Motorne Žage nakup rabljenega (4.211)

Stanje: rabljeno, Leto izdelave: 1981, used, good condition Manufacturer: Holz-Her Iedpfevwfmxex Al Notf Model: 1215 Year of manufacture: 1981 Machine number: 710 Motor: 4.0 kW Cutting length: approx. 5300 mm Cutting height: approx. 2100 mm Cutting depth: 80 mm Saw blade diameter: approx. 300 x 30 mm free-standing slatted frame retractable space requirements: approx. 6550 mm x 1265 mm x 2895 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition without guarantee or warranty

Stanje: rabljeno, Leto izdelave: 1983, used Manufacturer: Holz-Her Model: 1215 Year of manufacture: 1983 Machine no.: 1222 Cutting depth: 80 mm Motor: 4 kW Cutting length: approx. 5,300 mm Cutting height: approx. 2,000 mm Saw blade diameter: approx. 300 mm Freestanding Slatted frame retractable Extraction connection diameter: approx. 100 mm Space requirement: approx. 6,300 mm x 1,100 mm x 2,700 mm Weight: approx. 1,000 kg Total connected load: approx. 3 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as inspected, in current condition Itedpfxjvwfnpe Al Nsf Without guarantee or warranty

Stanje: zelo dobro (rabljeno), 21-rezilni obrezovalnik je bil zelo malo uporabljen. Ijdpjy Drnbsfx Al Notf

Stanje: rabljeno, Leto izdelave: 2023, Cutting length approx. 5300 mm Cutting height approx. 2150 mm Ijdpfx Alevwfcaj Netf Used, in top condition Make: Elcon Type: D 215 Year of manufacture: 2023 Motor: 4 kW Cutting length approx. 5300 mm Cutting height approx. 2150 mm Central support Scoring system: Double cut of main saw blade Saw blade diameter: 250 mm Free-standing Slatted frame retractable Support rails: plastic Original price approx. €26,000.00 Extraction connection: D 100/80 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition Without guarantee or warranty

Stanje: dober (rabljeno), Machine for setting HM saw blades VOLLMER model NS700 Itodsgqalcepfx Al Njf

Stanje: dober (rabljeno), Leto izdelave: 1977, Discharge unit for HM saw VOLLMER model NS120 Isdpfx Aef Rlgnel Njtf

Stanje: zelo dobro (rabljeno), Ejector unit for HM saw WIDMA AS800 Iedpfx Aljgbptcs Nstf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nastavljalna naprava za tračne žage Iedpfx Ajyki Hgsl Njtf

Stanje: novo, Lames de scie à ruban disponibles en stock / livrables à court terme dans une grande variété de dimensions, compatibles par exemple avec les scies à ruban horizontales des marques MEBA, Behringer Eisele, Jaespa, Kaltenbach, Kasto, etc. Nous vous soumettons volontiers une offre pour les lames de scie à ruban dont vous avez besoin. Voici, par exemple, les modèles les plus courants de la marque MEBA avec les dimensions correspondantes (pas de denture et qualité de lame selon accord ; nous vous conseillons volontiers sur demande!) : Scie à ruban Dimensions de la lame 230 G/230 DG 2710x27x0,9mm 260 DG/260DG HS 3350x27x0,9mm 320 G 3200x27x0,9mm 320 G HSS/320 DG HSS 3200x34x1,1mm Itodpfx Aou R Rn Ssl Nof 260 GP 3350x27x0,9mm 260 AP 3350x27x0,9mm/3700x27x0,9mm à partir de 3/2006 260 GA 3700x27x0,9mm 335/G/DG/GA/DGA 4400x34x1,1mm 300 A 4900x34x1,1mm 330mat 4900x34x1,1mm 405 DG 5000x34x1,1mm 410/410 A/410 DG/410 DGA 5800x41x1,3mm 510/510 A/510 DG/510 DGA 6100x41x1,3mm 434mat 6220x41x1,3mm 400 A/500 A 6220x41x1,3mm 600 A 7900x54x1,6mm 800 extreme 9000x67x1,6mm

Stanje: dober (rabljeno), Alber sharpening machine for band saw blades Ijdpfxsglui Ae Al Netf Blade width: 50 - 206 mm Tooth pitch: 20 - 50 mm

Stanje: zelo dobro (rabljeno), Fully automatic band saw straightening machine Ijdpfxod Sr Sio Al Njtf Oppliger Model PBS 860

Stanje: novo, Leto izdelave: 2026, Easy-to-use bandsaw with a robust design. Allows precise adjustment of operating parameters, which directly translates into cutting performance. - Quick-release lever for the blade enables fast and easy blade changes - Precision cast iron machine table - Table tilt adjustable from -10° to 45° - Integrated window for easy blade tension inspection - Two cutting speeds selected via stepped pulley Technical specifications: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Iodpfxsvugwao Al Njtf Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Blade speed (2 speeds) [m/s]: 7/14 Worktable tilt adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Machine dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW / s6-3.1kW Power supply: 3 phase, 400V The listed price is net. Shipping costs are not included.

