Dvojna žaga, prečna žaga OMS 11/26

OMS 11/26

Stanje: dober (rabljeno), Koda: 0323 Blagovna znamka: SML - ITALIJA Model: SILVER P 35/EL - CE standard Elektronska dvoglava kotna žaga za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov – CE standard. Tehnični podatki: - Olio-pnevmatsko spuščanje žagine glave - Največja dolžina reza: 5200 mm - Najmanjša dolžina reza: 50 mm - Višina reza: 100 mm - Največja širina reza: 170 mm Dsdpfjtu Hy Esx Altsuw - Premer žaginega lista: 350 mm, izvrtina 30 mm - Motor: 3 KM vsak, 3000 vrt/min - Elektronski programator za pozicioniranje žagine glave - Bimanualni nadzor spuščanja žaginega lista - Pnevmatska pritrditev obdelovanca - 2 odsesovalna priključka, premer 60 mm - Obratovalni tlak: 7 bar - Skupne dimenzije (DxŠxV): 6300 x 1000 x 1600 mm - Teža: 1100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Duodsmhhl Hepfx Altsw Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: dober (rabljeno), Koda: 0228 Znamka: OMS SALVARANI Model: 300 INVINCIBILE Pnevmatski dvoglavi prečni rezalni stroj za rezanje lesa, okvirov, stavbnega pohištva, pohištva in različnih drugih materialov Tehnični podatki: Delovna dolžina: 3000 mm Premer rezila: 300 mm Moč motorja: 2,5 KM - 3000 o/min Ročno pomikanje obeh glav Rezanje od 0 do 45° desno in levo Pnevmatska stopalka za spuščanje glav 2 pnevmatski vpenjali za pritrditev obdelovancev 2 odsavna nastavka Ø 50 mm Stisnjen zrak: 6 bar Dedpfxsxnxume Altouw Skupne dimenzije: 4000 x 700 x 1250 mm (višina) Teža: 520 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Samodejna dvojnadžična žaga model OMS SALVARANI INVINCIBILE OK 330 rabljen stroj delovno stanje: dobro za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov dol spodnji hod žagine skupine z oljno pnevmatiko nagib žagine skupine +/- 45° število motorjev: 2, moč posameznega 3 KM premer žaginega lista: 330 mm maksimalna uporabna dolžina reza: 3000 mm minimalna uporabna dolžina reza: 350 mm maksimalna širina reza pri 90°: 165 x 115 mm (V) Dujdjwqdqnspfx Altjw maksimalna širina reza pri 45°: 115 x 115 mm (V) teža: 600 kg napetost: 380/50

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) Dsdpfjmhhx Ijx Altsuw - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, I am selling the four-side planer Futura P-MAX 23/5+UNIV, year of manufacture 2008. Demonstration machine, has had very little use! Dodpfx Aehcfizoltjuw 6 spindles: bottom – right – left – top – bottom – universal Electronic programming for working width, working height, and feed speed. Max. element size: 230x170mm! All 6 spindles: 6000 rpm. Material pressure system for short workpieces. Total weight: 2,500 kg. 1-zone pneumatic workpiece pressure system for feed. Fully operational. Available immediately. Demonstration machine, with very little working time!

Stanje: dober (rabljeno), Koda: 0246 Blagovna znamka: OMGA Model: TR 2B - NC - CE standard Avtomatska dvoglava kotna žaga z numerično krmiljenim pozicionerjem za rezanje okvirjev, lesenih profilov, pohištva, lesenih okenskih okvirjev, vrat, plastičnih materialov in raznih – CE standard. Tehnični podatki: Numerično krmiljen pozicioner: omogoča shranjevanje rezalnih seznamov in samodejno pozicioniranje pomične glave Dolžina reza 3500 mm Premer lista 350 F 30 mm Motorji vsak po 2,2 kW Obrati 3000 Širina reza 170 mm Višina reza pri 90° 102 mm Duodpfx Ajxztydsltew Št. 2 vertikalni pnevmatski pritiskači Premer odsesne cevi 80 mm Stisnjen zrak 6-7 bar Skupne dimenzije mm 4400 x 1000 x 1500 v Teža kg 600

Stanje: zelo dobro (rabljeno), Model: DGS 180 Saw angle adjustable in two planes (vertical and horizontal) Dujdpfx Asgh Hl Ejltow Very good condition.

Stanje: rabljeno, Leto izdelave: 2000, BACCI TWIN CNC MACHINING CENTER – CE COMPLIANT – USED COMPLETE WITH: - X-Axis working area: 3400 mm - Y-Axis working area: 1800 mm - Z-Axis working area: 1250 mm - Unlimited B-Axis - C-Axis: 400° Djdpfx Aowrc Tdsltjuw - Type 4 heads (7.5 kW each) - Max spindle speed: 24,000 rpm - No. 2 variable geometry TGV tables - Vacuum pump - Enclosure/cabin - OSAI control system - Yaskawa drives - Four-sided plus roof enclosure - Year: 2000 - CE Certification

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: M275603, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.200 mm, Emmegi, Twin Electra Sun TU/6 CNC dvo-glava kotna žaga. Dolžina reza: 6200 mm. Rezilo: 500 mm. Dusdpexrg R Rsfx Altow