Povlecite Tiska nakup rabljenega (4.353)

Leto izdelave: 1999, stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Codpfxod Ew Tbe Afnspw Working area: 2330 x 780 mm. Inspection possible. Complete documentation included.

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Cpedpodxvfpsfx Afnsw Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Stanje: kot nova (razstavni stroj), - Press force: 700 kN - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit Cjdpfewaznox Afnepw up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Price on request!

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Cpjdpfx Afjfhqhdjnsw Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Leto izdelave: 1979, stanje: rabljeno, številka stroja/vozila: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Passage hole in table: 100 mm Ram bore: 40 mm Ram advance speed: 350 mm/s Cpjdpfx Aob Hk Dzefnsw Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t

Leto izdelave: 1991, stanje: rabljeno, številka stroja/vozila: K2940, Pressing force: 150 t Working width: 4300 mm Clear distance between uprights: 3600 mm Throat depth: 300 mm Max. installation height: approx. 500/700 mm Cpjdpfx Ae Dnf Uofnow Working speed: up/down 41–65/10 mm/sec Backgauge: 1000 mm Electrical connection: 400 V, approx. 15 kVA kW Weight: 14 t Space requirements: 4600 x 1950 x 3100 mm

Leto izdelave: 1990, stanje: rabljeno, Pressing force: 250 t Working width: 3550 mm Clear distance between uprights: 3050 mm Throat depth: 300 mm Cpedpfs Dqaqox Afnew Backgauge: yes, mm Electrical connection: 400 V, approx. 26 kW Weight: 20 t Required space: 2100 x 3800 x 3100 mm

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Cedpfocna Hfsx Afnspw Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 207320; Lg-Nr. 09361, Technical Data: - Max. working length: 1250 mm - Distance between uprights: 1050 mm - Max. pressing force: 80 t - Stroke: 250 mm - Throat depth: 300 mm - Max. installation height between table and ram: 560 mm - Stroke speeds: - Downward idle speed max: 100 mm/sec - Upward speed: 100 mm/sec - Downward pressing speed max: 12 mm/sec - Total drive power: 15 kW - Space requirement approx.: W 1750 x H 3400 x D 2000 mm - Weight: approx. 8500 kg - Equipped with: - CNC control CYBELEC DNC 7400 PSGY - CNC-controlled X-axis back gauge: 5 – 1000 mm - Z-axis adjustable in three stages, pneumatically height-adjustable - Manually movable and foldable back gauge fingers - CNC-controlled pneumatic die shifting Cedpfxsb Rk Ekj Afnspw - Hydraulic tool clamping - Manual crowning - 2 support arms - Divided punch tool H 320 x L 1000 mm - Goose neck die H 320 mm x L 1000 mm - Universal die L 1000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna masa: 32.000 kg, širina mize: 1.500 mm, dolžina mize: 2.500 mm, stiskalna sila: 407 t, vrsta upravljanja: CNC krmiljenje, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Ponudba velja kot zaveza za prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Csdpfoxm R S Ijx Afnepw Širina mize: 1.500 mm Dolžina mize: 2.500 mm Hidravlični tlak: 320 bar Nazivna sila: 2 x 2.000 kN PODATKI O STROJU Električni podatki Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Priključek: 42 kW Nazivni tok: 100 A Dimenzije in teža Dimenzije: 5.000 x 4.000 x 3.800 mm Teža: 32.000 kg OPREMA CNC krmiljenje Hladilna naprava Filtrirna odsesava HILMA izhod konzol (1.600 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Cedpfx Afsdvb Tfsnepw Height: 2,900 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Cpjdpfjgfvnnsx Afnjw Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control system Feed with gripper

Leto izdelave: 1983, stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Installation height: 370 mm Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feeder for material 300x3 mm Cpodpjctl Dtefx Afnow Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Attention – Do not buy used metallography equipment! Anyone familiar with metallography knows: “used” unfortunately means “worn out” in this context. Unless these devices are cleaned thoroughly on a daily basis, the high operational load will turn them into total losses within a few years. The ECOPRESS 102 is an automatic hot mounting press featuring an electrohydraulic pressure system—so it does not require a separate compressed air connection. The system operates with a working pressure up to 300 bar and an embedding temperature up to 200°C. Embedding time is freely programmable up to 60 minutes. Thanks to its fully automatic program cycle and integrated automatic cooling system, fast cycle times are ensured: Thermostatically controlled heating and cooling cycles, 1650 W heating output, automatic cooling process. The ECOPRESS 102 is supplied with a single press cylinder and piston (optional intermediate piston for two samples) available in diameters of 25 / 30 / 40 / 50 mm (and inch sizes). The EXOPRESS 202 offers two mounting cylinders. Completion of the embedding process is signaled acoustically by the machine. Delivery is ready for operation (including the embedding cylinder, piston, and optional intermediate piston for two samples as required for your application). Necessary connections: 230V / 50 Hz, 1 phase (220V), water supply and drain. Csdocwamxepfx Afnspw * 1650-watt heating output * Up to 200°C embedding temperature * Embedding time adjustable up to 60 minutes * Automatic cooling sequence * No compressed air required * 12-month warranty Delivery includes a starter/test kit of consumables comprising: * 5 x 1 kg (5 kg total) various mounting resins * Release agent (400 ml) Delivery by freight carrier, free to Germany (ex works) (Optional: On-site installation by our technicians)

