVC and ABS edges: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum top edge overhang: • for edge thickness up to 8 mm – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum workpiece length in feed direction: 150 mm - Minimum workpiece width (for up to 25 mm thick elements): 65 mm - Minimum workpiece thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum workpiece thickness: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest element: 150 × 150 mm or 65 × 300 mm (note: * 65 mm width at maximum workpiece thickness of 25 mm) Machine technical parameters: - Workpiece feed speed electronically adjustable: 6–30 m/min (note: feed speed may be limited by specific units on the machine) - Workpiece overhang beyond feed chain: Fjdpfx Aow R S Sloh Dogh • 38 mm (with edge thickness 0.3–8 mm) • 30 mm (with edge thickness 8.1–20 mm) Electrical supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1271, max. Anleimerstärke : 2 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstücklänge : 180 mm Vorschubgeschwindigkeit : 7 m/min Aufheizzeit : 4 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Verstellung des Einlauflineals : manuell Kappschere bis : 2 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar mit Auslaufkanal Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Ecken-Abrundaggregat : pneumatisch zustellbar Flachziehklinge : Ja, tastend Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 7,4 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Fedpfx Ahovniu Us Djgh Schutzhaube : Ja Gewicht ca. : 750 kg Absaugdurchmesser : 140 mm Laufmeter ca. : 7900 m

Stanje: rabljeno, Robna lepilka Hebrock AKV 3005, dobro opremljena, možnost preizkusa pred nakupom. Tekočine pred rezkarji, predrezkarji, nanos lepila z valjem, ima izpust lepila, drugi lonec za lepilo v kompletu, pnevmatska predgiljotina, pritisni valji, končna krožna žaga za rez, gornja-donja rezkalna enota, R1–R2 pnevmatsko nastavljiva, profilna strgala, enota za obdelavo vogalov, tekočine pred strgali, ravna strgala, polirka, maks. debelina robnega traku v roli 3 mm, max. debelina obdelovanca 12 mm, stroj v zelo dobrem stanju. Fsdow I Sp Sjpfx Ah Djgh

Stanje: dober (rabljeno), Leto izdelave: 1998, Width: 94 cm Year of manufacture: 1998 Longitudinal seam unit Fold bottom device Disc gluing unit left HHS gluing unit for cold glue 4 nozzle glue heads Small format device Valco code reader Ejector Press belt Fgedpfswu Nqhsx Ah Djh

Stanje: kot nova (razstavni stroj), Pneumatically controlled edge banding machine with 7 units: Jointing milling unit including AIGNER diamond jointing cutter heads, with DIA quick-change knife system Konstantin and controlled edge air nozzle located behind the second jointing cutter head. End trimming saw unit with extraction system, including 2 pneumatically swiveling saw blades, adjustable and programmable from the control panel. Radius milling unit with pneumatic 2-position turret, adjustable and programmable from the control panel. Includes 2 quick-change motors with R=1mm radius cutter and 2 quick-change motors with R=2mm radius cutter. Corner rounding unit (copying milling unit) with insert bottom function and pneumatic 2-position turret, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1mm and radius 2mm, with pneumatic 4-position turret. The unit can also be engaged or disengaged pneumatically. Including extraction system with chip collection box for scraper chips. Flat scraper unit with 4-times usable scraper knives. The complete unit can be engaged or disengaged pneumatically. Removed glue residues are extracted. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal-lamella wheels for cleaning and polishing. General Equipment: - Entry fence with handwheel adjustment (jointing thickness setting) and digital display - Upper pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - High gloss package: roller scanning for radius milling unit, radius scraper unit, and flat scraper unit - Large visibility, noise, and protection enclosure for all units and the glue pot - Interior lighting - Operator panel with 15'' touchscreen and intuitive user guidance Fedew Rd Ixjpfx Ah Djgh - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap control - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with auger for long and tall workpieces (especially for PUR glue) - Additional quick-change glue pot - Pressure zone with 3 pressure rollers, with the first pressure roller being motor-driven - Heavy-duty roller shear for edges 54 x 3mm - Original RIEPE spraying device - Before the jointing milling unit: Separator LPZ II - Before the saw unit: Cooling and antistatic LP 289/99 - Before the milling unit: Lubricant NFLY - Before the buffing unit: Cleaning agent LP 193/63 Technical Data: Edge thickness: 0.4 - 3mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction connection: 3 x 150 mm Power connection: 9 kW - 400 V / Compressed air: 6 bar

