Multimaster Cas 52 nakup rabljenega (24.397)

Stanje: dober (rabljeno), Leto izdelave: 2002, Width: 52 cm Year of manufacture: 2002 automatic paper folding machine Kdjdpfx Ahevphm Ss Dou computer control with monitor flat pile feeder FSA 52 with suction head 1st unit: 4 folding plates, 52 cm integrated knife shaft delivery unit: 4 folding plates, 52 cm 3rd unit: 2 folding plates, 38 cm stream delivery Delivery time: short notice

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, Overhauled folding machine, year of manufacture 2002, in absolutely as-new top condition. Counter reading: 23 million, rollers as-new. Ksdpfx Aewctuyjh Dodu Formats: min: 110 x 100 mm, max: 520 x 850 mm. Smallest folding length: 35 mm. Up to 60 jobs can be stored. First folding unit with 4 automatic folding pockets, automatic roller and stopper adjustment. Steel segment rollers, rollers as new. FSA flat pile feeder with side air blast. Pico compressor. AM 52 shingled delivery. Bridge. 380 Volt / 16 A, all maintenance-free three-phase motors. Original images, machine currently located in our showroom. Can be inspected and tested at any time. 1 year warranty on electronics. Available: immediately.

Stanje: dober (rabljeno), Leto izdelave: 2006, max. format 38 x 65 cm Year of manufacture: 2006 Computer control with monitor Flat pile feeder with suction head Kdsdpfet T Nc Eex Ah Dsu 4 folding pockets in the parallel folding section automatic folding pocket adjustment subsequent knife shaft stream delivery Delivery time: immediately ex stock

Stanje: rabljeno, Leto izdelave: 2001, The Mathias Baeuerle CAS 52-B is a highly advanced and efficient folding machine designed for precise and automated folding jobs. Manufactured in 2001, the machine is currently in stock in Germany. It features four folding plates in the first unit and an automatic folding plate setting for accurate and consistent folding results. The CAS 52-B is equipped with an automatic paper thickness measurement, an operator panel with seven pre-programmed standard folds, and an electronic double-sheet detector to prevent errors. It offers a flat pile feeder for smooth material handling and a computer-controlled MB CAS 52 Multimaster folding unit for precise and repeatable folding operations. Thanks to a memory for 60 repeat jobs, the machine can also handle large order volumes efficiently. The CAS 52-B also features semi-automatic folding roller adjustment and a mobile delivery unit for added versatility and user convenience. It can process materials up to a size of 520 x 850 mm. Kdjdowdww Uspfx Ah Deu Format: 520 x 850 mm Equipment: - 4 plates in the first unit - Automatic folding plate setting - Automatic paper thickness measurement - Control panel with 7 pre-programmed standard folds - Electronic double-sheet detector - Flat pile feeder - MB CAS 52 Multimaster computer-controlled folder - Memory for 60 repeat jobs - Mobile delivery unit - Semi-automatic folding roller adjustment

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Naprava je tehnično popolnoma brezhibna s sprejemno mizo MB CAS AM52 (kratka). V stalni uporabi. Kdsdpsxcwb Uefx Ah Deu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj je MB Bäuerle zgibalni stroj iz leta 2013. Stroj trenutno zanesljivo deluje v naši proizvodnji in je v dobrem stanju. Enak stroj je dodatno na zalogi in na voljo. Rezervni deli za zgibalni stroj so pri nas prav tako na zalogi in so na razpolago po potrebi. Celoten sklop je sestavljen iz več strojev, ki jih najdete v naših drugih oglasih. Ksdpjw Hqhxsfx Ah Dedu V primeru zanimanja vas vabimo, da nas kontaktirate za dogovor o ogledu. Cena po dogovoru.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Folding machine with excellent equipment First folding unit with 4 pockets and fully refurbished steel segment rollers Second folding unit with 4 pockets and fully refurbished steel segment rollers Rollers in both units were replaced 6 million cycles ago Automatic pockets, stop adjustment, and roller adjustment Formats: Min.: 100 x 120 mm Max.: 520 x 580 mm Smallest fold length: 35 mm FSA flat pile feeder Ksdpfx Aheum Iz Hs Dsdu Sheet run monitoring Double sheet control Up to 60 jobs storable Shingled delivery 30 million total cycles New soundproofing Year of manufacture: 2004 Machine is in excellent condition Completely overhauled – under our service care for 10 years

