Gnojilo Rastlinskega Varstvo Technology nakup rabljenega (23.561)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical data: - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Dedpfjlatz Dsx Ad Aeup Belt length: 2000 mm

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical specifications: Dusdpfjk Eakvsx Ad Asp - 230 V - 0.7 A - 50 Hertz - IP65

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo sta dve plazemski napravi Plasma Technology za čiščenje in predobdelavo površin. Notranje dimenzije vakuumske komore X/Y/Z: 190mm/190mm/320mm, volumen vakuumske komore: 11,5l, moč plazemskega generatorja: 400W, delovni tlačni razpon: 0,05mbar–0,6mbar, maks. tlak procesnega plina: 2bar, dimenzije stroja X/Y/Z: cca. 500mm/300mm/600mm. Dokumentacija je na voljo. Možen je ogled na lokaciji. Djdpoyrg Hmofx Ad Asup

Leto izdelave: 2026, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, gradbena višina: 5.295 mm, zunanji premer: 3.571 mm, premer polžastega transporterja: 350 mm, številka stroja/vozila: V-Mix 10.000PLR, maks. debelina pločevine iz nerjavečega jekla: 4 mm, Oprema: CE označba, A conical mixer with a 10,000-liter capacity (measured at horizontal fill) is available. This mixer is comprised of partially new and used components, all of which have been fully refurbished. All product-contact parts are made of stainless steel 304. All seals and lubricants are approved for use in the food or feed industry. - Capacity: 10,000 liters - Usable volume may vary depending on the product - Vessel: Stainless steel 1.4301 (304) - Gear unit: Used, original Nauta - Swivel arm: Used, carbon steel, original Nauta - Crossbeam: Used - Vessel: New, stainless steel 1.4301 (304) Dsdpeyrnd Hjfx Ad Aeup - Mixing screw: New, stainless steel 1.4301 (304) - Discharge: New, pneumatically operated - Drive motors: Used, 11 kW & 1.5 kW - Adaptation for use in ATEX-rated zones possible The mixer comes with a new manual and CE certification. The mixer is ready and can be collected at short notice. Inspection at our facility in Heerhugowaard, NL is possible by arrangement. If you have any questions, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2412178161400128, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 200 mm, skupna dolžina: 3.800 mm, skupna širina: 1.900 mm, skupna višina: 1.790 mm, največja hitrost vrtenja: 40.000 obr/min, The following machine is for sale: Pfeiffer Gantry Milling Machine SkyCNC WL2412 Ready to use! Complete package > Setup, Connect, Start Working Condition: Used, very good condition, fully operational Original price: €98,000 The machine can be inspected under power at our facility. Further detailed photos available on request. Affordable shipping, including suitable forklift in the truck, can be arranged. TECHNICAL DATA: Vacuum Table Working Area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 interface, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication All axes with ball screw drives Including handwheel control Including automatic tool length measurement (automatic transfer to the system) External dimensions / Footprint: 3800 x 1900 x 1790 mm Weight: 2150 kg Year of manufacture: 2015 Tool changer: 10-position + 8 storage slots for manual tool changes (can also be programmed for automatic tool changes) Power supply: Three-phase 400V/AC, fuse protection 63A recommended (plug and cable included) Steel frame with high rigidity on 4 adjustable feet with robust linear guides. Suitable for machining non-ferrous metals, plastics, and wood. Cooling unit with pump (active cool 1500) 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, Dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Soundproof box with insulation, dimensions: L 1050 x W 700 x H 570 mm Computer with control software, Fanuc ISO programming language, CAD system, machine setup program, comprehensive manuals on CD Dedpfx Adeymznzj Aeup Further accessories included: 10x HSK E25 collet chucks, 6x HSK collet chucks CentroGrip® tool holders MR16 Mini, collet set CentroGrip® Ø1 – Ø10 (8 pcs), 2x CentroGrip® collet Ø8, 3x CentroGrip® collet Ø6, 2x CentroGrip® collet Ø10, MR16 Mini collets: 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10, 2 tool clamping wrenches, 1 MR16 spanner, sealing rubber for vacuum table, vacuum fleece pads, 3 plexiglass safety covers, 3D dial gauge Terms: We guarantee the machine is currently operational. No further guarantee is provided. No statutory warranty is assumed. The risk passes to the buyer upon loading. Payment is due 100% in advance before loading. An invoice with VAT stated will be prepared and sent electronically as a PDF. All future costs, losses, and warranty claims arising from the use or non-use of the machine by the buyer are excluded.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, Prebijalni stroj, skoraj nerabljen, teža: 8500 kg. K lotu spada jeklena omara z vsebino. Vsebina vključuje orodje, rezervne dele in razno drobno opremo. Dodpfexzpuwox Ad Aoup