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 4209/0408, Kuper FLI Veneer Splicing Machine Basic parameters: - Minimum veneer length: 500 mm - Minimum veneer width: 45 mm - Veneer thickness: 0.3–2.5 mm - Feed rate: 20–50 m/min - Heating zone length: 120 mm, heating bar: 0.46 kW - Working height: 930 mm Fgedpowi R Rlefx Ah Djh - Weight: 2050 kg

Stanje: zelo dobro (rabljeno), SCM Contura in excellent condition. Fedjt E T I Nspfx Ah Dsgh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, For sale is a complete glass bonding machine for components measuring 4m x 3.5m. More detailed information can be found in the pictures. The system can be inspected in operation by appointment. Fsdpfx Ahowbcy Ao Degh Dismantling to be carried out by the buyer. Availability: Immediately

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1008, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Device for gluing cardboard trays using hot melt glue from a Nordson glue applicator, capable of gluing and folding trays in various sizes. Fgodpfjw Ekl Isx Ah Djh

Stanje: rabljeno, Folder Gluer Bernhardt FKB 700 Year of Manufacture: 2010 - Serial No. 300310/86/FKB/700 Production Capabilities: Straight-line, 2- and 3-point gluing Material grammage: 200 – 600 g/m², E-flute corrugated Materials: solid paper from 200 g/m², cardboard, plastic Maximum blank size: 500 x 700 mm Compressed air required: min. 6 bar Maximum machine speed: 400 m/min Fedpfov H D Srex Ah Degh The FKB 700 is a multifunctional folder gluer for folding and gluing: Folders, CD sleeves, DigiPacks, and folding cartons. Online video inspection via WhatsApp, MS Teams, Zoom, or Telegram. Available ex stock Emskirchen/Nuremberg – Immediate availability – Test runs possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling a fully equipped edge banding machine, BRANDT ProfiLine KDF 790, year of manufacture 2006: Configuration: - Infeed fence manually adjustable - Jointing cutters manually adjustable Fjdpfx Aeh U Nzpjh Dogh - Edgebanding unit with pre-heating tank - Material pressure zone adjusted by servomotor - End trimming saws pneumatically adjustable - Top and bottom rough trimming manually adjustable - Top and bottom radius trimming adjusted by servomotor - Grooving saw unit bottom side - Corner rounding unit, 2-motor, servomotor-adjustable - Radius scraper R2 pneumatically retractable (second set R1 included) - Flat scraper - Buffing brushes - Separator spray unit at the front - Cleaning spray unit at the rear Working height adjustable by servomotor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min Total length including feed plate: 7,860mm Total glued: 1,650,000 meters Includes complete documentation and CE certificate. Very good condition, fully functional!

Stanje: rabljeno, Leto izdelave: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction/form milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Maximum workpiece height with form milling unit (depending on profile): 35-65 mm Edge thickness (coil): 0.4-3 mm Fgsdpfx Ahov R Nk Uj Djh Edge thickness (strips): 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection for edge banding: 80 mm Extraction connection for jointing: 120 mm Glue pot capacity: approx. 3 kg Heating time at 1/2 fill: approx. 10 min. Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return conveyor shown in the pictures Availability: short-term Location: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Numerically Controlled production line machine consisting of: - Upper gluing unit equipped with 8 injectors for the automatic application of glue. Fedpfx Ahjkzlkyo Dsgh - Shelf support insertion unit featuring 8 vertical gravity-fed magazines for the automatic supply of shelf supports. The machine is completed by: - Infeed roller conveyor for loading the workpieces - Outfeed roller conveyor for unloading the processed pieces

