Mikron Vce 800 nakup rabljenega (192)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Shown spare parts by hand are not included. Pallet changer EROWA is not included. Codpfxem Dtnrs Aa Sjgn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm Csdpfx Aaswy I Tls Ssgn EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ Csdpst I T N Esfx Aa Sogn 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection.

Stanje: dober (rabljeno), Leto izdelave: 1972, Premer kolesa - maks. 80 mm Širina kolesa 60 mm Modul - maks. 3 Modul - min. 0,1 Skupna potrebna moč 0,4 kW Teža stroja pribl. 120 kg Csdpfxew N S D Sj Aa Sjgn Potrebni prostor pribl. 0,6x0,6x0,75 m Stroj je namenjen brušenju majhnih stožčastih oziroma ravno zobatih zobnikov. Za rezkanje stožčastih zobnikov se uporablja Mikron 102.01.

Stanje: dober (rabljeno), Leto izdelave: 1991, Machine weight approx. 6 t The design of the base machine is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece is mounted between the workpiece spindle head (left) and the tailstock (right) Cgodpfxjub Amfj Aa Ssn - The radial slide is mounted on the base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive range of accessories Technical data: - Maximum module for gear hobbing cutters according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece diameter for manual loading: 200 mm - Max. workpiece diameter for automatic loading: 150 mm - Maximum workpiece length: 400 mm - Largest / smallest cutter diameter: 102 / 40 mm - Maximum cutter length: 230 mm - Largest / smallest cutter arbor diameter (standard): 32 / 16 mm - Axial slide travel = maximum milling length Z-axis: 300 mm - Radial slide travel X-axis: 140 mm - Shift slide travel (shift movement) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swiveling angle of shift milling head (left/right) A-axis: 50° / 60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm (*assuming '1ß0' is a typo for 100) - Y-axis (front face of milling spindle): 50 - 230 mm - W-axis (front face of tailstock spindle): 165 - 585 mm - Cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 1,850 mm Cgedpfxsvxwuwe Aa Sen Y-axis travel: 1,400 mm Z-axis travel: 720/905 mm Control system: SIEMENS SL 840 D Spindle speeds: 15,000 rpm B-axis: -20 / +120° Tool holder: HSK-A63 Tool magazine with 45 positions Maximum tool length: 365 mm Tool diameter with adjacent positions occupied: 90 mm Tool diameter with free adjacent positions: 130 mm NC rotary table: 1,600 mm T-slots: 12 Slot width: 18H12 Slot spacing: 100 mm Table load capacity max.: 3,000 kg Table rotation speed max.: 30 rpm Total power requirement: 89 kW Machine weight approx.: 26 t Space requirement approx.: 7.00 x 6.20 x 4.15 m 5-axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, fire extinguishing system, 2x electronic handwheel, Steptec spindle, spindle oil cooler, ICS (internal coolant supply), high-pressure pump, Bürener coolant band filter system, chip conveyor. Machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Cedolu N Hiepfx Aa Sjgn Heidenhain wired handwheel for easy machine setup.

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Cjdpfx Aaecxxq Do Ssgn Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 6766, x-axis travel: 560 mm y-axis travel: 500 mm z-axis travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Codpfx Aascxxpqj Sogn Rapid traverse Z-axis: 5 m/min Feed rates x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirements approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KU 4165M, potovalna razdalja osi X: 572 mm, pomik osi Y: 322 mm, pomik po osi Z: 265 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 22, The value of the supplied spare parts amounts to approx. € 70,000 TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: unlimited Remote Diagnostics: available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: parallel to main time, manual, with 3-axis handling or robot Part Feeding: paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-axis: 1,000 rpm Rotational Speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis clamped: 1,000 Nm Torque B-axis unclamped: 287 Nm Torque C-axis clamped: 300 Nm Torque C-axis unclamped: 187 Nm Main Spindle Tool Holder: HSK 40-A Outer Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal Coolant Supply up to: 120 bar Spindle Distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Cjdpfoxamh Ejx Aa Sjgn Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Operation: pneumatic, 6 bar Tool Changer Tool Discs: externally presettable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with Free Position: 105 mm Shortest Chip-to-Chip Time: ≥ 1 s Max. Weight of Tools on Disc: 15 kg Positioning Time per Tool Step: 250 ms Tool Holder: HSK 40-A, as per DIN 69893 MACHINE DETAILS Machine Dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per Machining Module: approx. 4.5 t Weight per Loading Module: approx. 2.5 t