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 1.300 mm, največja širina rezanja: 1.300 mm, skupna masa: 9.000 kg, teža obdelovanca (maks.): 8.000 kg, pogonska enota žage: 11.000 W, For sale: Industrial, fully automated cross-cut saw for timber and structural element bundles — a complete processing line for cutting bundles to specified lengths. The machine is designed for use in sawmills and timber construction plants, where high process efficiency, cut length repeatability, and bundle stabilization during sawing are essential. The machine is available immediately — inspection and testing possible. Operating parameters: • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section depends on the extreme position of the hydraulic clamps — it is possible to cut bundles of smaller dimensions. Cutting module: • Main motor: 11 kW • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic guide bar lubrication system A rigid saw head construction ensures operational stability and repeatable cut lengths. Bundle stabilization: • 6-point hydraulic clamp system (top + side + before/after the saw line) • Bundle positioning against vertical rollers • Elimination of bundle movement during saw entry Process automation: • Intelligent bundle strapping system • Automatic strap positioning detection • Automatic reference cut capability • Buffer for cut bundles Duedpfx Aoxn Rt Ued Asp Handling & transport: • Cross infeed conveyor • Cross outfeed conveyor • Automatic bundle collection after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilting rollers on saw module (preventing jamming by large offcuts) Automation: • Siemens PLC controller • Yaskawa servo drives & inverters • 21–22” operator panel • Remote diagnostics and service Additional: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included Machine available immediately.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, dolžina mize: 6.500 mm, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 13 letvica, skupna masa: 5.500 kg, skupna dolžina: 14.800 mm, skupna širina: 2.900 mm, skupna višina: 2.525 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, delovno območje: 6.500 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, odsesavanje hlapov, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 profile and tube laser fiber laser metal cutting for fast material changeovers with up to 6kW, ideal for your production needs. An intelligent and highly effective tube laser processing solution: round tubes, square tubes, rectangular tubes, open sections, and special profiles – all laser cut. This laser machine guarantees maximum productivity during production changeovers. The task: a fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations combined with a robust mechanical structure ensure excellent cutting performance and precision. The tube and profile laser processing machine is designed for production with a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony. Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile and tube loading chain system enables rapid job changeovers. The optional bundle loader offers independent operation. Dedpfx Adeyh A Nys Ajup Bevel Cutting A feature that changes everything. With our machines’ ability to tilt the cutting head on a fifth axis up to 50°, we've solved one of the biggest challenges in modern profile processing. If the laser beam always hits the workpiece at a 90° angle, the result is an elliptical cutting edge. By enabling the tube laser cutting head to tilt, you can achieve fully angled cuts together with the feed axis. Naturally, the skyTUBE laser guarantees operational safety! The skyTUBE Pro is a class 1 laser system. There is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, nothing is more important than maximum safety and compliance with the highest standards and regulations. Technical Features: · Enclosed industrial housing; class 1 or, if required, class 4 laser · Working range for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes from 15 x 15 to 110 mm · Tube working area X 6500 / Y±100 / Z 150 / A ±360° / U ±50° · Automatic material feed for up to 6 x 160 mm profiles, lengths 3500 – 7000 mm · Automatic unloading system for profile sections, tailored to the desired profile length · Z drive system: ball screw axis with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cutting length, a standard system with max. 4.5 m automatic unloading results in a total system length of approx. 14,800 mm.

Stanje: pripravljen za uporabo (rabljen), Components per hour: 480,000, image field dimensions (FOV): 61.1 x 44.9 mm², PCB dimensions: 50–533 x 50–609 mm, PCB thickness: 0.5–4 mm, max. PCB weight: 3 kg, clamping clearance for PCB clamping: 3 mm, component clearance under the camera: 34 mm, component clearance under the PCB: 60 mm. Length: 1110 mm, width: 1351 mm, height: 1892 mm, weight: 900 kg. Without loader and unloader. On-site inspection is possible. Dujdpfxjwb E Sbo Ad Aep

Stanje: dober (rabljeno), Koenig Rex Futura II kofna valjarna. V zelo dobrem stanju, neposredno iz pekarne. Fotografije prikazujejo stroj v skladišču, pred čiščenjem. Boljše fotografije sledijo. Duedjvth Auepfx Ad Asp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, CNC RS 89.01 Debelina stekla: 3 mm - 19 mm Tehnologija: natančen CNC pomik po tirnici. Vsak disk je mogoče uporabiti večkrat in z različnimi kompenzacijami radija orodja za obdelavo steklenih plošč. Dodpfx Adjkuzzmj Ajup

