Multi Vretena Samodejno Stružnica nakup rabljenega (11.364)

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 10.000 mm, skupna širina: 3.000 mm, skupna višina: 1.105 mm, barva: modra, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces within in-house transport operations. Multiple trailer operation: The trailer components are not intended (without a trailer coupling) for multi-trailer operation. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections Loading platform: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, platform decked with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles; drawbar can be raised, removed, and swapped from front to rear; hitch height on towing vehicle approx. 650 mm (alternative heights permitted only upon notification); towing eye according to DIN 74054, diameter 40 mm; track rods with adjustable ball joint heads, diagonal or towing rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock according to UVV. Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even load distribution on the wheels; wheels with solid rubber cushion tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Finish coat RAL 5002 ultramarine blue Nwedpfx Adoxrr Uheysb For rent or sale EU-wide.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 1.012 mm, barva: modra, Operating Conditions: The heavy-duty trailer is designed for use on level, paved surfaces for in-plant transportation. Train Operation: The trailer components are not (without a trailer coupling) designed for operation in combination with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or strip loads are permitted only upon notification. Main Frame: Robust welded construction made of section steel profiles. Nwodouf Rw Topfx Adyeb Loading Platform: Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 pendulum axles, towing bar can be raised, removed, and attached from front to rear. Hitching height on towing vehicle approx. 650 mm (other hitching heights only permitted upon notification), towing eye as per DIN 74054, diameter 40 mm. Track rods with adjustable ball joint heads, diagonal or tie rods adjustable and fitted with maintenance-free joint bearings. Drawbar drop safety as per accident prevention regulations (UVV). Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even wheel load distribution, wheels with solid rubber tyres approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Finish: Top coat in RAL 5002 Ultramarine Blue. Additional Equipment: - Optional: Two-line compressed air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded actuators, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made of round steel welded horizontally into the outer frame members; use of crane eyes only when the trailer is not loaded. - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Towing bar length approx. 1500 mm Rental or sale EU-wide.

Stanje: rabljeno, Dieses Angebot bezieht sich auf das Mettler Toledo Seven Excellence Multiparameter-Messgerät. Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Die METTLER TOLEDO SevenExcellence-Serie umfasst eine Reihe fortschrittlicher Tischmessgeräte für hochpräzise elektrochemische Messungen. Diese Geräte sind ideal für Anwendungen in der Pharmaindustrie, der Lebensmittel- und Getränkequalitätssicherung sowie der Umweltanalytik. Hauptmerkmale der Serie: Messfunktionen: Modelle unterstützen die Bestimmung von pH, Leitfähigkeit, Widerstand, Redox/ORP, TDS, Salzgehalt, ISFET, ionenselektive Elektroden (ISE) und gelöster Sauerstoff (DO). Nwsdpfxjxhgdpe Adysb Benutzeroberfläche & Workflow-Optimierung: - Großes Touchscreen-Display für eine intuitive, effiziente Bedienung - Klar strukturierte Menüführung in verständlicher Sprache verhindert Fehler bei der Inbetriebnahme - Ein-Klick-Bedienung startet eine von 17 vordefinierten oder 60 frei konfigurierbaren Methoden und erhöht die Effizienz - Wahl zwischen uFocus™-Ansicht (nur kritische Daten) oder Standardansicht mit detaillierten Einstellungen und Messwerten Datenmanagement: - Export von Ergebnissen zu Druckern, Excel oder LIMS - Kompatibel mit LabX-Software für 21 CFR Part 11 Konformität und erweitertes Datenmanagement - Zeit- und Datumsstempel über eine funkgesteuerte Uhr zur Einhaltung von GLP-Standards Sicherheit & Compliance: - Benutzerverwaltung und PIN-Schutz verhindern unautorisierte Änderungen an Methoden - Integriertes Sensor Management (ISM®): pH-Elektroden werden automatisch erkannt und speichern ihre Kalibrierdaten – Genauigkeit bleibt auch beim Elektrodentausch gewährleistet Modulares und ergonomisches Design: - Elektrodenarm ermöglicht komfortable Einhandbedienung und präzise vertikale Bewegung zur Vermeidung von Verschütten und Zeiteinsparung - Modulare Bauweise für unkomplizierte Erweiterungen entsprechend Ihrem Laborbedarf - Konnektivität: USB-, Ethernet- und RS-232-Anschlüsse für die Integration mit PCs und Peripheriegeräten.

