Rausch Rs 3/1000 nakup rabljenega (73.522)

Leto izdelave: 1993, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 3694/895,

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: 3813, skupna masa: 600 kg, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, premer obdelovanca (maks.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of Manufacture: 2019 Never commissioned Complete documentation Without broaching tools (no broach pulls included) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External broaching: Dujdpfx Aisw Evkis Uju Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 pcs, 14 mm wide, parallel/perpendicular to the clamping surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine hood for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LWH) Weight: 600 kg Voltage: 400 V Power supply: three-phase current Υ/Δ 50 Hz Rated power: 12 kVA Max. circuit protection: 25A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching tool holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½” Please submit inquiries by email only. All information provided to the best of our knowledge. Subject to change. This offer is directed exclusively to business customers as defined by § 14 BGB. Sale takes place with exclusion of any warranty. This exclusion does not apply to damages resulting from grossly negligent or intentional breach of duty by the seller, or for any injury to life, body, or health. For further information, please visit the Witzenmann GmbH website under the sections "Imprint", "General Terms and Conditions", and "Data Protection".

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 758, Overhauled Pulling force: 2 t Lift: 1000 mm Dusdpfx Aisbrcmhs Usu

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of Manufacture: 2001/2023 Weight: 580 kg Overhaul: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current “CE” marking Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Dedpfx Ajw H Dgnsi Usuu Table size / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Drive with 2 speeds - Safety door with safety interlock and chip chute - Chip chute with tool tray - Electric monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Integrated coolant system with solenoid valve (controlled via swivel system) - Patented coolant/lubricant swivel system - Externally adjustable tool length setting system (replicable across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centring plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided closed splash guard cabin with tool tray (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, with the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, check valve, and drain tap), including the coolant/lubricant swivel system, is new - The coolant supply is controlled by a solenoid valve, which can be actuated via the swivel system - The pull bridge, clamping jaws, and rack segments are new - A switchable clamping jaw monitoring system has been implemented (additional safety for operator and prevention of tool breakage) - Safety door with safety interlock, signal indicator, and door lock - Tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches installed - All electrical equipment (control cabinet) is new - No PLC installed, making the machine electrically maintenance-friendly - New drive motor (SEW Germany) with brake - Machine has been newly painted with 2-component structural lacquer General Information: The dual-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed (optionally 3 m/min or 6 m/min). By design, the machine is quick and easy to set up for broaching with flat tools for keyway cutting. Thanks to the universally designed pull bridge and machine table, broaching with profile and flat broaching tools is possible without using additional pull heads.

Leto izdelave: 1973, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 5116/447,

Stanje: rabljeno, Leto izdelave: 1972, Vlečna sila - maks. 6 t Hod bata - maks. 1000 mm Premer obdelovanca - maks. 350 mm Velikost mize 610 x 470 mm Delovno območje 520 x 320 mm Delovna hitrost 3 + 5 m/min Povratna hitrost 10 m/min Dolžina orodja - maks. 1200 mm Premer izvrtine v mizi 90 mm Dodpoyif Nljfx Ai Ujuu Skupna potreba po moči 8,2 kW Teža stroja pribl. 1 t Potreben prostor pribl. 1 x 1 x 1,8 m Stroj je opremljen z dodatki, kot so nosilci in broširne igle.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 400 kg, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with "CE" marking Pulling force: 3,000kg Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / working area: 430mm x 320mm / 340mm x 220mm Dujdpfxjw Huh Ne Ai Ueu Table opening: Ø 90mm for standard Rausch broaching mandrels Workpiece diameter: variable (removable coolant swivel system) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with stepped tool shank) Dimensions (H x W x D): 2,250mm x 800mm x 750mm (H = including 3-side safety enclosure) Motor: 2.5kW / 3.0kW Power supply: 400 Volt / 50 Hz Equipment: - Geared motor drive with 2 working speeds - Safety door with safety interlock (emergency stop circuit) - Easy-to-remove chip chute with tool rest - Tool length adjustment system adjustable from outside (Rausch system) - Protective panel for stroke adjustment and electrical switch units - Electrical sensing of clamping jaws (Tool removal control for prevention of unintentional return of pull bridge–added safety for operator & tool) - Integrated coolant system - Coolant swivel system (no electrical switch function) - 3-sided enclosed splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip screen with magnet insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled; the machine frame has been fully reconditioned. The following wear parts have been replaced/renewed: - New trapezoidal screws and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - Cooling system incl. coolant/lubricant swivel system is new - New 2-speed SEW geared motor - New electrics (Siemens) - New safety door instead of a light barrier - New clamping jaws - All sheet metal parts, including covers, chip chute, basket, screen, and spindle guard, are new. - Stainless steel control panel with permanent labeling - Machine repainted with 2-component structural coating The machine bears the "CE" mark from the manufacturer. General Information The dual spindle drive ensures a smooth and central pulling point as well as a consistent broaching speed. The machine is primarily designed for the production of keyways up to 18mm (from 16mm keyway tools, only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Because of the universal construction of the pull bridge and machine table, it is possible to broach with both profile and flat broaching tools without the use of additional pull heads.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), številka stroja/vozila: 60305, General / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: Ø approx. 900 mm Table aperture: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor, without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric clamping jaw sensing system (tool removal monitoring to prevent unintended return of the pull bridge) – Integrated coolant system with non-return valve and drain cock – Patented coolant/lubricant swivel system (retrofitted) Remarks: The machine bears the manufacturer’s CE marking. The machine is powered in our warehouse and available for inspection. Dodpfeiqkb Rox Ai Ujuu