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Dust extraction connection Extraction port diameter (thickness): 150 mm Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Kdedpfsd Hx E Ijx Ah Dju Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2024,

Stanje: novo, - Large jointer tables made from grey cast iron - The adjustment of the jointer tables is performed via a precise parallelogram system, ensuring that the distance between the table edges and the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° - The fence tilt angle can be read directly from the operator’s position - Supplied as standard with auxiliary fence - Large four-knife cutterhead, precision-mounted - Smooth operation due to precision unit and heavy cast design - Powerful industrial motor - Maximum user safety with simple operation - Chip removal indicator via scale - Manual table adjustment - Motor protection switch Equipment Details - Including fold-down auxiliary fence for narrow workpieces - Manual quick adjustment of chip removal with scale and locking knob Guard Device - The guard device is foldable and designed so that the operator is not hindered during work yet remains protected TERSAs models with Tersa planer cutterhead system - No adjustment or screwing required - Planer knife change in seconds - Self-locking - Exceptionally low noise Kdjdsu T Hrcepfx Ah Dou - Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2750 mm - Width/Depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. chip removal, jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilting range: 90 – 45 ° Extraction Connection: - Extraction port diameter, thicknesser: 120 mm Setup Information: - Required length: 2750 mm - Required width/depth: 1604 mm - Explanation of required space: The dimensions take into account maximum travel or working lengths. Electrical Data: - Drive motor power: 7 kW - Connection voltage: 400 V - Network frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Planer table length: 2720 mm Adjustment of planer table: Lever Hollow and pointed joint adjustment: No Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Kodogr Udvopfx Ah Dsdu Weight: 870 kg

Stanje: rabljeno, Leto izdelave: 2021, Used machine Year of manufacture: 2021 Like-new condition Equipment and technical data: Total table length: 2720 mm Infeed table length: 1498 mm Maximum planing depth (joiner): 8 mm Jointer fence length: 1200 mm Jointer fence height: 190 mm Jointer fence swivel range: 90 – 45° Dust extraction connection: Extraction port diameter (thicknessing): 120 mm Installation information: Kedpjwka Txefx Ah Dsdu Required space, length: 2750 mm Required space, width/depth: 1604 mm Note on required space: The dimensions take maximum travel paths or working lengths into account. Electrical data: Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5,000 rpm Maximum planing width: 520 mm Dimensions and weights: Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 720 kg Availability: short-term Storage location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° Ksdpjff Efcefx Ah Dsdu The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2021, New machine Year of construction: 2021 Features and technical data: Dimensions and weights Length (product) approx.: 1170 mm Net weight approx.: 660 kg Width/depth (product) approx.: 1003 mm Extraction connection Extraction port diameter thicknesser: 150 mm Installation information Required length: 1170 mm Machine body width/depth: 705 mm Required width/depth: 1003 mm Working area length: 1000 mm Required height: 1197 mm Working area width/depth: 2000 mm Note regarding space requirements: The dimensions take into account the maximum travel paths or usable area. Please add the specified dimensions to the indicated space requirement to obtain the recommended free installation area for the machine. Machine body length: 1170 mm Thicknesser Kedpfekwg Unjx Ah Dodu Thicknessing table length: 520 mm Max. working height thicknesser: 250 mm Thicknessing table width: 1000 mm Min. working length thicknesser: 210 mm Min. working height thicknesser: 3.5 mm Max. chip removal thicknesser: 8 mm Electrical data Drive motor power: 7.5 kW Mains frequency: 50 Hz Connection voltage: 400 V Cutterhead type: TERSA Cutterhead speed: 4,500 rpm Cutterhead diameter: 120 mm Max. planing width: 520 mm Number of planer knives: 4 pcs. Feed speed: 5/8/12/18 m/min Location: Hochheim Availability: Short notice

