Prečna Polica nakup rabljenega (667)

Stanje: dober (rabljeno), Leto izdelave: 1997, Paletni vvozni regal, Ohra, 850 kg/paleta, 2.470 paletnih mest, tudi za CP1 industrijske palete – rabljeno -: Cena na lokaciji: 44.500 € (neto), vključno z demontažo itd.! Proizvajalec: Ohra Tip: vvozni regalni sistem Leto izdelave: 1997 Nosilnost na paleto: 850 kg Širina kanala: cca 1,48 m Globina kanala: cca 8,56 m Višina: cca 11 m in 8,10 m cca 68 regalnih polj skupaj 247 kanalov 25 polj s 3 kanali 43 polj s 4 kanali Kapaciteta na kanal: 10 euro palet ali 7 CP1 industrijskih palet Skupna kapaciteta: 2.470 euro palet Stanje: dobro Na voljo: takoj Lokacija: Porenje-Pfalška Kdedox Tp Eispfx Af Tog

Stanje: dober (rabljeno), Approx. 250 post racks / storage racks / stacking racks, approx. 1.98 x 1.40 x 2.45 m – used – : Price per unit ex location: only €155 (net)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Load capacity: unknown Internal dimensions: 180 x 139 x 225 cm External dimensions: 198 x 140 x 245 cm Dead weight: approx. 150 kg Load capacity: approx. 500 kg (information without guarantee) Top load: approx. 1,000 kg (information without guarantee) Kdedpfxeu Himrs Af Tog Stackable: 3-high Base material: plastic Each unit consists of: • 2 removable side panels • 3-piece plastic base • Base profile • Reinforcement strut (3x red bars) Condition: good Available: immediately Location: 72379 Hechingen

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Kedek Abbbspfx Af Tsdg Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: zelo dobro (rabljeno), Kataloška številka 7837 TEHNIČNI PODATKI - maks. premer žaginega lista: 450 mm - premer vretena: 30 mm - zgornja pnevmatska pritrditev - zaščita za žagin list - zaščita žaginega lista služi tudi kot pritiskalo - pnevmatsko izvlečenje žaginega lista - višina reza: 125x125 mm, 100x250 mm - kapaciteta rezanja (debelina x širina): 50x530 mm, 100x480 mm, 150x380 mm, 200x200 mm - glavni motor: 5,6 kW - premer odsesovalnega priključka: 100 mm - dimenzije delovne mize (d/š): 660x480 mm - višina mize od tal - 2 kos valjčnih miz - dovodna valjčna miza z vodilom: 1500 mm - odvodna valjčna miza z vodilom + zapah: 1500 mm - širina drsnega valja: 300 mm - delovni tlak: 8 bar - skupne dimenzije stroja (brez valjčnih miz) d/š/v: 940x780x1150 mm - teža: cca 450 kg Kdedsx Arhcepfx Af Tjg PREDNOSTI – izdelano v Nemčiji – tehnična dokumentacija DTR – 2 valjčni mizi – pnevmatski pomik žaginega lista – rabljena žaga v vrhunskem stanju Neto cena: 14.900 PLN Neto cena: 3.550 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število predalov: 26, trajanje garancije: 12 meseci, EXTENDABLE RACK FOR STORAGE OF GLASS PANELS M80-26 YEAR OF MANUFACTURE: 2025 / BRAND NEW We are a manufacturer of extendable racks for storing glass panels (crates with glass) or other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are developed and manufactured from the ground up at our company in Poland. The materials we use for producing our racks are certified for durability and are subject to continuous quality control. The rack consists of extendable, slightly inclined drawers. The rack can save up to 75% of storage space as all compartments are built parallel to each other with only 10 millimeters of spacing between them. We offer rack versions with various dimensions and load capacities. After consultation, we can also manufacture a rack to different specifications, accommodating your individual needs and requirements. The inclination of the compartments depends on the installation and can be left or right. We particularly recommend the rack for glassworks, stone cutting shops, furniture manufacturers, and advertising workshops that wish to optimize their space efficiently. The racks are delivered as kits and are to be assembled by the customer. This is very easy; with our many years of experience, we have developed a well-thought-out product. Using the included assembly instructions, assembly is straightforward and hassle-free. Our technical department is always available for assistance. If you prefer our technician to supervise the installation, this can be arranged for an additional fee. TECHNICAL DATA FOR RACK M80-26 Application: for individual glass panels 255 cm x 160 cm Max. glass panel size: 275 cm x 170 cm Number of compartments: 26 Width of glass holding ledge: 8 cm Length of glass holding ledge: 308 cm Material the glass panels are placed on: Wooden board 308 cm x 8 cm x 2.5 cm Height of frame (A): 218 cm Width of frame (B): 384 cm Depth of frame (C): 317 cm Required space for correct use: 23 m² Floor requirements: smooth/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: ball bearing steel wheel / profile-rolled Color: RAL 7040 (grey) Corrosion protection: Steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Kodpfsf S Hh Tex Af Tsdg Permissible total load: 23,400 kg Compartment inclination: to the left or right, depending on installation Assembly time: 7 hours Number of persons required for assembly: 2 DOCUMENTS SUPPLIED WITH THE M80-26 RACK - User manual - Assembly instructions - Data plate - Warranty: 12 months The product is delivered fully ready for operation. Our company supplies storage racks for glass panels within the EU and to other countries.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število predalov: 30, trajanje garancije: 12 meseci, Our company (EXPOGLASS®) manufactures machinery and glass racks for the glass industry. Our portfolio includes an extendable glass rack 321 x 255. New product available on request. Technical data: - Number of drawers: 30 - Pane size: 2550 x 3210 mm for storage Kdedpfxjh Uudvj Af Tsg - Load capacity per drawer: 1500 kg - Loading surface width: 80 mm - Total rack width: 4460 mm - Orientation (drawer tilt side): universal (depends on installation) - Number of positioning rollers per drawer: 8, with bearings - Design: modular (combinable) - Front roller material: floor-friendly polyamide Rear drawer roller: steel – turned, with bearing, double-flanged, runs on steel rail We export our products worldwide.