Stanje: pripravljen za uporabo (rabljen), Vertical Broaching Machine Rausch Model RSIZ 6 / 1000 S Condition: Used Technical data: Duedpfx Aodyp Rmei Usu Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal broaching: maximum workpiece diameter 600 mm External broaching: clamping plate area 600 x 340 mm Coolant system Tensile force measuring device Automatic central lubrication Spindle guard with spring band spirals Chip conveyor Shutdown counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Collection by buyer or shipping by freight forwarder. We are happy to assist in organizing an affordable shipping option. You are welcome to arrange an inspection. A proper invoice will be provided. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The machines and tools are sold as is. Assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations from the technical data and errors in the item description are possible and subject to change.

Leto izdelave: 1978, stanje: dober (rabljeno), številka stroja/vozila: 6006/478, Broaching machine - Vertical Manufacturer: Rausch Model: RS8/1300 Year of manufacture: 1978 Pulling force: 8 tonnes Stroke: 1,300 mm Dodpfx Aiofc T E As Ujuu Weight: 0.92 tonnes

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 662681751, Manufacturer: Rausch Type: RS6 / 1300 Machine Number: 662681751 Year of Manufacture: 1992 Power Supply: 3-phase (3N ~) 380 Volt / 50 Hz Connected Load: 7.1 kW Rated Current: 17 Amps Weight: 810 kg Wiring Diagram Number: RS6 – 39 With Handling Unit Djdpfxofc T Ede Ai Usuu Table: 520mm x 320mm

Stanje: dober (rabljeno), Distance between centers: 1000 mm Duodpfetrgnzex Ai Ueu Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (OD x ID x width): 500 x 80 x 203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Workhead spindle taper: MORSE 5 Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Approx. dimensions (L x W): 440 x 370 cm Approx. weight: 4700 kg