Stanje: rabljeno, Leto izdelave: 1995, MB Bäuerle multipli CAS-524 folding machine, used The MB Bäuerle multipli CAS-524 is a high-performance and versatile folding machine, renowned for its precision and flexibility. It is ideally suited for medium to large production volumes in print shops and bookbinding businesses. Kodpfx Ahew Eu Rzs Dedu Key Features: - 4 folding pockets and 2 folding rollers for a wide range of folding types - Folding roller diameter: 44 mm - Automatic folding pocket adjustment for quick job changes - Touchscreen control for easy operation - Vacuum feed for reliable sheet handling - Integrated perforating unit for additional processing options - Compatible with various paper grades and weights Technical Specifications: - Max. paper size: 520 x 720 mm - Min. paper size: 100 x 120 mm - Paper weight: 40 – 250 g/m² - Folding speed: up to 40,000 sheets/hour - Power supply: 400 V, 50 Hz - Dimensions (L x W x H): approx. 2,100 x 650 x 1,250 mm - Weight: approx. 750 kg Total Care Package We take care of everything: from secure packaging and transport to customs clearance. Upon request, we can also provide you with a tailored leasing offer. Sustainable and economical Opt for a pre-owned machine and benefit in two ways: protect the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Stanje: dober (rabljeno), Leto izdelave: 2001, MB Baeuerle Multipli CAS-524 Flachstapelanleger 4 Taschenfalzwerke Kjdpeh Ighhjfx Ah Djdu Schallschutzhauben Auslauf-Förderband

Stanje: rabljeno, Leto izdelave: 1994, Mathias Baeuerle CAS 524 SE, letnik 1994, je stroj s štirimi žepi in ravnim podajalcem skladov. Ima eno prečno rezalno enoto, ki izboljšuje njeno funkcionalnost. Ta model ima format 520 x 720 mm, trenutno se nahaja v Nemčiji in je na zalogi. Format: 520 x 720 mm Oprema: 4 žepi Kedpfxsv Di Sre Ah Dsdu Ravni podajalec skladov 1 prečni pregib

Stanje: rabljeno, številka stroja/vozila: 78261, Falzmaschine MB multipli-cas 524 Serien-Nr. 78261 Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – kann besichtigt werden Kedpjh Axynefx Ah Djdu Lagerstandort: Emskirchen / Nürnberg – Test vor Ort möglich

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 28.400 km, moč: 103 kW (140,04 KM), vrsta goriva: dizel, največja dovoljena obremenitev: 980 kg, prva registracija: 04/2022, naslednji pregled (TÜV): 04/2026, barva: bela, Leto izdelave: 2022, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, računalnik na krovu, registracija vozila, sistem za imobilizacijo, PEUGEOT BOXER 435 L4 2.2 BlueHDi 140 HP ALUMINIUM DROPSIDE BODY COMPANY VEHICLE – DOMESTIC – ONE OWNER ONLY – MANUAL AIR CONDITIONING WITH FRONT REFRIGERATED GLOVE BOX REINFORCED DOUBLE-LEAF REAR SUSPENSION FM DAB RADIO WITH BLUETOOTH Kdedpfxowmxdbo Ah Dju PAYLOAD: 980 KG VAT EXPOSED: €20,400.00 + 22% VAT = €24,888.00 CUSTOMIZED FINANCING AVAILABLE ALSO WITHOUT DOWN PAYMENT, WITH LOW OR BALLOON INSTALLMENTS, UP TO 96 MONTHS TRADE-INS AND VEHICLE SCRAPPAGE ACCEPTED

Stanje: rabljeno, Ponudba vsebuje: 2x Hohner 52/8 glavici za vezavo s šivanjem in ring očesi primerne za katerokoli napravo za izdelavo brošur / žičeno šivanje (saddle stitcher) Kdedpfjw Ewy Eox Ah Deu Za vas lahko organiziramo tudi: pakiranje, nakladanje, prevoz (po morju ali letalsko), vključno s carinskimi formalnostmi.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.200 kg, lastna masa: 525 kg, Naprava za obračanje palet Težišče tovora: 500 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Stanje: Pripravljeno za uporabo in popolnoma delujoče Tehnično stanje: dobro Kdodpfx Ahsxpy Hms Dsu Opis: Preverjeno v delavnici z UVV pregledom