Leto izdelave: 2007, stanje: skoraj kot novo (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP PERFECTING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET CHANGE, AUTOMATIC WASHING SYSTEM. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL MIXING AND PH CONTROL. AUTOMATIC COUNTERS. INCLUDES WASH-UP ROLL REWINDER. PAPER PALLET ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSION COUNT: 4,600,000 Cjdpstvmrbjfx Afnspw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP REVERSING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET WASHING, AUTOMATIC WASH-UP. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL PH MIXING. AUTOMATIC COUNTERS. INCLUDES WASH CLOTH REWINDER WITH THE MACHINE. PILING ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSIONS: 4,600,000 Cpodetvmq Nepfx Afnsw

Stanje: rabljeno, HYDRAULISCHE PRESSE SMG PRESSKRAFT: 300 t HUBLÄNGE: 700 mm Codpfjtndu Uox Afnepw LEISTUNG: 30 kW TISCHOBENMAßE: 1500 (1600) x 1300 mm TISCHUNTENMAßE: 1500 (1600) x 1300 mm ZIEHKISSEN: 100 t HUBLÄNGE ZIEHKISSEN: 280 mm GEWICHT: 28.000 kg VOLLSTÄNDIG GENERALÜBERHOLT – WIE NEU ALLE KOMPONENTEN ERNEUERT (DICHTUNGEN, PUMPEN usw.)

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Dimenzije spodnje mize: 700x700 mm Dimenzije zgornje mize: 600x600 mm Dolžina hoda: 600 mm Svetla višina: 800 mm Blazina: 20t Codpfx Ajw Slnisfnspw

Stanje: novo, Gesamthöhe 1500 mm Gesamtlänge 3000 mm 5 pneumatische Zylinder Druckluftdruck 8 bar Hub der pneumatischen Zylinder 100 mm Codsdpbn Aepfx Afnspw Durchmesser der pneumatischen Zylinder 100 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, TAULER PRINTLAM 52 Digital, letnik 2007, enostranski termalni plastifikator Maksimalna velikost pol: 550 x 740 mm Minimalna velikost pol: 200 x 250 mm Maksimalna hitrost: 35 m/min (4000 pol/uro) Primerna gramatura papirja: 130 – 450 g/m² Električne specifikacije: 380-415V, 3-fazni tok, 50 Hz, 9 kW Dimenzije: 2,75 m (dolžina) x 1,25 m (širina) x 1,7 m (višina) – Tokovno podajanje – Avtomatski podajalnik pol – Pnevmatski pritiskalni valj Codpfoulgx Ijx Afnspw – Avtomatski ločevalnik pol s spustno odlagalno mizico – Upravljanje preko zaslona na dotik

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Tool tryout press 150 t Clearance: 1000 mm Stroke: 600 mm Ram plate: 1500 mm x 1000 mm Table surface: 1500 mm x 1000 mm Front light curtain Siemens control Cedpfskw Rbajx Afnepw Weight: 12.5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena Cpsdoxfg Sbjpfx Afnsw 12 m dolžine Vse brezhibno V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Flexographic Printing Machine FlexiCOLOR 1700/1400 (2 colors), Cooper system – year 2013 – Excellent condition, preserved Price: 6,000 EUR Location: Ostrava, Czech Republic Year of manufacture: 2013 Condition: Used (briefly in operation), long-term preserved – wrapped in anti-corrosion foil and stored in a crate Description For sale: Flexographic printing machine FlexiCOLOR 1700/1400 (2 colors), designed for printing on sheet materials, particularly plywood and cardboard. The machine was used only for a short period, then decommissioned, preserved, wrapped in anti-corrosion foil, and stored in a shipping crate – ideal for secure transport and storage. The machine is equipped with the Cooper system (quick cliché change and precise registration) and stepless speed control via frequency inverter. Operates with water-based inks (ink tray + two-roller system, easy draining and cleaning). Main advantages - Briefly used, then unused and preserved (anti-corrosion foil + crate) - 2 colors, suitable for standard marking/printing on plywood and board materials - Cooper system – quick cliché change, stable print registration - Frequency inverter – stepless speed adjustment Cpjdpfoyghzhsx Afnsw - Water-based inks – easy operation and maintenance Possible to print on irregular shapes (independent feeder adjustment / guide chains) Technical data Model: FlexiCOLOR 1700/1400 Number of colors: 2 Max. print material width: 1700 mm Print cylinder width: 1400 mm Cylinder circumference: 905 mm Max. speed: up to 1,800 pcs/h Motor power: 0.75 kW Dimensions (L × W × H): 3700 × 1850 × 1100 mm Weight: 540 kg Use: printing on thick sheets, up to approx. 30 mm Delivery / Inspection The machine is available in Ostrava. Delivery includes protective packaging (anti-corrosion foil) and crate.

Stanje: rabljeno, Ta ponudba je za Thermo Labsystems Multiskan Ascent čitalnik mikroplošč. Thermo Labsystems Multiskan Ascent je napreden, kompakten, enokanalni fotometer s filtrom in navpično potjo svetlobe, zasnovan za izvajanje standardnih fotometričnih meritev. Vrste meritev vključujejo končno točko, dvotočkovne in kinetične meritve. Zaradi inovativnega optičnega sistema Multiskan Ascent lahko naprava odčitava 96- in 384-jamčne mikroplošče in je linearna do 4,0A. Naprava omogoča hitro odčitavanje mikroplošč. Cpedpfx Ajxzhctsfnjw