Stanje: novo, Leto izdelave: 2025, If you’re looking for a genuine machine and not a toy, you’re in the right place: skyLaser Mark Laser Engraver - 2D, optionally 3D, fiber laser engraving / marking system offers the complete solution for your complex laser engraving applications. Please pay attention and compare the components installed in the different laser systems on the market: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controller, German-developed software, cabling—every component is exclusively made in Germany! Our laser systems are manufactured 100% in-house in Plauen to meet your exact requirements. Competitors often use Chinese components (starting with the controller—EZCAD, for instance, is of Chinese origin!) (* Price varies depending on configuration; this is a brand new laser machine manufactured in-house.) Dujdpfx Adobnpd Nj Aop Our skyLaser Mark systems are used precisely where conventional CO2 laser technology reaches its limits. Thanks to the fiber laser with a wavelength of 1064nm, even the finest structures can be achieved in almost any material. Unlike traditional milling processes, the laser operates contactlessly, free of applied force, and without tool wear. Benefits for your application include geometrical flexibility and high processing precision. This technology can be applied regardless of the hardness of the workpiece. The adaptable, mobile worktable increases the system’s flexibility. You can easily integrate the system into your production line or use it as a stand-alone, turnkey solution. Our skyLaser Mark provides extremely precise and durable markings (laser engravings) and is especially suitable for metals and certain organic materials. A wide range of fonts, as well as barcodes, serial numbers, logos, and images can be easily applied. Thanks to outstanding resolution, virtually any marking requirement can be fulfilled. Ideal for producing embossing stamps, engravings, labels, and fine, complex structures, the user-friendly software ensures straightforward operation. Even highly complex and demanding marking jobs can be quickly created on the included industrial PC. Precision positioning is effortless, with an optional observation camera for process monitoring and software-assisted workpiece alignment. As the system has virtually no wear parts and, thanks to IPG laser technology, is nearly maintenance-free, it is particularly suited for industrial applications and continuous operation. skyLaser marking/engraving laser overview: - Working area: from 110 x 110 mm or 120 x 120 mm, up to 300 x 300 mm (F-Theta lenses depending, 3D option available) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB SCANcube galvanometer scanner - Nominal laser power: 20W - New: software-controlled, variable working width (X axis, up to 200 mm depending on configuration) - New: software-controlled, variable working height (Z axis, up to 400 mm depending on configuration) - Optional: other working ranges, automated material feeding, etc. - Optional: additional software-controlled (Y axis, up to 320 mm depending on configuration)

Stanje: novo, Leto izdelave: 2026, The skyCUBE M / P / SL laser processing center – the new benchmark in laser material processing! (* Prices depending on configuration; this is a brand-new laser machine manufactured by us) Laser options tailored to your requirements: CO2 laser 150W / 250W / 400W or fiber laser 1500 – 6000W PFEIFER laser processing center skyCUBE Djdpfx Adebnphvs Aeup Working areas: Mclass = X 1250 x Y 650 x Z 100 mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm skyCUBE laser processing center – the new multifunctional laser engraving and cutting machine – laser processing made easy, high-precision, with fast and high-quality laser engraving and cutting. Our latest and best all-rounder impresses even the most experienced operator with its innovative design. This CO2 laser / fiber laser demonstrates outstanding performance in all industrial applications, serving as both a CO2 or fiber laser engraver and as a CO2 or fiber laser cutter. With an optional laser power of up to 1500W (1.5kW), the CO2 laser device / fiber laser system is extremely flexible for deployment in your production processes. skyCUBE laser systems comply fully with class 1 requirements according to DIN EN 60825-1, ensuring the highest safety standards. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving a wide range of materials, such as various metals, acrylic glass, solid wood and wood-based materials, composite woods, paper, cardboard, various plastics and foams, textiles, and much more. The outstanding build quality of the laser machine, 100% manufactured in Plauen, Germany, ensures laser users – from metalworking to laser source – high working precision with consistently high quality. Cutting speeds of up to 8000 mm/s and engraving speeds of up to 4000 mm/s produce clean, sharp cut edges and precise laser engravings thanks to superior laser technology. The ergonomic design with an extendable work table facilitates easy loading of the system. A drawer at the bottom of the machine is provided for collecting cut materials. User-friendly and intuitive – the supplied skyCUBE PC software (ready for Windows®). A simple, practical interface, adapted to Windows standards, enables efficient operation. High system stability, professional machine monitoring and control, and compatibility with common file formats characterize the software. Data output occurs via layers – individually for each layer, including the definition of sequences and processing types. Parameters such as laser power and processing speed are saved automatically for each layer and can be accessed and reproduced at any time via a material database. With a computer connected via LAN / USB interface, laser projects are transferred to the skyCUBE M laser processing center, where they can be executed repeatedly without the need to keep the PC powered on. A modern touch control panel provides access to all system information and functions.