Stanje: novo, Leto izdelave: 2025, CASADEI PF 520 M Tersa – Jointer/planer for professional use, with 520 mm planing width and motorized adjustment of the infeed table - Oversized jointer tables made of hardened and stress-relieved cast iron - Rigid steel-cast iron design for precision and durability - The robust fence is easily adjustable and offers a generous support surface - Large fence, tiltable from 90° to 45° Kdsdpfx Asb D Sblsh Dju - Fence tilt angle can be read easily from the operator's position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision unit and heavy-duty cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with the simplest operation Scope of delivery: - PF 520 M Tersa - Tilting auxiliary fence - TX-Matic planer cutterhead guard - Reinforced main motor 7.0 kW Technical data: Total length of jointer tables: 2960 mm Planing width: 520 mm Fence dimensions: 1100 x 160 mm Fence tilt range: 90° - 45° Max. depth of cut: 8 mm Cutterhead diameter / number of knives: 120 mm / 4 pcs. Speed: 5000 rpm Motor output 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex-stock Bitburg Available for immediate delivery

Stanje: novo, With a 520 mm planing width, motorized thickness table adjustment, and convenient switching - Robust steel and cast iron construction - Large, ribbed surfacing tables made from cast iron - Smooth running operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Sectional pressure bar at infeed - Precision bearing four-knife cutterhead - Helical-toothed steel infeed roller for especially uniform and gentle wood feed - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90 to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-changeover system with pneumatic lifting and lowering of the surfacing table - Extraction connection remains in the same position for both surface and thickness planing—no need for additional hoses or awkward switching/routing around the machine Scope of delivery: Technical Data: Dimensions and Weights: Length (product): approx. 2300 mm Width/Depth (product): approx. 1100 mm Weight (net): approx. 980 kg _____ Surfacing: Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. depth of cut, surfacing: 6 mm Surfacing fence length: 1200 mm Surfacing fence height: 190 mm Fence tilt range: 90 – 45° _____ Extraction Connection: Extraction port diameter (thicknesser): 120 mm _____ Installation Information: Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Space requirement note: The dimensions account for maximum movement or workpiece length. Machine body length: 1235 mm Machine body width/depth: 850 mm Working area length: 1000 mm Working area width/depth: 3500 mm Working area note: Please add these dimensions to the space requirement to get the recommended clearance for the machine. _____ Thicknessing: Min. working height (thickness): 3.5 mm Max. working height (thickness): 250 mm Max. depth of cut, thicknessing: 8 mm _____ Electrical Data: Motor power: 7 kW Supply voltage: 400 V Line frequency: 50 Hz _____ Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Max. planing width: 520 mm _____ Kdodpfx Aoxnqyhjh Dou Feed: Feed speed: 5/8/12/18 m/min

Stanje: novo, - Robust steel and grey cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high intrinsic weight - Four feed speeds - Motorized thickness table adjustment with two speeds and digital display - Segmented pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical-geared steel infeed roller for particularly even and gentle wood feed - Outfeed roller with rubber coating - Large jointer fence, tiltable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The dust extraction port position remains the same during both jointing and thicknessing operations, eliminating the need for additional hoses or laborious reconfiguration around the machine. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - P.O. Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (Product) approx.: 2300 mm - Width/Depth (Product) approx.: 1100 mm - Weight (Net) approx.: 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. cutting depth (jointer): 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilting range: 90° – 45° Extraction Connection: - Extraction outlet diameter (thicknesser): 120 mm Installation Information: - Required length: 2300 mm - Required width/depth: 1610 mm - Floor space details: Dimensions account for maximum travel or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Working area note: Please add these values to the space requirements to ensure the recommended free installation space for the machine. Thicknesser: - Thickness table width: 520 mm - Min. working height (thickness): 3.5 mm - Max. working height (thickness): 250 mm - Max. cutting depth (thickness): 8 mm Electrical Data: - Main motor power: 7 kW - Supply voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min Ksdpfxeu T Hq Sj Ah Dsdu

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Kjdobxz S Hjpfx Ah Dedu Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available