Stanje: rabljeno, skupna dolžina: 10.500 mm, Leto izdelave: 2016, nosilnost: 14.000 kg, Trailer Multi-Trans VAL 30 Nwsdpfx Aexd Edmjdyjb Drive: None Year of manufacture: 2016 Payload (kg): 14,000

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno), MULTI-PRESS MP.610 6 MATRICES Mechanical and electronic components in perfect condition 12x80 mm MAXIMUM CUTTING LENGTH 105 mm Nwjdoh Rkhnepfx Adyeb 170 strokes per minute YEAR 2002 FULLY OPERATIONAL AVAILABLE IN SPAIN ADDITIONAL PHOTOS AND VIDEOS AVAILABLE

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used Multi Purpose Stacker "Plockmatic MPS" Item for sale: 1 x Plockmatic MPS Type F139-101 Compatible with other Plockmatic finishing units Fits various Canon / Ricoh machines Condition: This offer concerns a pre-owned device that may show signs of use (minor scratches or yellowing). Packaging and Shipping: Nwsdownqp Eepfx Adyjb You are welcome to inspect the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping are available upon request! For further information, please feel free to contact us personally.

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Length: 7100 mm Width: 2500 mm Njdewq N Sdjpfx Adyswb Height: 900 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Simatic Multi Panel Nwodpfxewg Tmdo Adyjb Touch Siemens Siemens MP 277 10-inch Touch Panel 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pickup address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology was operational until deinstallation. Thanks to the superior quality of the conveyor equipment, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods – we are your reliable partner! We are happy to prepare a customized offer for you or provide consultation regarding conception or installation queries. Please simply inform us of your requirements and site conditions. Benefit from our many years of experience and our excellent network of professionals. We have already successfully completed projects for companies in various industries, such as logistics, pharmaceutical industry, trades or the electronics sector. Together we will develop solutions to optimize your workflow and material flow cost-effectively and sustainably. We can also provide fully automated sorting systems or supplementary components, such as picking racks or containers, on request.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The Multi-Fill MPFSH-075-01 depositor is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruits, surimi, chilled salads, and even cooked meats. This machine stands out for its ability to accurately dispense products that are difficult to handle, while ensuring uniform distribution into different types of containers. Moreover, the machine is engineered for efficient operation, featuring optimized air and water consumption, which reduces operating costs while maintaining consistent performance. Its integration into a production line enhances productivity and guarantees high-quality results. Additionally, this robust machine is suitable for demanding industrial environments, providing a durable solution for food processing needs. In summary, the Multi-Fill MPFSH-075-01 depositor is an essential asset for businesses aiming to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of manufacture: 2006 Air consumption: 60 CPM > 80 PSI / 30-35 cubic ft/min / 5.5 bar / 51-60 Nm/hour Water consumption: 0.75–1 GAL/min / 2.8–3.8 litres/min Total required frequency with air vacuum: 0.45 kW Nsdpfx Adewf D Rwsyjwb Products dosed: cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats.

