Rabljena panelna žaga Felder K700

Felder G-KR107846R1

Stanje: novo, Saw blade diameter: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm Saw blade speed: 5,000 rpm Motor power: 2.0 kW Machine weight: approx. 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Mitre Sliding Saw This machine is equipped with numerous adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates the exact cutting position. Ihedpfxeu Immro Af Tot The blade guard folds away automatically. Delivery includes: - Saw blade (installed) - 6 mm Allen key - Dust bag - 2x side supports

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1984, Max. turning length: 1200 mm Max. turning diameter: 250 mm 2 hydraulic tracing slides Spindle motor: 5.5 kW Isdpep Dt Twefx Af Tjht Hydraulic motor: 2.2 kW

Stanje: pripravljen za uporabo (rabljen), Max. product dimensions: 600x400 mm, max. product height: 55 mm, length: 850 mm, width: 1120 mm, height: 1540 mm, weight: 165 kg. Ihedpfx Asnn Aaujf Tet

Stanje: novo, Leto izdelave: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilting: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Cutting width with parallel fence, version Z400 M, Z400 EL: 1350 mm (option 1000 / 1525 mm) Cutting width with parallel fence, version Z400 X1, Z400 X3: 1250 mm (option 1500 mm) Cutting length: 3500 mm (option 2500 mm / 4100 mm) Ihodjglfv Sopfx Af Tet Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (option 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling cross fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring saw blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm scoring blade: 3.5 mm Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Power supply: 400 V 3-phase (option 230 V 3-phase) Motor power (3-phase): 7 kW / 9.5 HP (S6), option 9.2 kW / 14 HP (S6)

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Ijdpfeudxchex Af Toht Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, konfiguracija osi: 4x4, Leto izdelave: 2010, obratovalne ure: 4.212 h, For sale: freshly imported from Denmark, a reel mower for leveling football pitches or golf courses. This mower features a cabin and is a JOHN DEERE model powered by a YANMAR engine made in Japan. It has five cutting reels, each 75 cm wide, providing a total cutting width of 3.45 meters. Isdpfxewc Rcbe Af Teht Fully operational, regularly serviced. It comes from the first owner, who used it on a golf course. Operating hours: approx. 4200 mth Year of manufacture: 2010 Everything is in working order. Technical data: - Engine: Yanmar - Displacement: 2.1 L - Power: 31 kW - 4-cylinder diesel - Cutting width: 3.45 m - Maximum speed: 15 km/h - Hydrostatic drive - 4x4 with adjustable settings - Equipped with a cabin Equipment includes: - Radio - Heater - Lights - Indicators - Wipers - Adjustable seat - Traction control - All controls in the cabin == The John Deere 1905 series, a five-unit reel mower line, offers a total cutting width of 345 cm (136 in) and can operate at speeds up to 15 km/h (8 mph). Mainly designed for use on golf courses and football pitches, this four-cylinder mower is equipped with a high-performance 51 HP (max output) Yanmar diesel engine, hydrostatic transmission, Command Arm control system integrated into the armrest, and four-wheel drive. From the outset, all models have featured enhanced strength (ESP) 76 cm (30 in) reel units, which is particularly important for golf course operators who require maximum efficiency.

Stanje: zelo dobro (rabljeno), 5-function Combination Machine (Thickness Planer, Surface Planer, Mortiser, Saw, and Spindle Moulder) Thickness Planer: - Usable width: 310 mm - Usable height: 230 mm - Cutter block: 3-knife, strip planer blades Surface Planer: - Usable width: 310 mm - Table length: 1400 mm - Cutter head diameter: 70 mm Spindle Moulder: - Spindle diameter: 30 mm, length: 125 mm - Table width: 800 mm - Moulding fence included Saw: - Saw blade diameter: 250 mm, tiltable up to 45° - Cutting height with 250 mm blade: 80 mm - Table width: 800 mm - Rip fence length: 635 mm Mortiser: - Slot mortising from 0 to 16 mm Performance and Motors: - Voltage: 380 V - Connection: Three-phase Location: Ex stock 54634 Bitburg - Immediately available - Ihsdpfx Aowh U Eqjf Tot

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 400 - 4,500 [rpm] - Drilling capacity in steel / cast iron: 10 / 13 [mm] - Drilling depth: 60 [mm] - Spindle to column distance: 185 [mm] - Usable table area: 220 x 300 [mm] Iodpouhabtofx Af Toht - Motor power: 0.5 [kW] - Power supply: 220 [V] - Speed selection via display of drill diameter and material - Electronic spindle speed control - Infinitely variable spindle speed adjustment from 400 to 4500 rpm - Constant speed under load - Adjustable drill head height through pneumatic balancing device - Fine depth adjustment through graduated vernier scale - Electronic motor protection - Fully machined base plate (220 x 300 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping Ihsdpsvug Dysfx Af Tet - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.