Ultrazvočna varilna naprava

BRANSON 8.200

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Premer struženja: 430 mm, maks. premer nad posteljo: 760 mm, maks. dolžina struženja: 860 mm, konjična razdalja: 990 mm, pomik X/Y: 280 mm/860 mm, hitrost vrtenja: 3400 obr/min, premer glave: 12 palcev, orodna mesta: 12. Dimenzije stroja X/Y/Z: ca. 3800 mm/2000 mm/1900 mm, teža: ca. 6500 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Njdpfxey Hvp Ij Anpjlh

Leto izdelave: 1981, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Nljdpfx Aou Ttf Nsnpoh Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] Nledouhav Dspfx Anpeh - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Rated torque (100%): 8 Nm Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Nsdjwv Hnmopfx Anpslh Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Leto izdelave: 1992, stanje: pripravljen za uporabo (rabljen), Working length: 4300 mm, pressing force: 2000 kN, connected load: 15 kW, weight: 18 t, including bending tools. Nljdei Dx Sbepfx Anpeh

Stanje: kot nova (razstavni stroj), PFAFF 8320 - 111/101 dolgo-ročna izvedba s mizo Nsdpfx Anjxa D Hrjpslh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 531 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.016 mm, dolžina pomika po osi Y: 660 mm, dolžina podajanja os Z: 635 mm, model krmilnika: NGC, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Stroji serije Haas VM so visokozmogljivi vertikalni obdelovalni centri (VMC), ki zagotavljajo natančnost, togost in toplotno stabilnost, ki so potrebne za izdelavo kalupov, orodij in matric ter v drugih industrijskih panogah, kjer je potrebna visoka natančnost. Vsak stroj ima veliko delovno površino, večnamensko mizo za pritrditev in vreteno z neposrednim pogonom, ki dosega 12.000 vrtljajev na minuto. Med standardno opremo spadajo: Haasov nadzorni sistem za visoke hitrosti z napredno predvidevalno funkcijo, stranski menjalnik orodij, programirljiva šoba za hlajenje, avtomatska pištola za pihanje zraka in še mnogo več. Nsdpfxjzr U I De Anpolh Vreteno z neposrednim pogonom Stranski menjalnik orodij Večnamenska miza za pritrditev Programska oprema za obdelavo pri visokih hitrostih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, CNC Fanuc 18i - MB TRAVELS: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm Distance from spindle nose to table surface: 50 - 750 mm Distance from spindle nose to table center: 150 - 900 mm TABLE: Nljdpfx Anevw Uyujpeh Pallet size: 500 x 500 mm Table load capacity: 500 kg Pallet surface: 24 – M16 x Pitch 2.0 Table indexing angle: 1° SPINDLE: Spindle speed: 14,000 rpm Spindle taper: ISO 40 Max spindle torque (25% duty cycle): 220.5 Nm FEEDS: Rapid traverse (X, Y, Z): 60 m/min Cutting feed rate: 30,000 mm/min TOOL CHANGER: Tool holder type: MAS403 BT40 Magazine capacity: 120 tools Max tool length: 400 mm Max tool weight: 10 kg Tool change time (tool-to-tool): 1 sec Tool change time (chip-to-chip): 3.5 sec AUTOMATIC PALLET CHANGER: Number of pallets: 7 Type: Rotary shuttle Pallet change time: 7.5 sec Pallet rotation at loading station: 90° MOTORS: Spindle motor (30 min): 18.5 / 22 kW Axis motors (X, Y, Z, B): 7.0/7.0/7.0/2.7 kW MACHINE DIMENSIONS: Height: 3,000 mm Floor space: 5,600 x 2,700 mm Machine weight: 15,000 kg Equipped with: • High-pressure through-spindle coolant system 35 bar • Chip conveyor • Instruction manuals and CE declaration

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Wirbelstromabscheider der Magnetic-Serie werden hauptsächlich in der Abfallrecyclingindustrie eingesetzt. Der Einsatz von Wirbelströmen ermöglicht die Rückgewinnung von Nichteisenmetallen (nicht magnetisch) aus losem Abfall, wie Aluminium, Kupfer, Messing usw. Die WPS-Abscheider zeichnen sich durch eine hohe Abscheidegenauigkeit aus, dank der eigenen Lösungen von ZŁOMIARZE, was eine hohe Rentabilität des Abfallrecyclings garantiert. WPS-Abscheider werden eingesetzt zur Rückgewinnung von: - Nichteisenmetallen aus dem Recycling von Elektronikschrott - Nichteisenmetallen aus dem Kfz-Recycling - Metallen aus Gießereiabfällen - Aluminium in Glasrecyclingprozessen Nedpfju Dg Uhox Anpolh - Nichteisenmetallen aus Stahlabfällen - Nichteisenmetallen aus Siedlungsabfällen Funktionsbeschreibung: Das vom Schwingförderer zugeführte Material gelangt auf das Förderband des Wirbelstromabscheiders. Das Förderband befördert das Material zum Hochgeschwindigkeits-Magnetrotor. Der Magnetrotor erzeugt ein hochfrequentes Magnetfeld durch ein optimiertes System alternierender Magnetfelder. Das variable Magnetfeld induziert Wirbelströme in Metallen. Diese erzeugen entgegengesetzte Magnetfelder und führen dazu, dass Buntmetalle aus dem Materialstrom herausgeschleudert werden. Ein am Ende des Abscheiders montierter Trenner sorgt für die Fraktionierung des Materials. Der zentrale Magnetrotor wurde so konstruiert, dass er auch kleinste Materialien bewältigt und ermöglicht die Rückgewinnung von Partikeln bis zu einer Größe von 1 mm. Wir bieten auch größere Ausführungen von Wirbelstromabscheidern an – Katalog in den Dokumenten.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Okuma GENOS L200E-MY CNC Lathe Technical specifications Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 Ph Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit resistance: 2.5 kA Maximum turning diameter: Ø 200 mm Maximum turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight with single support: 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed ranges: stepless Spindle speed: 75 to 3,000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Driven tool speed: 6,000 rpm Nedpfx Aey R A N Aenpolh Z-axis travel: 400 mm X-axis travel: 165 mm Y-axis travel: 80 mm Feed range: 0.001 to 1,000 mm/rev Rapid traverse Z-axis: 25,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2,040 mm Installation area: 2,120 x 1,750 mm Machine weight: 4,800 kg Year of construction: 2015 No guarantee for the correctness, completeness or up-to-dateness of the information provided.