Stanje: novo, moč: 250 kW (339,91 KM), Leto izdelave: 2025, Der Mehrzylinder-Hydraulik-Kegelbrecher ist eine fortschrittliche Art von Kegelbrecher, die für höhere Produktivität und bessere Brechleistung im Vergleich zu herkömmlichen Einzylinder-Kegelbrechern entwickelt wurde. Nachfolgend finden Sie wichtige Merkmale und Informationen zu Mehrzylinder-Hydraulik-Kegelbrechern: 1. Aufbau und Funktionsweise: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen typischerweise über drei oder mehr Zylinder. - Die Brechkammer wird zwischen dem festen Außentrichter (Mantel) und dem beweglichen Innentrichter (Konkave) gebildet. - Die Zylinder steuern die Bewegung des Innentrichters und ermöglichen so einen hocheffizienten und gleichmäßigen Brechvorgang. 2. Hydrauliksystem: - Jeder Zylinder ist mit einem eigenen Hydrauliksystem ausgestattet, wodurch eine unabhängige Steuerung der Brechkammer möglich ist. - Das Hydrauliksystem dient zur Einstellung der Austragsöffnung, zur Fremdkörperfreigabe (Schutz vor Überlast) sowie als Überlastschutz. 3. Einstellbare Austragsöffnung: - Die Austragsöffnung kann einfach angepasst werden, um die Korn­größe des Endprodukts zu steuern. 4. Automatisierungs- und Steuerungssystem: - Mehrzylinder-Hydraulik-Kegelbrecher verfügen häufig über moderne Automatisierungs- und Steuerungssysteme. - Diese können speicherprogrammierbare Steuerungen (SPS/PLCs) und Bedienerschnittstellen (HMIs) für einen komfortablen Betrieb und Überwachung umfassen. 5. Anwendung: - Mehrzylinder-Hydraulik-Kegelbrecher eignen sich zum Brechen harter und mittelharter Materialien in Branchen wie Bergbau, Metallurgie, Baustoffindustrie und Straßenbau. - Besonders effektiv sind sie beim Zerkleinern von Materialien mit hoher Härte und abrasivem Index. 6. Vorteile: - Höhere Brechleistung und Durchsatz im Vergleich zu Einzylinder-Kegelbrechern. - Bessere Kornform des Endprodukts durch gleichmäßigen Brechvorgang. - Verbesserte Zuverlässigkeit und Wartungsfreundlichkeit. - Erhöhte Sicherheit durch die hydraulische Überlastsicherung. 7. Nachteile: Njdpfx Aeq Nd Rbjdyjwb - Möglicherweise höhere Anschaffungskosten als Einzylinder-Kegelbrecher. - Wartung und Reparatur sind unter Umständen aufwendiger. 8. Modelle und Spezifikationen: - Mehrzylinder-Hydraulik-Kegelbrecher sind in verschiedenen Modellen wie der HPT-Serie, der HP-Serie und weiteren mit unterschiedlichen technischen Spezifikationen verfügbar. 9. Hersteller: - Zahlreiche Hersteller produzieren Mehrzylinder-Hydraulik-Kegelbrecher. Namhafte Hersteller bieten dabei in der Regel zuverlässige und hochwertige Maschinen an. Bei der Auswahl eines Mehrzylinder-Hydraulik-Kegelbrechers sollten Sie Ihren spezifischen Bedarf prüfen, verschiedene Modelle hinsichtlich Ausstattung, Kapazität, Aufgabegröße und gewünschter Endkorngröße vergleichen und auf den Ruf sowie auf Erfahrungsberichte zum Hersteller und konkreten Modell achten.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, pomik po osi Z: 140 mm, največja hitrost protivretena: 8.000 obr/min, število osi: 5, Oprema: podajalnik palic, TEHNIČNE PODROBNOSTI Število osi: 5 Število vreten: 2 Njdpsycp Nlefx Adyowb Glavno vreteno Maks. premer palice: 16 mm Pomik osi Z: 140 mm Hitrost vrtenja vretena: 8.000 vrt./min Moč pogona vretena: 2,2 kW Število orodnih mest: 13 Proti vreteno Maks. premer palice: 12 mm Hitrost vrtenja vretena: 8.000 vrt./min Število orodnih mest: 4 PODROBNOSTI STROJA Krmiljenje: FANUC 18i-T Obratovalne ure: 32.000 h OPREMA Podajalnik palic FMB Minimag Opomba: Prodajalec lahko prevzame razstavljanje in nakladanje za 1.500 €.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 47.000 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, pomik po osi Z: 140 mm, največja hitrost protivretena: 8.000 obr/min, število osi: 5, Oprema: podajalnik palic, TEHNIČNI PODATKI Število osi: 5 Število vreten: 2 GLAVNO VRETENO Največji premer palice: 12 mm Pomik osi Z: 140 mm Hitrost vrtenja vretena: 8.000 min⁻¹ Nwedpfx Adeycp Ihoysb Pogonska moč vretena: 2,2 kW Število položajev orodja: 13 PROTIVRETENO Največji premer palice: 10 mm Hitrost vrtenja vretena: 8.000 min⁻¹ Število položajev orodja: 4 PODROBNOSTI O STROJU Obratovalne ure: 47.000 OPREMA Magazin za podajanje palic FMB Minimag Opomba: Demontažo in naklad lahko za 1.500 € prevzame prodajalec.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0179 (033), stružna dolžina: 125 mm, največja hitrost vretena: 7.000 obr/min, premer struženja: 32 mm, premer vpenjanja: 32 mm, dolžina obdelovanca (maks.): 150 mm, Stroj se prodaja z nosilci orodij in rezervnimi deli. TEHNIČNI PODATKI Obratovalni premer nad posteljo: 32 mm Prehod vretena: 32 mm Obratovalna dolžina: 125 mm Krmiljenje: YASKAWA SIEMENS 840 DI V2 Hitrosti vretena: 7000 vrt./min Dolžina obdelovanca: maks. 150 mm Vpenjalni premer: 32 mm Pomik: 0 - 2000 mm/min PODATKI O STROJU Nwedpfxex U Tchs Adyeb Teža stroja: ca. 5,7 t Potreben prostor: ca. 10,5 x 2 x 1,9 m Priključna napetost: 200 V, 3 faze Frekvenca: 50 / 60 Hz Priključna moč: 8,0 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, število vreten: 2, največja hitrost vretena: 6.500 obr/min, potovalna razdalja osi X: 840 mm, pomik po osi Z: 425 mm, Dražba proizvodne linije z robotom in dvema paletizatorjema obdelovancev! TEHNIČNI PODATKI Nwjdpfx Adsyap Nasyob Pomik X: max. 840 mm Pomik Z: max. 425 mm Vrtljaji vretena: 6.500 min⁻¹ Kapaciteta paletizatorja obdelovancev: 24 nosilcev obdelovancev Število glavnih vretensk: 2 Število orodnih revolverjev: 2 Število orodij na revolver: 12 PODROBNOSTI STROJA Visokotlačna črpalka: do 120 barov na linijo Teža stroja: 8.000 kg Hlajenje: hlajenje vretena in postelje stroja OPREMA Robot M6iB Sistem za transport obdelovancev Heilig Automation z 2 prevzemnima postajama Visokotlačna črpalka do 120 barov na linijo Drobec za odpadne kovine Paletizator obdelovancev s kapaciteto za 24 nosilcev obdelovancev

