Center stružnica

VDF BOEHRINGER DUE560x1500

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: Rjdpfx Agerz Nflo Tsp - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Rodpfx Ajvadd Ieg Tep Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Gauge width: 3345 mm Track height: 650 mm 2x machine cutting torches with cutting table Rjdpfx Ajf Ncadjg Tep

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, 3-jaw chuck, and Multifix toolpost. The guideways in the front section show wear. The machine is in ready-to-use condition and can be demonstrated under power by arrangement. Rjdpfjmdn Dxsx Ag Tsp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.500 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.670 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 2.135 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose: DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Rjdpfxectutms Ag Tsp Equipment includes: - Infinitely variable speed control - Hardened and precision ground Z-axis guideways - Turcite coatings (on mating surfaces) of cross and top slides - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and slide splash guard - Chuck guard - Switching rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine levelling pads

Stanje: rabljeno, Leto izdelave: 1974, premer struženja nad ležiščem sani: 480 mm, širina na sredini: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical data Make: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1500 mm Swing diameter over bed: 480 mm Swing diameter over cross slide: 295 mm Spindle speed range: 20 – 2190 rpm Dimensions (LxWxH): 3.50 x 1.20 x 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250 mm, mounted - Faceplate D 400 mm - 10 quick-change tool holders - 1 steady rest All information without guarantee. Redswm D Iljpfx Ag Top A demonstration under power is possible at any time in our showroom.

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm Rodetzf N Rspfx Ag Top - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. Redpfxstuuv Ne Ag Top • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: dober (rabljeno), Leto izdelave: 2000, CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Rodpfx Agofrbcko Tsp Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Complete machine documentation available.

Stanje: rabljeno, Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine - Width: 1335 mm Redefc T Tqspfx Ag Tep - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg