Nizke Temperature Vitrino nakup rabljenega (7.455)

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Dwodpswc Nvgsfx Ag Njc Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Type: ST2K320/45 Water-Cooled Shock Test System Operating Climate Range Temperatures in Upper Test Chamber: Dwjdpfjtqcu Ejx Ag Nec Temperature range: +40 °C to +180 °C Temperatures in Lower Test Chamber: Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Weight (Chamber): approx. 850 kg For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, all information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Autotherm Type: Autotherm Tempering Unit AW 95-12/VK/E Autotherm Tempering Unit AW95-12_VK for water/glycol temperature control (completely overhauled) Autotherm Temperature Control Unit AW: For highly precise temperature control of water Autotherm tempering units are used in various industries, research, and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers, and heating chambers with tempered water, to maintain them at the desired temperature with high precision. Areas of application: - Mechanical engineering, e.g. solar and wind energy industry, textile industry Dwsdpfouigrzox Ag Njc - Plastics processing - Chemical and pharmaceutical industry - Paper manufacturing - Medical technology - Food industry - Research Tempering Unit Autotherm AKW AW95-12/VK Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power supply: 400 Volt / 50 Hz 13400 Watt / 19.6 A / 5.1 bar Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data. All specifications without guarantee!) For further questions, we will be happy to assist you by phone.

Stanje: dober (rabljeno), Vötsch Model: VTS 7011-5 Heraeus Vötsch Temperature Chamber, Water-Cooled Test Chamber Volume: 110 Litres Test Chamber Dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External Dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Dodpfxsum Uzme Ag Nowc Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.3 to 1 K Spatial Temperature Deviation: ± 0.5 to ± 2 K Temperature Change Rate – Cooling: 6 K/min Temperature Change Rate – Heating: 10 K/min Refrigerants: R-404 A / R 23 Power Supply: 3/N/PE AC 400V±10% 50Hz Nominal Power: 7.5 kW Nominal Current: 13 A Weight: 360 kg Important Information for Buyers’ Safety! The following procedures are carried out in advance on every chamber we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data!) For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber, air-cooled The chamber features an option for an external test box including an external sensor connection, therefore it can also be used as an external temperature control unit. Temperature range: -20°C to +140°C Temperature stability over time: ±0.1°C to ±0.3°C External dimensions: width 860 mm x depth 1500 mm x height 2100 mm Test chamber internal dimensions: width 601 mm x depth 545 mm x height 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Nominal current: 10.0 (max. 17) A Nominal power: 5.2 (max. 9.0) kW Net weight: 735 kg Refrigerants: R404A / R23 Type: TTRE 2001S For your security as a buyer, please note the following information! Dwjdpfxonyh T Ss Ag Nsc For all test chambers we offer, the following steps are carried out in advance: 1. Functional check and replacement of necessary components 2. If required, refill with compliant refrigerant according to legislation 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data may be subject to changes and errors!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32 control unit, air-cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 liters Test chamber internal dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Fuse (customer side): 16 A slow-blow Dsdpfxeq U Sdno Ag Nowc Sound pressure level approx. measured at 1m distance from the front, 1m height: 58 dB(A) Data for temperature testing: Temperature range: -72 to +180°C Temporal temperature deviation at the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important information for you as the buyer! The following points are carried out in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Feedthrough included as standard R1: NW 125 mm L1: NW 50 mm Dimensions: Internal chamber dimensions (W x D x H): 1100 mm x 950 mm x 950 mm External dimensions (W x D x H): 1390 mm x 1525 mm x 1995 mm Maximum distributed load (test chamber floor): 150 kg Per shelf: 50 kg Dedpfxep Dun Ue Ag Nswc Total shelf load: 100 kg Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission (for water-cooled cabinets): max. heat output to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 Important Safety Information for Buyers: The following procedures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) If you have further questions, we are happy to provide information by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min Djdpfx Aotz Rqmjg Njwc - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature Dwsdpfx Agjvba Rao Noc 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Dwjdpfxsmn Rcij Ag Njc Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), CTS Model: TSR-30/1000 Water-cooled The CTS cabinet series type designation is composed as follows: Example: Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress Screening 3) R stands for: External Conditioning 4) -30 means: minimum temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical specifications: A) TSR-30/1000 base unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Testing: Temperature range: -40°C to +180°C Final temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Heat dissipation: approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to ambient temperature of +25°C, rated voltage 400V, with no test samples, no heat dissipation, and no additional equipment. Air flow volume approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to a customer-supplied external test chamber Temperature Testing: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with closed-loop: Heating: 4.0 K/min Cooling: 4.0 K/min within the range from +150°C to -10°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test samples, no heat dissipation, and no additional equipment, measured with closed-loop. Note: The customer-supplied external test chamber must be completely sealed and properly insulated; any leadthroughs must be optimally sealed by the customer. Dimensions: Test volume: 1000 liters Air recirculation port: Ø 200 mm Test chamber dimensions: Height 900 mm, Width 1000 mm, Depth 1100 mm External dimensions: Height 1950 mm, Width 1270 mm, Depth 2245 mm Technical design: Refrigeration unit: Water-cooled, low-noise fully hermetic Infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully openable door, hinge on the left, one-hand operation, lockable. Insert rack: Stainless steel, support surface 970 x 980 mm Maximum load per rack: 35 kg Maximum total load with full rack installation: 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: Dedpfx Ajrivfceg Njwc - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 13.3 kW Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg Your safety as buyer – the following is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of supply: (see picture) (Specifications may change or contain errors. Subject to alteration!) If you have further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Dwodpfjun Rv Nsx Ag Njc Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69dB (A) Side ports: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R23 Weight: approx. 