Stanje: dober (rabljeno), Leto izdelave: 1982, Krožilna in kotna žaga, vlečna žaga, kap žaga, panelna žaga, kap in kotna žaga, radialna žaga, krožna žaga za dolžinsko kapiranje in kotiranje, radialna ročna žaga -Proizvajalec: Graule Krožilna in kotna žaga tip ZS135 -Moč motorja: 2,2 kW -Hitrost vrtenja: vrt./min -Žagin list: Ø 420 mm, z možnostjo nagiba -Območje reza: 90° ravno 375 x V170 mm -Območje reza: 45° 260 x 170 mm / 365 x 120 mm Kdodpfxjyam Uas Af Teg -Transportne mere: 1060/835/V1530 mm -Teža: 185 kg

Stanje: dober (rabljeno), Sturdy workshop shelving unit Height: 2550 mm Width: 2740 mm Depth: 800 mm with wooden shelves Kodpef Tx U Sofx Af Todg

Stanje: rabljeno, Leto izdelave: 1973, z levo stransko krožno žago, nagibno do 45°, velikost reza 2200 x 2500 mm, 3 motorji po 4,5 kW, obe odrezni žagi nagibni 45°–90°, vsak z lastnim motorjem za predrezovanje. Vse 3 žage do premera 400 mm, najmanjša širina reza 210 mm. Obe predrezni žagi pnevmatsko vodeni naprej in nazaj, z vakuumskimi prisesalki za fiksiranje plošč. Lokacija skladišča: Nattheim. Kdodpfx Ajvvkm Isf Tog