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 102, višina struženja: 1.250 mm, teža obdelovanca (maks.): 8.000 kg, premer struženja: 1.550 mm, premer čelne plošče: 1.250 mm, največja hitrost vretena: 3.000 obr/min, TEHNIČNI PODATKI Višina struženja: 1.250 mm Teža obdelovanca: 8.000 kg Premer struženja: 1.550 mm Premer planske plošče: 1.250 mm Hitrost planske plošče: 200 min⁻¹ Hitrost vretena: 3.000 min⁻¹ Menjalnik orodij: 15 kosov Nodpfx Adjybbi Ioyjwb PODROBNOSTI O STROJU Krmiljenje: Siemens 840 D Vrsta vhodnega toka: izmenični tok (AC) Leto zadnje obnove: 2000 OPREMA C-os Nastavljiva hitrost brez stopenj 3-čeljustna hidravlično-mehanska glava Hladilna naprava Trakasta filtrirna naprava Notranji dovod hladilne tekočine

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.700 mm, višina središča: 630 mm, širina na sredini: 4.000 mm, največja hitrost vretena: 400 obr/min, lastna masa: 4.000 kg, TEHNIČNI PODATKI Višina konic: 630 mm Premer struženja nad ležiščem: 1.300 mm Premer struženja nad suportom: 1.000 mm Premer struženja z odstranljivim ležiščem: 1.700 mm Razdalja med konicami: 4.000 mm Nsdpjydv N Uofx Adyswb Širina ležišča: 700 mm Prehod vretena: 120 mm Število obratov vretena: 2,8 - 400 /min PODROBNOSTI O STROJU Upravljanje: Konvencionalno Dimenzije & Teža Dimenzije (D x Š x V): 6.800 x 2.200 x 2.000 mm Lastna teža: 11.000 kg Transportni paketi: 2 OPREMA Dokumentacija Tročeljustna glava Štiriceljustna glava Odstranljivo ležišče Hitromenjalni nosilec orodja Fiksni lunet Sočasni lunet