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, MAIN FEATURES MACHINE - Voltage: 380V / 50Hz / 3-phase - Total power: 6.5 KW - Air pressure: 0.6–0.8 MPa - Air tank: 2 l Fsdpfxewwikgo Ah Degh SUPPORT ARM - Total length: 2250 mm - Shape: round - Suction cup diameter: 300 mm and 140 mm - Load capacity: up to 100 KG - Large arm diameter: 165 mm - Small arm diameter: 114 mm EDGE BANDING - Material: PVC, ABS, melamine, veneer (customized) - Width: 14–70 mm - Thickness: 0.55–3 mm WORKPIECE SIZE Maximum dimensions depending on shape: - Round: Diameter 2400 mm - Rectangular: 1200 x 2400 mm - L-shape: 1400 x 1600 mm GLUE TANK Glue: PUR or EVA - Capacity: 2600 ml - Position: TOP - Gluing method: Single-sided - Temperature: 110–210 °C - Recommended use of low temperature adhesive from the manufacturer. GLUING - Edge banding speed: 0–20 cm/s - Minimum internal radius: R=20 mm – dependent on edge band thickness GLUE ROLLER - The position and pressing force can be adjusted to ensure optimal glue application on the edge band LASER RANGEFINDER FOR PRECISE POSITIONING - Function: Laser rangefinder, precise positioning - Positioning accuracy: +/- 0.4 mm - Requirement: Edge band length ≥ 400 mm EDGE BANDING - Width: 14–70 mm - Minimum rounding radius: ≥ 20 mm - Auxiliary joint roller CLEANING - Water-based cleaning liquid Trimming Unit - Rotatable +/- 15° TRIMMING, Rounding, Cleaning TRIMMING - Speed: 0–24 cm/s - Trimming method: 14 mm single 14–70 mm double CLEANING - Two cleaning devices The machine is manually operated – the main factors affecting the quality of the finished product are, in order, the operator, working speed, and materials such as glue and edge banding.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, SCM Olimpic K500 HP Edgebander Year of manufacture: 2024 Condition: excellent, only 17,000 meters of use Very comprehensive factory equipment: - Servo-controlled pressure beam - Pneumatically activated workpiece infeed stop - SGP glue pot for EVA or PUR adhesive - Pre-melter for EVA glue - SCM QMS with automatic glue feeding to the pot - Automatic edge band feeder - Servo-controlled pressure rollers and edge holder - Milling unit with multi-tool R1.R2.straight, 2-axis servo control - Corner rounding unit with multi-tool R1.R2, 1-axis servo control - Servo-controlled 2-axis radius scraper, multi-tool R1.R2 - Glue scraper - Polishing unit - Hot air blower - Three types of fluids: anti-adhesive, cleaning agent, for delicate edges - Factory-installed LED lighting Fodpew Dn R Sefx Ah Degh - Feed speed: 12 m/min, minimum element spacing: 60 cm

Stanje: rabljeno, Edge banding machine - Sumbel Perkeo Year of manufacture: 2014 - Serial No.: 40050 Max. working width: 60 mm Cold glue application system Fgjdpfx Ahswgdw Tj Deh --like new condition-- Online video inspection possible via WhatsApp, MS Zoom, or Telegram In stock in Emskirchen/Nuremberg - Immediately available - Test run possible

Stanje: zelo dobro (rabljeno), Hebrock AKV 3005 Edge Banding Machine Well-equipped, available for inspection before purchase PRE-MILLING cutters glue application by roller, with glue discharge function second glue pot included pneumatic pre-cut guillotine Fgodpfx Ajwy Uhpjh Deh pressure rollers finishing saw top-bottom milling unit, R1–R2 radius adjustment pneumatically controlled profile scraper interchangeable corner rounding unit for 1mm and 2mm flat scraper polishing unit max edge banding thickness (in coil): 3mm max strip thickness: 12mm feed: 2 speeds machine well-maintained, in very good condition

