Notranji Brusilni Vretena nakup rabljenega (16.511)

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Gjdpfxjlht H Ns Ah Douh Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: nepreverjeno, številka stroja/vozila: 05.0-41740, premer brušenja: 650 mm, dolžina brušenja: 600 mm, premer obdelovanca (maks.): 300 mm, vhodna napetost: 400 V, Brezsrediščni zunanji / utorni brusilni stroj Herminghausen Mikrosa SR 5 Ogled možen kadarkoli! Obratovalna napetost: 400 V, Priključna moč: 88 kW, Premer obdelovanca 5 - 300 mm, Največja dolžina brušenja pri utornem brušenju max. 600 mm, Guodpfx Ajxl T Hloh Deh Premer brusilnega koluta min/max. 480/650 mm, Luknja brusilnega koluta 304,8 mm, Premer regulacijskega koluta min/max. 270/350 mm, Luknja regulacijskega koluta 152,4 mm, Obodna hitrost brusilnega koluta 40 m/s, z zaščito max. 63 m/s, Regulacijske vretena vrtljaji brezstopenjsko nastavljivi 0 - 250 obr/min, Krmiljenje Siemens S820, Teža stroja cca 15.500 kg

Stanje: zelo dobro (rabljeno), Wide Belt Sander FORMAT 4 Finish 1302 - used - Constant working height thanks to top section adjustment, Combination unit with contact roller and sanding pad, Contact roller is rubber-coated, Pneumatic activation of contact roller, Electronic segmented sanding pad, Digital display for sanding height, Gusdpfexnm Rcsx Ah Djh Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 Abrasive belt size: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min. Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port diameter: 2x200 mm Motor power: 18.5 kW Motor power (second motor): 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Stanje: novo, Tukaj vam ponujamo precizne vretenaste ležaje. Godpfx Asw Trcvsh Djuh 2x B71911-C-2RSD-T-P4S-UL 2x B71914-C-T-P4S-UL

Stanje: novo, - new - - The edge sanding machine type SK-1 is ideally suited for sanding large, curved, and straight workpiece edges. - The main application area of the SK-1 is the sanding of radii and shaped parts. - The sanding unit, with its radii of 80 mm, 300 mm, and 1000 mm, also features a straight sanding surface. - The pneumatically height-adjustable, stepless oscillation and the heavy cast iron sanding unit ensure full utilization of the sanding belt and precise sanding results. - The generously designed all-round worktable with integrated extraction allows for easy and ergonomic operation. - The SK-1 is equipped with pneumatic unit oscillation and pneumatic belt tensioning. Technical data: Motor power: 4 kW Gusdpfx Ahjvyupuo Dsh Belt speed: 15 m/sec Oscillation stroke: 30–150 mm Belt length: 2700 mm Belt width: 150 mm Table size: 2000 × 1000 mm Space requirement: 3000 × 1500 mm Extraction: 1 x 140 mm Weight: approx. 560 kg Item no. 1020-200000

Stanje: dober (rabljeno), Offered for sale is an external cylindrical grinding machine from VEB Werkzeugmaschinenbau, model SU 200/1x800. The machine is fully operational and ready for immediate use. Technical specifications: - Grinding diameter: 200 mm - Grinding length: 800 mm - Swing diameter: approx. 160 mm - Workhead speed: 200–1000 rpm - Workhead taper: MK2 - Grinding wheel diameter: approx. 330 mm - Table size: 900 x 200 mm - Dimensions: 3050 x 1300 x 1430 mm - Weight: 4.6 t Upon request and at additional cost, loading and transportation (Europe-wide) can be organized. All prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales Guedpsrdf Hgsfx Ah Deh PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Gsdpfx Ahov Sk Nnj Djuh Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: rabljeno, Leto izdelave: 2021, Ser. št. 11479, krmiljenje, proizvajalec Siemens, tip Sinumerik 840Dsl, obdelovanec Ø 200 mm, dolžina obdelovanca 100 mm, glavno vreteno 18 kW, hitrost vrtenja 3.000 min⁻¹, 12-postojni revolver za orodja, zunanje brusilno vreteno TSE 200, enota za oblačenje, transportni sistem za obdelovance, 21 palet nosilcev obdelovancev, transporter za ostružke, odsesavanje emulzijskega olja, 2x sistem za dovod hladilno-mazalnega sredstva 8/30 bar, papirni trakasti filter, magnetni predločni separator, in-line merjenje obdelovanca, vmesnik za manipulačni sistem Siemens Profinet, dvobatni vpenjalni valj, prirubnični vpenjalni trn +++ Pozor: Stroj je del spletne dražbe! +++ Godpfxewzvnys Ah Douh

