Luknjo Preša nakup rabljenega (235)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Window mounting press Gbsdpjt T Srpjfx Afqjg

Stanje: rabljeno, Leto izdelave: 1965, Pressing force 160 t Gedpfx Aevuk S Usfqebg Stroke 15 - 170 mm Strokes per minute 15 - 40 Frame gap width 2050 / 1900 mm Shut height (stroke + ram adjustment top) 690 mm Side frame opening 800 mm Table area 1600 x 800 mm Table height above floor 900 mm Ram area 1620 x 700 mm Ram adjustment 140 mm Drive power 15.0 kW Weight 24.0 t Space requirement approx. 3.3 x 2.3 x 5.3 m (L x W x H) Total height above floor 4.8 m Pit depth 0.5 m Approved only for use with safe tooling or fixed guards in accordance with German accident prevention regulations (UVV) Equipped with infinitely variable drive, pneumatic clutch, pneumatic ram weight compensation, motorized ram adjustment, two-hand and foot control As is, where is, NOT commissioned

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: Cone G25_neu, Electric Press Brake G25 with Ball Screw Drive CoastOne - Made in Finland New machine Pressing force: 104t Bending length: 2600mm Controlled axes: X-R axis (2x manual backgauge fingers) Standard Type A / R1 / AMADA / Promecam press brake tool clamping system Control: TC15-2D graphic touchscreen Gbedpfox Tg Alsx Afqsg Options: - 4 or 5 axis backgauge system - Lazersafe light curtain system Standard - Lazersafe IRIS light curtain system - Lazersafe IRIS+ light curtain with angle measurement system - extra monitor with 3D bending software - support table - lighting front and rear - WILA / Trumpf / Type B - tool clamping system - 2x bending aids 36 months warranty after installation

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With automatic strip feeder BBV 300/200 600 kN | 100–800 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Nominal force: 600 kN Strokes per minute: 100–800 Max. feed length: 200 mm Year of manufacture: Unknown (no nameplate) / Function test: 2025 Drive power: 30 HP Control voltage: 24 V AC Power connection: 440 V AC / 50 Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 / 51 / 58 / 64 / 70 / 76 mm Shut height/ram adjustment: 80 mm Working dimensions: Max. tool width: 620 mm Strip width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max. strip width: 300 mm Max. feed pitch: 200 mm Max. material thickness: 6 mm Feed angle: 180° Machine dimensions: Footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Gbjdpfxoxz Ugxj Afqsg Features: BBV 300 feed system – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediately available in Europe Worldwide shipping possible Contact us today for pricing and further technical details. We are happy to assist you in upgrading your production line with Swiss precision technology.

Stanje: rabljeno, Nouvel appareil de montage de flexibles DAEWOO type DA5100-HC Presse à flexibles hydraulique, presse à flexibles d’atelier pour sertissage de raccords de flexibles N° de série : 25DW05950ALE01 Année de fabrication : 2025 Force de sertissage : 500 tonnes Plage de sertissage : Ø 1/4 à 2" (15-63 mm) Ouverture max. de la matrice : env. 75 mm Débit de la pompe : 6 L/min Capacité de travail : 200 pcs/h Pression hydraulique : 315 bars Puissance moteur : 3 kW Alimentation : 400 V, 50 Hz - 2 modes de fonctionnement : manuel et automatique - Commande par bouton-poussoir ou pédale Godpfxjx Srwfe Afqjbg - Réglage du trajet de pressage par vis moletée - Changement rapide pour le passage à d’autres diamètres de flexibles Les mors s’insèrent facilement dans les guides et sont maintenus magnétiquement - 10 jeux d’outils, matrices de sertissage (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Socle d’armoire avec unité hydraulique Dimensions (L x l x H) : 700 x 500 x 1250 mm Poids : 270 kg Neuf – jamais utilisé

