Polnilnik 24 Proti 100 A nakup rabljenega (79.783)

Stanje: rabljeno, vrsta goriva: električni, Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger Iboded A D Ukepfx Ah Djc - Output: 24 Volts - Output: 65 A - Connection: 230 Volts - Dimensions: 480/450/H785 mm - Weight: 70 kg

Stanje: rabljeno, vrsta goriva: električni, Forklift battery charger, industrial charger, forklift battery charger, industrial charger Ijdpfx Aob A S Hkeh Dobc - Voltage: 24 volts - Output: 25 A - Connection: 230 volts - Weight: 30 kg

Stanje: rabljeno, vrsta goriva: električni, Forklift battery charger, industrial charger, forklift battery charger, industrial charger - 24 Volts - Output: 4 A - Connection: 230 Volts Ibjdpfx Asb S Ht Ajh Doc - Weight: 8 kg

Stanje: dober (rabljeno), Forklift battery charger, industrial charger, forklift battery charger - 24 volts Ibedpfxsb A H Hbo Ah Doc - Output: 63 A - Connection: 220 volts

Stanje: novo, konfiguracija osi: 3 osi, medosna razdalja: 1.410 mm, dolžina tovornega prostora: 16.160 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.770 mm, prva registracija: 03/2023, vzmetenje: zrak, barva: rdeča, velikost pnevmatike: 245 / 70 R17.5, Leto izdelave: 2022, Oprema: dvižna zadnja plošča, Colour: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 - New/Unused Weights: King-pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload capacity: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Maximum extended length: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm +100 mm / -100 mm Height: 3,755 mm King-pin height: 1,300 mm Axles: Axle brand: BPW Eco Plus Air suspension Lift axle 1 Axles 1 & 2: fixed Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 twin-tired Load index: 143/141J (146/146F) Additional Features: Remote controlled hydraulic loading ramps Hydraulically operated loading ramps Mechanical rear supports Side extensions Underrun protection Wheel recesses Wheel recess covers 2.0'' king-pin Lashing rings Stake pockets Central lubrication Marker boards for oversize load BPW landing gear Toolboxes at gooseneck = Additional Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: twin-tyred; lift axle; max. axle load: 12,000 kg; tyre tread depth: left inner 100%, left outer 100%, right inner 100%, right outer 100% Front axle 2: twin-tyred; max. axle load: 12,000 kg; tyre tread depth: left inner 100%, left outer 100%, right inner 100%, right outer 100% Rear axle 1: twin-tyred; max. axle load: 12,000 kg; steered; tyre tread depth: left inner 100%, left outer 100%, right inner 100%, right outer 100% Rear axle 2: twin-tyred; max. axle load: 12,000 kg; steered; tyre tread depth: left inner 100%, left outer 100%, right inner 100%, right outer 100% Dimensions Overall dimensions (L x W x H): 1,616 x 255 x 375 cm Weights Unladen weight: 11,300 kg Payload: 55,200 kg Gross vehicle weight: 66,500 kg Functional Tail lift: Goldhofer Extendable body: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: None Financial Information Price: On request Further details Iodpfx Ahjuu Hgds Djbc Please contact Stefan Schaapveld for more information.

Stanje: zelo dobro (rabljeno), Na prodajo profesionalni nosilec orodja priznane blagovne znamke WNT Germany – model B40 ER16M A=100. Nosilec je opremljen s precizno vpenjalno tulec Centro-P Germany HPC16MS-DI, ki zagotavlja maksimalno natančnost in stabilnost pritrditve orodja. V kompletu je priloženo tudi VHM svedro, zato je set takoj pripravljen za uporabo na CNC stroju. Zelo dobro ohranjeno, nosilec je brez zračnosti, z običajnimi sledmi uporabe. Oprema premium razreda – idealna za profesionalne obdelovalne centre, kjer sta pomembni natančnost in zanesljivost. Isdpsw Rr A Defx Ah Djbc

Stanje: zelo dobro (rabljeno), Zelo dobro ohranjeno, precizen nosilec priznane znamke WNT, nemška izdelava. Opremljen s tulko Centro-P HPC16 – zagotavlja visoko natančnost kroženja in stabilno vpenjanje orodja. Na nosilcu je nameščen monolitni VHM rezkar za precizno obdelavo. Skupna dolžina A=100, tip vpenjanja SK40 (DIN 69871 AD). Oprema vrhunskega razreda, pripravljena za delo na CNC obdelovalnih centrih. Isdew Rrzmepfx Ah Debc

Stanje: pripravljen za uporabo (rabljen), Festo DNG-160-1000-PPV-A cylinder 33024, used, in good condition, 100% fully functional. IMPORTANT: Please inquire separately for packing and shipping costs! ATTENTION: Please inquire for charges for packing and transport separately! Ibodpfx Aji D U I Aoh Dec

