Prenosni Računalnik Kabineta nakup rabljenega (515)

Stanje: rabljeno, Simatic Field PG / Appareil de programmation / Ordinateur programmateur / Ordinateur portable / Step 5, Step 7, ProTool, Notebook SIEMENS type PG 720 PII Année de fabrication : env. 1999 CPU : Intel Pentium II RAM : 192 Mo Système d'exploitation : Windows 98 SE Disque dur : 6 Go HDD Écran : LCD 12" (pivotant) Saisie : clavier amovible, boule de commande Lecteurs : lecteur de disquettes 3,5" LS-120, CD-Rom Interfaces : - Logement pour EPROM - PC/Card (PCMCIA) - MEM-Card - 1 x port parallèle - 1 x port série (RS232) 25 broches - 1 x port série (RS232) 9 broches - 1 x VGA Out - 1 x USB - 1 x MPI/DP 9 broches - Alimentation externe avec câble secteur - Livré en sac de transport Logiciels Siemens installés : - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 Gbedpfxox E Aywo Afqjg - Logo!Soft V2.0 Dimensions totales (L x H x P) : 400 x 270 x 200 mm (en sacoche) Poids total : 6,5 kg Ordinateur fonctionnel, écran opérationnel, batterie tampon CMOS vide, Batterie d’utilisation mobile hors service, l’appareil démarre. Logiciels Siemens opérationnels.

Stanje: dober (rabljeno), Sistem Trans-Blot Turbo združuje tradicionalne tehnike blotanja z naprednimi filtri iz papirja in sodobnimi pufri, kar omogoča hitro prenašanje proteinov iz gelov na membrane s minimalnim časom priprave. Sistem vključuje napajalnik z visokim tokom, ki usmerja električni tok med vgrajeno platinirano titanovo anodo in katodo iz nerjavečega jekla. To omogoča izjemno učinkovit in hiter prenos v vsega 3 minutah. Celoten sistem je na voljo v formatu za takojšnjo uporabo, kar raziskovalcem omogoča hitrejše in enostavnejše pridobivanje rezultatov, z reproduktivnostjo, ki jo je težko doseči s tradicionalnimi metodami blotanja. Izjemno hiter prenos – omogoča prenos mini ali midi gelov v samo 3 minutah Velika zmogljivost – omogoča enkraten prenos 1–4 mini ali 1–2 midi gelov Višja učinkovitost – bolj učinkovite prenose v primerjavi z drugimi metodami Gbsdjxzd E Dopfx Afqeg Prilagodljivost – uporabniku omogoča nastavitev pogojev prenosa in je združljiv s tradicionalnimi pol-suhimi potrošnimi materiali Okolju prijazen – potrošni materiali so okolju varni in ne povzročajo stroškov odstranjevanja odpadkov Naprava je v dobrem delovnem stanju. Oglejte si tudi naše ostale oglase.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Gsdpjqvlw Iefx Afqobg ready for immediate use – simply plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 2 l per day can be controlled via app – set temperature, receive notifications and monitor fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation as with gas mobile use thanks to 4 swivel castors operated with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust gases – does not emit any burning smell compliant with the new EU emissions directive automatic restart after power failure

Stanje: dober (rabljeno), Leto izdelave: 2013, Ref. št.: 10528 Proizvajalec: RöMER Tip: HEXAGON INFINITE 2.0 Gbedsx Hn Ayspfx Afqeg Leto izdelave: 2013 Lokacija skladišča: Halberstadt Država porekla: Nemčija Merilna dolžina: 2000 mm

