Porabo Zraka nakup rabljenega (2.489)

Stanje: dober (rabljeno), Reznor UDSA Gas Warm Air Heater Gas heater type: UDSA050-4E Appliance category: BSP-C12-C32-C52-C62 Designation: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. nominal heat input (Hs) QN: 58.60 kW Max. nominal heat input (Hi) QN: 52.80 kW Min. nominal heat input (Hs) QN: Min. nominal heat input (Hi) QN: Djdpfx Adswb Axrs Aeup Max. nominal heat output: 48.58 kW Min. nominal heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 5,180 m³/h Protection class: IP20 Pin No. 0461BN0677 UDSA Gas Warm Air Heater – Efficient Right Up to Peak Loads The most well-known unit from REZNOR is the UDSA gas warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculation heater is available in 14 performance ratings from 7 to 97 kW and consists of a heat exchanger, gas burner, and flue gas fan. The combustion air can be supplied either from outside as standard or from the exhibition room. The UDSA warm air heater from REZNOR guarantees uniform heat distribution throughout the heated hall. Its patented heat exchanger sets new standards in terms of airflow dynamics and heat transfer, achieving an efficiency of over 92 percent. UDSA: Compact, Revolutionary, and Forward-Looking. With this product generation, halls can be heated particularly efficiently — that is, directly without a central heating system — using decentralised, modulating gas warm air units. REZNOR UDSA Gas Warm Air Heaters – The Advantages: • Efficiency greater than 92% • Suitable for vertical installation • Low NOx emissions • Innovative combustion concept • Quiet operation • CE system certification, versions B or C • Compact construction for easy installation • Even heat distribution • Vertical and horizontal air deflection louvres as standard • Modulation of heating output down to 50% • EC technology • ErP Ready These units are directly heated gas warm air heaters (WLE) with fan-assisted atmospheric multi-gas burners. The installation, gas, and flue connection of the gas warm air heater must only be carried out by an authorized installation company. The gas warm air heaters are suitable for: - Operation with natural gas or LPG - Recirculation mode - Inlet temperatures below 5°C with stainless steel heat exchanger* - One-stage or two-stage* heating mode, controlled via room thermostat and control switch heating - Ventilation° via ECOtronic TN-L° with day-night-week program - Flue gas discharge through the roof, version B or C° - Flue gas discharge through the external wall, version C° Financing through our partner bank is available. complete-concept.leasingo.de Further products – new and used – can be found in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Reznor UDSA Gas Warm Air Heater Djdpfx Adswb A His Aeup UDSA Gas Warm Air Heater – Efficiency at the Highest Level The most recognized unit from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. The easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from outdoors as standard, or from the installation space. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in airflow dynamics and heat transfer, delivering an efficiency level above 92%. UDSA: compact, revolutionary, and trendsetting. This latest generation unit enables particularly cost-effective direct heating of halls – that is, without a central heating system – using decentralised, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. The Benefits: - Efficiency greater than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, versions B and C - Compact design for easy installation - Uniform heat distribution - Standard vertical and horizontal air guide vanes - Modulation of heating output up to 50% - EC technology - ErP Ready These units are directly-fired gas warm air heaters with ventilator-assisted atmospheric multi-gas burners. Installation, as well as gas and exhaust connections, must only be carried out by an authorized installer. The gas warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation mode - Inlet air temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage heating operation*, controlled via room thermostat and heating control switch - Ventilation° control via ECOtronic TN-L° with day/night/week programming - Roof flue discharge, version B or C° - Wall flue discharge, version C° Gas Warm Air Heater Type: UDSA055-4E Gas Appliance Category: B22P-C12-C32-C52-C62 Destination: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 8.40 mbar Max. Nominal Heat Input (Hs) QN: 66.04 kW Max. Nominal Heat Input (Hi) QN: 59.50 kW Min. Nominal Heat Input (Hs) QN: 33.02 kW Min. Nominal Heat Input (Hi) QN: 29.75 kW Max. Nominal Heat Output: 54.74 kW Min. Nominal Heat Output: 26.92 kW Connection Voltage: 230V 1N, 50Hz Air Volume Flow: 5,830 m³/h Protection Class: IP20 Pin No. 0461BN0677 Financing through our bank is available. complete-concept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 2018, moč: 0,55 kW (0,75 KM), AR Filtration Air Purifier ARF 700 YB, year of manufacture 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry and wet machining processes. The extracted air first passes through a sequence of metal filters and a synthetic filter, which capture the larger particles. In the next stage, the air is routed through a filter with very high filtration efficiency (HEPA filter H13) according to European standard EN 1822, so that it is completely purified before being recirculated into the ambient environment. Duodpfx Ajv T Db Ted Aop Dimensions: 460 x 500 mm, height 1,050 mm Weight: 80 kg Airflow rate: 700 m³/h Connection: 100 mm #8347

