Nosilec palet

MIKRON HSM 400

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.84.01.011, potovalna razdalja osi X: 400 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 430 M, skupna višina: 2.830 mm, skupna dolžina: 3.200 mm, skupna širina: 2.600 mm, The Mikron HSM 400 is a high-precision high-speed machining center designed for processing complex workpieces in toolmaking, mold making, and precision engineering. The machine is engineered for high spindle speeds, dynamic axis movements, and excellent surface quality. Hsdpfx Agsx Hii Ij Tsi STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26,897 h Axis drives & dynamics AC servomotors, ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotational speeds & accelerations: B-axis: up to 54,000 °/min C-axis: up to 90,000 °/min Spindle (STEP-TEC) Manufacturer: Step-Tec AG (Switzerland) Tool interface: HSK-E40 Max. speed: 42,000 rpm Power: 13 kW (40% duty cycle) 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle) 3.2 Nm (100% duty cycle) Lubrication: Oil-air (Alternative configurations possible up to 60,000 rpm according to documentation) Tool & pallet system Tool changer: HSK-E40: 18 / 36 / 68 tools Tool change time: approx. 10 s Chip-to-chip: approx. 12.5 s Pallets / clamping systems (depending on configuration): Mecatool GPS: 240 × 240 mm Erowa UPC: 320 × 320 mm System 3R Dynafix: 280 × 280 mm Max. workpiece weight: up to 200 kg

Stanje: novo, Model designation Hjdpogvqzcofx Ag Tei Airtower FT 20,000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, X-travel 400 mm Hodpfx Ajxfb E Aeg Toi Y-travel 450 mm Z-travel 350 mm Control Heidenhain iTNC 530 Tool changer for 68 tools HSK 40E spindle taper Spindle speed 30,000 rpm Fixed table - Table size 300 x 400 mm Workpiece weight capacity 200 kg Pallet table size 320 x 320 mm Rapid traverse (X/Y/Z) 40 m/min Spindle drive motor 13 kW Operating hours 32,369 h Total power requirement 16 kW Machine weight approx. 7,500 kg High-speed universal 3-axis machining center with 7-fold pallet changer. Operating hours: 44,899 h, Load hours: 32,369 h, Spindle time since replacement: 13,350 h. Accessories: 1 BURN chiller, 1 Keller L-Cut exhaust unit (year 2012), setup probe PS 32, and tool air-blow device. Machine is built in portal design; robust monoblock polymer concrete construction; compact linear ball guides; direct measurement system by Heidenhain; hydraulic unit for tool and pallet clamping; digital drives with liquid-cooled Siemens AC servomotors. This is a used machine and is therefore sold without any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: dober (rabljeno), Leto izdelave: 2006, 1. TEHNIČNI PODATKI Delovno območje X-os: 400 mm Y-os: 450 mm Z-os: 350 mm B-os: ±110 ° C-os: 360 ° Delovno vreteno Območje hitrosti: 100 - 42.000 min⁻¹ Nosilec orodja: HSK E 40 Moč vretena pri 40 % ED: 13 kW Moč vretena pri 100 % ED: 10 kW Navor pri 60 % ED: 4,25 Nm Navor pri 100 % ED: 3,2 Nm Mazanje: olje/zrak Pomik Hitri pomik: maks. 40 m/min B-os: 150 min⁻¹ C-os: 250 min⁻¹ Pospešek osi XYZ: maks. 1g (10 m/s²) B-os: 100 rad/s² C-os: 300 rad/s² Menjalec orodja: 68 mest Chip to chip: 12,5 s Čas menjave orodja: 10,0 s Delovna miza: 120 mm Maks. premer obdelovanca za 360° vrtenje: 230 mm Maks. višina obdelovanca: 350 mm Maks. teža obdelovanca: 25 kg Hjdpfsx H Ntaex Ag Tji Krmilnik: Heidenhain iTNC 530 Teža: 5500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik – 4. os vreteno 20.000 vrt./min, HSK 63 miza 850 x 530 mm hodi 600 x 450 x 450 mm menjalec 30 orodij Hodpfxow Dc Iro Ag Tji teža 6500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, model krmilnika: iTNC Heidenhain 530, največja hitrost vretena: 42.000 obr/min, kot vrtenja osi C (maks.): 360 °, število osi: 5, No reserve price – guaranteed sale to the highest bidder! The offer includes: 2x 5-axis HSC machining centres + pallet system with robot MIKRON HSM 600 U (Serial number: 217.88.00.070) TECHNICAL DATA Travel distances Travel X: 800 mm Travel Y: 600 mm Travel Z: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / −110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): max. 217 Nm Clamping torque: 1,400 Nm B-axis Swivel range: +30° / −110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load: max. 120 kg Tool magazine: 68 stations Control: iTNC Heidenhain 530 Workpiece weight: max. 120 kg EQUIPMENT Swivel rotary table with Erowa UCP MIKRON HSM 400 U (Serial number: 217.87.00.178) TECHNICAL DATA Travel distances Travel X: 400 mm Travel Y: 240 mm Travel Z: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ± 110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): max. 217 Nm Clamping torque: 500 Nm Hedpfxox Hx T Aj Ag Tji B-axis Swivel range: ± 110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): max. 686 Nm Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load: max. 25 kg Tool magazine: 36 stations Control: iTNC Heidenhain 530 EQUIPMENT Swivel rotary table EROWA ROBOT MULTI TWIN Gripper change station: 6 positions Grippers: various Storage system Rotary storage: 5 levels Storage allocation: Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measurement systems on all axes Infrared measuring probe LASER Set-up operation with electronic handwheel Graphite extraction: 2x BURN WK 5806 Rotary pallet storage

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), MIKRON HSM 400 U High-Speed Machining Center The exact scope of supply can be seen in the photo gallery. Included, among others: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Work Area Hedeigrf Iepfx Ag Tsi X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool holder: HSK E 40 Spindle power at 40% duty cycle: 13 kW Spindle power at 100% duty cycle: 10 kW Torque at 60% duty cycle: 4.25 Nm Torque at 100% duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter (for full 360° rotation): 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2011, LANDIS LT-2 DVOJNI CNC STROJ ZA BRUŠENJE ROČIČNIH GRED (ORBITALNI) Opremljen z: - Landis 6400 CNC krmilnik - Siemens TOUCH HMI - Arobetech podpora (steady rest) - Marposs P7 merilni sistem - Bočni lokator - Dva CBN brusna koluta - Rotacijski dreser - Glavni vretenjak (headstock) - Konjiček (tailstock) - Klimatske enote Rittal Specifikacije: Hsdortrxxjpfx Ag Tei Maksimalna razdalja med konicami: 680 mm

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). Hodpjf Sqckofx Ag Tei This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 5.190 h, Funkcionalnost: popolnoma funkcionalen,