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vijačni stiskalnik Farmet FL200 za oljno ogrščico/sončnico/sojo, s končno geometrijo, v zelo dobrem stanju. Motor 22 kW, kapaciteta 400 kg/h (s predtiskanjem 500 kg/h), lamele in geometrija pregledane, dobro ohranjene. V kombinaciji z ekstruderjem Farmet FE500 (iz naše ponudbe) lahko procesira sojo s kapaciteto 400 kg/h. Gbodpsxa Hy Ujfx Afqjg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Gedpfsx A U Ncsx Afqjbg Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: rabljeno, Leto izdelave: 1980, Pressure 100 t Stroke 20 - 200 mm Strokes per minute 20 - 60 Gap between columns 1230 mm Installation height (stroke + ram adjustment at top) 650 mm Lateral column passage 540 mm Table surface 1050 x 750 mm Table height above floor 760 mm Ram surface 1000 x 750 mm Ram adjustment 100 mm Drive power 18.0 kW Weight 20.5 t Gbedpfjvuk H Eox Afqjg Space requirement approx. 2.8 x 1.9 x 4.3 m (LxWxH) Only permitted for use with safety tooling or fixed guards in accordance with German accident prevention regulations (UVV). Features steplessly adjustable drive (PIV), pneumatic clutch/brake combination (Desch), hydraulic overload protection in the ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, motorized oil circulation lubrication, two-hand and foot operation. As is, where is, WITHOUT commissioning.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer! First Warranty Inspection Completely Free: Special offer available only to customers who participated in a demonstration before purchase – in the Otinus Machinery Showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-3116-PRO DA-66T” Technical Specifications - Nominal Pressing Force: 1,600 kN - Motor Power: 15 kW - Approach Speed: 160 mm/s - Bending Speed: 10 mm/s - Return Speed: 130 mm/s - Weight: 9,700 kg - Oil Tank Capacity: 210 l - Maximum Bending Length: 3,100 mm - Distance Between Side Frames: 2,550 mm - Beam Width: 1,600 mm - Table Height: 880 mm - Maximum Open Height: 540 mm - Maximum Ram Stroke: 260 mm - Table Width: 60 mm - Throat Depth: 410 mm Tooling - Automatic, servo-driven back gauges on linear guides: 2 pcs - Front supports: 2 pcs - Back gauge (X-axis) adjustment: electric motor - Ram control (Y-axis): independent control of Y1 and Y2 axes via servo drive - Punch clamping type: quick-release AMADA type Control System “Delem DA-66T” - Graphical programming unit with 2D and 3D touchscreen - 3D visualization for simulation and processing - High-resolution 17-inch TFT color screen - Full Windows operating system - Compatible with the “Delem Modusys” system (modular scalability and flexibility) - External USB port - Comprehensive user support in a multitasking environment - Bending with sensors, including parameter correction menu - Offline Profile-T3D software High-Quality Components - Rexroth German brand hydraulic valve - Electrical components by Schneider - Safety circuit elements by Omron and Schneider Safety Machine delivered with comprehensive German-language operating manual. Device includes CE declaration of conformity. Financing For customers interested in financing Otinus machinery, we offer support in securing financial solutions. We also encourage you to take advantage of our consulting services. We cooperate with various banks to find the best leasing, loan, or credit offer tailored to your needs. The following services are included in the machine price: Two days of training and machine installation - Day one, up to 8 hours: installation and control system training. - Day two, up to 8 hours: independent operation under the supervision of our technician → possibility to program specific parts as required by the customer. Telephone Support by an Otinus Specialist From 7:30 AM to 9:00 PM (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of Cooperation - 24-month warranty period. - Preparation and start-up time: approx. 6–8 weeks. Not applicable if the machine is marked as "available from stock." - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer assumes responsibility for the machine once it is unloaded and transported on their company premises. Gsdpfx Aju T H Iqofqebg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, • Model: SIAT L33 150 TC • Stroj v zelo dobrem stanju, popolnoma prenovljen leta 2022. • Tip stroja: Polavtomatski, tribarvni fleksotiskarski stroj • Barvni tisk: Do 3 barv • Širina traku: 150 mm • Tiskalna širina: 150 mm • Na materiale: PVC, OPP, OPP akril, celofan, papir in ojačane folije • Uporaba: Predvsem za tiskanje na samolepilne trakove • Centralni tiskalni boben: Ogrevan, s keramičnimi bobni • Previjanje: Avtomatski previjalni stolpi z avtomatskim spajanjem tiskanega traku na prazna jedra • Corona obdelava: Da • Rezanje: z rezili • Sušenje: 3 sušilni tuneli z vročim zrakom • Nadzor hitrosti: Do 160 m/min, nastavljivo z inverterjem • Maksimalni premer role (odvite): 360 mm Godsxznwkjpfx Afqsbg • Maksimalni premer role (navite): 300 mm • Premer odvitne gredi: 3 inče