Stanje: novo, Leto izdelave: 2025, PFEIFER technology skyCUBE P class 1250 x 1250 mm - 200W CO2 Laser Flatbed Laser Center (* Price depending on configuration; this is a brand-new laser machine manufactured by us) The multifunctional flatbed laser center skyCUBE, developed and produced by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting tasks and classic laser engraving. It combines high productivity with economy and precision, ensuring your investment pays off within a short time. The machine housing, made from welded and bolted steel construction, is engineered for industrial and commercial use. The drive system developed by PFEIFER technology guarantees precision and high repeat accuracy. skyCUBE laser systems comply with all Class 1 requirements in accordance with DIN EN 60825-1, offering you maximum safety. The ergonomic design with a pull-out worktable facilitates loading the machine. A drawer at the bottom of the machine is used to collect cutting waste. Simple, user-friendly, and intuitive – the skyCUBE PC software makes planning, execution, and control of your production tasks effortless. Your project data is processed in layers (colors), with the order and type of processing individually set for each layer. Determined parameters can be permanently stored and retrieved from a material database. A computer connected via LAN/USB interface is used to transfer laser programs to the machine controller. All system information and functions are accessible via a modern touch control panel. Overview of skyCUBE Laser Processing Center: - German industrial standard machine steel construction for secure, vibration-free mounting of laser components and axis systems, on rollable industrial leveling feet - 8" touchscreen display: see more, control more, communicate more with the skyCUBE laser processing center - Redundant safety system – Class 1 laser - Safety: Shutter – active mechanical beam path closure - Pull-out worktable drawer - Integrated access and observation hatch - Pull-out scrap collection drawer - Air-flushed optics – filtered air supplied to all laser components to protect the optics - Programmable process gas control - Drive system developed by PFEIFER technology for precision and high repeat accuracy - PFEIFER technology mirrors and optics for perfect engraving and cutting results - CO2 lasers: IRADION®, SYNRAD® – laser sources for perfect beam quality and reliability over extended periods - Certified, stable branded power supplies according to the laser source - Illuminated machine interior - Easy to learn operation, even without advanced CAD knowledge - Safety: BG-certified emergency stop / door and safety monitoring - Safety: Key switch to prevent unauthorized use of the system - Central vacuum extraction connection for engraving/cutting fume extraction - Multifunctional cutting table with low-reflection, removable supports for laser material processing Djdpfxjcwpkpe Ad Ajup Optional: - Laser source and optics system tailored to application requirements - PFEIFER technology linear motor (for X-/Y-axis)

Stanje: novo, Leto izdelave: 2025, Are you looking for a real machine and not a toy? Then you’ve come to the right place: Film labelers – Label printers – Nameplate marking machines (*Prices vary depending on configuration and laser power; this is a brand-new laser machine manufactured in-house) Laser Marker skyLASER Mark 500 – 2D Fiber Laser Engraving/Marking System: The complete solution for your complex laser engraving applications. Important: Compare the installed components in available laser systems. We use ONLY top-quality German-made components: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, cabling – all components produced exclusively in Germany! All machines are 100% custom-built at our factory in Plauen according to your specifications! Competitors often use Chinese components (note: the controller is often EZCAD = Chinese origin!!) (*The stated price may vary depending on configuration; pictures show different equipment variants. You receive a brand-new laser unit, manufactured by us.) Our skyLASER Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The fiber laser with a 1064nm wavelength enables even the most intricate work on almost any material. Unlike traditional milling processes, the laser works contact-free, force-free, and with no tool wear. The clear benefits for your application: geometric flexibility and high processing accuracy. This processing method can be applied regardless of the workpiece’s hardness. The mobile, customizable working table further increases system flexibility. Easily integrate the system into your production line or use it as a stand-alone solution. Our skyLASER Mark units deliver extremely precise and durable markings (laser engravings) and are especially suitable for metal marking and selected organic materials. Dujdpscuiz Tjfx Ad Aep A wide range of fonts, barcodes, serial numbers, logos and images can be applied effortlessly. Thanks to excellent resolution, virtually all marking requirements are met. Whether you need embossing dies, engravings, labels or complex fine structures – our extremely user-friendly software makes it easy. Even demanding, intricate marking tasks are quick and simple on the included industrial PC. Accurate positioning is straightforward, thanks to the optional process monitoring camera and software-assisted part alignment. With virtually no wear parts and IPG laser technology for near-zero maintenance, this system is ideal for industrial and continuous operation. skyLASER Mark Marking/Engraving System at a glance: - Working area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (depending on F-Theta lenses/3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W - New, optional: software-controlled, variably adjustable working width (X-axis max. 450 mm depending on configuration)