Stanje: rabljeno, FHS Roller Conveyor Transversal Transfer Pusher 90° 4300-510-450 RA1960 Manufacturer: FHS Direction of movement: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm / 650 mm with chain deflection Length: 4300 mm 2x transfer pushers Pusher width: 1500 mm Roller diameter: 50 mm Roller pitch: 75/100/125 mm Conveyor and pusher motor: SEW motor 300-500V Gedpjk Abm Rjfx Afqobg Frame height: 140 mm / 250 mm with chain deflection Conveying speed: Infinitely adjustable with frequency inverter Scope of delivery: without supports, without side guides, 1x Movi-Mot frequency inverter, 5x light barriers Optionally available: Single-sided and double-sided side guides Supports For individual and professional consultation, simply contact us. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: dober (rabljeno), Stolpni vrtljivi žerjav, dvoranski žerjav, delovni žerjav, mobilni stolpni vrtljivi žerjav, prenosni stolpni vrtljivi žerjav, potujoči žerjav - Proizvajalec: VEB, stolpni vrtljivi žerjav tip KHZ 250, nosilnost 120 kg (stolpni vrtljivi žerjav projektiran za 250 kg) - Osnovna plošča: 440 x 440 mm - Doseg: 1.780 mm - Skupna višina: 2.940 mm - Višina kljuke: 2.280 mm - Območje vrtenja: 360° - Verižni dvig: Pfeifer tip CH1, leto izdelave 2007 - Glavno dviganje: 8,0 m/min - Fino dviganje: 2,0 m/min - Podnožje: 820 x 820 x 285 mm - Mere: glej fotografijo tehnične risbe - Transportne dimenzije: mm - Lastna teža: 1.300 kg Gbodpfjxnwnljx Afqsg

Stanje: dober (rabljeno), Leto izdelave: 2010, Vrtljiva miza WEISS Tip: TC 220T letnik 2010. Gbsdpexr Dh Hjfx Afqeg

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Gbedeu Idxfjpfx Afqjg Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant This machine is not connected. Sale as is! Subject to prior sale.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – just plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 2.5 l per day app-controlled – set temperature, access notifications and fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation as with gas heaters mobile use thanks to 4 swivel castors Gbodpfoqvlu Ejx Afqsg operates on biodiesel or (red) diesel e quiet operation – only 48 dB no dust – no fan no exhaust gases – emits no burning smell complies with latest EU emission regulations automatic restart after power failure

Stanje: zelo dobro (rabljeno), ABB DSQC639 Glavni računalnik, več enot na zalogi, 20% popust pri naročilu več kot ene enote RAZVOJ PODJETJA GSG ROBOTICS Gedpfxoxq Tqze Afqebg Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl in ponuja obsežno servisno območje za vzdrževanje in popravilo robotov. Skozi leta smo postali celovit partner za vse zadeve povezane z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov: ABB in Fanuc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Manufacturer: KNAPP STREAMLINE Year of manufacture: 2010 Drive: SEW-Eurodrive motor Transverse roller conveyor DPP – Dynamic Positioning Platform Motorized roller conveyor with sensors. Dynamic material positioning – Incoming cartons, boxes, or trays can be positioned, rotated, or precisely conveyed by the system. Change of direction, distribution – The unit can transport goods in different directions, to other conveyor lines, or to other machines. Stop and buffer – Can also serve as an automatic buffer. Transfer Roller Section: Length: 765 mm Gbsdpfx Afof Arpbeqog Width: 325 mm Transfer roller diameter: 50 mm Conveyor Roller Section: Length: 335 mm Width: 325 mm 4 support rollers: 50 x 310 mm Overall dimensions: Width: 800 mm Length: 1250 mm Height: 530 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 451 PORTATİF KESİM MAKİNASI Ø400 mm, • Uporablja se za rezanje aluminijastih in PVC profilov • Žaga z diamantno konico • Dvojni vzmetni sistem in varnostni pokrov žage pri rezanju • Možnost rezanja na zgornji mizi pod katerimkoli kotom med -45 in +45 stopinjami Gbodorcm Abjpfx Afqjg • Fiksacija kota na desni in levi pri 0, 15, 22,5, 30, 45 stopinjah MOŽNOSTI • Sistem spodnje omare • Desno-levo metrični sistem • Pnevmatski prešni in hladilni sistem

Stanje: dober (rabljeno), Stolpni vrtljivi žerjav, halni žerjav, delovni žerjav -Proizvajalec: VEB, stolpni vrtljivi žerjav tip KHZ 250, nosilnost 120 kg (stolpni žerjav zasnovan za 250 kg) -Osnovna plošča: 820 x 820 mm -Doseg: 1.780 mm -Skupna višina: 2.940 mm -Višina kljuke: 2.270 mm -Območje vrtenja: 360° Gbjdpfx Afoxpibgoqog -Verižni dvig: Liftket tip kg, letnik 2009 -Glavno dviganje: 8,0 m/min -Fino dviganje: 2,0 m/min -Mere: glej tehnično risbo na fotografiji -Transportne dimenzije: mm -Lastna teža: 0 kg