Stanje: rabljeno, Leto izdelave: 1980, Maks. rez 400 mm Itjdpfxoxzu Dwo Al Nef Teža 1,3 t Zamik da

Stanje: rabljeno, Leto izdelave: 1959, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj za ostrenje tračnih žag. Ogled je možen. Iodpjx Tak Nefx Al Netf

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 Ijdjimr Icepfx Al Njtf OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 With clamping grippers: 7 Itjdpfx Ash Imvhjl Nsf Rotary device (for panels): up to 90° Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Stanje: kot nova (razstavni stroj), Saw blade Brand: Wikus Dimensions: 3990 x 27 x 0.99 mm 5-8 TPI, S also suitable for Trennjäger model TEBA 310 GGA 9 pieces available Iedpfx Aofhdwuel Notf

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each Isdpfx Asv A Htkol Njtf - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant Itjdpfxsv A Htdj Al Njf - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min Itsdjv A Hr Tepfx Al Nof - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm Itodpfxjvz Hz Ee Al Nsf - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 3000x1070x1200 mm Gewicht 1150 kg Gesamtleistungsbedarf 10 kW Optimierungskappsäge OPTIMAX 100 - Sägemotor 7,5 kW - Drehzahl 3200 U/min. - Vorschubmotor 2,0 kW - Vorschubgeschwindigkeit stufenlos regelbar bis max. 80 m/min. - Schnittgeschwindigkeit bis zu 80 Takte/min. - Sägeblatt Ø 455 mm - Sägeblattbohrung 30 mm - Schnitthöhe 100 mm (gemäß Schnittdiagramm) - hohe Schnittgenauigkeit +- 1 mm - min. Werkstücklänge 300 mm - min. Abstand zwischen der Markierung 20 mm - min. Werkstückgröße 300 x 30 x 10 mm - PLC Steuerung mit Touch-Screen für einfache Bedienung + Kappschnitt Fix-Längen-Modus + Sequentieller Kapp-Modus (10 verschiedene Maße speicherbar) + Kappschnitt von markierten Kreidestrichen + Kappschnitt Fix-Längen und von markierten Kreidestrichen - Einlauf-Rollentisch rechts 1200 mm - Auslauftisch links 1000 mm - Druckluftanschluss 8 bar Iodevz Hzxepfx Al Netf - CE Konformität - Abmessungen L=3000, B=1070, H=1200 mm - Gewicht 1150 kg

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Itedpfswhf Ipex Al Njf Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: rabljeno, Cutting length: 4,300 mm Cutting height: 2,150 mm Automatic ELCON Precision Panel Saw Type D 215 ----- Cutting height: vertical 2,150 mm, horizontal 2,100 mm Cutting length: 4,300 mm ----- Technical Specifications: Cutting depth: max. 60 mm Saw blade extension behind panel: max. 25 mm Saw blade: Diameter 250 mm, bore 30 mm, Z=48 hollow flat teeth Saw blade speed: 5,100 rpm Motor: 4 kW (S 6) Measurement Readout for: horizontal cuts: via scale and strip cutting stop vertical cuts: via scale Extraction ports: 100 & 80 mm Required air pressure: 6 bar Features: -Material support with 1 roller per meter of cutting length, can be engaged and disengaged via foot pedal -1 infeed and outfeed roller -pneumatically retractable slat frame -central support, 1 support element per meter cutting length, can be folded out individually by hand -Scoring system: main saw blade double cut -torsion-resistant, free-standing machine frame -Two folding stops for vertical cuts (above and below the central support) ----- Special price "Partnership Edition" ex works in this configuration: on request! ----- Plus pre-carriage, shipping, installation and commissioning (provided the machine does not need to be dismantled). Valid within Germany only. Unloading and transport to final installation site to be handled by customer. Price: EUR 1,900.00 plus statutory VAT ----- Options at extra cost: Cutting length 5,300 mm instead of 4,300 mm Order no.: ELCO0075/O049 Additional charge: EUR 2,590.00 plus statutory VAT ----- Iedpsi Hc S Defx Al Notf Technical details as per manufacturer – subject to change without notice.

Stanje: novo, Leto izdelave: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design incorporates numerous technical innovations that enhance the functionality and usability of this panel saw. Its high-quality workmanship places it among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring a highly precise and securely mounted guide on hardened rails. Optional equipment includes the robust multi-chamber aluminum sliding table CV 400T, offering a very rigid construction and precision assembly with steel bar mounting. Sliding table size: 400 x 3200 mm. Precision and reliability are assured by the heavy-duty swivel segment guidance of the sawing mechanism within the rugged cast iron body, as well as a separate scoring unit with its own motor. TECHNICAL SPECIFICATIONS Saw Isdpfxen D Arhs Al Notf Motor power S6 40%: 7.5 kW/3×400 V Motor speed: 2,870 rpm Max. saw blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilt: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Motor power: 0.75 kW (1 kW) Blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Gross weight: 680 kg Net weight: 675 kg Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply protection: 16 A (25 A) Noise level (without technology): 81.8 dB(A) Noise level (with technology): 85.3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -