Solidworks nakup rabljenega (10)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 294 mm, pomik osi Y: 192 mm, pomik po osi Z: 149 mm, število osi: 3, This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², enabling versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality, smooth surfaces and supports over 640,000 colour combinations. If you are looking for high-end 3D printing performance, consider the Stratasys J55 Prime machine we are offering for sale. Contact us for further details. • Technology: PolyJet (multi-material 3D printing) • Build volume: Up to 22,000 cm² (rotating build tray) • Maximum part size: Up to 1,174 cm² • Layer thickness: 18 microns (0.0007 in) Lsdpfsyub Hyjx Adksri • Material capacity: 5 main material channels (ProJet technology) • Supported materials: VeroFamily (opaque colours); VeroClear / VeroUltraClear (transparent); Elastico (flexible); Digital ABS • Colour capability: Over 640,000 combinations (PANTONE verified) • Accuracy: Typical deviation ±0.15 mm (±0.006 in) for rigid materials • Software: GrabCAD Print (compatible with SOLIDWORKS, CATIA, AutoCAD, etc.) Additional equipment • ProAero Air Extractor System (silent and odour-free operation)

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), This 6-axis MACRI Provar 6-45 U-D was manufactured in 2018. It is a fully-automatic CNC tube bending machine, distinguished by its minimal usage with only approximately 20 operating hours. The machine supports a maximum tube diameter of Ø45 × 4 mm and a usable tube length of 5,800 mm. Key performance features include a maximum bending speed of 150°/sec and a maximum feeding speed of 1,000 mm/sec. Consider the opportunity to purchase this MACRI Provar 6-45 U-D profile bending machine. Contact us for further information. Additional equipment • Mobile carriage support / anti-wrinkle mandrel support / safety mat 2×1 m (aluminium) / Macri software installed on office PC (Windows 7) / rear open-end bending system / hydraulic cylinder for square/rectangular tube opening / automatic system for material elasticity control / tool sets Machine advantages Technical machine advantages • Production hours: approx. 20 hours, the machine was not used in production. • Type: fully automatic CNC tube bending machine (6-axis) Lredpfx Asyap Upsdksi • Max. tube diameter (round): Ø45 × 4 mm / Min. tube diameter for variable radii: Ø35 × 2 mm (rm 10d) / usable tube length: 5,800 mm / max. bending speed: 150°/sec (±0.1°) / max. feed speed: 1,000 mm/sec (±0.1 mm) / max. clamp rotation speed: 450°/sec (±0.1°) / bending direction: right-hand / spindle movement (head movement): 6 axes (y, x, z, b1, b2, a) • Installed power: 15 kW / voltage / frequency: 400 V / 50 Hz / machine dimensions (L×W×H): 6,000 × 1,200 × 1,200 mm / weight: 4,500 kg / control cabinet dimensions: 900 × 600 × 1,800 mm • Control: industrial PC with Windows 7 / Display: 19" LCD TFT SVGA touch screen / control software: graphical Cartesian & CAD-based interface / functions: manual and semi-automatic operation, import of 3D files (e.g. SolidWorks)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 250 h, In our possession since 2021 for customer prints, product demonstrations, and trade show appearances. Fully operational, supplied by IGO3D, a Desktop Metal partner. The machine can be viewed in Hannover (remote video calls possible upon request). Office-friendly 3D metal printing in just 2 steps: Lredpfx Adjm Rgzaokei Print. Sinter. The Desktop Metal Studio System 2 printer is designed from the ground up for easy installation and use. Its process is similar to the safest and most widespread 3D printing method, Fused Filament Fabrication (FFF). Unlike laser-based systems that selectively melt metal powder, the Studio System 2 extrudes bound metal rods, eliminating the complex requirements associated with metal 3D printing and enabling new features like gyroid infill for lightweight strength. Technology - Printing technology: Bound Metal Deposition - Supported technology: Separable supports - Interface technology: Ceramic release layer Performance - Layer height (green state): 50–150 µm (high-resolution printhead) / 150–300 µm (standard-resolution printhead) - Max build weight (green state): 6.5 kg Dimensions - External dimensions: 948 x 823 x 529 mm - Weight: 97 kg - Build chamber: Heated - Extruder assembly: Dual quick-swap printheads - Build area: 300 x 200 x 200 mm - Build plate: Heated up to 70°C / vacuum-enabled bed - Build sheets: Polypropylene, removable - Nozzle diameter (build material): 0.40 mm (standard resolution) / 0.25 mm (high resolution) - Power requirements: 100–130 VAC, 50/60 Hz, 15 A, single phase / 200–240 VAC, 50/60 Hz, 10 A, single phase - Onboard control: 7-inch touchscreen display - Chamber view: In-chamber build plate camera Media - Media hold/reload: Hot-swappable, push-to-release, user-refillable cartridges - Build media: Bound metal rods (metal powder + polymer binder) - Interface media: Bound ceramic rods Platform - Network connectivity: Wireless and Ethernet - Software: Fabricate Cloud (optional local licenses available) - Supported file types: STL, IGES, JT, STEP, VDA-FS, U3D, VRML, and native files (SolidWorks, ProE, etc.)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Lasersko rezanje 569 delovnih ur Zadnji tehnični pregled: 10.02.2023 6000-W vlaknasti laserski vir z hladilnim modulom Največja dolžina: 3048 mm Največja širina: 1524 mm Z-os: 100 mm Največja teža pločevine: 750 kg Maksimalna debelina reza: Mehko jeklo: 25 mm Nerjaveče jeklo: 20 mm Aluminij: 20 mm Ljdpfomzbkrjx Adksri Baker: 8 mm Vključuje programsko opremo: PARTS.L – vodenje proizvodnje ADDIN.SOLIDWORKS – integracija med Solidworks in Streamlaser STREAMLASER – CAM in razporejanje izsekov (nesting) VALUES.L – ocena proizvodnih stroškov Računalnik z Intel Xeon W-2123, Nvidia Quadro P2000, 16 GB RAM Stroj je kot nov, popolnoma delujoč.

