Prenos Opore nakup rabljenega (557)

Stanje: rabljeno, Rotacijski transferni stroj znamke Technica, model Stemoflex Hsdpfxeydcm Ho Ag Tsi

Stanje: rabljeno, moč: 2 kW (2,72 KM), barva: črn, skupna masa: 120 kg, Leto izdelave: 2018, BE-COOL LC 440 Mobile adiabatic air cooler Air flow rate: 32,200 m³/h Speed: Variable Water tank: 180 L Hedpsyddnrofx Ag Tji Noise level: 50 dB ~ 70 dB Dimensions (cm): 186 (H) × 155 (W) × 81 (D) Weight: 120 kg Power consumption: 1.35 kW (1250 Watts) If you have any questions regarding the machine or would like to schedule a viewing appointment, please feel free to contact us by phone or email.

Stanje: kot nova (razstavni stroj), trajanje garancije: 12 meseci, vrsta hlajenja: voda, dolžina paketa cevi: 8.000 mm, električna varovalka: 32 A, Certificirano po DGUV do: 02/2027, maks. debelina aluminijaste pločevine: 10 mm, Primarna stikalna napajalna enota, varilne lastnosti najvišjega razreda, popolnoma digitalno krmiljenje procesov, sistem CAN-Bus, digitalna HF-vžigalna naprava s procesno vodenim vžigalnim potekom, baza parametrov, Tiptronic za shranjevanje in priklic 100 nalog, po potrebi voden hladilni krogotok, tekočinsko hlajena gorilnik, dialogsko vodenje v jasnem jeziku. Tehnični podatki: Omrežna napetost: 400 V, varovalka: 16 A počasna, nastavitveno območje: 3 - 300 amperov, napetost v prostem teku: 10 - 60 V, AC-frekvenca: 30 - 20 Hz, AC-balance: 10 - 90 %, varilni tok DC: 300 A (pri 20°C) - 250 A (pri 40°C) 100 % delovni cikel, enako AC-DC: 300 A (pri 20°C) - 250 A (pri 40°C) 100 % delovni cikel, varilni tok DC: 300 A (pri 20°C) - 300 A (pri 40°C) 60 % delovni cikel, enako AC-DC: 300 A (pri 20°C) - 300 A (pri 40°C) 60 % delovni cikel, faktor moči: 0,99, stopnja zaščite: IP 23 EN 60529 / IP 23, hladilni tip: F, teža: pribl. 108 kg. Dobava vključuje: varilni kabel in navodila za uporabo. Hedpeyhpldsfx Ag Tsi

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approximate machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations and 15 drilling and milling spindles E.g., suitable for the production of large batches of fittings Further technical specifications: - Workpiece carrier: Drum-type workpiece holder, Ø 800 mm, for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; maximum speed 2240 rpm - Left side: 3x drilling/milling and drilling spindles, 2x tapping spindles - Right side: 2x drilling/milling spindles, 2x tapping spindles and 1x U-axis, plus radially 2x movable tapping spindles, 2x drilling/milling spindles (one of which is movable), and 1x movable U-axis - 1st tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation Hjdeu Idvwopfx Ag Toi - 2nd tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pulse generator as is.

Stanje: rabljeno, Technical details: Number of spindles: 11 units Number of stations: 11 units Spindle taper: SK 40 Required air pressure: 6 - 7 bar Total power requirement: 13 kW Approximate machine weight: 10.2 t Space requirement approx.: 4.0 x 4.0 x 3.4 m Machine dimensions: 3.4 x 3.45 x 2.9 m Control cabinet dimensions: 2.1 x 0.4 x 1.9 m Thread cutting and drilling machine with 11 drilling and milling spindles Hedpju Idw Iofx Ag Tji Optional accessories available. Please inquire! - Workpiece holding drum Ø 1000 mm with workpiece carrier and 8 workpiece clamping stations, self-centering chuck jaws 260 mm between jaws, max. 20 mm clamping jaw stroke (oil-pneumatic circuit) - 11 working stations with SK 40 spindle interface - Right: 4x drilling-milling spindle, left: 4x drilling-milling spindle, and 3x radial drilling-milling spindle - Drilling unit: spindle stroke 125 mm, feed rate 0 - 2 m/min, speed 164 - 1005 rpm in 12 steps - Tapping units: working stroke 125 mm, reversible direction, speed 31.5 - 194 rpm in 12 steps - Opposed drilling units: 8 units with SK 40 interface - Coolant system with supply line - Operation via control panel - With chip collecting box, L: 1000 x W: 740 x H: 220 mm ID.

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant Hjdpfeu Idxfjx Ag Tei This machine is not connected. Sale as is! Subject to prior sale.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm Hjdpfx Ageu Idv Do Tsi No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel - Hand-held control unit in good condition.

Stanje: rabljeno, Technical Details: Spindle mount: 40 Number of spindles: 9 units Approx. machine weight: 10.0 t Total connected load: 13 (17.5 HP) kW Machine dimensions (LxWxH): 4100x3400x3200 mm Control cabinet dimensions (LxWxH): 2100x350x1900 mm TRANSFER AUTOMAT - DRILLING AND THREAD CUTTING AUTOMAT - INDEXING TABLE MACHINE with 9x drilling and milling spindles - Workpiece carrier with 8 clamping stations: workpiece drum Ø 1000 mm (oil-pneumatic circulation), clamping stations equipped with self-centering jaws Hjdpfx Agou Idwbe Tji - Right side: 2x drilling/milling spindles, 1x with flexible U-axis and 1x thread cutting unit with 9-step flexibility - Left side: 2x drilling/milling spindles, 1x with flexible U-axis and 1x thread cutting unit with 9-step flexibility, plus 2x radial flexible drilling/milling spindles and 1x thread cutting unit, 9 steps, flexible - Drilling unit: SK 40 mounting; spindle stroke 125 mm; feed 0 - 2 m/min; speed in 12 steps from 164 - 1005 rpm - Drilling and facing unit: SK 40; spindle stroke 90 mm; feed 0 - 2 m/min; rapid traverse 7.5 m/min; speed in 12 steps from 166 - 1020 rpm - 3 thread cutting units: SK 40 mounting; working stroke 125 mm; speed in 12 steps from 31.5 - 194 rpm; right- and left-hand rotation - 6 opposed drilling units: SK 40 interface Equipment: - Coolant system with supply - Operation via control panel - Chip box - Counter - Access staircase

Stanje: rabljeno, Technical Details: Spindle mount: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15–20 sec Speed: drilling 225–1037 rpm Speed: threading 50–316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Machine weight approx.: 9.0 t Space requirement approx.: 3.9 x 2.4 x 2.5 m Machine dimensions: L: 3.9 x W: 2.2 x H: 2.7 m Dimensions L x W x H: + system 2.7 x 2.52 x 2.25 m Transfer Machine The machine can be offered fully overhauled. (Photos show original condition!) The machine is designed for machining workpieces in a single clamping operation. Primarily, Ms blanks with Ø 90 mm x approx. 100 mm length were machined on it. Description: - Workpiece carrier indexing table with clamping stations, round table type with horizontal axis, equipped with 5 workpiece stations. Machining units: - Drilling spindle and thread-cutting units - Drilling capacity up to 2 3/4" and 81.53 mm in Ms - Thread cutting up to 2 1/2" and metric threads The machine is equipped with a feeding and unloading unit for workpieces. (Feeding rate 3–4 pcs/min and cycle time 15–20 sec.) Hodpsu Idycjfx Ag Toi Also includes coolant system in original condition.

Stanje: rabljeno, Technical Specifications: Number of spindles: 9 units Hjdpfxsu Idvkj Ag Toi Total power requirement: 83.0 kW Machine weight approx.: 17.0 t TRANSFER AUTOMAT with 9 drilling and milling spindles - On the right: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; and on the left: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; as well as 3 radial drilling and milling spindles, 9-speed, gear-driven, fixed inside diameter.