Stanje: zelo dobro (rabljeno), Kataloška številka 7866 Kdsdsx U Tymepfx Af Tsg TEHNIČNI PODATKI - maks. premer žaginega lista: 300 mm - premer odprtine lista: 30 mm - zaščita za list - višina reza pri nameščenem listu: 250 mm, 60 mm - maks. širina reza: 600 mm - možnost rezanja pod kotom v navpični ravnini – pomik roke ali pomik lista - možnost vrtenja roke desno/levo - motor: 3 kW - dimenzije mize: 1130 x 1010 mm - premer izvlečne cevi: 50 mm - mere d/š/v: 1150 x 1190 x 1510 mm - teža: 220 kg PREDNOSTI – italijanska izdelava – neničkana – DTR dokumentacija – zelo dobro stanje – rabljena žaga Neto cena: 6500 PLN Neto cena: 1550 EUR glede na tečaj 4,2 EUR (Cene se lahko ob večjih nihanjih spremenijo)

Stanje: rabljeno, Stow traversa – rabljena. Traversa znamke STOW, dolžine 270 cm, oranžne barve, je konstrukcijski element skladiščnih regalov, ki prenaša obremenitev. Prečka oranžne barve, prečnega prereza 12,5×5 cm. Vsaka traversa je na koncih opremljena s pritrdilnimi kavlji, ki omogočajo klinasto pritrditev v perforacijo stebra okvirja. Zaradi visoke togosti priključka traverza-stebro je zagotovljena vzdolžna stabilnost regalov. Največja obremenitev na par traverz znaša 3000 kg. Z naraščajočo obremenitvijo se povečuje tudi togost spoja traverza-stebro. Ponudba se nanaša na novo traverso znamke STOW (PNB0485 / 1.5): Šifra izdelka: MTP006837 Dolžina traverze: 270 cm Prerez traverze: 12,5 x 5 cm Največja obremenitev: 3000 kg Prečka: oranžna Kodpfxjv Uzz To Af Tedg Cena brez DDV: 15 evrov/kos * Na zalogi velike količine. * Možna dostava po vsej Evropi. Lokacija: Chmielów/Tarnobrzeg, Poljska

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7680 TEHNIČNI PODATKI - maks. premer žaginega lista: 500 mm - premer vretena: 30 mm - hidravlični hod žaginega lista - maks. širina reza: 500 mm - maks. višina reza (na sredini, z listom 500 mm): 160 mm - glavni motor: 4 kW - dimenzije mize: 715 x 1070 mm Kodswtqbfspfx Af Todg - višina mize od tal: 790 mm - valjčne mize: 2 kosa - dimenzije miz: - podajalna dolžina/širina: 2000 x 640 mm - odvzemna dolžina/širina: 2000 x 640 mm - dimenzije stroja dolžina/širina/višina: 1400 x 940 x 1070 mm - skupna teža: 480 kg PREDNOSTI – 2 valjčni mizi – hidravlični hod žaginega lista – rabljena žaga, v zelo dobrem stanju Neto cena: 15.900 PLN Neto cena: 3.780 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Material clamping: pneumatic - Saw blade stroke: pneumatic - Maximum cutting width: 800 mm - Maximum cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from floor: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table equipped with a guide rail - Roller length: 530 mm - 6 powered rollers (1.5 kW) Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller length: 590 mm - 11 idle rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm Total weight: 1500 kg ADVANTAGES – 2 roller tables – Italian-made – Pneumatic controls Ksdpfew Edigex Af Tsdg – Pneumatic saw blade stroke with adjustable feed speed via dial – Used saw, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (calculated at 4.2 PLN/EUR) (Prices may vary with significant exchange rate fluctuations)