Stanje: novo, Leto izdelave: 2025, If you are looking for a genuine industrial machine and not a toy, you have come to the right place: (* Pricing depends on equipment and laser power; this is a brand new laser machine from our production) Duodocuiz Sepfx Ad Asp Foil Marker – Label Printer – Nameplate Machine The skyLASER Mark 500 Laser Marker – 2D Fiber Laser Engraver / Marking Laser is the complete solution for your complex laser engraving applications. (* The price indicated may vary depending on equipment; the images show different equipment variants; you will receive a factory-new laser machine from our own production) Our skyLaser Mark systems are used precisely where conventional CO2 laser technology reaches its limits. Utilizing a fiber laser with a wavelength of 1064 nm, even the most intricate structures can be achieved on almost any material. In contrast to conventional milling processes, the laser operates contact-free, force-free, and without tool wear. The advantages for your application are geometric flexibility and high processing accuracy. This type of machining can be used regardless of the hardness of the workpiece. With the mobile and adaptable work table, which can be tailored to your requirements, the system’s flexibility is further increased. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Mark systems deliver very precise and permanent markings (laser engravings) and are specifically suitable for metals and certain organic materials in specialized laser applications. A wide range of fonts can be used, and applying barcodes, serial numbers, logos, as well as images is effortless. Thanks to excellent resolution, nearly all marking requirements can be met. From making embossing stamps, engravings, inscriptions, and complex fine structures, the software is extremely user-friendly. Even very complex and elaborate marking tasks can be created easily on the included industrial PC. Precise positioning is managed quickly and easily – an optional monitoring camera for process tracking and software-assisted workpiece alignment is available. Since the system features hardly any wear parts and, thanks to IPG laser technology, is almost maintenance-free, it is particularly suitable for industrial applications and continuous operation. Overview of the skyLaser Marking / Engraving Laser: - Processing area: from 110 x 110 / 120 x 120 or 300 x 300 mm (F-theta lenses depending / 3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W - New, optional: software-controlled, variable adjustable working width (X axis max. 450 mm, depending on configuration) - New, optional: software-controlled, variable adjustable working height (Z axis max. 200 / 450 mm, depending on configuration) - Additional working areas available optionally – automatic material feed, etc. - Air cooling due to low energy consumption - Marking speed: up to 8,000 mm/s (SCANLAB dynAXIS® galvanometer scanners with SCANcube® 10 achieve marking speeds of up to 640 characters per second) - Redundant safety system - Laser class: 1 or, depending on configuration, laser class 2 (with optional pilot laser)

Leto izdelave: 2025, stanje: novo, številka stroja/vozila: AB2024, Pclass = Working area X 1250mm x Y 1250mm x Z 100mm (* Pricing depends on configuration and laser power; this is a brand-new laser machine from our own production) skyCUBE M, P, SL – Laser processing center – the new M, P or SL SLclass = Working area X 1250mm x Y 2550mm x Z 100mm class, more productive with a larger work area as a laser cutting machine for your metal processing Laser processing made easy and highly precise – laser engraving, cutting with high speed and quality Duodpfxsdvik Ne Ad Aep

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2021, 3D AC SERVO SkyCNC WK Series CNC Milling Machine – 2050 mm x 3050 mm x 220 mm High-precision – milling and drilling at extremely high speed and quality. As a CNC milling machine manufacturer, Pfeifer Technology, with the SkyCNC CNC milling and engraving machines, is your experienced partner. Our PFEIFER technology SkyCNC WK series milling machines, equipped with high-precision ball screw drives on all axes, deliver maximum accuracy, precision, and speed – all at an attractive price-performance ratio. Thanks to the robust steel base frame (approx. 4 t), these machines offer high static rigidity, enabling trouble-free processing of solid wood and various metals. The sophisticated arrangement and distribution of 35 mm linear rails and guides, along with the massive gantry featuring vibration-damping properties, are distinguishing features of our CNC milling machines. All machine components and servo drive units are the result of years of development and experience. The powerful servo motors are highly efficient and backlash-free, directly coupled to the German-manufactured precision ball screws, guaranteeing a zero-backlash drive system to satisfy the highest requirements. The advanced freely programmable CNC controller, equipped as standard on all PFEIFER technology SkyCNC WK series milling machines, allows for flexible intervention via touchscreen under all production conditions. With this CNC control system, you can generate your milling data, import CAD/CAM data, and process them independently of a computer. Options such as an automatic tool changer (up to 16 tools), a solid aluminum vacuum table, various tool/workpiece cooling solutions, automatic lubrication system for all axes, and many other intelligent features round off this milling system. With the PFEIFER technology SkyCNC WK series, you receive a reliable and powerful large-format gantry milling system for your applications. Upon request, we can supply corresponding CAD/CAM ARTCAM SKYCNC control software: 2.5/3D PFEIFER SKYCNC Milling & Engraving Software in German for Windows® operating systems, or ArtCAM Pro/ArtCAM Insignia software in German/Russian and other languages upon request. Technical Data: - Drive system: high-precision ball screws on X, Y, and Z axes made from German precision production - Working speed: 15 m/min - XYZ working travel: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum channels): 2000 x 3000 x 30 mm - XYZ repeatability: 0.02 mm - XYZ accuracy: 0.01 mm - Software compatibility: Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Options: Spindle motor / tool changer / vacuum table as per customer requirements - Warranty: 1 year - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6000 – 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC servo motors on all axes - Tool changer: 4–8 magazine positions - PDSP control RTU / MTU (Remote Terminal Unit) Dodebnpgxepfx Ad Ajup - Power supply: AC400V±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 4500 (L) x 3100 (W) x 2500 (H) mm - Weight: 4000 kg