Stanje: rabljeno, Dear Sir or Madam, We hereby offer you a Grundfos NK100-250/242 AH-F-A-BAQE complete with Siemens 1LG6 283-2AB90-Z. Ibsdpjwv Nmrofx Ah Dsc

Stanje: pripravljen za uporabo (rabljen), Neugart Type: PL 70-05 Article number: 52409-010-01 planetary gearbox, used, in good condition, fully functional, scope of delivery as per photos. Iodpfx Astxfgxjh Djbc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Feeding and Dosing Devices Ijdpfsd Twgcex Ah Djbc Brand: A. Tschritter Type: WC 100 Year of manufacture: 2004, 2002 Available: 2 units

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Iedemk Iktspfx Ah Debc Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2017, barva: drugo, Leto izdelave: 2017, Eigengewicht: 6.250 kg Achse 1: links 8 mm, rechts 8 mm Achse 2: links 14 mm, rechts 14 mm Iedpfewzx Ipex Ah Dsbc Achse 3: links 14 mm, rechts 11 mm

Stanje: rabljeno, skupna masa: 35.500 kg, največja dovoljena obremenitev: 29.970 kg, konfiguracija osi: 3 osi, prva registracija: 11/2010, naslednji pregled (TÜV): 10/2025, Leto izdelave: 2010, Oprema: ABS, CARNEHL TIPPER TRAILER CHKS/A STEEL & ALUMINIUM BODY ALCOA SAF AXLES VERY WELL MAINTAINED ----VEHICLE HISTORY * SINGLE OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE SPECIFICATIONS * First registration: 02.11.2010 * Model: CHKS/A * 24 cubic meters capacity * 3 axles * Disc brakes * SAF axles * ALCOA aluminium rims * Lift axle * Sliding tarpaulin * Permissible gross weight: 35,550 kg * Unladen weight: 5,080 kg * Payload: 29,970 kg * Tyre size: 385/65 R 22.5 * Very good tyres * EXPORT SALES ONLY WITH DEPOSIT MINIMUM €500 - €2,000 Isdpoxb Ibcsfx Ah Djbc ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY LICENCE PLATES AND 17-21 DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a minimum deposit of €500.00/€1,000.00 is required. Amendments, errors and prior sale excepted! You can find more vehicles on our homepage: Sale exclusively according to our terms & conditions—see our homepage Important note / Important information: Despite careful review of all offer details, errors may occur. Some of these may arise from transmission errors in the systems of various platform providers. Consequently, we would like to point out that all information is provided without guarantee and does not constitute a legal entitlement. Legal notice: This sales listing does not constitute an offer within the meaning of §145 BGB. Rather, it is information intended to facilitate the initiation of a contract. The information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button Ibjdpfxswyc H Ts Ah Dsc - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Ponujamo komplet 23 enakih, neuporabljenih (New Old Stock) Festo pnevmatskih valjev, model DNG-160-100-PPV-A-S2. Idealni za avtomatizacijo, močno vpenjanje, stiskanje ali zalogo za vzdrževanje. Podrobnosti: Količina: 23 kos Premer bata: 160 mm Hod: 100 mm Ibedpfswxfrpox Ah Djc Maksimalni tlak: 10 bar Nastavljivo pnevmatsko blaženje (PPV) Ustreza: ISO 15552 / VDMA Stanje: neuporabljeni, skladiščeni z zaščito bata Cena: Posamezna enota: 490 € 3–5 kos: 475 €/kos 10+ kos: 450 €/kos Celoten komplet: 400 €/kos

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.120 mm, pomik po osi Z: 900 mm, nazivna (navidezna) moč: 10 kVA, širina mize: 1.120 mm, višina mize: 1.120 mm, največja hitrost vretena: 1.100 obr/min, teža orodja: 15.000 g, The machine has undergone a complete general overhaul and is like new, equipped with 4-axis Newall digital readout. Ibedpfov A Irhex Ah Doc

Stanje: dober (rabljeno), Table size 1100x300 mm Travel distances 700x250x470 mm Spindle taper ISO40 Spindle speeds 22–2000 rpm Iodpobwb Uyjfx Ah Djbc With digital readout. Various accessories. MARCELS MASCHINEN AG

Stanje: novo, Leto izdelave: 2024, Condition: new Isdewiry Iepfx Ah Dobc Year of manufacture: 2024 Stock number: 7305 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €46,400 Leasing rate: €886.24 Quantity in stock: 1 Pressing force: 100 t Stroke: 500 mm Ram: 700 x 350 mm Table: 800 x 600 mm Installation height: 500 mm Throat: 300 mm Rapid traverse: 25 mm/s Working speed: 4 mm/s Motor: 4 kW Length: 1900 mm Width: 1200 mm Height: 2600 mm Weight: 2100 kg 2-point round guidance Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual including pressure switch OPTIONS: Delivery time with options approx. 2–3 months from order • 4-point round guidance € 1,900 • Light curtain € 7,300 • Siemens control for stroke and pressing time programming € 4,000 • Siemens touchscreen control, up to 50 programs storable, for programming: - Upstroke and downstroke percentages - Dwell time at lower stroke - Decompression time - Working pressure setting - Piece counter - Press stop in up and down movement - Manual and automatic operation setting - Alarm and fault management € 9,000 • Hour counter € 400 • Piece counter € 400 • Decompression valve € 700 • Oil cooler with decompression valve € 3,700 • Pressure switch included