Stanje: dober (rabljeno), Leto izdelave: 1988, Ref. št.: 10396 Proizvajalec: KELLENBERGER Tip: 600 U - št. 40 Leto izdelave: 1988 Način krmiljenja: konvencionalen Krmiljenje: N/A Skladiščna lokacija: Halberstadt Država izvora: Švica Razdalja med središči: 600 mm Višina središč (standardno): 125 mm Višina središč z dvignjenimi delovnimi bloki glave in konjička: 175 - 250 mm Gujdpoxmd R Rofx Ah Deh Maks. nihajni premer z dvignjenimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratku mize: 0 - 5 s Premer / širina / luknja: 250 x 13 x 76 mm Hitrosti vretena brusilnega koluta: 1500/1700/2200/3600 Brusilna glava vrtljiva: 360° Prečni pomik brusilne glave: 285 mm Hitro premikanje brusilne glave naprej/nazaj: 40 mm Prekinjeno podajanje na obrat mize: 0,001 - 0,03 mm/Ø Mikronastavitev podajanja, 1 delitev številčnice: 0,001 mm / Ø Brezstopenjsko nastavljive delovne hitrosti (normalna / posebna): 20-400/10-400 Maks. dolžina brušenja: 900 mm

Stanje: dober (rabljeno), 1 x Edge Grinding Machine Manufacturer: Christen Model: KB 2 Technical Specifications: Working Area: Rule length: 370 mm Sheet thickness: 0 to 2 mm Maximum edge clearance with fully opened stop: 3 mm Speed: 3400 rpm Grinding wheels: 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: Gedpfx Ajfwx Dajh Djuh 2 x grinding wheels with flange 1 x additional flange 1 x wrench for grinding wheel change The machine can be inspected under power.

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry Gjdpet Tqy Esfx Ah Deuh - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, teža obdelovanca (maks.): 300 kg, dolžina brušenja: 2.000 mm, Used cylindrical grinding machine TOS BHU 32A/2000, grinding diameter 320 mm, grinding length 2,000 mm, without electrical components, in need of repair, ideal for companies specializing in complete overhauls. Guedpfx Ahjwbiw Is Doh

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Gjdohqb Rcopfx Ah Douh Location: In stock at 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 455 mm, premer brušenja: 300 mm, teža obdelovanca med konicami: 150.000 g, vrsta vhodnega toka: trifazni, premer obdelovanca med konicama: 300 mm, širina brusilnega kolesa: 75 mm, največja hitrost vretena: 500 obr/min, hitrost vretena (min.): 10 obr/min, moč motorja brusilnega vretena: 7.500 W, skupna masa: 5.600 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Max. workpiece diameter to be ground: 300 mm Max. workpiece weight between centers: 150 kg Gedpfx Ahsxma Ifj Douh Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Infinitely variable Peripheral speed: 45 m/sec Grinding spindle head (X-axis): Max. travel 300 mm Swivel angle workpiece table: Not swivelable Workpiece table (Z-axis): Travel: 1,150 mm Swivel range: 0 – 10 ° Workpiece spindle head: Fixed/rotating version Spindle taper: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Grinding spindle swivel angle: Not swivelable Tailstock type: With manual fine adjustment of taper Quill travel: 30 mm Morse taper: MT 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x Width x Height approx. 4243 x 2490 x 1860 mm Machine weight approx. 5,600 kg Standard equipment Complete FANUC keyboard with radius compensation for creating ISO programs Shop floor programming: Graphical software for grinding and dressing cycles with teaching function GAP eliminator Shoulder positioning Lamp Documentation Leveling screws and base plates Accessories Marposs measuring control Ø 8 – 92 mm Various flanges Various grinding wheels Band filter All information is subject to change and prior sale reserved. Prices: plus VAT Terms of payment: net, payment before loading.

Stanje: dober (rabljeno), Leto izdelave: 1990, Ref. No.: 10301 Manufacturer: TITAN Model: RU 350 x 1-1500 Gedpfxexmd Rwo Ah Dsuh Year of manufacture: 1990 Control type: Conventional Location: Halberstadt Country of origin: USA Max. grinding length: 1,500 mm Max. workpiece weight: 300 kg Grinding diameter: 350 mm Grinding wheel diameter max.: 280–500 mm Grinding wheel width: 80–100 mm

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 20039, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Gujdpfx Ahjxma I Ee Djh For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Number of sanding units: 2 pcs. Sanding width: 190 mm Max. sanding height: 4–180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Gsdpjv D Rg Dsfx Ah Deuh Machine will be inspected! Manufacturer's description: ----- Compact design constructed according to modern requirements. Quiet and vibration-free operation due to a torsion-resistant, stable machine housing and special insulation. Safety features comply with EC Machinery Directive and are certified as "dust-tested." Offset sanding units with large-diameter tension rollers for effective heat dissipation and stable sanding belt guidance. Sanding units feature forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Ambient dust extraction at the large tension rollers. Integrated sanding belt air blow-off system for increased belt lifetime. Integrated brush and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized sanding thickness adjustment of the upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe optimally balanced to sanding belt grain load. Hardened and ground sanding rollers. Maintenance- and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, effective heat dissipation, and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Sanding belt change via pneumatically controlled belt release. Adjustable belt tracking during belt changes. Electropneumatic air pressure monitoring with visual fault indicator. Automatic machine stop in case of belt breakage and entry safety system with integrated wood thickness control. Visual fault indicators on the control panel. Feed mechanism and proven, calibrated slip- and traction-proof conveyor belts on precision-ground tables and spring-loaded pressure rollers. Cardan shaft drive for uniform wood feed. Continuously variable feed speed. Chip removal adjustment below via precision lead screw with scale ring indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: sanding unit and brushing device (top), sanding unit and brushing device (bottom), workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Built-in control and operation unit in the machine housing with lockable main switch. All motors electrically protected against overload. Technical data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: steplessly adjustable 5–25 m/min Sanding belt size: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h at 20–25 m/sec Extraction connection: 2 x 160 mm diameter on top of the machine housing