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine – 1250 mm x 1250 mm x 220 mm High precision – High-speed milling and drilling with exceptional quality. (* Pricing depends on equipment; this is a brand-new laser machine manufactured by us) As a CNC milling machine manufacturer, pfeifer-technology with skycnc CNC milling and engraving machines is your partner. Our PFEIFER technology skycnc WK series milling machines with ultra-precise ball screw drives on all axes ensure maximum precision, accuracy, and speed – at an excellent price-performance ratio. With its heavy-duty steel base frame (approx. 2.2 t), the machine achieves exceptional static rigidity, making the processing of solid wood and various metals straightforward. The sophisticated alignment and distribution of 35mm linear rails and guides, together with the massive, vibration-dampening gantry, are distinguishing features of our CNC milling machines. The advanced, freely programmable CNC control system enables flexible operation via touchscreen under any production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this control system, you can generate your machining data or import CAD/CAM data and then process them independently of a PC. The tool changer (up to 16 tools), solid aluminum vacuum table, various cooling solutions for tools and workpieces, automatic lubrication for all axes, and other refined details complete this milling system. With the PFEIFER technology skycnc WK series, you receive a reliable and high-performance large-format gantry milling system for your applications. - Drive system: high-precision ball screw drive on X, Y, and Z axes, precision manufactured - Working speed: 15 m/min - xyz working/travel area: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum channels): 1220 x 1220 x 30 mm - xyz repeatability: 0.03 mm - xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM, etc. - Formats: ISO standard G-code, FANUC compatible - Options: spindle motor/tool changer/vacuum table as per customer requirements - Warranty: 2 years - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6000 – 24000 rpm (depending on requirements) - Spindle interface: BT 30 4ea ER20 (other interfaces optional) Duede Sd U Depfx Ad Aep - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine positions - Power supply: AC400 V ±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 2670 (L) x 1735 (W) x 1790 (H) mm - Weight: 2,700 kg

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 390 mm, pomik osi Y: 230 mm, pomik po osi Z: 300 mm, hitrost vretena (min.): 2.000 obr/min, največja hitrost vretena: 24.000 obr/min, skupna masa: 450 kg, premer orodja: 14 mm, trajanje garancije: 24 meseci, moč: 2 kW (2,72 KM), Are you looking for a genuine milling and engraving machine that provides powerful and precise milling – a true milling machine, not a toy? Then you've come to the right place: immediately ready for use, suitable for engraving, milling, and drilling, ideal for effective machining of plastics and light metals. CNC DIN ISO G-code milling machine including intuitive CNC control Working area: with T-slot table X = 390 mm, Y = 230 mm, Z = 300 mm Machine base made from cast components, approx. 280 kg With base cabinet for essential machine assemblies, such as cooling system, power supplies/inverter, and control unit, approx. 170 kg All axes equipped with ball screw drives and 25 mm linear guides Including dust cover and manual central lubrication for all axes Including encoder-monitored axis drives! High-frequency spindle up to 24,000 rpm, 2 kW, water-cooled ER20 collet chuck for tools up to max. 14 mm - Optionally, G-code controlled minimum quantity lubrication - Optionally, G-code controlled extraction system - Optionally, G-code controlled vacuum table solution (* Price depends on configuration, control system, and spindle; this is a brand-new milling machine from our own manufacturing) All milling machines are manufactured to customer specifications at our factory in Plauen – 100% made in Germany! Images show various equipment options; you will receive a brand-new milling machine from our own production. Technical Specifications: · Drive system: high-precision ball screw Duedpfx Adsi Hb I Ts Ajp · Working speed: max. 6,000 mm/min · X-Y-Z working/travel area: 390 mm x 230 mm x 300 mm · Clearance height: 300 mm · X-Y-Z step increment: 0.01 mm/step · X-Y-Z repeatability: 0.02 mm · File formats: G-code, ISO data · High-frequency spindle: 2.2 kW water-cooled (other options available) · Spindle speed: 6,000 – 24,000 rpm · Tool holder: ER20 · Power supply: AC 240V, 50 Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight: approx. 475 kg with base cabinet

