Ogrevalna peč, peč, zagonska peč

Vötsch VAW 60/100

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Ihsdpfx Afednv D Se Tot Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months (Image similar)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Ijdjwb Erzspfx Af Toht

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Iodpsqzkdmjfx Af Tjht

Stanje: rabljeno, Rotary Vane Vacuum Pump - Oil-lubricated Ihsdpfx Afocnyy Ho Tet Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Condition: Fully Refurbished Warranty: 12 Months Includes: Oil filling (mineral oil), operating manual with spare parts list Voltage: 50/60Hz 230-400/460V Motor Power: 4 kW Nominal Pumping Speed: approx. 200 m³/h Ultimate Pressure without gas ballast: approx. 0.08 mbar Delivery time: ex stock

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Ihedpfx Afofnh Tgs Tst Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Iodpfofxyhfjx Af Toht Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, – Manually operated – Shaft size 30 mm – Weight 30 kg Ihjdpfx Aelwpr Rsf Tst

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven compliant with DIN EN 1539 for use with solvent-based materials - Max. temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 Ihodpfeiq Uv Nox Af Tet - Permitted solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, rated current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available for fixed installation (fuse protection required: 35 or 50 A) - Including 1 mesh shelf insert - Weight: 550 kg - Documentation included Viewing possible in our warehouse by appointment. Oven, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heating oven, drying oven, tempering oven, paint dryer, solvent oven

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Ihsdpfxeh Hvk Ae Af Tst Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: zelo dobro (rabljeno), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg Ijdpfsu Hanyex Af Tjht No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.