Stanje: rabljeno, Rabljena klarifikacijska filtrska stiskalnica iz nerjavečega jekla Seitz Orion tip OF 100/150. Stiskalnica ima 154 filtrske plošče iz nerjavečega jekla z dimenzijami 1000 mm x 1000 mm ter dve končni plošči. Filtracijska površina približno 310 m2. Stroj ima hidravlično zapiranje. Montiran je na okvirju iz nerjavečega jekla. Priloženi so priključki za dovod, manometri in lokalna kontrolna plošča. Specifikacije: Material: Nerjaveče jeklo Velikost plošč: 1000 mm x 1000 mm Število plošč: 154 filtrskih plošč iz nerjavečega jekla Preboji: 4 Godpfsx Ni Aaex Afqebg Tip plošče: Klarifikacijska Filtracijska površina: 310 m2 Zapiranje: Hidravlično

Stanje: novo, Leto izdelave: 2026, Vrtalni in vijačni stroj za hkratno vrtanje, lepljenje in vbijanje moznika v sistemu 32 mm z večvretensko vrtalno glavo in nastavljivimi postajami za moznike. Kratek opis: • Univerzalni vrtalni in vijačni stroj za moznike • Zelo enostavno upravljanje Gedpfxedx Aw Ne Afqebg • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijska dodatna vertikalna vrtalna enota • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev za nesting stroje

Stanje: rabljeno, Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 240 t, širina odpiranja: 150 mm, dolžina plošče: 3.300 mm, delovna višina: 900 mm, širina plošče: 1.400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating platen size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating platens: 2 units – Heating platen thickness approx. 40 mm – Number of hydraulic cylinders: 6 units – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack-and-pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic controls – Roller conveyor (disc rollers) before/above loading station – Roller conveyor (disc rollers) approx. 2000 x 1400 mm – Disc rollers run in a water bath – Roller conveyor with mobile support legs – Discharge roller conveyor approx. 3300 x 1400 mm – Hot oil heater HG 80 for heat transfer oil – Heating capacity approx. 80,000 kcal/h – Oil burner for light fuel oil – Year of manufacture 1972, single owner, well-maintained condition – Sold from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test operation possible by appointment Gbedpfxox Nr Ede Afqog

Stanje: rabljeno, Leto izdelave: 2010, Pressure: 600 t Column width: 3,640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1,550 mm Lateral column passage: 2,200 mm Table area: 3,600 x 2,500 mm Ram area: 3,600 x 2,500 mm Ram adjustment: 400 mm Strip width: 2,000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1,600 x 2.5 mm² Coil weight: 35.0 t Gedpfsvut Dysx Afqobg Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blank cutting line (press, coil line, blank stacking system) Year of manufacture: 1993 - 2010, new Siemens S7 control system - Press: Schuler EBS 4-600-3.6-350, with infinitely adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram balance, motorized ram adjustment, ram locking Sliding table (2x) without rails for the moving table - Decoiler: Schleicher HE-355-2100, year 1994, with auxiliary drive, pressure device, movable - Coil loading car - Strip pull-off device Schleicher - Scrap shear - Straightening machine: make Schnutz, type RME 18/50/13-2000 TZ, year 1994, with infinitely adjustable drive, 30 intermediate rolls, 117 support rolls - Loop bridge - Roll feed unit: make Schleicher, type WV-SYS-A 160-2000, year 1994 Blank stacking system / destacker: NSM Magnettechnik Dismantled and stored – video at the owner prior to dismantling available