570 kg Important safety information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run, which is monitored using calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical details are subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled Dedpfx Aolgux Ajg Nswc Specification: Temperature range hot chamber: +60°C … +220°C Temperature range cold chamber: -10°C … -80°C Transfer time hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and additional data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm / with approx. 1155 mm Basket dimensions (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber load: 20 kg Maximum floor load in test chamber: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum main fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cooling cascade: water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information not binding!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Thermal Shock Test Chamber We are offering you a thermal shock test chamber. Weiss Thermal Shock Test Chamber, water-cooled Specifications: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Transition between hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm, with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber loading: 20 kg Maximum load on test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum pre-fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 18.7 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Djdpfxslmkn Te Ag Nowc Scope of delivery: (see image) (Technical data subject to modifications and errors!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Dwsdpfx Aeir D U Djg Noc Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS temperature test chamber We offer you a CTS temperature test chamber. Water-cooled CTS temperature test chamber Technical specifications: Temperature operating range Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature constancy over time: ≤± 0.3 K Dimensions: Test volume: 600 liters Internal chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Type: T-70/600 Important information for your security as a buyer! Dwedpfxsichkvs Ag Nec The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical data and information are subject to change and errors!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature shock test chamber with a usable volume of 100 liters, suitable for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design 2 stainless steel test specimen baskets Cable feedthrough Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Dwodpfxen Smtmo Ag Nec Scope of delivery: (See picture) (Technical changes and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering you a temperature shock test chamber. Dodom Ak H Hepfx Ag Njwc Weiss Temperature Shock Test Chamber, water-cooled Specification: Temperature range hot chamber: +60°C to +220°C Temperature range cold chamber: -10°C to -80°C Transfer between hot/cold chamber: 10 sec. Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without/with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without/with test chamber door): without approx. 900 mm / with approx. 1155 mm Internal basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Max. chamber load: 20 kg Max. floor load test chamber: 20 kg Cooling water pressure: min. 2 to max. 6 bar Max. main fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) For further questions, we are happy to answer your call.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range of -80°C to +250°C Reproducible test results and perfect integration of the temperature chamber into the testing system. Temperature chambers: Width 600 mm x Height 1000 mm Temperature chamber for the AllroundLine Cooling via LN2 (liquid nitrogen) (-80°C connection external, not included) Mains voltage: 400/230 V, 16A, 3N~ 50/60Hz Dwodpfxolguwwe Ag Njc Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Dodpfx Ageg Sr Egs Newc CTS Temperature Test Chamber, Air-Cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Design: Floor-standing unit Temperature operating range: Temperature range: -40°C to +180°C Cooling rate: 4.0 K/min Heating rate: 3.0 K/min Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser: Air-cooled Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications and technical details subject to change or error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3,000 W Heat compensation -20°C: 3,000 W Test chamber internal dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fuse (customer side): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69 dB(A) Side cable ports: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Model: VTS 7018-5 Dodpfshh H Hisx Ag Nswc For your safety as a buyer, please note the following information! The following work is carried out on all our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharge with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: Used Scope of delivery: (See photo) (Specifications subject to change or error!) Should you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), RS simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x Height 520 mm x Depth 500 mm External dimensions: Width 820 mm x Height 1750 mm x Depth 1300 mm Power consumption: 13.5 A Supply voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Model: TS 150/45 (50) Dodegl Acrjpfx Ag Nowc Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data, all information is without guarantee!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber Air-cooled We are offering a Weiss temperature chamber. Weiss temperature chamber with S!MCON / 32 control system Test chamber volume: approx. 195 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 450 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Dwedpfxsgmhrfo Ag Nec Data for temperature testing: Temperature range: -42 to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404A 2.5 kg Weight: 490 kg Type: WT3 - 180/40 For your safety as a buyer, please note the following information: The following measures are carried out on the chambers we offer prior to sale: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored using calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change, errors excepted!) We are happy to answer further questions by phone. Written orders can be placed via email or fax.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) Dedpou U Ixmofx Ag Nswc (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: dober (rabljeno), Espec Model: TSD-100 - 100-litre usable chamber volume for larger test specimens up to 30 kg - Compliant with all common international standards Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrost Overtemperature protection Operating hours counter Dwodjt I S Rhjpfx Ag Nec Mobile version 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Condition: used Scope of supply: (as shown in pictures) (Specifications are subject to change and errors excepted!) For further questions, we are happy to assist you by phone.