Peha nakup rabljenega (70)

Leto izdelave: 1978, stanje: dober (rabljeno), številka stroja/vozila: 6006/478, Broaching machine - Vertical Giedpfx Aofc T E Ajgwep Manufacturer: Rausch Model: RS8/1300 Year of manufacture: 1978 Pulling force: 8 tonnes Stroke: 1,300 mm Weight: 0.92 tonnes

Leto izdelave: 1965, stanje: rabljeno, številka stroja/vozila: 2112, Color: green Pulling force: 2.5 t Gisdpfxsbrclve Agwop Lift: 1000 mm Weight: 1.2 t 3 kW Footprint: approx. 140 x 130 cm

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 758, Overhauled Pulling force: 2 t Gedebrcmhopfx Agwoip Lift: 1000 mm

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 20236, Tractive force: 10 tons Giodpfsbrcmrox Agwop Stroke: 1500 mm 1 broaching station Weight: approx. 1800 kg Power: 9.5 kW/380V With feeder and mechanical chip conveyor

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 662681751, Manufacturer: Rausch Type: RS6 / 1300 Machine Number: 662681751 Year of Manufacture: 1992 Godpfx Ajfc T Edogwsip Power Supply: 3-phase (3N ~) 380 Volt / 50 Hz Connected Load: 7.1 kW Rated Current: 17 Amps Weight: 810 kg Wiring Diagram Number: RS6 – 39 With Handling Unit Table: 520mm x 320mm

Leto izdelave: 1962, stanje: dober (rabljeno), številka stroja/vozila: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine Number: 1083 Year of Manufacture: 1962 Gedpfxefc T Eue Agweip Tensile Force: 10 tons Stroke: 915 mm System: DIN 1415 With platform for above-floor installation

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm 3 clearing stations With chip conveyor + platform for above-floor installation and safety door. Gsdpfx Aebrcmksgwjip

Leto izdelave: 1984, stanje: rabljeno, številka stroja/vozila: 16700, Color: white With magnetic panel feed, automatic feeding system, Tensile force: 10 tons Stroke: 1200 mm Weight: 6 tons Gisdpfx Asbrclqegwop Footprint: approx. 160 x 140 cm

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: 3167, Clearing force: 16 t Lift: 1600 mm Gisdpeccxqtsfx Agwop Weight: 8.5 t

Leto izdelave: 1991, stanje: dober (rabljeno), številka stroja/vozila: nn, Broaching Machine – Vertical Giedpfxjfc T Ewe Agwsp Manufacturer: Locher Model: RWIL 10 x 1250 Year of Manufacture: 1991 Pulling Force: 10 tons Stroke: 1,250 mm Footprint: approx. 170 x 150 cm With automatic feed Magnetic chip conveyor

Leto izdelave: 1971, stanje: rabljeno, številka stroja/vozila: 51, Color: yellow Pulling force: 6.3 t Giodpfx Aebrclzjgwsp Lifting height: 1,000 mm Weight: 3,300 kg

Leto izdelave: 1981, stanje: rabljeno, številka stroja/vozila: 142, Aumat M320 14,873 operating hours Mains voltage: 380 Volt / 50 Hz Control voltage: 220 Volt / 50 Hz Signal voltage: 24 Volt Gedpfx Agjc Swchsweip Power: 15 kW / Current: 40 A Wiring diagram: No. 142.006.3 Counter-pressure broaching slide: 20–30 bar Guide slide: 40–45 bar Broaching pressure: 13–90 bar Counter-pressure guide slide: 20–25 bar Vickers hydraulic unit Order number: 626376 Wiring diagram number: 1420032 With chip conveyor Broaching stations: 3 With accessories

Leto izdelave: 1960, stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Giedpfxsui Sbe Agwop Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1980, stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm Gisdscdtplopfx Agwjp broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1959, stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm Gedpfxs Rwa Uo Agwoip cutting speed: 5.6 m/min return speed: 30 m/min

Leto izdelave: 1956, stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Godpfx Aedbmgmjgweip Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1951, stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Giedpodcdrpefx Agwep Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). Gijdpfx Aodffzfegwjp The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1962, stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Giedpfxedl Uzko Agwsp Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1958, stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Giedpfxjda Ugij Agwep Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Godpfscc D Ddjx Agwoip Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Leto izdelave: 1972, stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor Godpfx Agscdtnhewsip 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 34, max. Zugkraft: 10 t max. Hub: 1000 mm Schnittgeschwindigkeit: 7.5 m/min Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Die Maschine ist für das Räumen von Rohren geeignet. Godjnd Dmopfx Agwsip

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Oprema: ABS, Kögel S18 Mega dvižna streha zračno vzmetenje 2-osni Kljub največji skrbnosti napake v oglasu niso izključene. Pridržujemo si pravico do napak in vmesne prodaje! Giodpfx Ajymy Slogwop

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.960 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, Leto izdelave: 2012, Schmitz Cargobull S01 SCS 09 S01 QuickSlide, dvižna os, letvica za zaustavitev palet levo in desno. Giodpfx Ageymyq Ijwep Kljub največji možni skrbnosti napak v oglasu ni mogoče izključiti. Pridržujemo si pravico do napak in predprodaje!