Mokro Peskanje Kabineta nakup rabljenega (222)

Stanje: novo, The fine blasting unit type FB 1 has been specially designed for mobile use. Based on the proven “sandmaster” fine blasting system and combined with pneumatic controls, the device offers extremely flexible operation. Furthermore, the FB 1 fine blasting unit can be ideally combined with other injector series blast cabinets using the optionally available console. As the exclusive representative of sandmaster in the Baden-Württemberg region, IS Zubehör GmbH offers the FINE-BLASTER FB 1 fine blasting unit from our showroom. - “sandmaster” fine blasting system - Blast media grain size: Mesh 46 – 180 - Nozzle diameter: 0.8 – 2.7 mm - Fully pneumatic control - Dimensions: 210 x 350 x 310 mm (W x D x H) Dsdjdrfqtopfx Ag Newc The unit can be inspected at our showroom in Stuttgart by prior appointment and is available immediately.

Stanje: skoraj kot novo (rabljeno), Wet extraction for metallic grinding dust. Dwodpfxswqql Se Ag Njc

Leto izdelave: 2021, Stanje: rabljeno, Especially suitable for: structural steel beams from IPE 80, sheets up to 1,000 mm width, pipes; system length: 8,000 mm + infeed 15,000 mm + outfeed 15,000 mm, system width: 2,200 mm; system height: 4,200 mm. Equipped with 4 turbines (single-disc blast wheels, energy efficient), each with 15 kW output; residual dust content max. 1.0 mg/m³; exhaust air: 4,200 m³; total connected load: 65 kVA; power consumption approx. 65 kW; machine control with automatic height detection, operation via sensor technology, with ergonomic control panel; maintenance system with separate service doors; machine housing: steel chamber made entirely of manganese steel; bucket elevator as separate machine unit, partly made of manganese steel. Dwedpfswz Sz Asx Ag Njc

Stanje: dober (rabljeno), Leto izdelave: 2005, This is a programmable sandblasting machine with a working area of 100x100 mm, including documentation and operating instructions. The machine dimensions are: Dodpfx Agjv Rcycj Newc W x D x H – 1300 x 700 x 1750 mm.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Two automatic flat glass sandblasting machines from MHG are available. 1) MHG GlasMaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500 mm, max. glass thickness: 70 mm, blasting capacity: 30 m²/h, air consumption per nozzle at 4 bar: 800 l/min. Machine dimensions (L/W/H): approx. 4000 mm / 2800 mm / 1100 mm, weight: approx. 2000 kg, control system: Siemens PLC. 2) Sandblasting machine without type plate, machine dimensions (L/W/H): approx. 3200 mm / 2600 mm / 1100 mm, weight: approx. 1500 kg. Inspection on site is possible. Dsdpow Duvhefx Ag Nowc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 16 letvica, skupna širina: 387 mm, skupna dolžina: 565 mm, skupna višina: 1.007 mm, skupna masa: 75 kg, pritisk: 16 letvica, obratovalni tlak: 8 letvica, raven hrupa: 120 dB, dolžina paketa cevi: 7.000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing unit) for fine cleaning using micro-particles as well as aggressive blasting on demanding surfaces. The patented IS 10 dry ice mill allows you, when necessary, to crush 3 mm dry ice pellets into 1.5 mm micro-pellets, making it possible to clean sensitive surfaces such as polished components, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any compressed air loss. The operating pressure ranges from 1–16 bar. The compressed air supply hose is 10m long. The integrated flow system prevents freezing and subsequent clogging at the outlet of the hopper. The design of the tube and hose system prevents pellet breakage. The blasting gun is ergonomically shaped, robust, safe, and easy to operate. Optionally, the blasting gun can be supplied with an LED lamp. The stainless steel frame and machine housing guarantee a long service life. Even under the most demanding operating conditions, the machine requires only minimal maintenance costs. The stainless steel feed hopper has a capacity of 13 kg. The dry ice consumption ranges from 10–100 kg/h. Djdewum Svspfx Ag Njwc Included accessories: - RN-10-08 round jet nozzle - Flex Case II Plus nozzle case (14 pieces) - External module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Belt-mounted compressed air regulator - 10m breathing air supply hose - Breathing air conditioning unit - Ice scoop

Stanje: novo, Blasting Cabin Brand: STK Model: PK-690L Dwjde R Thtspfx Ag Njc Condition: New machine Accessories: - Interior lighting - Extraction system with filtration - Pressure regulator with gauge - Pair of gloves - Blast gun with nozzle - Foot switch - Operating manual

Leto izdelave: 2023, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DyeMansion Powershot C 2.0 – Year of Manufacture 2023 – Excellent Condition For sale is a used DyeMansion Powershot C 2.0, built in 2023, which was only commissioned in August 2024 and is therefore in very good condition. Technical Details: ✅ Model: DyeMansion Powershot C 2.0 ✅ Year of manufacture: 2023 ✅ Commissioned: August 2024 ✅ Condition: Very good, low operating hours Dsdpov T Trnsfx Ag Nswc ✅ Application: Automated blasting/cleaning of 3D-printed plastic parts ✅ Special features: Efficient and gentle cleaning, high throughput rate The Powershot C 2.0 is ideal for companies looking for a reliable and powerful solution for depowdering additively manufactured components. Interested? Feel free to contact us for further information or to arrange a viewing appointment.

Stanje: zelo dobro (rabljeno), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Pros and Cons: - 2.5 m long hose for extended range - Easy switching between blasting media thanks to the mixing valve - When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblaster operates with a pressure of 4 to 8 bar and requires a compressor with a minimum intake capacity of 350 l/min. Dual Tank: If blasting with soda or calcium carbonate does not achieve the desired result, simply switch to a different blasting medium. For a more effective operation, it is also possible to use both media at the same time. With this sandblasting unit, you get a practical machine for your workshop. Dwjdpsqcuvwsfx Ag Nsc With the special mixing valve you can gently and easily remove paint from steel, stainless steel, chrome, aluminium, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You do not even need to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Please note: One of the tanks is exclusively suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approx. 350 l/min Technical data: SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabinet connection: 1/4" Max. pressure: 2 – 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: generalkompletno obnovljen (rabljeno), The unit has been overhauled and is in very good condition. It is immediately operational. Equipped with a material discharge conveyor trough. Filter system not included. Currently connected to power. Dedpfx Aoi Dt Dysg Nswc Available ex location.

Stanje: novo, Leto izdelave: 2025, Blast room 12x5m with blasting trolley and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reclamation unit, material bunker, abrasive replenishment system, free-jet pressure blast fan, filtration system with cleaning mechanism. Walls lined with 4mm fabric-reinforced rubber sheeting. For any technical inquiries or further information, please contact us in writing or by phone. Dodpfx Aedhlikjg Nswc The machines are manufactured at our Grossenlueder facility since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contact persons.

Stanje: rabljeno, Leto izdelave: 2004, Overview This cold glue labelling machine was manufactured in 2004 by the German company KHS. The machine remained in operation until January 2025 and is now stored at the company premises. The labeller is equipped with a camera system for precise alignment of neck labels on swing-top bottles. Dwsdpfxswhwwve Ag Njc Technical Data Capacity: Up to 26,000 bottles per hour Operating direction: Counter-clockwise Formats supported: - 330 ml longneck glass bottles - 330 ml Steinie glass bottles - 330 ml swing-top glass bottles - 500 ml NRW glass bottles Label positions: - Front (up to 2 labels) - Back (up to 1 label) Equipped with Siemens S7 PLC New HMI touch panel in 2019