Stanje: novo, Leto izdelave: 2025, The skyCUBE M laser processing center – the new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser – available immediately Mclass = Processing area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunction laser engraving and cutting machine – easy laser processing, high precision – laser engraving and cutting with high speed and quality. Our new and best multifunctional system impresses even the most experienced user with its innovative design. This CO2 laser/fiber laser demonstrates outstanding performance in all industrial applications as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser. With an optional laser power of up to 1000W (1kW), the CO2 laser device/fiber laser system is extremely versatile for use in your production environment. skyCUBE laser units comply with all requirements of Class 1 according to DIN EN 60825-1, offering you maximum safety. Depending on the selected and installed laser power, this CO2 laser/fiber laser is perfectly suited for cutting and engraving a wide range of materials such as metals, acrylic glass, solid wood and wood composites, wood-based materials, paper, cardboard, various plastics and foams, textiles, and much more. The excellent engineering – 100% produced in Plauen – guarantees users from metal fabrication to laser source a high working accuracy with consistently high quality. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology ensures clean, ultra-sharp cutting edges and precise laser engravings. The ergonomic design featuring a pull-out worktable simplifies loading the machine. A drawer in the lower section collects processed material efficiently. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A straightforward, practical user interface adapted to the Windows standard enables fast and effective operation. High system stability, professional monitoring, efficient machine operation and control, as well as compatibility with conventional file formats characterise the software. Data output is organised by layers – each layer defined separately, including sequencing and process type. Parameters such as laser power and processing speed are automatically stored for each layer and can be retrieved from a materials database at any time. Laser projects are transmitted to the skyCUBE M processing center via a computer connected through LAN/USB interface. Projects can be executed repeatedly, even without the PC being on. A modern touch control panel provides access to all system information and functions. skyCUBE M Laser Processing Center at a glance: - German industrial-standard welded steel construction for secure and vibration-free mounting of laser components and axis systems, equipped with mobile industrial leveling feet - 8" touchscreen display – better overview, more control, enhanced communication with the skyCUBE M laser processing center Dsdps Sfanjfx Ad Aeup - Redundant safety system – Class 1 laser

Stanje: novo, Leto izdelave: 2025, 2D / 3D laser engraver skyLaser Mark - 2D with optional 3D fiber laser engraving/marking system is the complete solution for your complex laser engraving applications. Duedpj Sd Ubofx Ad Ajp

Stanje: novo, Leto izdelave: 2025, skyLaser Mark – Laser Engraving System 2D, optional 3D, Fiber Laser Engraving / Marking Laser – the complete solution for your complex laser engraving applications. Important: Please compare the installed components in the available laser systems: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, wiring – all components are exclusively German-made! The laser systems are 100% manufactured at our factory in Plauen, according to customer specifications! Competitors frequently use Chinese components (starting with the controller: EZCAD = Chinese origin!). (* Pricing depends on configuration. This is a brand-new laser machine, manufactured in-house.) Dujdpfx Adjbv Daye Ajp Overview of the skyLaser marking / engraving laser: Processing area: from 110 x 110 mm, 120 x 120 mm or 300 x 300 mm (F-Theta lenses variable, 3D option possible) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W / 30W / 50W New: Software-controlled, variably adjustable working width (X axis max. 200 mm, depending on design) included New: Software-controlled, variably adjustable working height (Z axis max. 400 mm, depending on design) included Optional: Other working areas – automatic material feed, etc. Air cooling due to low energy consumption Marking speed: up to 5000 mm/s (SCANLAB dynAXIS® galvanometer scanner and SCANcube® 10 can achieve marking speeds of up to 640 characters per second.) Redundant safety system Laser class: 1 (or class 2 depending on configuration and optional pilot laser) pfeifer-technology HQ mirrors and optics for optimal results, powered by Scanlab® pfeifer-technology industrial PC including pre-installed control software New: Including Laser Focus Finder New: Including process air management Optional: Positioning laser – integrated diode laser for optimal alignment New: F-Theta lens 110 x 110 mm working area with protective glass included (optionally expandable to 120, 180, or 350 mm) Practically maintenance-free Main features: Get inspired and request our product video featuring your sample production! Model: Engraving Laser skyLaser Mark IPG Laser Working area: 100 x 100 mm or 120 x 120 mm (F-Theta 160 mm), other sizes optional Laser power: 20W / Optional: 30W / 50W (air-cooled) Laser type: Ytterbium Pulsed Fiber Laser Engraving speed: < 5000 mm/s Engraving depth: varies by material (we are happy to test your application) Wavelength / frequency: 1.064 μm / 20 to 80 kHz (adjustable) Cooling: air-cooled Software: skyLaser marking software V5.x, pre-installed on included industrial PC Warranty: 2 years Technical specifications: Applications: Depending on surface and pigmentation, suitable for anodized aluminum, V2A stainless steel, lacquered brass, steel, various plastics, models, promotional products, decorative items, toys, machine front covers, control elements Not suitable for glass or acrylic! Power supply / consumption: 230 V~ 50Hz 6A / max. 300W (without extraction unit, optional) Physical properties: System housing dimensions (2013): Height 1950 mm x Width 1080 mm x Depth 720 mm Weight: 100 kg – 400 kg depending on system configuration

Stanje: novo, Leto izdelave: 2025, Are you looking for a real machine and not a toy? Then you’re in the right place: Duedpfx Asf U Spxed Aep Fiber Laser Engraver Large Format X1130 x Y665 x Z260 mm skyLaser Mark Laser Marker – 2D, optionally 3D. This fiber laser engraving/marking system is the complete solution for your complex laser engraving applications. Important: Compare the components installed in the laser systems offered! Our systems feature Scanlab® scanners, IPG Photonics® lasers, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, wiring—every component is German-made! Laser systems are manufactured 100% to customer specifications at our factory in Plauen. Competitors often use Chinese components (it starts with the controller: EZCAD = Chinese origin!) (* Prices vary depending on configuration—this is a brand-new laser machine, manufactured in-house) Our skyLaser Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The 1064 nm fiber laser enables even the most intricate structures to be produced in almost any material. Unlike traditional milling processes, laser processing is contactless, force-free, and causes no tool wear. Key advantages for your application include geometric flexibility and high machining precision. This processing method can be applied regardless of the hardness of the workpiece. With the adjustable, mobile workstation tailored to your requirements, system flexibility is further increased. The system can be seamlessly integrated into your production line or used as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings), optimized especially for the laser application areas of metal and specific organic materials. A wide range of fonts, application of barcodes, serial numbers, logos, and images are easily possible. Thanks to outstanding resolution, virtually any marking requirement can be met. Applications include the production of embossing stamps, engravings, markings, and complex, delicate structures. The software is extremely user-friendly. Even very complex and demanding marking jobs can be effortlessly created on the included industrial PC. Exact positioning is a breeze thanks to the optional process-monitoring camera and software-driven workpiece alignment. With almost no wear parts and the virtually maintenance-free IPG laser technology, this system is especially well-suited for industrial applications and continuous operation. skyLaser Marking Laser Engraver at a glance: - Work area: starting at 110 x 110 mm or 120 x 120 mm – or the fiber laser engraver large format with integrated axes X1130 x Y665 x Z260mm - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB SCANcube galvanometer scanner - Nominal laser power: 20W - New: Software-controlled, variably adjustable working height (Z axis, max. 260 mm, depending on configuration) - Optional: other working areas, automated material feed, etc.

Stanje: novo, Leto izdelave: 2025, Are you looking for a genuine nameplate laser marking machine and not a toy? Then you are in the right place: (* Prices depend on equipment and laser power; this is a brand-new laser machine manufactured by us) skyLaser Mark Laser Marker - 20W 2D software, optional 3D fiber laser engraver/marking laser is the complete solution for your complex laser processing needs - Nameplate Laser Machine Please note, compare the installed components in the offered laser systems: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components are exclusively made in Germany! The laser systems are 100% custom-built to customer specifications at our plant in Plauen! Competitors often use Chinese-made components (starting with the controller: EZCAD = Chinese origin!) (* The price may vary depending on configuration. Images show different equipment options. You will receive a brand-new laser machine directly from our factory.) Ideal solution for: - Product marking - Laser marking - Laser engraving - Laser cleaning - Laser ablation Our skyLaser Mark nameplate laser systems are used exactly where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the finest structures can be created in almost any material. The advantage in your application is geometric flexibility and high processing accuracy. Regardless of the hardness of the workpiece, this type of processing can be applied. The adjustable and mobile worktable further increases system flexibility. You can easily integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark provides highly precise and durable markings (laser engravings) and is especially suitable for the nameplate laser machine application area: metals and certain organic materials. A wide variety of fonts can be used, and applying barcodes, serial numbers, logos, and images is effortless. Thanks to the outstanding resolution, virtually all marking requirements can be fulfilled. The production of embossing stamps, engravings, labels, and complex fine structures is made easy with extremely user-friendly software. Even very complex and demanding marking tasks can be easily set up on the supplied industrial PC. Precise positioning is quick and simple, thanks to the optional observation camera for process monitoring and software-assisted workpiece alignment. As the system has virtually no wearing parts and, thanks to IPG laser technology, is nearly maintenance-free, it is particularly suitable for industrial applications and continuous operation. skyLaser Marking/Engraving Laser at a Glance: Working area: from 110 x 110 mm, or 120 x 120 mm, up to 300 x 300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Dedpfjdgfgcex Ad Asup Nominal laser power: 20W