Varilni stroji nakup rabljenega (32)

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Cjlhcdweyqr Sxe Degp

Leto izdelave: 2007, obratovalne ure: 9.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 56127, Rezanje nosilca stekla za PVC stavbno pohištvo, s sočasnim parnim rezanjem, vključno z desnim merilnim podstavkom. Cgslhcdwjyq Rkmj Dop

Leto izdelave: 2007, obratovalne ure: 800 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 01277, Stroj v popolnem stanju, nagibna glava za varjenje izven kvadrata od 0 do 90°. Cgjlhsyq N D Secdw Dop

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), delovna širina: 620 mm, številka stroja/vozila: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON Drive system: hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable heating element area: Width 600 mm x Depth 400 mm Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. part height upper: 350 mm Cslhcsykvdledw Degp - Max. part height lower: 350 mm (height combinations possible, depending on contour) - Max. operating temperature for contact process: up to 400°C. The machine's modular frame design allows for easy modification. Side doors and the front door in the welding area can be easily opened (for simple retooling). The automatic safety lift door ensures a high level of operator safety. Temperature controllers integrated in the control panel feature actual/target value displays. The control unit is a Siemens PLC (S7-300 controller). The heating elements are equipped with temperature sensors for regulation and serve as a safety cut-off in case of overheating. Pin systems on the tool mounting surfaces allow for repeatable positioning. Advantages of Heating Element Welding Technology: - Reliable welding of workpieces with thin or varying wall thicknesses. - Low scrap rate thanks to precision and reproducible welds. - Sensitive parts can be welded due to precise time, temperature and force control. - Nearly all thermoplastics can be welded using this process. - Different types of plastics can also be joined together (compatibility must be checked). Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 (cables) of 6 mm² each - Required pneumatic connection: 6 bar Machine Dimensions: - Width: approx. 1.22 m - Width with control panel: approx. 1.8 m - Depth: approx. 2.1 m - Depth with control panel: approx. 2.6 m - Height: approx. 2.4 m - Height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 300 h, 3x VE20 Microbond SCI 3x novo Cgelhcdjr Rdd Nsw Dop Deli so bile v uporabi približno 200–300 ur Sistem MICROBOND CSI, ki ga sestavljajo podajalna enota, krmiljenje in visokozmogljiv generator, zagotavlja stalno visoko kakovost varjenja. Robusten in hkrati zelo natančen mehanizem omogoča ohranjanje stalne reže zaradi patentiranega krmiljenja reže MicrogapControl. Krmiljenje in vizualizacijo tega neprekinjenega postopka spajanja prevzema upravljalna enota MICROBOND. Konstantni izhod amplitude in visoke stalne ultrazvočne zmogljivosti omogočajo procesne hitrosti do 800 m/min.

Leto izdelave: 2007, stanje: rabljeno, Grelni element varilnega stroja KVT MT 01-HAT SO, z vrtljivo mizo, letnik: 2007 - 0 delovnih ur, cena: 4.800 €, kontaktna oseba: gospod Rainer Eckerle Cgslhcjcquugsdw Dop

Stanje: rabljeno, Laserna varilna linija Föhrenbach Prav tako vas obveščam, da je laser za prevoz preko morja shranjen v dveh lesenih zabojih. Tehnični listi so na voljo v formatu PDF. Celoten paket podatkov (4 registratorji). Celhcdwsxbcwxs Dogp Kot že rečeno, ker gre za "posebni stroj", standardne rešitve tu niso na voljo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ultrazvočni varilni stroj BRANSON Mod. 8.200 Cjlhcdoylpqbjw Dogp

Leto izdelave: 2023, stanje: rabljeno, Ponujamo rabljeno ultrazvočno varilno postajo Weber Ultrasonics Saphir Digital Manual Station, letnik 2023. S to napravo je bilo izdelanih približno 92.500 enot. Celhcdjyimqwow Dogp Sonotroda TR35Ti Frekvenca: 35kHz Moč: 1000W 230V AC Sistem za merjenje hoda: 26,88 mm Minimalna sila: 34 N Maksimalna sila: 500 N Nizka vrednost: 0 N Nizek odmik: 0 N Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Na voljo je varilni stroj Pfaff, vključno z valjčno škarjo Kuris in odvitjem MK. 1) Varilni stroj Pfaff 8309. 2) Valjčna škarja Kuris BOM 101. 3) Odvijalna naprava MK Šivalni tehnični sistemi. Dokumentacija je na voljo. Ogled na lokaciji je možen. Postrojenje je razstavljeno in pripravljeno za nakladanje. Cjlhcsw I E Disdw Djgp

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Number of heating cartridges: 24, heating cartridge diameter and length: 12.5 mm / 200 mm, power: 630 W, 230 V, including resistance thermometer type PT100, heating time to 350°: 40 min. Dimensions X/Y/Z: 1900 mm / 2100 mm / 3040 mm, weight: approx. 2200 kg. Documentation available. Cjlhcetp Nacedw Degp

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), An ultrasonic welding system with nine Telsonic ultrasonic units, an enclosure, nine generators, and documentation is available. Control system: Siemens SIMATIC PANEL. An on-site inspection is possible. Cslheuy T Nqjcdw Degp

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), An ultrasonic welding system is available comprising two Telsonic TSP-3000-1P units, enclosure, generators, and documentation. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. An on-site inspection is possible. Celhouy T Ndocdw Degp

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Welding force: 2500 N, table dimensions: 420 x 415 mm, height adjustment: 250 mm, stroke: 100 mm, control: Telsonic MPS-4, connected load: 4000 W, length: 459 mm, width: 854 mm, height: 1315 mm, weight: 130 kg. Equipped with SICK C4000 safety light curtains, enclosure, and documentation. On-site inspection possible. Cgelhcdjuy T I Hjw Dop