Stanje: dober (rabljeno), Brez okvirjev, samo prečke: Prečke 3600*110 mm 467 kos 22 EUR Prečke 3600*120 mm 432 kos 23 EUR Prečke 3600*130 mm 20 kos 24 EUR Prečke 3600*150 mm 8 kos 25 EUR Vse prečke skupaj: 18.540 EUR Kdodpfx Aspu Acfjf Tog Če potrebujete regal ali opremo v drugi sestavi ali izvedbi, nas prosimo kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema po želji, na primer: Zaščita okvirjev, vogalov in naleta, zaščite proti prebijanju, iverne plošče, rešetke, mreže za hrbtno stran, globinske palice na voljo. Dostava: Za informacijo o stroških prevoza navedite svojo poštno številko in lokacijo ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do predhodne prodaje!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe storage. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations that require robust and durable shelving for storing Euro pallets. The proven PR600 construction provides high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: tested brand quality at an especially attractive price—immediately available for new builds, conversions, or extensions of your existing racking system. Customizable: The rack frames (Type P120) can be modified to your desired height—precisely and professionally in our workshop. We supply tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 985 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load capacity: 3000 / 3500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 165 incl. floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately from stock, multiple sets available SCOPE OF DELIVERY: 12 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled 88 × beams approx. 270 cm (INP100 or CE110) 176 × locking pins Price: €3,744.00 net €4,455.36 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carriers—freight costs depend on postcode. - Professional assembly and disassembly by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to prepare a non-binding offer individually tailored to your requirements. Whether new build, conversion, or extension—we provide expert advice on your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can experience our pallet racking, shelving, and other solutions first hand. Many systems are set up and ready for demonstration. Our experts are available to answer your questions and provide individual advice—we look forward to your visit! Didn't find the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ We are available Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible. Kdedpjybavmofx Af Tjg