Stanje: rabljeno, Leto izdelave: 1997, Technical details: X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed range: 5 - 5000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Cedovb Hzrjpfx Aa Ssgn Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer with 44 tools, flat guideways on all axes, guides protected by wipers and steel covers. Comes with a Heidenhain wired handwheel for convenient machine setup.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.84.01.011, potovalna razdalja osi X: 400 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 430 M, skupna višina: 2.830 mm, skupna dolžina: 3.200 mm, skupna širina: 2.600 mm, The Mikron HSM 400 is a high-precision high-speed machining center designed for processing complex workpieces in toolmaking, mold making, and precision engineering. The machine is engineered for high spindle speeds, dynamic axis movements, and excellent surface quality. STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26,897 h Axis drives & dynamics AC servomotors, ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotational speeds & accelerations: B-axis: up to 54,000 °/min C-axis: up to 90,000 °/min Spindle (STEP-TEC) Manufacturer: Step-Tec AG (Switzerland) Tool interface: HSK-E40 Max. speed: 42,000 rpm Power: 13 kW (40% duty cycle) 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle) 3.2 Nm (100% duty cycle) Lubrication: Oil-air (Alternative configurations possible up to 60,000 rpm according to documentation) Tool & pallet system Tool changer: Cgsdex Hii Ijpfx Aa Son HSK-E40: 18 / 36 / 68 tools Tool change time: approx. 10 s Chip-to-chip: approx. 12.5 s Pallets / clamping systems (depending on configuration): Mecatool GPS: 240 × 240 mm Erowa UPC: 320 × 320 mm System 3R Dynafix: 280 × 280 mm Max. workpiece weight: up to 200 kg

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Cgedpjtqqplofx Aa Sjn Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Total power requirement 20 kW Machine weight approx. 5.8 t Cgedpfx Aaotz Sqho Sjn Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: rabljeno, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine no. 440911 Year of manufacture: approx. 1985, Overhauled and control system retrofit in 11/2000 Travel paths X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min.; Z = 4000 mm/min. Cgedsw A Af Ijpfx Aa Sjn Quill stroke 100 mm Main spindle drive 4 and 5 kW Mains connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (readout) - Control cabinet fixed to the machine rear - Coolant system in machine base - Swiveling operator panel - Electrical diagram, operator's manual for the control system available Required space (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel (X-axis): 630 mm Travel (Y-axis): 500 mm Travel (Z-axis): 460 mm Cgedpfj H I Hdjx Aa Sen Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 - 3150 rpm Feed rate, steplessly adjustable: 1 - 3000 mm/min Rapid traverse: X/Y 6 m/min, Z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1800 x 2120/2600 x 2020 mm Weight: 3100 kg Control: HEIDENHAIN, TNC 155

Stanje: dober (rabljeno), Leto izdelave: 2000, Travel paths: 1350 x 900 x 750 mm Machine control: Heidenhain TNC 426 Equipment: 46-position tool changer, SK 40 milling spindle, 12,000 rpm, incl. internal coolant supply (IKZ system) and chip conveyor Glass linear scales, 3D touch probe Renishaw MP12 Cjdoi El Iajpfx Aa Ssgn Extensive accessories available upon request! Please contact us if interested!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Cjdpfjwm I N Hox Aa Segn Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), X-axis travel: 560 mm, Y-axis travel: 500 mm, Z-axis travel: 400 mm. Vertical clamping table dimensions: 300 x 450 mm. Number of threaded holes: 2 x 6. Threaded hole spacing: 45 mm. Thread: M16. Angular table clamping surface: 460 x 800 mm. Number of T-slots: 7. T-slot spacing: 63 mm. T-slot width: 14 mm. Max. workpiece weight (recommended): 350 kg. Milling spindle drive: Number of working spindle speeds: 21. Speed range (geometrically stepped): 40–4000 rpm. Step progression: 1.259. Spindle motor power: 3.3 / 4 kW. Tool holder: ISO 40 / M16 with draw-in slot. Vertical quill stroke: 90 mm. Stepless feed adjustment on all 3 axes: 2–3000 mm/min. Rapid traverse X-axis and Y-axis: 6000 mm/min. Rapid traverse Z-axis: 4000 mm/min. Feed motor torque longitudinal and transverse: 3.5 Nm each. Feed motor torque vertical: 7 Nm. Control: Heidenhain TNC 407. Connected load: 8.7 kW. Length: 3705 mm. Width: 2430 mm. Height: 3100 mm. Machine weight with vertical milling head and angular table: 2410 kg. Crate base weight: 170 kg. Shipping crate weight: 400 kg. Operating hours: 18,924 h. Cedoxcxz Nspfx Aa Ssgn Accessories: 3D probe, 20 tool holders, splash guard enclosure, coolant pump, work light, electronic handwheel, machine documentation. An on-site inspection is possible.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Max. spindle speed: 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Axes Cedpfsw Hq Ifox Aa Ssgn X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control unit: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D touch probe Note: The tool holders shown in the photos are included in the scope of delivery. However, the tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale. The drive for the head tilting axis is missing.

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Cgodpfx Aow Sxyxsa Ssn

Stanje: pripravljen za uporabo (rabljen), Spindle speed: 3,150 rpm, Travel path X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Cgjdstuwk Ujpfx Aa Ssn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Codpfx Aaew Emx Ro Sjgn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, spindle speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Cjdpfx Aow Exr Aja Sogn

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 560 mm / 500 mm / 400 mm, spindle speed: 5,000 rpm, table size X/Y: 900 mm / 530 mm, feed rate: 8 m/min, rapid traverse: 10 m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3,950 mm / 2,650 mm / 2,150 mm, weight: approx. 3,000 kg, control: Heidenhain TNC 407/415, operating hours: 29,647 h. The central lubrication system is showing issues. Documentation available. On-site inspection is possible. Cedpfx Ajw H At Hja Segn