Stanje: novo, ELMAG Sandblasting Cabinet Model PAL-2N (incl. extraction cyclone + dust bag) ADVANTAGES: Max. workpiece size approx. 50 x 70 x 50 cm Cyclone separator for abrasive recovery Includes compressed air injector nozzle P/3 Equipped with high-durability tungsten carbide blast nozzle Safety foot pedal (start-stop) Extraction fan Dust filter bag P/3 injector Ø 3 mm: 600 l/min air consumption P/3 injector Ø 3.5 mm: 800 l/min air consumption P/3 injector Ø 4 mm: 1,200 l/min air consumption Dwedpfx Ast Ebq Ejg Nec P/4 nozzle diameters: 6 / 8 / 10 mm Dust-tight cover with quick-release clamps, easy workpiece positioning TECHNICAL DATA Working pressure: 1.5 – 8 bar Air requirement for injector nozzle P/3 Ø 3 mm: 600 l/min Air requirement for injector nozzle P/3 Ø 3.5 mm: 800 l/min Air requirement for injector nozzle P/3 Ø 4 mm: 1,200 l/min Blast nozzles P/4 Ø: 6/8/10 mm Voltage/Frequency: 400/50 V/Hz Cabinet interior: 60x88x78 cm Dimensions: 1,150x980x1,900 mm Weight: 120 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, priključek za stisnjen zrak: 6 letvica, obratovalni tlak: 6 letvica, trajanje garancije: 12 meseci, skupna masa: 8.000 kg, notranja višina: 600 mm, teža obdelovanca (maks.): 20 kg, premer vrtljive mize: 400 mm, Die beschriebene Strahlanlage ist für das automatische Strahlen oder Kugelstrahlen mit ausgewählten Strahlmitteln ausgelegt, je nach gewünschtem Endergebnis der Oberflächenbehandlung. Dwedpjwdgrzsfx Ag Nec Zu bearbeitende Werkstücke werden auf geeigneten Werkstückhaltern positioniert, die das Abschatten der Kontaktflächen von Bauteilen bzw. Vorrichtungen minimieren. Das Be- und Entladen der Teile erfolgt im automatischen Zyklus durch einen Schrittförderer, der auch im Dauerbetrieb arbeiten kann, in die Strahl-/Kugelstrahlzonen. Nach dem Durchlaufen einer Neutralzone werden die Teile in den folgenden Zonen gestrahlt bzw. kugelgestrahlt; vor dem Entladen werden die Teile zusätzlich abgeblasen. Das System ist mit einer (1) Be- und Entladestation ausgestattet, um das Be- und Entladen während des Prozesszyklus zu erleichtern. Sobald das Werkstück durch einen Bediener oder automatisiert geladen wurde, startet der Zyklus, und der Förderer fährt einen Schritt weiter. Dadurch gelangt das neu beladene Werkstück in die Kabine, während gleichzeitig ein bereits behandeltes Teil an der Entladestation ankommt. Die Maschine arbeitet mit Taktzeiten, wobei im Vollbetrieb alle Positionen der Satelliten auf dem Förderer während der Zykluszeit belegt sind. In den inneren Positionen der Kabine rotieren die Satelliten, während die Strahldüsen das Strahl-/Kugelstrahlmittel mit dem jeweils optimalen Aufprallwinkel gemäß Konstruktionsvorgabe auf das Werkstück bringen.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 13.937 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5942029, višina izdelka (maks.): 600 mm, največja širina izdelka: 1.500 mm, TECHNICAL DETAILS Pass-through width: 1,500 mm Pass-through height: 600 mm Workpiece length: min.: variable Turbines and Drive Number of turbines: 4 units Dwjdpfxjwlpdvs Ag Noc Power per blast wheel: 11 kW MACHINE DETAILS Total power consumption: approx. 80 kW Operating hours: approx. 13,937 h Dimensions: 17,940 x 3,648 x 6.38 h EQUIPMENT - Pass-through shot blasting machine with roller conveyor - 4 blast wheels, each with 11 kW - Roller conveyors for infeed and outfeed (approx. 12 metres in total, each segment approx. 6 metres length)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, obratovalne ure: 4.000 h, Funkcionalnost: omejena funkcionalnost, Stroj za peskanje plošč in europrofilov. Delovna širina: 2,6 m, delovna višina: 0,5 m. Dovodni in izhodni motorizirani valji po 12 m. Djdpfsvgbcuex Ag Nowc Stroj je v delujočem stanju, vendar potrebuje strokovnjaka za določene obnove. Že izvedene obnove: - nov motor za odsesovalni ventilator - nova rezila turbine - zaščitne plošče v notranjosti skoraj kot nove - nov jermenski trak dvigala - nova sklopka med eno turbino in motorjem Potrebna popravila: - elektro omara (stroj že deluje z novim krmilnim sistemom, stara krmilna plošča ni nastavljena in ni funkcionalna) - popravilo krtače (obstaja, a je v okvari – trenutno je ne uporabljamo) - električne povezave in senzorji (nekateri so vgrajeni, vendar se jih ne uporablja)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Dsdpfx Agouwlzyj Newc Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, priključek za stisnjen zrak: 6 letvica, obratovalni tlak: 6 letvica, trajanje garancije: 12 meseci, skupna širina: 2.400 mm, skupna višina: 4.500 mm, skupna dolžina: 3.800 mm, skupna masa: 3.800 kg, notranja višina: 600 mm, premer vrtljive mize: 350 mm, Stroji za peskanje s satelitskim vrtenjem tipa PTR in SSR so zasnovani za obdelavo občutljivih kosov posamično z uporabo vseh vrst abrazivnih materialov. Šobe za peskanje upravlja robot. Stroj je opremljen z glavno indeksirano mizo, ki deluje kot izmenjevalec palet in omogoča vnos ter iznos delov v/iz peskalne komore. Glavna miza ima 2 ali 4 satelite, glede na želeno zmogljivost. Ena postaja je namenjena nakladanju in razkladanju, druga postaja (nasproti nakladalne cone) pa je namenjena procesu peskanja oziroma utrjevanja površin. Šobe premika robot. Število šob je določeno glede na polnilni volumen, proizvodno kapaciteto ter obliko obdelovancev. Stroj je primeren za ročno nakladanje in razkladanje, lahko pa je opremljen tudi z avtomatsko enoto za manipulacijo v skladu s potrebami proizvodne linije (dvoosni portalni manipulator, robot itd.). Možno je vgraditi Ventury sistem ali tehnologijo s tlačnim rezervoarjem. Priporočena je tudi vgradnja magnetnih ventilov za kontrolo pretoka abraziva. Stroj je lahko opremljen z do tremi roboti za utrjevanje (peening). Dwedjwdgpgepfx Ag Noc