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-4020-CNC Delem DA-58T Technical Specifications - Rated force: 2000 kN - Maximum bending length: 4000 mm - Depth (distance between tool and rear wall): 320 mm - Maximum ram stroke: 200 mm - Maximum opening height: 480 mm - Distance between side frames: 3200 mm - Maximum backgauge travel: 600 mm - Motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13,700 kg Equipment - Front sheet supports: 2 pcs. - Backgauge adjustment (X-axis): servo drive - Ram adjustment (Y-axis): servo drive - Backgauge finger height adjustment (R-axis): manual - Punch clamping type: AMADA-style quick-release Delem DA-58T Control - Advanced operator assistance algorithms - Enhanced graphical bending operation simulation - Operator guidance - Algorithms for production process optimization - Automatic crowning Manual Crowning (optional*) This function ensures that the bent sheet maintains a consistent bending angle along its entire length. Automatic Crowning (optional*) Enables the control system to monitor and automatically adjust the crowning, ensuring optimal settings at all times. OCS – Oil Cooling System The oil cooling system guarantees stable machine performance even during prolonged operation. Gsdpfx Aotizayefqjbg Professional Support We are committed to maintaining ongoing contact with our customers. That’s why we offer a package of expert support hours from Otinus technicians with every machine purchase. Come and test our machines Participate in an exclusive demonstration by a qualified Otinus technician showcasing all the machine’s capabilities. You can bring technical drawings and sample materials. Included with the machine: A two-day operator training and commissioning - Day 1 (up to 8 hours): Commissioning and control system training - Day 2 (up to 8 hours): Independent work on the machine under supervision from our technician, including programming of specific parts Telephone consultation by a specialist - From 7:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months Free loan of transport rollers and two jacks for easier installation at the customer’s site. Rollers and jacks are provided upon prior request (at least 7 days before machine delivery). Terms of collaboration - Warranty period: 24 months - Delivery time: approx. 6–8 weeks This does not apply if the machine is marked as available from stock. - The machine is brand new - Seller warranty and post-warranty service - The customer is responsible for the machine during unloading and transport on their premises.

Stanje: rabljeno, Tehnični podatki: 3 sekcije dolžine 6.400 mm Sekcije stiskalnice lahko delujejo skupaj ali posamezno Največja dimenzija lepljenega elementa: 4.600x1.180x200 mm v eni sekciji Hidravlični pritiski: 24 zgornjih/navpičnih – 8 na sekcijo Gjdpfx Aox Id Diefqebg Prednji navpični pomični uporni pritiski: 24 – 8 na sekcijo Napajanje: 400 V Moč motorja: 2,2 kW Skupne dimenzije: Dolžina: 19.200 mm Širina: 1.200 mm Višina: 2.300 mm

Stanje: pripravljen za uporabo (rabljen), -Drilling diameter 5~25 mm -Drilling depth 1000 mm -Tailstock -Tank Gbsdpfx Asdgpltefqog -Pump -Filter

Stanje: dober (rabljeno), Leto izdelave: 1973, Waste compactor container, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary compactor for: roll-off containers Gbodpeb A Ii Sefx Afqeg - Feed chute: covered - Compaction process: hydraulic - Compaction process: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for roll-off containers - Function tested

Stanje: rabljeno, Leto izdelave: 1973, Tlak 500 t Razdalja med stojali 1620 mm Hod 40 - 160 mm Število hodov 32 / 48 hodov/min Vgradna višina (hod + nastavitev kladiva zgoraj) 660 mm Stranski prehod med stojali 400 x 430 mm Površina mize 1600 x 1300 mm Višina mize nad tlemi 750 mm Gedpfxjvuk Eue Afqsbg Površina bata 1400 x 1200 mm Pogonska moč 44,0 / 66,0 kW Teža stroja pribl. 56,00 t Prostor pribl. 3,55 x 2,55 x 5,1 m s pnevmatsko sklopko/zavoro (Desch), mehanskim varovalom proti preobremenitvi v batu, pnevmatskim izravnalcem teže bata, motornim nastavljanjem bata kot stoji in leži, BREZ zagona Video 'sestrskega stroja' na voljo

Stanje: novo, Leto izdelave: 2024, Hydraulic Press Brake PBO-3220-CNC OT-41 Technical Parameters - Nominal force: 2000 kN - Maximum bending length: 3200 mm - Throat depth (distance between tool and rear wall): 320 mm - Maximum ram stroke: 200 mm - Maximum opening height: 480 mm - Distance between frames: 2700 mm - Maximum backgauge distance: 600 mm - Motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10,600.0 kg Tooling - Front sheet supports: 2 pcs - Backgauge adjustment (X-axis): Servo drive - Ram adjustment (Y-axis): Servo drive - Height adjustment of backgauge fingers (R-axis): manual - Punch clamping system: AMADA-type quick-release CNC OT-41 Control The Otinus CNC control features a user-friendly and intuitive menu. The software automatically calculates the bending angle. The large color touchscreen is easy to read from any angle. Manual Crowning (optional*) This feature allows the operator to ensure consistent bending angles along the entire workpiece length. Automatic Crowning (optional*) Gbjdpfx Aeium Dhsfqjg Allows the controller to monitor automatic crowning. This ensures the adjustment value is always optimally set. OCS - Oil Cooling System The oil cooling system ensures stable machine parameters, even during prolonged continuous operation. Expert Support We maintain continuous contact with our customers. Therefore, with every machine purchase, we offer an hourly package for professional support by Otinus technicians. Come and Test Our Machines Participate in a live demonstration by a qualified Otinus technician showcasing the machine's full capabilities. You are welcome to bring in technical drawings and sample material. Included with the machine: A 2-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and training on the control system. - Day 2 (up to 8 hours) – independent operation of the machine under supervision of our technician, including the possibility to program specific components. Telephone support by a specialist - From 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months. Free loan of transport rollers and two jacks to facilitate machine installation at the customer’s premises. Rollers and jacks will be provided upon prior request (minimum 7 days before delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approximately 6-8 weeks. Not applicable if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service by the seller - The customer is responsible for the machine during unloading and transportation on their premises.

Stanje: dober (rabljeno), Leto izdelave: 1979, TBT T30-4-750/1000 - Drilling diameter approx. 30 mm - Drilling depth 750 mm / extension approx. 1000 mm Godpfed Ri H Ejx Afqsbg - Tank - Pumps - Loading device - Tailstock

Stanje: rabljeno, Leto izdelave: 1985, Pressure 500 t Gbodpevut N Ajfx Afqeg Column gap 3100 mm Fixed stroke 300 mm Stroke rate 20 - 70 strokes/min Installation height (stroke + ram adjustment at top) 1000 mm Lateral column clearance 1400 mm Table area 2800 x 1600 mm Ram area 2800 x 1450 mm Drive power 90.0 kW Machine weight approx. 100.00 t Space requirement approx. 5.75 x 3.2 x 7.8 m Ram adjustment 100 mm Height above floor 6.4 mm Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly adjustable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment as is, without being put into operation, disassembled and stored (no control system or main motor included)

Stanje: novo, Leto izdelave: 2024, Hydraulic Press Brake PBO-3225-CNC OT-41 Technical Specifications - Rated Pressure: 2500 kN - Maximum Bending Length: 3200 mm - Throat Depth (Distance between Tool and Rear Wall): 400 mm - Maximum Stroke of Bending Beam: 250 mm - Maximum Opening Height: 535 mm - Distance between Frames: 2500 mm - Maximum Backgauge Distance: 600 mm - Motor Power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11,700.0 kg Tooling - Front Supports: 2 pcs. - Backgauge Distance Adjustment (X-axis): Servo Drive - Beam Adjustment (Y-axis): Servo Drive - Backgauge Finger Height Adjustment (R-axis): Manual - Punch Clamping System: AMADA-type Quick-Change CNC OT-41 Control The Otinus CNC control features a user-friendly and intuitive interface. The software automatically calculates the bending angle. The large color touchscreen remains easy to read from any angle. Manual Crowning (optional*) This parameter ensures the customer achieves a consistent bending angle along the entire workpiece length. Automatic Crowning (optional*) Enables automatic crowning supervision via the control unit, ensuring optimal crowning adjustment at all times. OCS - Oil Cooling System The oil cooling system guarantees the stability of machine parameters even during prolonged continuous operation. Professional Support We ensure constant communication with our customers. When purchasing a machine, we include an hourly package for professional support from Otinus technicians. Visit Us and Test Our Machines Participate in a live demonstration where a qualified Otinus technician will showcase the full functionality of the machine. You may provide technical drawings and sample material for testing. Scope of Delivery: A 2-day operator training and commissioning - Day 1 (up to 8 hours) – Commissioning and CNC control training. - Day 2 (up to 8 hours) – Independent operation of the machine under the supervision of our technician, including programming of specific parts if required. Telephone Support by a Specialist - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Gjdpfx Ash Rdvaofqobg Free rental of transport rollers and two jacks for easier machine installation at the customer’s site. Rollers and jacks are supplied upon advance request (at least 7 days before scheduled delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 6–8 weeks. Does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on their premises.

Stanje: dober (rabljeno), - Drilling diameter: 5–30 mm - Drilling depth: 750–900 mm - Conversion/modification to customer specifications Gbjdpfo Dcz Djx Afqjg

Stanje: novo, Leto izdelave: 2024, Hydraulic Press Brake PBO-3212-CNC OT-41 Technical Specifications - Nominal pressing force: 1250 kN - Maximum bending length: 3200 mm Godpfjgi Dk Dex Afqjbg - Throat depth (distance between tooling and back frame): 320 mm - Maximum ram stroke: 120 mm - Maximum open height: 390 mm - Distance between uprights: 2700 mm - Maximum backgauge travel: 600 mm - Motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tooling - Front sheet supports: 2 pcs. - Backgauge adjustment (X-axis): Servo drive - Ram adjustment (Y-axis): Servo drive - Backgauge finger height adjustment (R-axis): Manual - Punch clamping system: AMADA-type quick-release CNC OT-41 Control System The Otinus CNC controller features a user-friendly and intuitive interface. The software automatically calculates the bending angle. The large color touchscreen is easy to read from any position. Manual Crowning (optional*) This feature ensures consistent bending angle across the entire length of the workpiece. Automatic Crowning (optional*) Allows the control system to monitor and automatically adjust the crowning, ensuring optimal precision at all times. OCS - Oil Cooling System Oil cooling maintains stable machine parameters even during prolonged continuous operation. Expert Support We ensure constant communication with our customers. When purchasing a machine, you receive a support package with hours provided by Otinus technicians. Come and test our machines Participate in a live demonstration by a qualified Otinus technician showcasing all machine functionalities. You may provide technical drawings and sample materials if needed. Scope of delivery includes: A 2-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and control system training - Day 2 (up to 8 hours): independent work on the machine under technician supervision – programming of specific parts possible Telephone consultation with a specialist - from 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months Free rental of transport rollers and two lifting jacks to facilitate machine installation at the customer’s site. Rollers and jacks must be requested at least 7 days before machine delivery. Terms of cooperation - 24-month warranty period - Delivery time: approx. 6–8 weeks This does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and any on-site transportation.