Stanje: pripravljen za uporabo (rabljen), Stroj za izrivanje matic RAUSCH RS 6-1300 z obsežno dodatno opremo - Hodi bata / dolžina izvleka: 1300 mm Duodpeza U Alsfx Ai Ueu - Vlečna sila: 6000 kg - Vključuje 38 strgalnih igel - Vključuje 95 vodilnih puš - Delovna miza - Nastavitvene plošče - Dvigalo - Podest - 2 omari za orodje Mere: D x Š x V 1,6x1,7x2,3 metra / Teža: 2500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 370 kg, moč: 3,5 kW (4,76 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 800 mm, hitrost vlečenja: 3 m/min, skupna dolžina: 920 mm, skupna širina: 800 mm, skupna višina: 1.950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370 kg Overhauled: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch Pulling force: 3,000 kg (30 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 3 m/min Maximum stroke: 800 mm Maximum tool length: 1,000 mm Table size / Working area: 340 mm x 220 mm / 430 mm x 310 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited (without splash protection cabin) Dimensions (h x w x d): 1,950 mm x 820 mm x 900 mm (h = table height to floor without attachments) Motor: 3.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and timing belt drive - 2 broaching speeds: 3 m/min & 6 m/min - External stroke adjustment, cross-machine reproducible tool length setting system - Integrated coolant system with check valve and drain tap, as well as selector switch for automatic operation (not automatically switching in tilting operation) - Patented coolant/lubricant swing system - 3-sided enclosed splash guard cabin, open at front (without external control panel) - Machine cladding below safety door with chip protection and tool storage area - Routing of electrical wiring in steel protective conduits - Electrical monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Safety door with integrated emergency stop function - Operating panel made of stainless steel with permanent marking - 4 central lubrication points for trapezoidal spindle drive - Machine documentation Comments: The machine is completely overhauled; the machine body is fully reconditioned. The following wear parts were replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals renewed - Central drive shaft is new - Coolant system (pump, check valve, and drain tap) incl. coolant/lubricant swing system is new - The clamping jaws are new (pull bridge additionally reinforced) - Switchable clamping jaw monitoring system installed (extra safety for operator & tool breakage) - A safety door with safety interlock installed instead of rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with permanent marking - New SEW gear drive motor with timing belt drive Dusdpfx Aeytvyxsi Usu - Machine newly painted with 2-component structural lacquer The machine is available in our warehouse and can be inspected under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.000 kg, 3-osna varilna obračalna miza s hidravličnim nastavljanjem višine, nosilnost 1000 kg, daljinsko upravljanje. Premer vpenjalnega krožnika 900 mm, odlično stanje. Hitrost, višina in naklon so brezstopenjsko nastavljivi. Višina pri navpičnem krožniku min. 635 mm. Višina pri vodoravnem krožniku min. 800 mm. Višina pri navpičnem krožniku maks. 1360 mm. Višina pri vodoravnem krožniku maks. 1500 mm. Dujdpfx Aoylihyoi Uou

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.000 kg, 1000 kg load capacity complete set incl. hand and double foot remote control 3-axis welding turntable, height-adjustable with through-hole 200 mm Table plate diameter 900 mm with T-slots, alternatively with bolted solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 to 1.1 rpm Tilting angle up to 135° Hand and double foot remote control with speed indicator Very robust Price excludes accessories, accessories available at very favorable surcharge Table plate surcharge €1,900 (only in combination with positioner) Duedpsvllhrofx Ai Uju

Stanje: novo, Leto izdelave: 2024, 1000 kg load capacity complete set, incl. hand and dual foot remote control Duedpfjr Tr A Usx Ai Ueu Height-adjustable welding positioner with 200 mm through-hole Table diameter 900 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilt angle up to 135° Hand and dual foot remote control with speed indicator Very robust design Lathe chuck available at extra charge, depending on model and size

Stanje: novo, 3D luknjičasta miza 2000 x 1000 x 200 mm, raster 100 mm, debelina plošče 22 mm, premer luknje 28 mm, obdelana površina, zelo masivna, teža cca. 750 kg. S podstavkom, primerna za vse standardne dodatke s premerom 28 mm. Cena brez dodatkov. Doplačilo 500 € za set v polovični prikazani količini. Dsdpfovlli Asx Ai Ueuu

Stanje: novo, nosilnost: 1.000 kg, Oprema: nožno daljinsko upravljanje, 1000 kg nosilnosti, kompletni set vključno z ročnim in dvojnim nožnim daljinskim upravljalcem (na voljo od 600 kg do 10.000 kg) 3-osna varilna obračalna miza z nastavljivo višino s prehodno izvrtino 200 mm Premer plošče 900 mm s T-utorom ali alternativno z masivno perforirano ploščo 2000 x 1000 x 200 mm, debelina 20 mm, mreža lukenj 100 mm, premer 28 mm Višina vodoravno min. 0,65 m, maks. 1,25 m Duedpfxex Th A Hs Ai Uju Višina nagnjeno min. 0,45 m, maks. 0,95 m Hitrost od 0,01 do 1,1 obr/min Nagib do 135° Ročni in dvojni nožni daljinski upravljalec s prikazom hitrosti zelo robusten Cena je brez dodatne opreme, dodatki po zelo ugodni doplačilni ceni Doplačilo za mizno ploščo 1.900 € (samo v kombinaciji s pozicionerjem)