Stanje: rabljeno, Leto izdelave: 2004, Overview This cold glue labelling machine was manufactured in 2004 by the German company KHS. The machine remained in operation until January 2025 and is now stored at the company premises. The labeller is equipped with a camera system for precise alignment of neck labels on swing-top bottles. Technical Data Capacity: Up to 26,000 bottles per hour Operating direction: Counter-clockwise Formats supported: - 330 ml longneck glass bottles - 330 ml Steinie glass bottles - 330 ml swing-top glass bottles - 500 ml NRW glass bottles Label positions: - Front (up to 2 labels) Fjdpfx Ahjwhwwvj Djgh - Back (up to 1 label) Equipped with Siemens S7 PLC New HMI touch panel in 2019

Stanje: rabljeno, Kopf- und Kapitalbandmaschine mit Gazierstation Kolbus HL Baujahr 1970 Format / Größe: min. 125 x 100 x 6 mm / max. 370 x 270 x 80 mm Leistung: bis zu 36 Takte/Min. Fodev Ay Aropfx Ah Degh Bestehend aus: 1) Anleimstation 2) Kapitalband- und Hinterklebestation 3) Andruckstation Online-Video-Inspektion via WhatsApp – MS Zoom – Telegram Lagerort: Emskirchen/Nürnberg – Sofort verfügbar – Vorführung möglich

Stanje: rabljeno, Blockleimpresse / Block Gluing Machine Müro 4 x 5000 A3 WT 21 Pressstationen mit einer Stapelhöhe von 50 cm 1 Heißluftgebläse zum Trocknen Stapelhöhe max.: 52,5 cm Pressenbreite max.: 52,5 cm Pressentiefe max.: 32 cm Fgsdpfx Asiwg Azoh Deh Gewicht ca.: 60 kg Stromanschluss: 230 V – 1100/2150 W Online Video-Inspektion via Skype-Video möglich Über einen Besuch Ihrerseits würden wir uns sehr freuen – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Test möglich

Stanje: rabljeno, številka stroja/vozila: 59062, Creasing & gluing machine for covers – Karl Tränklein CGM Fgodoh Axd Nspfx Ah Deh Serial number: 59062/5 Maximum working width: 500 mm Online video-inspection via Skype available. We would be pleased to welcome you for an on-site visit – more machines in stock. Immediately available – can be inspected. Located in our warehouse in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Einwalzen-Anleimmaschine / Single Roller Gluing Machine Sumbel ENANO Arbeitsbreite max. 250 mm / Working width max. 250 mm Kaltleim / Cold glue Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Fjdporut Sgsfx Ah Degh Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Test vor Ort möglich

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: 1031295, Hotmelt adhesive system – Nordson Meltex MX 4012-1X2 hot melt glue machine, year of manufacture 1995, serial no. 01031295 Online video inspection via Skype video call available. We would be pleased to welcome you for an on-site visit – more machines in stock. Available immediately – can be inspected. Fgsdpsh Axhlefx Ah Deh Machine in stock at Emskirchen / Nuremberg – test run possible.

Stanje: rabljeno, številka stroja/vozila: 110, Two-roller Gluing Machine Sumbel Herold, Serial No. 110 Fedpfxsrut Skj Ah Dogh Roller width: 500 mm Working speed: 4–20 m/min Suitable for cold glue Online video inspection possible via Skype We would be pleased to welcome you for an inspection—more machines available in stock Available immediately—can be inspected In stock in Emskirchen / Nuremberg—test run possible

Stanje: rabljeno, številka stroja/vozila: 12, Edge Banding Machine - Jagenberg KAM 60, Serial No. 12.30124/11 - Max. working width: 60 mm - Cold glue system - Online video inspection via Skype available - We would be pleased to welcome you for a visit – more machines in stock - Available immediately – inspection possible Fedpsk Tu Eksfx Ah Dogh - Located in Emskirchen / Nuremberg – test run possible