Cev pehanje stroj

Forst RTS 10x1000x320

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Lifting capacity: 4,500 kg Overall height: 2,705 mm Lift height: 5,675 mm Mast type: Triplex Fork length: 2,400 mm Drive type: Electric Ppedpfx Ajwvtf Seczel Including fork positioner Including sideshift UVV inspection and maintenance newly performed

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Podpfx Ajd Nb A Nsczepl Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 2008, Deli, ki jih roka kaže, niso vključeni. 12.000 o/min X 610 mm Y 420 mm Z 450 mm Ppjdeuc Tpgjpfx Aczol

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Pjdpfx Aceifi D Tjzjpl Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door Ppodpfx Aeww Nazjczjl - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Ppjdpfx Acsvi Hryezel Rapid traverse: 1800 mm/min For further data, see data sheet Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Stanje: dober (rabljeno), Razdalja med konicami: 6500 mm Višina konic: 665 mm Premer obdelave nad ležiščem: 1270 mm Premer struženja nad suportom: 1000 mm Hitrost glavnega vretena: 3,55–710 vrt./min Premer planske plošče: 1200 mm X-pomična razdalja: 600 mm Psdpfxew R Avbj Aczjpl Premer izvrtine glavnega vretena: 128 mm Premer pinu konjička: 200 mm Pomik pina konjička: 350 mm Notranji stožec pina konjička DIN 55028 Glava glavnega vretena DIN 55027 Oprema: 3 lunete Dokumentacija

Stanje: rabljeno, Leto izdelave: 1977, Surface grinding machine, manufacturer Okamoto, model PSG-63 UA, year 1977. Magnetic chuck: 600 mm x 300 mm. Ppodeiz Tmkepfx Aczel Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation.

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Ppsdpfjcm Elnsx Aczsl

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Ppjdpjcc D Ddjfx Aczol Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.