Stanje: rabljeno, Technical details: Number of spindles: 9 units Machine weight approx.: 10.2 t TRANSFER MACHINE with 9 drilling and milling spindles - right side: 2x drilling and milling spindles and 1x tapping spindle, each with 9 steps Hjdpfxou Idwns Ag Tsi - left side: 2x drilling and milling spindles and 1x tapping spindle, each with 9 steps, plus 2x radial drilling and milling spindles (flexible) and 1x tapping spindle, 9 steps, flexible in. D.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm Hedpfx Aou Idxreg Tsi No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K.966610 M, skupna višina: 3.056 mm, skupna dolžina: 4.825 mm, skupna širina: 3.500 mm, Ponujamo zelo dobro ohranjen avtomatski rotacijski stroj blagovne znamke Mikron Multifactor tip 60.015. Stroj iz leta 1997 je zelo lepo vzdrževan in takoj pripravljen za uporabo. Obdelava struženih delov je možna na do 15 postajah (maksimalno 60 taktov na minuto). Hjdpsx Ura Eofx Ag Tei Možno je dovajanje materiala v palicah ali obročih. Če imate dodatna vprašanja ali potrebujete več informacij, nas prosim kontaktirajte!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, EUBAMA S6, year 2010. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Hjdpfx Agjv Ef N Aj Toi Maximum output (cycles/min): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of machining units: 15 PRA 52 P IEMCA bar feeder Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank The machine is in working condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Manufacturer: KNAPP STREAMLINE Year of manufacture: 2010 Drive: SEW-Eurodrive motor Transverse roller conveyor DPP – Dynamic Positioning Platform Motorized roller conveyor with sensors. Dynamic material positioning – Incoming cartons, boxes, or trays can be positioned, rotated, or precisely conveyed by the system. Change of direction, distribution – The unit can transport goods in different directions, to other conveyor lines, or to other machines. Stop and buffer – Can also serve as an automatic buffer. Transfer Roller Section: Length: 765 mm Width: 325 mm Transfer roller diameter: 50 mm Conveyor Roller Section: Length: 335 mm Width: 325 mm 4 support rollers: 50 x 310 mm Overall dimensions: Hjdpfx Agjf Arpbo Tji Width: 800 mm Length: 1250 mm Height: 530 mm

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: nefunkcionalno, skupna višina: 2.500 mm, skupna dolžina: 12.000 mm, skupna širina: 4 mm, moč: 65 kW (88,38 KM), skupna masa: 10.305 kg, Premer palice (maks.): 110 mm, Premer cevi (maks.): 110 mm, stružna dolžina: 350 mm, premer obdelovanca (maks.): 110 mm, Oprema: dokumentacija / priročnik, We are offering this used Sinico SIN-O-MATIC TOP 2000 saw and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control: NUM Hjdpfx Agjycr Nhj Tei Automatic machine for cutting to length and end-finishing. Transfer machine with a horizontal axis table for cutting and end-machining of pipes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 pieces/hour, and is designed for machining small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for processing tubes and bars. Capable of performing the following operations: Beveling – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled, but it has a fault and therefore cannot be demonstrated. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: rabljeno, vrsta goriva: električni, Electronic control unit for electric forklift trucks, drive motor, traction motor, motor control, motor controller, control unit, drive control, digital control unit, electronic steering controller, proportional amplifier Hjdpfx Agegp Tnho Toi - Manufacturer: Jörgensen, Proportional Amplifier - Model: C257000005 / Version: P25727 - ID: 10533 - Dimensions: 110/60/H30 mm - Weight: 0.2 kg

Stanje: rabljeno, PLC handover element, terminal, terminal block, feed-through terminal -Manufacturer: Weidmüller -Type: E-694.0/84 Hjdpecc Hu Tjfx Ag Toi -Dimensions: 105/185/H75 mm -Weight: 0.51 kg