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 650 cm, compartment load: 3000 kg, pallet racking, heavy-duty racks, high-bay racks, industrial shelving, immediately available from stock Specifications: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3000 kg per compartment - Frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - Brand new BLT / PR65 - Manufactured in Europe & tested according to the latest DIN EN 15512 standard - 100% quality at the best price Rack consists of: - 06 x frames approx. 650 cm x 110 cm, disassembled - 30 x beams approx. 270 x 14 x 5 cm, T30 - 60 x locking pins - Levels: floor + 3 - 60 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,400.00 net plus statutory VAT You will receive an invoice with VAT shown separately. Kdjdpjybau Njfx Af Tjg Frame pre-assembly is available by us for a small surcharge of €12.50 net per piece. Transport: Delivery upon request by our partner forwarder, cost depends on postal code. Installation: Our trained staff are available to assist you with the professional assembly and disassembly of your warehouse equipment as required. Our recommendation: Let us know your requirements ... We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2022, approx. 100.16 running meters, H: 450 cm, shelf load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks available immediately from stock Details: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 running meters - Load capacity: 3,000 kg per shelf level - Upright frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR45 - Manufactured in Europe and tested according to the current DIN EN 15512 standard - 100% quality at the best price Ksdpfx Afoybau Aj Tjdg Rack configuration: - 37 x Upright frames approx. 450 x 110 cm, disassembled - 144 x Beams approx. 270 x 14 x 5 cm, T30 - 288 x Locking pins - Levels: floor + 2 - 324 pallet spaces including floor level — IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES — Price: €10,900 net plus legally applicable VAT You will receive an invoice with VAT shown separately Frame pre-assembly can be carried out by us for a small additional charge of €12.50/net per piece Transport: Delivery available on request via our partner freight forwarder – costs depend on postal code Assembly: Our qualified personnel are available to assist you with the professional installation and dismantling of your warehouse equipment Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The used Stow pallet racking system is a top-quality heavy-duty rack designed for industrial storage – with approx. 33.30 m running length and 7 m height. Ideal for logistics centers, warehouses, and craft businesses that require maximum storage capacity on a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for companies with high goods turnover. Customizable dimensions: The uprights can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage requirements. PRODUCT DETAILS: Kjdjybaupepfx Af Tjdg - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 3330 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange powder-coated) - Uprights: 700 x 110 cm, RAL5015 (blue powder-coated), pre-assembled - Levels: floor + 3 - Pallet positions: 144 including floor level - Version: Used Stow racking system SCOPE OF DELIVERY: - 010 x uprights (approx. 700 x 110 cm), pre-assembled - 054 x beams (approx. 360 x 14.5 x 5 cm) - 108 x safety pins Price: EUR 3,452.00 net EUR 4,107.88 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner shipping companies – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding quote for you – tailored to your specific requirements. Whether you need a new build, conversion or extension – we provide expert consultation for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, warehouse shelving, and other solutions. Many systems are assembled and ready for direct inspection. Our technical consultants are happy to answer your questions and offer individual advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 linear metres, H: 650 cm, compartment load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks available immediately from stock Specifications: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3,000 kg per shelf level - Uprights galvanised - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - Brand new BLT / PR65 - Manufactured in Europe and tested according to the current DIN EN 15512 standard - 100% quality at the best price Racking system comprises: - 37 x uprights approx. 650 x 110 cm, disassembled - 216 x beams approx. 270 x 14 x 5 cm, T30 - 432 x safety pins - Levels: floor + 3 - 432 pallet spaces incl. floor locations -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: 16,000.00 € net plus statutory VAT Kdsdsybauiepfx Af Teg An invoice with VAT shown separately will be issued Frame pre-assembly can be carried out by us for a small surcharge of €12.50 net per unit Transport: Delivery can be arranged on request by our partner forwarding agent; costs are postcode-dependent Installation: Our trained staff are available to assist you with professional installation and dismantling of your warehouse equipment where required Our recommendation: Let us know your requirements… We are happy to assist you with the realisation of your projects, from planning and ordering to installation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Dexion P90 pallet racking system consists of a combination of new and used components: The upright frames are brand new, while the beams are from thoroughly inspected used stock. This system is ideal for industrial storage—with a total rack length of approx. 30.80 m and a height of 6.5 m. Whether for warehouses, logistics centers, or workshops, this heavy-duty rack ensures maximum stability and space-saving storage capacity. Immediately available from stock—perfect for businesses with high inventory turnover and specific needs. Customizable to your requirements: The uprights can be precisely adapted to your desired height—professionally adjusted in our workshop. Contact us—we offer tailored solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 3000 kg - Beams: 270 x 10 x 5 cm (used) - Beam colour: galvanised - Uprights: 650 x 110 cm, galvanised, pre-assembled (new) - Levels: floor + 3 - Pallet spaces: 132 including floor spaces Kjdpfxoybat Es Af Tjdg - Version: combination of new and used components DELIVERY SCOPE: - 12 x uprights (approx. 650 x 110 cm), pre-assembled (new) - 66 x beams (approx. 