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Linija za pakiranje više apoena u jednoj vrećici (do 8 različitih). Sastoji se od 8 stanica. Svaka stanica ima spremnik za apoene koji se transporterima dovode do brojača. Na svakoj stanici brojač izbroji zadani broj apoena i priprema ih u tubi. U pravilnim intervalima tube se otvaraju i apoeni se prebacuju u vrećicu. Vrećica se potom zatvara termičkim zavarivanjem ruba. Linija je također opremljena pisačem koji omogućuje ispis po želji na vrećice. Nwjdpfovt Sp Sjx Adyjb Za više tehničkih detalja obratite nam se. Dimenzije (D x Š x V): 5000 x 5000 x 2700 mm

Stanje: rabljeno, Leto izdelave: 1992, Voest-Alpine DA210/2 – Universal Centre Lathe Nwjdpfoyc Sqrsx Adysb Centre distance: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis position display - 4-jaw independent chuck Ø 250 mm - Multifix quick-change toolpost - Coolant system - Work area lighting - Chip guard/rear splash guard - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€ 650 excl. VAT) Technical Data - Centre height over slideways: 210 mm - Centre height above floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm - Internal taper: metric 57 - Number of spindle speeds: 12 - Speed range: 33 – 1500 rpm - Maximum torque: 900 Nm Tailstock: - Quill diameter: 65 mm - Morse taper: MT 4 Carriage: - Leadscrew pitch: 6 mm - Tool holder cross-section (HxW): 20 x 20 mm Working area: - Swing over bed: 435 mm - Swing over cross slide: 245 mm - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centres: 500 daN - In faceplate (unsupported): 150 daN Feeds: - Longitudinal feeds: 0.072 – 4.038 mm/rev - Cross feeds: 0.036 – 2.019 mm/rev - Metric threads: 0.05 – 28 mm - Inch threads: 56 – 1 TPI - Module threads: Module 0.25 – 14 - D.P. threads: 112 – 2 TPI Electrical drive: - Drive power: 5.5 kW - Motor nominal speed: 1500 rpm Dimensions: - Machine size (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Stanje: rabljeno, Leto izdelave: 2022, - FANUC 0i-TF CNC control - 60° slant bed - Cross slide with linear guides - Parts separator - Coolant system - Chip conveyor - Power-on hours: 2,775 h - Machining hours: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3,200 mm - Loading capacity: 11, 9, 8 bars Njdpowrp Dpofx Adyswb Specifications Main spindle: - Bar capacity: Ø 32 mm - Max. spindle speed: 5,000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Work area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide “Gang Type”: - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Square toolholder: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power rating 100% / 40% duty cycle: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total connected load: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1,900 x 1,030 mm - Weight: 1,230 kg

Stanje: novo, - 3-axis position display - Magnetic and manual spindle brake - 3-jaw chuck, Ø 250 mm - 4-jaw chuck, Ø 320 mm - Z-axis stop - Fixed and traveling steady rests - Multifix type B quick-change toolpost including 4 holders - Faceplate, Ø 430 mm - Lighting system - Coolant system Specifications: - Centre distance: 2000 mm - Swing over bed: 600 mm - Swing over cross slide: 360 mm - Swing in gap: 730 mm - Bed width: 330 mm - Spindle bore: Ø 80 mm - Spindle taper: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Number of speed steps: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch threads: 1 - 56 tpi (66 steps) - Module threads: 0.5 - 3.5 mm (33 steps) - Diametral pitch threads: 8 - 56 dp (33 steps) Nwjdpfjvxgtiox Adyjb - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Cross feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock quill diameter: 65 mm - Tailstock quill taper: MT5 - Tailstock quill stroke: 120 mm - Motor power: 7.5 kW - Voltage: 400 V - Dimensions (W x H x D): 3460 x 1800 x 1150 mm - Weight: 2250 kg