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, skupna višina: 2.950 mm, skupna dolžina: 3.300 mm, skupna širina: 1.350 mm, Complete clean air extraction system with briquette press and piping with slides, etc. Extraction system for woodworking companies with integrated briquetting press. Extraction System Manufacturer: ALKO Type: MOBIL-JET 250 Year of manufacture: 2003 Extraction diameter: 250 mm Nominal capacity: 4,900 m³/h Motor power: 6.5 kW Dimensions approx. 330 x 135 x 295 cm With extraction control for automatic slide control. Briquette Press WEIMA / ALKO Type: APC30S Year of manufacture: 2007 Motor power: 5.5 kW Pressing capacity: 30 – 50 kg/h Duodevr S Ncepfx Ad Asp Briquette diameter: approx. 50 mm Including complete pipework with branches, bends, and slides. An additional lot of extraction pipes with fittings is available and can be purchased at a favorable price. The system is dismantled and packed ready for loading. Condition: see pictures or refer to the item description. Pickup by the buyer is possible. All dimensions are approximate. All information provided to the best of our knowledge but without warranty. Subject to prior sale. The items can be collected personally or shipped at the buyer’s expense. Shipping costs are provided as a guideline; actual costs may vary depending on the distance and unloading options. The price stated is the net final amount, plus VAT. An invoice with VAT shown will be issued.

Stanje: novo, ABEL air-charging fitting (pressure side) for piston diaphragm high-pressure pumps. Duedeiyp Tzopfx Ad Aep NEW! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Stanje: novo, Air charging valve assembly for ABEL high-pressure piston diaphragm pump, for both suction and discharge sides. NEW. Dedpsiyp Thefx Ad Asup We require the pump type / series and the machine serial number from you. Piston diaphragm pumps and spare parts available from stock or with short delivery times. Your reliable ABEL pump supplier, service partner, and spare parts provider for ABEL pumps.

Leto izdelave: 2023, stanje: novo, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary (open/close) control of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial Number: 23012‑2129534 Year of Manufacture: June 2023 Compliance: CE – Complete nameplate available Nominal Section (Rectangular DN): 1000 × 500 mm Total Weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial gauge plates, peripheral flange Actuation Type: Mechanical On/Off with installed actuator Blade Type: Reinforced rectangular blade (central shaft) Shut-off Mode: Full shut-off (shut-off type) Main Material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) This damper is particularly suitable for installations requiring reliable binary isolation, especially: Dodpfx Adjyhxmzo Aoup - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, REFRIGERATION DRYER HANKINSON HHDP 1451 G (1) Dsdpfx Adju Hyw Ue Aeup CAPACITY: 24 m³/min Year of manufacture: 2010 The dryer is fully operational.

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), REFRIGERATION DRYER AIRPRESS APX 24 CAPACITY: 2.4 M³/MIN Duodpfx Adji Att Ss Asp YEAR OF MANUFACTURE: 2018 THE DRYER IS FULLY FUNCTIONAL.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Beko DPRA 370/AC Refrigerant Dryer Capacity: 6.2 m³/min Year of manufacture: 2016 Dusdsv Snnnspfx Ad Aop The dryer is fully functional.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, INGERSOLL RAND Refrigeration Dryer Capacity: 13 m³/min, Year of manufacture: 2010, The dryer is fully operational. WE ALSO OFFER A WIDE RANGE OF SCREW AIR COMPRESSORS, REFRIGERATION DRYERS, AND WELDING EQUIPMENT FOR SALE. Djdpfoiuk D Dex Ad Ajup

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1998, REFRIGERATION DRYER KAESER TF 171 Dedpfxjt Hdims Ad Aeup Capacity: 17 m³/min The dryer is in full working order.

Leto izdelave: 2004, stanje: rabljeno, Koch rezervoar za suh zrak 1x100 litrov, 1x200 litrov, 1x400 litrov z dodatnim ogrevanjem in regulatorjem Leto izdelave: 2004 Cena: 7.400,00 € Kontaktna oseba: g. Rainer Eckerle Dsdpfxsxltdwj Ad Aoup

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Amano PiA-30U odsesavač prašine U dobrom radnom stanju. Pogledajte i ostale naše oglase. Duoderyxmxopfx Ad Asp

Stanje: kot nova (razstavni stroj), Brandneu, unbenutzt. Bitte sehen Sie sich auch unsere anderen Inserate an. Dsdpsu Uth Hofx Ad Aoup

Stanje: dober (rabljeno), Mäder DLP 1700 HV Direct-acting Pneumatic Press Direct-acting pneumatic presses are used wherever constant pressing force is required over an extended stroke or where a large immersion depth is needed: for example, for pressing in pins, bushings, and ball bearings, or for forming operations. Dujdjd Tam Nspfx Ad Aep DLP 1700 HV Direct-acting pneumatic press Pressing force at 6 bar: 17 kN Working stroke (H mm): 40/60/80 More items—new and used—can be found in our shop! International shipping costs upon request!

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Invent zračni ventilator ITB150-15 Lastnosti: Moč: 120 kW Napetost: 500 V Pretok zraka: 51 m3/min Tlak: 40 – 150 kPa Dujdpfx Asvyrxysd Aep

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Invent zračni ventilator ITB150-15 Lastnosti: Moč: 120 kW Napetost: 500 V Pretok zraka: 51 m3/min Tlak: 40 – 150 kPa Djdpfxovyrxge Ad Asup

Stanje: rabljeno, moč: 2 kW (2,72 KM), barva: črn, skupna masa: 120 kg, Leto izdelave: 2018, BE-COOL LC 440 Mobile adiabatic air cooler Air flow rate: 32,200 m³/h Djdpfx Asyddnred Asup Speed: Variable Water tank: 180 L Noise level: 50 dB ~ 70 dB Dimensions (cm): 186 (H) × 155 (W) × 81 (D) Weight: 120 kg Power consumption: 1.35 kW (1250 Watts) If you have any questions regarding the machine or would like to schedule a viewing appointment, please feel free to contact us by phone or email.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Three-phase choke Manufacturer: Siemens Type: 1 P 6 SN 1111-OAAO-1 EA0 Duedpjfbb Dujfx Ad Aop Version: b GWE 00000587022 80 kW

Leto izdelave: 2003, stanje: dober (rabljeno), Output: 350 m³/h Dsdpfofl Ig Rox Ad Ajup

Stanje: rabljeno, Leto izdelave: 2011, Manufacturer: BEGA Djdpfx Adjuk A Ens Ajup Capacity: 21 m³/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Rabljeni hladilni sušilnik Atlas Copco FD1250VSD. Integrirani pretvornik. 75 m3/min. Dedpfjx Af Ehex Ad Aeup

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: nepreverjeno, Letnik 2018 Dusdpfxjx Ab Rao Ad Ajp 23 m3/min

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Dedpfx Adehkztwo Aeup Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -