Pehanje stroj

Rausch RS 3/1000

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1988, številka stroja/vozila: 3615/673, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, hitrost vzvratne vožnje: 3 mm/s, skupna dolžina: 750 mm, skupna širina: 800 mm, skupna višina: 2.250 mm, -WR 177- Proizvajalec: Rausch Model: RS3 /1000 Številka stroja: 3615/673 Leto izdelave: 1988 Teža: 350 kg Revizija: 04/2025, izvedena s strani podjetja Wiemers AG Splošne / tehnične informacije: nerabljen, delno obnovljen, mehanski, navpični stroj za razširjanje utorov Rausch RS 3 brez oznake CE Vlačna sila: 3.000 kg Hjdpez Hl U Isfx Ag Ajnu Hitrost razširjanja utorov: 3 m/min Hitrost povratka: 3 m/min Največji hod: 1000 mm Največja dolžina orodja: 1200 mm Dimenzije mize / delovne površine: 430 mm x 320 mm / 340 mm x 220 mm Prehod v mizi: Ø 90 mm za standardne razširalnike utorov „sistem Rausch“ Premer obdelovanca: poljuben (pri odstranjeni kabini) Zmogljivost razširjanja utorov / širina utora: do 18 mm v jeklu (od 16 mm širine utora samo z ločenim držalom orodja) Dimenzije (v x š x g): 2.250 mm x 800 mm x 750 mm (v = vključno s 3-stransko zaščitno kabino) Motor: 3,0 kW / napajanje: 400 V / 50 Hz Oprema: - zaščitna vrata z varnostnim nadzorom (krog za nujno ustavitev) - zbiralnik opilkov - od zunaj nastavljiv sistem za nastavitev dolžine orodja (sistem Rausch) - zaščitni pokrov za nastavitev hoda in električne stikalne enote - električna detekcija vpenjal (sistem Rausch) (nadzor odvzema orodja za preprečevanje nenamernega umika vpenjalnega mostu, dodatna varnost za operaterja in orodje) - vgrajen sistem za hlajenje - 4-stransko zaprta zaščita proti brizganju s zaščitnimi vrati - dodatno ojačan koš za opilke in sito za opilke z magnetnim vstavkom - upravljalna plošča, zunanja - 2 mazalna točka za trapezni vijačni pogon z ročno mašinico za podmazovanje, nameščena neposredno na vijačni matici Opomba: Stroj je bil delno obnovljen s strani podjetja Rausch. Izmenjani in obnovljeni so naslednji deli: - nove trapezne vijačnice in vijačne matice iz ulite, odporne proti obrabi bronze - vsi ležaji in tesnila so bili obnovljeni - nova električna instalacija - 4-stransko zaprta zaščita proti brizganju s zaščitnimi vrati na sprednji strani - nova zaščitna vrata namesto svetlobne pregrade v strojni kabini - novi vpenjalni elementi - vsi pločevinasti deli, kot so zaščitni pokrovi, zbiralnik opilkov, koš, sito in zaščita vijačnice, so novi. - zunanja upravljalna plošča Splošne informacije: Dvojni vijačni pogon zagotavlja miren in osrednji vpenjalni točki ter konstantno hitrost razširjanja utorov. Stroj je primarno zasnovan za izdelavo utorov za pero, do 18 mm. (od 16 mm utora le z ločenimi držali orodja) Zaradi konstrukcije je stroj hiter in lahek, ter enostaven za nastavitev za razširjanje utorov s ploskimi razširalniki utorov za utore za pero. Zaradi konstruktivno univerzalne zasnove vpenjalnega mostu in mize stroja je mogoče razširjanje utorov s profilnimi in ploskimi razširalniki utorov brez uporabe dodatnih vpenjalnih glav.

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg Hnjdpji Eg Nksfx Ag Aou

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Premer brušenja: 6mm–150mm, maks. pomik brušenja: 125mm, nihajni premer nad mizo/s pokrovom: 600mm/260mm, pomik X/Z: 500mm/170mm, hitro pomikanje: 10m/min, delovni pomik: 10m/min, ločljivost X/Z: 0,0001mm, hitrost vretena obdelovanca: 850obr/min. Dimenzije stroja X/Y/Z: pribl. 2550mm/3100mm/1800mm, teža: pribl. 2600kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Stroj se nahaja na Kitajskem. Hnjdpoxf Ikfefx Ag Aju

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Pritisk 85 t, Dolžina upogibanja 2050 mm, Razdalja med stebri 1750 mm, Krmiljenje DELEM, Hod 215 mm, Globina grla 410 mm, Skupna moč 13 kW, Teža 8.750 kg, Dimenzije stroja 3190 x 2100 x 2375 mm Hedpfx Agow Imq Ro Aenu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Dolžina brušenja 800 mm Širina brušenja 375 mm Višina obdelovanca 375 mm Električna magnetna vpenjalna plošča 900 x 300 mm Hnjdsunt Iuspfx Ag Aou Hitrosti vretena 1500 - 3000 min⁻¹ Pritrdilna površina mize 1550 x 370 mm Vzdolžni hod mize 100 - 1000 mm Maksimalna teža obdelovanca 350 kg Dimenzije brusilnega koluta 300 x 50 mm Skupna potrebna moč 9 kW Teža stroja cca 4,6 t Potreben prostor cca 4,0 x 2,3 x 2,6 m Oprema za mokro brušenje, samodejni navpični pomik. Preklopno za potopno ali ploskovno brušenje. Električna naprava za ravnanje Električna magnetna vpenjalna plošča 900 x 300.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material Hnsdouiy Hropfx Ag Asu - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Premer elektrode: 0,5 do 3 mm Pot gibanja: 300x400x350 mm Certifikat CE potrjuje najvišjo možno stopnjo varnosti Celotna serija izdelkov je zasnovana za namestitev na površini Hnsdpfx Asf Hmn Aog Asu Elektrode: premer 0,5–3 mm Pot gibanja po osi X: 300 mm Pot gibanja po osi Y: 400 mm Pot gibanja po osi Z: 350 mm Pot gibanja po osi W: 300 mm Hitrost gibanja po osi C: 30–60 mm/min Hitrost hitrega gibanja po osi Z: 120 mm/min Razmerje stranic: 300:1 Dimenzije mize: 320x440 mm Maksimalni delovni tok: 30 A

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Hnodpfxocm Elno Ag Asu

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm Hodpfx Agswzbq Te Ajnu B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Hedpfx Aor A Hcbeg Asnu Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.