Stanje: dober (rabljeno), Leto izdelave: 1997, Proizvajalec: MABO Model: BABY S.A.S. BABY 80 Tip stroja: Robna brusilka Tehnični podatki Razdalja med valji: 1.050 mm Največja širina brusnega traku: 120 mm Število hitrosti: 1 Glavni motor: 1,1 kW Brusni trak v vodoravni legi Nastavljiv brusni trak Gjdpfx Ahsxgvcxo Deuh Navpično navzgor Teža cca: 95 kg Prostor za namestitev (dolžina): 2,65 m Prostor za namestitev (širina): 0,55 m Prostor za namestitev (višina): 1,1 m Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: rabljeno, Oscillation: yes / no Heavy-duty sanding device: yes / no Veneer sanding device: yes / no Tiltable up to: yes Motor power: 2.2 kW Table size: 1000 x 350 mm Sanding width: 200 mm Weight: 300 kg Edge sanding machine Langzauner LZK 3/2, BB 200 ----- Technical manufacturer's description: Table width: 345 mm Table length: 1000 mm Max. sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Round sanding support: yes Oscillation: yes Gjdswzmuwspfx Ah Deuh Table height adjustment: manual Sanding belt tiltable: yes Space required (length): 1800 mm Space required (width): 900 mm ----- Price of the above-mentioned machine upon request! (Technical data according to manufacturer – subject to change and without guarantee!) All prices quoted are net, plus statutory VAT. No original photos available yet, image from brochure of the same model.

Stanje: zelo dobro (rabljeno), Double Bench Grinder Rema / School Machine Wheel dimensions (in mm): 300/40/76 Gujdpfx Aehaf Ndjh Deh Power (in kW): 1.8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Protective shields Location: In stock at 54634 Bitburg - immediately available -

Stanje: rabljeno, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L x W x H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 Double-sided four-belt solid wood sanding machine for sanding solid wood, such as window scantlings, etc. Heavy-duty, premium build with innovative details. Suitable for continuous heavy-duty operation with higher removal rates. - Sequentially arranged sanding units for coarse sanding, fine sanding, and finishing, each from above and below 1. Belt sanding unit with heavy-duty steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer belt life - Forced-guided, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Chip removal adjustment at the bottom via precision lead screw with indicator ring (resolution 0.1mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change with pneumatic belt release in seconds - Adjustable belt tracking during belt change - Electropneumatic air pressure monitoring - In-feed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded, finely adjustable hold-down rollers - Cardan shaft drive for smooth and uniform workpiece transport - Feed gearbox motor with stepless speed control from 4 to 20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW Gusdpevu Hgbsfx Ah Deh - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc: 2,740 mm), 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE certified Equipped with the following options: - Sanding belt blow-off for 4-belt Arranged by nozzles directly at the radii of the tension rollers within the extraction, can be switched on separately - Disc unit for fiber removal - Two flap wheel sanding discs with 200 mm diameter (max. sanding width 180 mm) - Side ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Holzkraft robni brusilni stroj Tip: KSO 1500 s podnožjem Leto izdelave: 2020, odlično stanje Širina traku: 150 mm Gujdpfx Aoxgvcfeh Deh Dolžina traku: 2270 mm Naprava za brušenje furnirja: ne Oscilacija: da Premer valjev: 38 mm, 50 mm, 76 mm Brusilna enota nagibna: da / 90° - 0° Delovna miza: 680 mm x 310 mm Dodatna miza: 260 x 260 mm Hitrost traku: 16 m/s Priključek za odsesavanje: 100 mm x 2 Moč motorja: 1,5 kW / 400 V Dolžina stroja: 1350 mm Širina stroja: 585 mm Teža: 162 kg Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Guodpfx Ahsvnv Tqs Deh Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...

Stanje: novo, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 2–180 mm LÖWER double-sided sanding machine DSM 2000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal. - Offset sanding and finishing units located above and below - Direct drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area Gsdpfx Ajvu Hdteh Deuh - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large-capacity dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety device via contact roller in case of oversized workpieces - Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and consistent workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the workpiece infeed side - Automatic workpiece thickness detection (no prior measurement necessary) - Digital thickness display (resolution 0.1 mm) using modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE compliant ----- Base price of the machine on request! ----- Optional accessories for additional cost: Infinitely variable feed 4–20 m/min for speed adjustment to ...

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) Godjvnv Uhjpfx Ah Douh - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Special accessories at extra charge: Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- ...