270 x 10 x 5 cm) (used) - 132 x safety pins Price: €3,360.00 net €3,998.40 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier—freight costs depend on postcode - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customised quote based on your requirements. Whether for new construction, modification, or expansion projects—we support you with expert advice on configuring your racking systems. SHOWROOM: Feel free to visit our showroom! See our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled and on display. Our expert advisors are available for your questions and to provide individual consultation—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 a.m. to 4:00 p.m. Alternatively, send us a message with your name and phone number, and we’ll get back to you as soon as possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Dexion P90 pallet racking system consists of a combination of new and used components: The upright frames are brand new, while the beams are from thoroughly inspected used stock. This system is ideal for industrial storage—with a total rack length of approx. 30.80 m and a height of 6.5 m. Whether for warehouses, logistics centers, or workshops, this heavy-duty rack ensures maximum stability and space-saving storage capacity. Immediately available from stock—perfect for businesses with high inventory turnover and specific needs. Customizable to your requirements: The uprights can be precisely adapted to your desired height—professionally adjusted in our workshop. Contact us—we offer tailored solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 3000 kg - Beams: 270 x 10 x 5 cm (used) - Beam colour: galvanised - Uprights: 650 x 110 cm, galvanised, pre-assembled (new) - Levels: floor + 3 - Pallet spaces: 132 including floor spaces - Version: combination of new and used components DELIVERY SCOPE: - 12 x uprights (approx. 650 x 110 cm), pre-assembled (new) - 66 x beams (approx. 270 x 10 x 5 cm) (used) - 132 x safety pins Price: €3,360.00 net Kdedpoybatxofx Af Tsg €3,998.40 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier—freight costs depend on postcode - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customised quote based on your requirements. Whether for new construction, modification, or expansion projects—we support you with expert advice on configuring your racking systems. SHOWROOM: Feel free to visit our showroom! See our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled and on display. Our expert advisors are available for your questions and to provide individual consultation—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 a.m. to 4:00 p.m. Alternatively, send us a message with your name and phone number, and we’ll get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 550 cm, Bay load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, immediate availability from stock Data: - Height: approx. 550 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3,000 kg per bay - Uprights galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - New product BLT / PR55 - Manufactured in Europe & tested in accordance with the latest DIN EN 15512 standard. - 100% quality at the best price. Rack consists of: - 06 x Uprights approx. 550 cm x 110 cm, disassembled - 30 x Beams approx. 270 x 14 x 5 cm, T30 - 60 x Safety pins - Levels: Floor + 3 - 60 pallet spaces incl. floor positions -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2,220.00 net plus applicable VAT You will receive an invoice showing the VAT. Frame pre-assembly can be carried out by us for a small surcharge of €12.50/net per unit. Transport: Delivery can be arranged by our partner freight company upon request; costs depend on the postal code. Assembly: Ksdpfx Aeybatref Todg Our trained personnel are available to assist with professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning to ordering to assembly.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 linear meters, H: 250 cm, shelf load: 3,000 kg, pallet racks, heavy-duty racks, high racks, industrial shelving, racks available immediately from stock. Specifications: - Height: approx. 250 cm Kodpfxjybatls Af Todg - Depth: approx. 110 cm - Length: approx. 100.16 linear meters - Shelf load: 3,000 kg - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams painted orange - Brand new BLT / PR25 - Manufactured in Europe & tested according to current standard DIN EN 15512. - 100% quality at the best price. Rack consists of: - 37 x uprights approx. 250 cm x 110 cm, disassembled - 144 x beams approx. 270 x 14 x 5 cm, T30 - 288 x locking pins - Levels: floor + 2 - 324 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,690.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Frame pre-assembly can be carried out by us for a small additional charge of €12.50 net per unit. Transport: Delivery can be arranged via our partner forwarding company if desired; costs depend on postal code. Assembly: Our trained staff are happy to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering to final installation.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 running meters, H: 550 cm, shelf load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks immediately available from stock Specifications: - Height: approx. 550 cm - Depth: approx. 110 cm - Length: approx. 100.16 running meters - Load capacity: 3,000 kg per shelf compartment - Uprights galvanized - Beams 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR55 products - Manufactured in Europe & tested according to current DIN EN 15512 standard - 100% quality at the best price Shelving includes: - 037 x uprights approx. 550 cm x 110 cm, disassembled - 216 x beams approx. 270 x 14 x 5 cm, T30 - 432 x safety pins - Levels: floor + 3 - 432 pallet spaces incl. ground level locations Kjdpsybar Iefx Af Tjdg -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €14,930.00 net plus statutory VAT You will receive an invoice with VAT shown. Pre-assembly of the frames can be carried out by us for a small surcharge of €12.50/net per piece. Transport: Delivery can be arranged by our partner forwarding company upon request; costs are dependent on postcode. Assembly: Our trained personnel are available to assist you with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering through to installation.

Stanje: novo, Approx. 8.4 linear meters, Height: 500 cm, Compartment load: 4,500 kg, pallet racks, heavy-duty racking, high-bay racking, industrial racking, racks immediately available from stock Technical data: - Height: approx. 500 cm - Depth: approx. 110 cm - Length: approx. 8.4 linear meters - Load capacity: 4,500 kg per compartment - Uprights galvanized - Beams: 270 x 15 x 5 cm, T45 - Beams in orange - New BLT PR50/101 - Manufactured in Europe & tested to current DIN EN 15512 standard - 100% quality at the best price Racking system consists of: - 04 x uprights approx. 500 cm x 110 cm, disassembled - 18 x beams approx. 270 x 15 x 5 cm, T45 - 36 x safety pins - Levels: floor + 3 - 36 pallet spaces incl. floor IMMEDIATELY AVAILABLE IN MULTIPLE UNITS Kodpfx Afoybarue Tedg Price: €1,840.00 net plus applicable VAT You will receive an invoice with VAT shown separately. Assembly of frames can be carried out by us for a small additional charge of €12.50 net per unit.