Stanje: novo, Leto izdelave: 2024, Special Offer Price €45,000 (instead of €52,500) excl. VAT. Immediately available! Included Premium Equipment: - Heidenhain ND5023 3-axis digital readout - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change tool post with 4 holders - LED workplace lighting - Set of leveling pads by Spinelli Standard Equipment: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air device on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock, and carriage made of cast iron - Bed guides are induction-hardened and ground - Headstock with induction-hardened and ground gears - Spindle mounted on high-precision bearings - Friction-free carriage movement - Electrical system in a sealed cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, full-length rear guard, lead screw and feed rod protection, emergency stop button - Swarf tray on wheels - Coolant system with electric pump - Central lubrication for guideways with automatic pump - Travelling and fixed steady rests - Service tools and spanners, inspection certificate, electric diagram, operation and maintenance manual - Machine built according to EC standards Optional Equipment: - 3- / 4-jaw chuck Technical data - Centre height: 260 mm Njdpfjpq R Rdex Adyowb - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optionally 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth threads: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch threads: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock taper: MT5 - Total weight: 3200 kg

Stanje: rabljeno, Leto izdelave: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-position VDI40 tool turret - Year of manufacture: 2003 Technical Specifications Capacity: - Center height: 200 mm - Distance between centers: 1000 mm - Max. turning diameter over bed: 400 mm - Max. turning diameter over carriage: 370 mm - Max. turning diameter over cross slide: 210 mm - Bed width: 300 mm Headstock: - Main spindle bore: 65 mm - Main spindle nose: Camlock no. 6 / DIN 55027 no. 6 - Main spindle taper: Morse 5 - Spindle speed ranges: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock quill diameter: 58 mm - Tailstock quill travel: 155 mm - Tailstock taper: Morse 4 Motors: Nodpfxjuwrz Hj Adyswb - Main motor power: 7.5 kW - DC motor Z-axis: 12 Nm - DC motor X-axis: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2,200 kg - Dimensions (W x H x D): 2,980 x 1,730 x 1,610 mm

Stanje: rabljeno, Leto izdelave: 1995, Gildemeister CTX-200 – CNC Lathe - Gildemeister/DMG CNC control - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals & documentation - Year of manufacture: 1995 Technical Data Nsdexy R Uispfx Adyjwb Working area: - Swing diameter over bedway cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm - Longitudinal travel: 350 mm Spindle: - Spindle nose diameter: 120 mm h5 - Spindle diameter in front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power 100/50% duty cycle: 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5000 rpm Feed drive: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool carrier: - Universal disk turret, automatic indexing with directional logic - Number of tool stations: 12 - Tool holder shaft (DIN 69880): 20 mm - Tool change time per station (30°): 0.48 s Universal disk turret with driven tools: - Number of tool stations: 12 - Maximum number of driven tools: 12 - Maximum clamping diameter, driven tools: 12 mm - Drive power 100/50% duty cycle: 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2950 kg Noise emission value: - Workplace-related continuous sound pressure level: 77 dB(A)

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7 A-Q-2701, Rabljeni CNC stružnica Znamka: EMCO Model: Hyperturn 665 Leto izdelave: 2002 Krmiljenje: 840 D Nedpfjx Tbcyex Adyjwb S transportnim trakom za odrezke

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 500 mm, največja hitrost vretena: 2.500 obr/min, moč vretenovega motorja: 37 W, vrtilni moment: 1.450 Nm, zunanji premer vpenjalne glave: 315 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stružnica Voest Alpine Steinel WNC 500 S x 1000 Premer struženja: 500 mm Dolžina struženja: 1000 mm Krmiljenje: Sinumerik 810 T-GA 2 2-stopenjski menjalnik i = 4 Nwjdpfx Adoydfy Nsysb Moč: 37 kW pri 100 % ED Največji navor pri struženju: 1450 Nm Konjiček ročno, z vpenjanjem in povezovanjem Največja hitrost vrtenja: 2500 min⁻¹ Elektronski ročni kolesni upravljalnik Za rezkanje: hidravlično vrtljiv servomotor s 720 Nm in največ 18,5 min⁻¹ 12-pozicijski revolverski nosilec z gnanimi orodji do 3000 min⁻¹ pri 4 kW Orodni nosilec VDI 40 Veliko orodnih nosilcev VDI 40 za notranjo in zunanjo obdelavo ter gnana orodja, VENDAR BREZ ORODIJ!