Stanje: zelo dobro (rabljeno), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. The MicroSpy Mobile is ideally suited for mobile use thanks to its portability, making it perfect for onsite measurements on heavy machinery, vehicles, rollers, glass panes, or other large components. This enables high-resolution, non-destructive measurements of key surface characteristics such as roughness, contour, topography, layer thickness, wear, bearing ratio, or volume directly onsite. Smaller samples can be measured directly on the measuring table. Suitable for use on large construction and machine parts Excellent resolution values Outstanding reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile XY range: 50 x 50 mm² XY Table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel (measurement area XY): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder System resolution: 0.25 µm XY-repeatability: < ± 1 µm Table deviation per axis: < 2 µm / 50 mm (non-reproducible part: < 0.5 µm) XY squareness: < 4 µm / 50 mm Z-axis, motorized: Type Bearing Drive Travel Position measuring system System resolution Axis play Manual coarse adjustment: Type: dovetail guide with fine adjustment Adjustment range: 25 mm Measurement: Minimum point spacing XY: 1 µm Sample size: - Sample weight: - Minimum measuring speed: 1 µm / sec Maximum measuring speed: 50 mm / sec Complete system: Total weight: approx. 150 kg Measuring setup: approx. 5 kg System footprint: approx. 0.3 x 0.3 m² Control unit dimensions (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, up to 16A Power supply US version: 110 - 240V, 50 - 60Hz, up to 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Ambient conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile sub-frame with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for back door 1 x Cold appliance cable for main supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Gsdsg Sr D Hjpfx Afqsbg Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – just plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 4 l per day Godpfxjqvlvme Afqebg app-controlled – set temperature, receive messages and monitor fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation like with gas mobile usage thanks to four swivel castors operated with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust fumes – no combustion odor emitted complies with the new EU emissions directive automatic restart after power failure

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8450-02-001, premer vrtljive mize: 4.000 mm, Oprema: transportni trak za ostružke, TECHNICAL DETAILS Gbsdpfx Afexur Rujqjg Rotary indexing table diameter: 4,000 mm Processing stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large diameter of 4,000 mm for comprehensive machining operations - 12 NC drilling units with 12-position clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system including filtration and coolant systems - Measuring system and automatic loading/unloading for fully automated operation

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approximate machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations and 15 drilling and milling spindles E.g., suitable for the production of large batches of fittings Further technical specifications: - Workpiece carrier: Drum-type workpiece holder, Ø 800 mm, for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; maximum speed 2240 rpm - Left side: 3x drilling/milling and drilling spindles, 2x tapping spindles - Right side: 2x drilling/milling spindles, 2x tapping spindles and 1x U-axis, plus radially 2x movable tapping spindles, 2x drilling/milling spindles (one of which is movable), and 1x movable U-axis Gedpfx Afsu Idvwoqebg - 1st tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pulse generator as is.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 441 Portatif Kesim Makinası Ø300 mm, • Used for cutting aluminium & PVC profiles • Dual spring system and saw guard safety during cutting • Capability to cut at any desired angle between -45° and +45° on the upper table • Angle locking at 0°, 15°, 22.5°, 30°, and 45° to the right and left OPTIONS Gbodercmzdjpfx Afqeg • Lower cabinet body system • Right-left metric stop system • Pneumatic pressing and cooling system • Diamond-tipped saw blade

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Gbsdpfx Afen Arm Tsqeg Stray light