Stanje: rabljeno, corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with strip feeder, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS Hjdpfetrhmqox Ag Tei -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm -Conveying length: 1250 mm -Axle spacing: 250 mm -Roller pitch: 250 mm -Rollers: rubber-coated -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Quantity: 1x transfer station available -Transport dimensions: 1740/1550/H680 mm -Weight: 410 kg

Leto izdelave: 2009, Stanje: rabljeno, right-angle transfer, roller conveyor, roller track, driven roller conveyor, roller conveyor, roller track with strip feeder, transfer station - Manufacturer: Grenzebach, transfer station roller conveyor type WRS - Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm - Intermediate dimension: 1500 mm Hsdpfxjtrhncj Ag Tei - Conveyor length: 1250 mm - Axle spacing: 250 mm - Roller spacing: 250 mm - Rollers: rubber-coated - Lifting: pneumatic - Belt conveyor length: 1400 mm / belt spacing 2x 480 mm - Quantity: 3x transfer stations available - Price: per unit - Transport dimensions: 1700/1500/H1040 mm - Weight: 412 kg

Stanje: dober (rabljeno), Reduktorski motor, elektromotor, trifazni motor, elektroreduktorski motor - Proizvajalec: Bonfiglioli, reduktorski motor - Obrati: 22,5 obr/min Hedpfx Aoxal Udsg Tsi - Reduktor: tip VF30 N P56B14 i= 60 - Motor: tip BN 56 B4 0,09 kW - Izvedba: B3 kotna - Votla gred: Ø 14 x 55 mm - Zaščitni razred: IP 55 - Količina: 3x reduktorski motor na voljo - Cena: na kos - Dimenzije: 260/145/V120 mm - Teža: 4,1 kg/kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Servomotor, motor z reduktorjem, elektromotor -Proizvajalec: Lenze, servomotor z reduktorjem -Hitrost vrtenja: 49,7 obr/min -Motor: Tip MCA 10140-RS0B0 -Napetost: 390 V / 140 Hz -Moč: 0,80 kW -Reduktor: Tip G50BH121MVAR3C00 i=79,507 -Gred: Ø 25 x 50 mm -Količina: 6x motor z reduktorjem na zalogi Hodpfx Aextab Sjg Tji -Cena: na kos -Dimenzije: 485/160/H150 mm -Teža: 12,9 kg/kos.

Stanje: rabljeno, Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with stripping conveyor, transfer station - Manufacturer: Grenzebach, transfer station roller conveyor type WRS Hodpetlzgwsfx Ag Tsi - Drive motor: 0.18 kW, 88 rpm - Intermediate width: 1500 mm - Conveyor length: 1250 mm - Axle pitch: 250 mm - Roller pitch: 250 mm - Rollers: rubber-coated - Lifting: pneumatic - Belt conveyor length: 1400 mm / Belt spacing: 500 mm - Quantity: 2x transfer stations available - Price: per unit - Transport dimensions: 1750/1570/H2020 mm - Weight: 496 kg/unit

Stanje: rabljeno, right-angle transfer, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with extraction feeder, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive motor (roller conveyor): 0.18 kW 88 rpm -Drive motor (conveyor belt): 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveying length: 1250 mm -Axle spacing: 250 mm -Roller spacing: 250 mm -Rollers: rubber-coated -Lift: pneumatic Hedpfetlzgzex Ag Toi -Belt conveyor length: 1400 mm / belt spacing: 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg

Leto izdelave: 2009, Stanje: rabljeno, Transfer conveyor, roller conveyor, driven roller conveyor, powered roller track, roller conveyor with strip feeder - Robust design - Electrically powered - Drive motor for roller conveyor: 0.18 kW, 71 rpm Hsdjb A S Uyepfx Ag Tji - Drive motor for conveyor belt: 0.18 kW, 88 rpm - Roller width: 1440 mm - Conveyor length: 1550 mm - Transfer belt: 1400 mm - Pneumatic lifting - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 950 mm, adjustable - Driven by timing belt - Quantity: 1 roller conveyor available - Price: per unit - Dimensions: 1550/1650/H950 mm - Weight: 420 kg