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, completely overhauled in 2007. Documentation available. On-site inspection possible. Cgelhcdwewal H Ne Djp

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) from Hürner are available. Years of manufacture: 2x 2016 and 1x 2018. Working range OD: 40 mm - 160 mm. Power: 2.85 kW. Reduction inserts: 40/50/63/75/90/110/125/140 mm. Weight: approx. 80 kg. Documentation is available. An on-site inspection is possible. Cgjljviv Azshcdw Dsp

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Stroke: 100 mm, max. electrode spacing: 230 mm, electrode force: 20 kN, control system: Siemens S7-1500, complete with documentation, has seen little use. Cslholp N Eyscdw Degp

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dve enaki stroji, vključno z dokumentacijo. Cgoljm Rg R Aehcdw Dsp

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Ultrasonic Welding System Manufacturer: KLN Stock number: Year of manufacture: 2013 and 2009 respectively Model: PXO, serial number P600031440 MXO, serial number M60413293 Features: The system consists of two stations. Single station sale possible. Cgolhcovxppaedw Dsp Price: EUR 5,000 per station Price incl. 19% VAT: EUR 5,950 per station

Leto izdelave: 2025, obratovalne ure: 50 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schtec WD 720 Double-Head Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in a single operation and is suitable for variable angles from 60° to 180°. Thanks to its highly precise weld tolerance of 0.2 mm, the WD 720 delivers strong, seamless and aesthetically perfect joints – suitable for both white and coloured profiles. Key features: - Simultaneous welding of two corners - Variable welding options between 60° – 180° - Can also be used as a single-head welding machine - 0.2 mm weld seam limitation (white and coloured profiles) - Manual positioning of the movable head - Pneumatic brake system for stable fixation - Individually adjustable heating, temperature, and time parameters - Digital touchscreen control panel - Special heating plates for even heat distribution - Easy cleaning system for the heating plates - Durable Teflon system for a longer service life - Specially designed mould system for more efficient operation Application The Schtec WD 720 is ideal for medium-sized manufacturing companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly controls, and high weld quality makes this machine suitable for serial frame production. Colhcdeykkx Dow Djgp

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emerson Branson ultrazvočni generator / napajalnik Proizvajalec: Emerson Branson Model: DCX 4000 H01 Tip naprave: Ultrazvočni generator / napajalnik Ultrazvočna frekvenca: 20–24 kHz Maksimalna izhodna moč: 4.000 W (4 kW) Omrežni priključek: 200–240 V AC Letnik: 2022 Industrijska izvedba, CE-skladno Stanje: Zelo dobro, preizkušeno, pripravljeno za uporabo. Funkcija in uporaba: Proizvodnja in regulacija visokofrekvenčne ultrazvočne energije Delovanje v industrijskih ultrazvočnih varilnih sistemih Cgolhcdwoya Ap He Djp Primeren za varjenje plastike ter tankih kovinskih materialov Namenjen za neprekinjeno delovanje v proizvodnih okoljih. Tipična uporaba v avtomatiziranih in proizvodnih linijah Primeren kot nadomestna naprava, retrofit rešitev ali za strojegradnjo Priključni kabel vključen v obseg dobave

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Varilni aparat za sterilne cevi Terumo SCD IIB, kataloška številka 72508, zagotavlja zanesljive in visokokakovostne varjene spoje za sterilne cevne povezave, za cikel varjenja potrebuje le 30 sekund, je kompakten in prenosen, zahteva minimalno tehnično usposabljanje ter ga je mogoče brez težav vključiti v obstoječe procese. Zahteve za cevi: PVC cevi z nazivnim zunanjim premerom 5,46 mm (0,215 palca) in debelino stene 0,84 mm (0,033 palca) ali C-Flex cevi z nazivnim zunanjim premerom 6,35 mm (0,25 palca) in nazivnim notranjim premerom 3,18 mm (0,125 palca). V dobrem delovnem stanju. Oglejte si tudi naše ostale oglase. Cgjlhcouyu N Eodw Dsp

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, High-Frequency Generator Schirmacher HS25.000 The HF generator is used to generate a high-frequency electromagnetic field, enabling the connected HF production equipment to: - Heat and weld thermoplastic plastics, - Dry paper, textiles, wood, and similar materials, or - Heat plastic granulates, rubber, and more. Technical Data Operating frequency: 27.12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, connected load 46 kVA Control system: Generator: Siemens S7 PLC / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9.1 kV, no load 10.4 kV Anode current: Full load 3,800 mA, no load 800 mA Dimensions (WxDxH): 1,200 x 1,200 x 2,000 mm Commercial Information Condition: Brand new machine, ex delivery warehouse – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: In stock, more than one unit available Cgjlhex U Trpscdw Dsp Warranty: On request Generator Highlights Quick commissioning due to modular design – flexible integration into various production processes and compatibility with different tools. High-precision control – exact power output and consistently high welding results. Ultra-dynamic HF regulation prevents flashovers during the welding process extremely quickly. Electrode protection – integrated in the generator to safeguard machine and tooling. Automation-ready – suitable for use in automated manufacturing processes, with capability for integration into existing systems. Inspection possible by appointment.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: N SERIE: 99 1220, Hot air Polypropylene box seam welder. manually fed polypropylene welding machine. Colhcow Elrpedw Djgp

Leto izdelave: 2010, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Branson ultrazvučni zavarivač koristi se za spajanje plastičnih dijelova bez upotrebe dodatnog materijala za spajanje. Frekvencija 20 kHz, snaga 1000–2000 W, napon 230 V AC, hod 100 mm. Dimenzije (D x Š x V): 400 x 500 x 1200 mm. Cgelhcsvt Sc Esdw Dep