Stanje: rabljeno, Technical details: Number of spindles: 11 units Number of stations: 11 units Spindle taper: SK 40 Required air pressure: 6 - 7 bar Total power requirement: 13 kW Approximate machine weight: 10.2 t Space requirement approx.: 4.0 x 4.0 x 3.4 m Machine dimensions: 3.4 x 3.45 x 2.9 m Control cabinet dimensions: 2.1 x 0.4 x 1.9 m Thread cutting and drilling machine with 11 drilling and milling spindles Optional accessories available. Please inquire! - Workpiece holding drum Ø 1000 mm with workpiece carrier and 8 workpiece clamping stations, self-centering chuck jaws 260 mm between jaws, max. 20 mm clamping jaw stroke (oil-pneumatic circuit) - 11 working stations with SK 40 spindle interface - Right: 4x drilling-milling spindle, left: 4x drilling-milling spindle, and 3x radial drilling-milling spindle - Drilling unit: spindle stroke 125 mm, feed rate 0 - 2 m/min, speed 164 - 1005 rpm in 12 steps - Tapping units: working stroke 125 mm, reversible direction, speed 31.5 - 194 rpm in 12 steps - Opposed drilling units: 8 units with SK 40 interface Gsdpfx Afeu Idw Isqjbg - Coolant system with supply line - Operation via control panel - With chip collecting box, L: 1000 x W: 740 x H: 220 mm ID.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, • Used for milling lock handle slots, hinge and espagnolettes slots, as well as channels of desired dimensions on aluminum and plastic profiles • Copy routing unit designed according to the specific operation to be performed • Ability to open various channels independently from the copy template by means of the adjustable stop Gbodsrcm D Dopfx Afqeg OPTIONS • Lower cabinet system • Pneumatic system

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel Gbedpfxeu Idv Dj Afqjg - Hand-held control unit in good condition.

Stanje: rabljeno, Technical Details: Spindle mount: 40 Gbedpfx Aju Idwbjfqog Number of spindles: 9 units Approx. machine weight: 10.0 t Total connected load: 13 (17.5 HP) kW Machine dimensions (LxWxH): 4100x3400x3200 mm Control cabinet dimensions (LxWxH): 2100x350x1900 mm TRANSFER AUTOMAT - DRILLING AND THREAD CUTTING AUTOMAT - INDEXING TABLE MACHINE with 9x drilling and milling spindles - Workpiece carrier with 8 clamping stations: workpiece drum Ø 1000 mm (oil-pneumatic circulation), clamping stations equipped with self-centering jaws - Right side: 2x drilling/milling spindles, 1x with flexible U-axis and 1x thread cutting unit with 9-step flexibility - Left side: 2x drilling/milling spindles, 1x with flexible U-axis and 1x thread cutting unit with 9-step flexibility, plus 2x radial flexible drilling/milling spindles and 1x thread cutting unit, 9 steps, flexible - Drilling unit: SK 40 mounting; spindle stroke 125 mm; feed 0 - 2 m/min; speed in 12 steps from 164 - 1005 rpm - Drilling and facing unit: SK 40; spindle stroke 90 mm; feed 0 - 2 m/min; rapid traverse 7.5 m/min; speed in 12 steps from 166 - 1020 rpm - 3 thread cutting units: SK 40 mounting; working stroke 125 mm; speed in 12 steps from 31.5 - 194 rpm; right- and left-hand rotation - 6 opposed drilling units: SK 40 interface Equipment: - Coolant system with supply - Operation via control panel - Chip box - Counter - Access staircase

Stanje: rabljeno, Technical Details: Spindle mount: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15–20 sec Speed: drilling 225–1037 rpm Speed: threading 50–316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Gsdpeu Idycofx Afqebg Machine weight approx.: 9.0 t Space requirement approx.: 3.9 x 2.4 x 2.5 m Machine dimensions: L: 3.9 x W: 2.2 x H: 2.7 m Dimensions L x W x H: + system 2.7 x 2.52 x 2.25 m Transfer Machine The machine can be offered fully overhauled. (Photos show original condition!) The machine is designed for machining workpieces in a single clamping operation. Primarily, Ms blanks with Ø 90 mm x approx. 100 mm length were machined on it. Description: - Workpiece carrier indexing table with clamping stations, round table type with horizontal axis, equipped with 5 workpiece stations. Machining units: - Drilling spindle and thread-cutting units - Drilling capacity up to 2 3/4" and 81.53 mm in Ms - Thread cutting up to 2 1/2" and metric threads The machine is equipped with a feeding and unloading unit for workpieces. (Feeding rate 3–4 pcs/min and cycle time 15–20 sec.) Also includes coolant system in original condition.

Stanje: rabljeno, Technical Specifications: Number of spindles: 9 units Gbjdsu Idvkepfx Afqsg Total power requirement: 83.0 kW Machine weight approx.: 17.0 t TRANSFER AUTOMAT with 9 drilling and milling spindles - On the right: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; and on the left: 3 drilling and milling spindles, 9-speed, gear-driven, fixed; as well as 3 radial drilling and milling spindles, 9-speed, gear-driven, fixed inside diameter.