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. Dwedpfx Ajdhl Ngsg Nec If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact.

Stanje: novo, Leto izdelave: 2025, pritisk: 6 letvica, priključek za stisnjen zrak: 6 letvica, obratovalni tlak: 6 letvica, trajanje garancije: 12 meseci, skupna širina: 1.500 mm, skupna višina: 1.000 mm, skupna dolžina: 1.500 mm, vrsta vhodnega toka: trifazni, sesalna zmogljivost: 1.500 m³/h, premer vrtljive mize: 1.200 mm, Oprema: kabina, Stroji za mokro peskanje PP-UM so zasnovani za obdelavo homogene mešanice peskalnega materiala, zraka, vode ter po potrebi tudi detergenta. Končni rezultat je mehkejši postopek peskanja površin (v primerjavi s suhim peskanjem). Običajni peskalni materiali so korund, silikati in steklene kroglice. Posebna črpalka (v robustni izvedbi za agresivne tekočine) omogoča homogeno vzdrževanje raztopine ter dovaja mešanico do peskalne pištole/pištol. Stisnjen zrak zagotavlja ustrezen udarec peskalnega materiala na površino (6-8 barov). Dwsdpfx Aowdgi Hsg Nsc Proces je lahko ročen ali popolnoma avtomatiziran – modeli strojev PP-UA, opremljeni s popolnoma motorizirano vhodno-izhodno delovno mizo, dvoosnim portalkim robotom itd., omogočajo nastavitev popolnoma avtomatskega postopka. Stroji so lahko opremljeni s papirnatim filtrom za odstranjevanje lahkih oljnih kontaminantov iz recirkulacijske raztopine (s čimer se izognemo predhodnemu razmaščevanju kosov pred obdelavo).

Stanje: novo, Leto izdelave: 2025, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. Djdedrtanspfx Ag Newc The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2025, Blast wheel machine, suspended rail type 1.15 2T Working area: Diameter = 1000 mm, Height = 1500 mm, Payload = 500 kg Equipped with 2 blast wheels, each 7.5 kW, including filter system and airborne dust filter. For questions regarding technical specifications, please contact us in writing or by phone. Dodpfx Agjdrr U So Nowc The foundation of our machines is the manufacturing facility at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Stanje: novo, Leto izdelave: 2025, Tumble belt blast machine with blast wheel – 7.5 kW direct-drive disc turbine with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Dodpfx Aog S Rt Eeg Nowc

Stanje: novo, Leto izdelave: 2025, Blasting container for blasting glass beads and ceramic balls, equipped with a drum magnetic separator and stainless steel grating floor. Internal dimensions: L=5850 mm, W=2300 mm. Side door opens for easy loading with a forklift. Dedpfx Aeg S Rt Tjg Newc