Stanje: rabljeno, Leto izdelave: 2001, 3 MONTHS WARRANTY Offer includes: - Collating Tower VAC-100a Isdeu Srzispfx Ah Djbc Horizon VAC-100a Vacuum Feed Collating Machines - Technology: Touch & Work - Model: Suction and Blower Air Collating Tower - Number of Stations: 10 per collating tower - Error Prevention: Miss-feed, double-sheet, and jam detection - Job Memory: 9 memory slots for repeat jobs - Expandability: Up to 6 towers (60 stations) Programs: - Double Cycle (Nonstop Operation) - Insert Mode (single and double) - Booklet Program - Block Program - Selective Collating - Format: max. 500x350mm; min. 148x120mm - Paper Weight: 40-250g/sqm - Loading Capacity: 55mm per station - Output: up to 9,500 sets/h - Power: 230V/50Hz - 1.86kW - Dimensions: 842x652x1,961mm - Weight: 310kg On request we can organize the following services for you: Packaging, loading, transport (by sea or air) including customs clearance Sourcing of a leasing offer

Stanje: rabljeno, skupna masa: 24.000 kg, lastna masa: 4.390 kg, konfiguracija osi: 3 osi, prva registracija: 11/2005, vzmetenje: zrak, velikost pnevmatike: 265/70 R19,5, medosna razdalja: 4.400 mm, barva: siv, Oprema: ABS, Drum brake Payload 19,610 kg Lowerable drawbar Ibjdpfx Ahjrr Ufuo Djc BPW axles Subject to errors

Stanje: kot nova (razstavni stroj), The HPK 100 A is a high-performance hydraulic press from the renowned KNUTH A-series, leading its category among hydraulic presses. This C-frame design ensures high rigidity and withstands maximum pressing forces of up to 100 tonnes. Manufactured in Europe, these machines impress with precision and durability, featuring large ram plates and a flexible hydraulic system that enables variable stroke-time settings. Mobile operation ensures high safety standards and intuitive handling, while high-quality seals and surface finishes provide low wear and long-term reliability. Standard equipment includes, among other features, a two-hand control panel, manually adjustable pressure switch, and a Siemens PLC for optimal operation. This hydraulic press is ideal for deep drawing, forming, and punching applications, and tailored solutions are available upon request. For further information about the HPK 100 A, an exceptional hydraulic press, feel free to request a quotation. Ibsdpsq R Rk Dofx Ah Doc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Heidenhain TNC 430 PA CNC Maximum spindle torque: 900 Nm Maximum feed force in axes X, Y, Z: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table size: 1,000 × 14,000 mm Number of T-slots in table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between horizontal spindle axis and table surface: 275 mm Maximum distance between horizontal spindle axis and table surface: 1,775 mm Ibedpfxsxdwkfo Ah Doc Vertical spindle: Minimum distance between vertical spindle front face and table: 50 mm Maximum distance between vertical spindle front face and table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in spindle: 16,500 N Main machine dimensions Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Weight of electrical cabinets: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be installed by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, For sale: Turbochargers type M33 KTT2 A/R.72 by GARRETT/HONEYWELL, part number 710223-0005. The turbochargers were removed from new engines and are therefore in as-new condition. Isdpfx Ahjukct Ej Dsbc A total of 94 units are available in stock. Price per unit: €350 net, negotiable. Sale exclusively to commercial buyers, with warranty and liability for material defects explicitly excluded.

Stanje: novo, The KP 100 A is a high-performance hydraulic press in the hydraulic press category and belongs to the H-frame hydraulic presses product group from KNUTH. This machine, manufactured in Europe, offers a pressing capacity of up to 100 t and is ideal for deep-drawing, forming, and punching applications. The robust steel construction ensures high rigidity and durability, while the T-slots on the ram plate and worktable allow for easy tool mounting. The mobile two-hand operation provides additional safety, and the adjustable limit switch enables precise adjustment of the stroke. Thanks to the integrated Siemens PLC and the maintenance-friendly hydraulic unit, the KP 100 A is suitable for both testing and series production. If you require customized solutions, you can request them at any time. Purchase the KP 100 A now, the powerful H-frame hydraulic press, to optimally meet your hydraulic press requirements. Iedpfxsxhdzfs Ah Dobc