DrDryice oprema za suho ledom - suhi led suha ledena oprema

Cold Jet Aero 30 1-year warranty

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Rjdpfx Agsph Uk Nj Top Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 37.684 h, največja hitrost vretena: 18.000 obr/min, skupna masa: 30.000 kg, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 900 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, število osi: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travel ranges of approximately 1,200 mm in X, 1,300 mm in Y, and 900 mm in Z. The machine is equipped with an NC rotary tilting table with a diameter of 1,350 mm and a spindle speed of 18,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HERMLE C60U Dynamic universal machining center we are offering for sale. Contact us for further details. • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Rated current: 113 A • Power consumption: 78 kVA • Circuit diagram No.: 1-325-MS-96-021 • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC rotary tilting table • Table diameter: Ø 1,350 mm • Table size: 1,350 × 1,100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) • Operating hours: 37,684 h • Spindle replaced approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools, and zero-point clamping systems shown in the pictures are not included in the scope of delivery Additional equipment • Coolant through the spindle, 80 bar (high pressure) • Air blast device Rsdeylzc Njpfx Ag Tjp • Air through spindle center • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM

Leto izdelave: 1988, Stanje: rabljeno, Compressor unit Type 178 A CD E Delivery rate: 4,760 l/min Redpfx Agegw Dqpj Tjp Operating pressure: 9 bar Power: 30 kW

Stanje: rabljeno, Leto izdelave: 2016, Technical details: Rodpfx Aeudf Evjg Tjp Weight: 22 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Stroj je v odličnem stanju, zelo dober stroj. Gre za kombiniran stroj – peletirko in peskalni stroj (dva v enem). Zelo malo obratovalnih ur. Redpfx Ajhmi Ucjg Tep

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Kaeser SM 9 - 11 bar Screw Compressor Manufacturer: Kaeser Model: SM 9 Machine type: Compressed Air Screw Compressor Year of manufacture: 2010 Rodpfx Agshy Tzys Top Condition: Used screw compressor, ready for operation Max. operating overpressure: 11.0 bar Free air delivery: 0.75 m³/min Motor power rating: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions (W x D x H): approx. 630 mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: Ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, TEHNIČNI PODATKI - Plošča - Zunanji premer: 750 [mm] - Notranji premer: 150 - Glavna moč motorja: 4 [kW] - Napajalna napetost: 380 [V] - Skupna pogonska moč: 3,6 [kW] TEŽA IN DIMENZIJE - Potreben prostor: 1100 x 1700 [mm] - Višina stroja: 2000 [mm] - Teža stroja: 1100 [kg] - Število ur: 5160 [h] Rodpfoxb Em Nex Ag Tjp

Stanje: rabljeno, Leto izdelave: 2015, Pass-through width: 580 mm Pass-through height: 580 mm Air requirement: 400 - 800 l/min Operating pressure: 3.4 - 8.0 bar Extraction capacity: 17.4 m³/h Total power requirement: 1.2 kW Machine weight: approx. 115 kg Space required: approx. 1225 x 935 x 1640 mm Description - Suitable for various blasting media, e.g. quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality work gloves made of latex are firmly attached to the housing - Optimal visibility and work safety during workpiece processing thanks to a viewing window with attached protective film Rjdpow Rrcwofx Ag Tsp - Dust-free operation due to continuous seals on lid and door frames - Stable support grid enables placement of workpieces inside the cabin - With drain opening for changing the blasting media - Suction tube for blasting media fixed at the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting media, corundum, silicon carbide, and plastic blasting media can be used Equipment details: - Very large front flap opening upwards with gas struts for quick and easy loading and unloading - Integrated extraction unit with replaceable air filter - Blast gun without trigger – air flow is controlled via foot pedal - Two fluorescent lamps (230 Volt) in a separate housing with protective glass and replaceable protective film, including five spare films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure is regulated via pressure regulator with manometer

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotor is a machine designed for spray cleaning and flood washing operations. The basket can be loaded into the chamber either manually or automatically. Both the rotation speed of the basket and the type of movement—continuous rotation or oscillation—can be adjusted. Hot air drying is included as standard, with optional vacuum drying available as an upgrade. In this configuration, the system is equipped with two separate tanks: one for washing fluid and one rinse tank. Specifications: Cleaning area: 300 x 450 mm, height 300 mm Load capacity: 50 kg System external dimensions: Width: 140 cm, Depth: 220 cm, Height: 220 cm Loading weight: 50 kg Tank 1 capacity: 500 l Redpel Rbk Rofx Ag Tep Tank 2 capacity: 500 l Pump 1: 1.5 kW, 2.5 bar, 200 l/min Pump 2: 1.5 kW, 2.5 bar, 200 l/min Tank 1 heating: 16 kW Tank 2 heating: 16 kW Steam condenser: 0.20 kW Tank drain pump: 0.37 kW Drying: 7.5 kW Ultrasonic (peak/effective): 2 kW/1 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, mazak j-200s technical data The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) designed for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {Ø500 mm}, and a machining length of up to {910 mm}. The B-axis offers a swivel range from {-30°} to {+190°}. Main technical data (Integrex j-200S): Machining capacity: - Max. swing diameter: {530 mm} - Max. machining diameter: {Ø500 mm} - Max. machining length: {910 mm} Main spindle & sub-spindle: - Chuck size (main & sub-spindle): 8 inches - Main spindle speed: {5,000 min⁻¹} - Main spindle power (40% duty cycle): {18.5 kW} Milling spindle (B-axis): - Speed: {12,000 min⁻¹} (typical for j-series, partially optional values) - Swivel range: {-30°} to {+190°} (i.e. 220° total range) - Tool interface: KM63 or CAPTO C6 Axes & capacity: - Y-axis stroke: {200 mm} ({±100 mm}) - X/Z axes: {450 mm} / {1119 mm} - Tool magazine: 20–36 tools (depending on configuration) Control: MAZATROL SmoothG or Matrix Nexus 2 Redpfjyfgdljx Ag Tjp The machine features full C-axis capability for both spindles and an automatic tool changer, making it ideal for highly productive applications in a compact design.