Stanje: pripravljen za uporabo (rabljen), Parvex LC310THR0004 servomotor SN: 8340 z dajalnikom Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79, serijska številka dajalnika: 16078305, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave kot na slikah. Duedpfjxtwa Ejx Ai Ueu

Stanje: pripravljen za uporabo (rabljen), Bosch SE-B2.040.060-00.003 Brushless Servo Motor with Heidenhain ROD 426.014 1000 . 222 651 23 ROD encoder, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used, in good condition, 100% functional Djdpfx Asi D Hd Dji Ujuu

Stanje: zelo dobro (rabljeno), RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 The system was regularly maintained and serviced by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Model: ST2K 1000 / 55 Type: Thermal Shock Chamber Cooling: Water-cooled Description Used thermal shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability tests. Usable in industry, automotive, research, and quality assurance applications. System Description - Two separate temperature chambers (hot / cold) - Automatic horizontal test basket transfer - Fast changeover operation for thermal shock tests Temperature Ranges - Hot chamber: +40 °C to +180 °C - Cold chamber: -70 °C to +100 °C - Time deviation: ±0.8 K Dsdpfx Ajy H Igfsi Uouu Test Chamber - Volume: approx. 580 liters - Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm - Max. load: approx. 150 kg Power Supply - 400 V / 3~ / N / PE / 50 Hz - Power: max. 33 kVA - Current consumption: max. 65 A Media Connections - Cooling water: G 1", approx. 3 bar (max. 10 bar) - Cooling water requirement: max. 3.2 m³/h - Cooling water return: non-pressurized - Compressed air: NW 7.2, 4–10.5 bar Dimensions - External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight - Approx. 2800 kg Equipment - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Viewing window - Interior lighting - SE-604 controller - Program operation and data logging - RS232 interface Refrigeration System - Refrigerants: R449A / R23 - R449A: approx. 8.0 kg - R23: approx. 2.5 kg Operating Data - Operating hours: approx. 4,500 h - Sound level: approx. 67 dB(A) Ambient Conditions - Temperature: +12 °C to +30 °C - Humidity: 25% to 75% rH Scope of Delivery - RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 - Scope of delivery as shown Optional Pre-shipment Service - Functional test - Refrigerant service - Leak test - Trial run with protocol Condition Used. Condition as shown in the images. Note Used device, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged upon request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Stanje: dober (rabljeno), Opis: Dujdpfx Aijy Amn Hj Uju Stroj je v dobrem tehničnem stanju, možnost preizkusa po predhodnem dogovoru.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new Dujdpfx Aow Ighioi Uou - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Leto izdelave: 1968, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/ Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of Manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Pulling force: 60 kN (6,000 kg) Dsdpfx Aov Rmvzei Ujuu Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / Working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: Unlimited Dimensions (h x w x d): 1600 mm x 850 mm x 1000 mm (h = table height to floor without attachments) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety monitoring - New chip chute with tool storage - Protective cover for stroke adjustment - Oil-tight tray on the control cabinet - Electrical detection of clamping jaws (tool removal monitoring to prevent unintended return of the pull bridge; additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via swivel system - Chip screen with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with permanent labeling - 4 central lubrication points for the trapezoidal screw drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, body, and table were fully refurbished. All wear parts have been replaced. The machine has been upgraded to the current state of technology and complies with current "CE" regulations. The machine is supplied with "CE" certification. General The dual spindle drive ensures smooth and centrally aligned pulling with a consistent broaching speed (selectable at 3 m/min or 6 m/min). By design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyway broaching. Thanks to the universally designed pull bridge and table, both profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and broaching mandrels are available on request.