Brusni lonec

Brueckner FSH 1

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Hedpfx Aijr A Hcboqsu Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Višina profila: 180 mm Največji premer brusilnega diska: 200 mm / premer krožnega brusilnega diska Premer luknje brusilnega diska: ni podatka Število vrtljajev brusilnega vretena: 2800 vrt/min Velikost mize: D x Š: 500 x 160 mm Napetost: 220 / 380 V Skupna poraba moči: 3,0 kW Hedpfeu Ngrqsx Aiqou Približna teža stroja: 0,57 t Približne dimenzije stroja (D x Š x V): 1,28 x 1,0 x 1,75 m Uporaba za ploščno brušenje (stroja za brušenje s krožnimi diski) Magnetni nosilec: D x Š = 680 x 200 mm; nagib približno 15°; vrtenje 360° po radialni skali Magnet: tip S2D; permanentni magnet, površina pritrditve 300 x 150 mm Nosilec brusilnega diska: - Vertikalna nastavitev = dolžina 180 mm, ročna; nagib = približno 45° desno/levo, ročno Upravljanje prek upravljalne plošče na stroju. Rezervoar za hladilno tekočino s črpalko in dovodo.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Hodpfxjh Ugwvs Aiqsu Weight: approx. 380 kg Cup wheel diameter: 180 mm

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW Hodpfogyd S Sox Aiqeu The machine has been completely overhauled and is therefore in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 87.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 410 mm, hitrost vretena (min.): 22.000 obr/min, Zum Verkauf steht ein CNC-Drehzentrum des Herstellers DMG, Typ CTX beta 800, Baujahr 2009. Sofort verfügbar Die Maschine befindet sich in einem gepflegten und voll funktionsfähigen Zustand. Technisch einwandfrei und sofort einsatzbereit. Technische Daten Maschinenart: CNC-Drehzentrum Hersteller: DMG Typ: CTX beta 800 Hedpsyq Hq Njfx Aiqju Baujahr: 2009 Steuerung: Heidenhain 4290 Max. Drehlänge: 600 mm Werkzeugrevolver: 12-fach Werkzeugaufnahme: VDI 40 Betriebsstunden: ca. 87.000 h Spindelstunden: ca. 22.000 h Linearführung Z1 kürzlich erneuert Revolverantrieb S2 vor kurzem ausgetauscht Maschine regelmäßig durch Kundendienst gewartet technisch einwandfrei und voll funktionsfähig Besichtigung unter Strom nach Absprache möglich Service- und Wartungsberichte vorhanden großes Zubehörpaket angetriebene Werkzeuge von WTO weitere Dokumentationen und Bilder auf Anfrage Bei Interesse einfach schreiben oder anrufen Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Ponujamo vam: CNC postrežna frézarka Proizvajalec: DMG MORI Tip: DMF 360-11 Letnik: 2020 Nadzorni sistem: Celos s sistemom Siemens 840D sl Operate Tehnični podatki: Hodi: Os x: 3.600 mm Os y: 1.100 mm Hsdpsz A Ap Isfx Aiqsu Os z: 900 mm Glavna vretena: Območje vrtljajev - glavna vretena: 20 - 15.000 vrt/min Moč pogona - glavna vretena (100/40 %): 46 / 30 kW Navor: 200 / 130 Nm Delovna miza: Površina za pritrditev mize: 4.200 x 1.100 mm Okrogla miza: premer 1.050 mm Maks. obremenitev mize: 1.200 kg Menjalnik orodij: Število mest za orodja: 120 Nosilec orodja: HSK-A 63 Podi: Hitri pod: (x/y/z): 40 / 40 / 40 m/min Delovni čas: približno 23.850 ur Čas delovanja vretena: približno 11.500 ur Tehnične lastnosti in dodatna oprema: - 5-osna simultana obdelava - NC vrtljiva frézarska glava (os B) - Integrirana okrogla miza, nameščena na levi strani, hidravlično speta - Polna kabina - Rezervoar za hladilno mazivo - Neposredni merilni sistemi - Transportni sistem za odrezke - Notranji sistem za dovod hladilnega maziva (IKZ) 40 bar, vključuje: - Papirnati filter, 600 l - 2 vrtljivi vizualni zasloni - Zračni zavesa za linearne merilne sisteme - Vrtljiva povezava za vreteno - Pištola za izpiranje odrezkov - 2 naprave za odstranjevanje oljnih in emulzijskih meglec - Zračni curek skozi sredino vretena - Infrardeči merilni senzor, Heidenhain TS 460 (če je na voljo) - Priprava za 3D quickSET - MPC – nadzor za zaščito stroja - Način delovanja 4 - ATC (cikel za prilagoditev aplikacije) - Priprava za Hofmannovo rotacijsko napravo RW-NC 300 (rotacijska naprava ni vključena) - Izmenični način delovanja - Nadzor za zaznavanje zloma orodja TRS2 - Tracyjeva interpolacija površine Dodatna oprema, prikazana orodja in pritrdilna orodja spadajo v obseg dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah, ter do vmesne prodaje!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) Hodpfxounh Hre Aiqsu • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 340 mm, širina brušenja: 170 mm, skupna višina: 730 mm, skupna dolžina: 930 mm, skupna širina: 780 mm, The G115 surface grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or shaped grinding wheels, inclined or contoured surfaces can also be processed. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cutting depth: not greater than 0.03 mm Maximum linear speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of worktable: 340 mm Cross stroke of worktable: 170 mm T-slot width of worktable: 1-12 mm Grinding wheel external dia. × bore × width: 180×32×13 mm Grinding spindle motor: 550 W/220 V Hsdpfxsxb Uq Dj Aiqju Vertical feed handwheel graduation: 0.025 mm Cross feed handwheel graduation: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packing size: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine. Smooth running of the grinding head. Compact design and low noise emission. Work enclosure/cabinet available as an optional extra. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. If you require any additional special accessories to improve work efficiency, please contact customer service. (Special accessories must be ordered separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial runout of the tapered bore axis is 0.01~0.02 mm at a distance of 100 mm.

Stanje: zelo dobro (rabljeno), HM and HSS blank grinding machine with 8 workstations, GRIFO model ACG80 Hedpfx Aied Sxaaeqsu

Stanje: zelo dobro (rabljeno), 2 schwarzer Teile, Höhe 1800 mm x Länge 600 mm x Breite 800 mm Hsdpfx Aijma E Eqjqju