Center stružnica

MCM TC 260-105-1500 Premium

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system Gbjdpfx Aex D Irmehmjn • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Gbodpfx Ahsu Rptyemen Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Gjdpspiarnjfx Ahmsbn Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: skoraj kot novo (rabljeno), Višina konic nad ležiščem: 330 mm, največji stružni premer na vozičku: 408 mm, največji stružni premer nad ležiščem: 640 mm, največji stružni premer v izrezu: 899 mm, razdalja med konicama: 2000 mm, variabilna hitrost vretena, obr/min 18/1500, premer izvrtine vretena: 105 mm, vreteno priključek: ASA 11”, konjiček CM5, premer puše: 90 mm, hod puše: 250 mm, prečni pomik vozička: 275 mm, glavni motor: 15 KM, teža stroja: 3450 kg. Gsdpox Dikkjfx Ahmebn

Leto izdelave: 2012, stanje: delavnici obnovljeno (rabljeno), Konvencionalni precizni stružnica WEILER "CONDOR VC" S triosnim digitalnim prikazovalnikom Siemens Leto izdelave: 2012 Vrtina vretena: 56 mm Razdalja med konicama: 800 mm Maksimalni premer nad posteljo: 205 mm Območje vrtljajev: 30 – 3500 rpm Z naslednjo opremo: - Nosilec orodja Multifix - Zadnja zaščitna stena proti ostružkom z notranjo osvetlitvijo Gjdpfx Aoxykz Aehmsbn - Naprava za hlajenje - Tri-čeljustna vpenjalna glava Ø 200 mm - Zaščita vpenjalne glave - Sledilna luneta Ø cca 150 mm - Konjiček z izvlečnim vrtalnim pinolom - Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, največja hitrost vrtenja: 12.000 obr/min, CNC control Heidenhain TNC 430 32-station tool changer Coolant system 2x chip conveyors Probe system The total X-axis travel is 2050mm, which means you can mill around 2 meters in one operation. A partition wall is also included. When the partition wall is installed, the X-travel is divided accordingly. Technical data / technical details: X-travel 2050 mm Y-travel 520 mm Z-travel 520 mm Spindle taper SK40 Spindle speed range 12000 rpm Number of tool stations in changer 2x 32 Spindle drive power 36 kW Weight approx. 12800 kg Technical data, accessories and machine descriptions are not binding. Gbodpsu Hf Ryjfx Ahmen

Stanje: novo, Leto izdelave: 2025, Yanigav Zemeljski vrtalnik TAM 245 • Enostavna tritočkovna priključitev • Zelo robustno, varjeno ogrodje • Vsestranski močan menjalnik od 30 do 90 KM • Primerni svedri premera od 10 cm do 80 cm in največje višine 1,80 m Godpfxor Eznio Ahmsbn • Odmak 1,30 m levo in desno od osi • Okvir dolžine 245 cm • Korekcija nagiba svedra (spredaj/zadaj in desno/levo) • Sveder ni vključen

Stanje: rabljeno, Premer struženja nad posteljo / mm Premer struženja nad podporo / mm Dolžina struženja / mm Konvencionalni stružni stroj s Forkardt vpenjalom F200, kopirno napravo in veliko dodatne opreme Godpfxjv Rgzws Ahmebn Premer struženja nad prečnim suportom: 240 mm Premer vretena: 52 mm Premer struženja: 360 mm Višina konic: 180 mm Dolžina struženja: 1.000 mm Skupna dolžina: 2.200 mm Skupna širina: 750 mm Skupna višina: 1.400 mm Maks. hitrost vretena: 1.750 min⁻¹ Min. hitrost vretena: 60 min⁻¹ Skupna teža: 1.800 kg Vse tehnične informacije so nezavezujoče in brez garancije. Odstopanja so možna glede na letnik izdelave, izvedbo ali stanje stroja. Odgovornost za pravilnost in popolnost podatkov je izključena.

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication Gbedpfx Aod H Hhzehmjn - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Stanje: rabljeno, Swing diameter over bed: 480 mm Swing diameter over cross-slide: 300 mm Turning length: 1500 mm Center height: 240 mm Center distance: 1500 mm Spindle bore: 42 mm Spindle speeds: 14 – 1400 rpm Gsdpfjtqqx Ajx Ahmsbn Total power requirement: kW Machine weight approx. 2.4 t Machine dimensions (L x W x H): 3.00 x 1.05 x 1.40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX toolpost, live center