Stanje: novo, Leto izdelave: 2026, A CNC plasma cutting machine with a water table is designed for precision shape-cutting of components from sheet metal (in any desired shape). This machine stands out for its exceptional simplicity and ease of use. Our CNC cutter ensures repeatability and high cutting accuracy (0.1 mm), allowing cut parts to be transferred directly to the next stage of production. The water table minimizes the consumption of consumables and raw materials and ensures low emission of gases. No fume extraction or exhaust ventilation is required. Why choose our solution? water table no need for fume or exhaust extraction compact footprint allows installation virtually anywhere THC voltage height controller precise torch positioning highly accurate cutting requiring no further processing sheet metal detection system convenient operator control panel intuitive machine operation cutting and grooving in steel operator training at buyer’s or seller’s location library of standard geometric shapes Features and equipment: Working area: 1500 x 3000 mm Y-axis clearance: 140 mm Rigid and stable frame construction Water table Ledpfeg Nknysx Adkori Voltage height controller Torch height adjustment system Torch height sensing and stabilization FastCAM software – in Polish, with license included USB port plus internal and external storage User-friendly interface – easy to use, even for those without prior FastCAM experience Import of drawings in *.txt format from any CAD software (e.g. AutoCAD, SolidWorks, etc.) MACRO – library of standard geometric shapes, enabling figure creation without manual drawing NESTING – automatic component layout on sheets DEMO – displays the work cycle (path) without the need to start the plasma or oxygen source The listed price is NET (excluding VAT). The price does not include transport costs. For more information, feel free to contact us by phone or email. Please also visit our website to view our full offer.

Stanje: novo, Leto izdelave: 2026, The CNC plasma and oxy-fuel cutting machine is a mobile device designed for precision profile cutting of sheet metal (in any desired shape). This machine stands out for its simplicity and ease of use. Our CNC cutter ensures repeatability and high cutting accuracy (0.1 mm), allowing the cut parts to be transferred directly to the next stage of production. Why choose this machine? - Dual-purpose cutting: plasma or oxy-fuel in one unit - Compact size enables setup in virtually any location - Voltage-based torch height control (THC) - Precise torch alignment - Ultra-precise cutting requires no further processing - Automatic sheet detection system - Convenient operator’s control panel - Intuitive machine operation - Able to cut and groove in steel - Training provided at the buyer’s or seller’s premises - Standard library of geometric shapes Specification and equipment: - Working area: 1500 x 3000 mm - Y-axis range: 140 mm (clearance) - Cutting accuracy: +/- 0.1 mm/m - Weight: 450 kg - Rigid, stable construction - Gas mixer - Oxy-fuel torch - Voltage torch height regulator - Torch height adjustment system - Torch height and stabilization sensor - FastCAM software in Polish, with license - USB port; internal and external memory support - User-friendly interface – easy to operate, even for those without previous FastCAM experience - Import of drawings in *.txt format from any CAD software (e.g., AutoCAD, SolidWorks, etc.) - MACRO – built-in standard geometric shapes library, allowing figure creation without manual drawing - NESTING – automatic part layout optimization on the sheet - DEMO mode – visualizes the work cycle (cutting path) without activating the plasma or oxy-fuel sources Lodpji Apn Usfx Adkori The plotter is sold without a table. The listed price is NET. Delivery costs are not included. For further details, feel free to contact us by phone or email. Visit our website to see our full offer.

Stanje: novo, Leto izdelave: 2026, Plasma-Oxyfuel Cutting Machine ZZ 1500x3000 – Specification The ZZ 1500x3000 CNC plasma or oxyfuel cutting machine is a mobile device designed for contour cutting of components from sheet metal. The machine does not require anchoring to the floor, significantly reducing installation time. Additionally, it can be installed anywhere in the workshop without the need for expensive foundations. The machine is equipped with a high-quality drive system, which, combined with the lightweight gantry, makes this plotter one of the fastest machines available on the market. The machine can be used both for manual and automated cutting. It features a digital controller that allows cutting of complex shapes. This CNC plasma plotter model performs exceptionally well in shipbuilding, machinery, and power industries. Precision rail systems are used on the X and Y axes. Operation of the cutting machine is controlled by a Sino-USA electronic control system known for its high accuracy and for eliminating operational errors. The machine is very easy to program: manual programming is possible for simple shapes; automatic programming is available for more complex figures. The display shows the cutting pattern as well as the torch movement in real time. For easy programming, the machine comes with original FastCAM software. The software is in Polish, making the work process even easier. FastCAM is a CAD/CAM technological program used for designing and defining cutting paths for components processed on CNC cutters. The software is installed in the office on a desktop or laptop. Once the cutting method is defined, the ready control code is generated and transferred to the machine’s control unit. FastCAM is a standard part of our machine equipment. Plasma-Oxyfuel Cutting Machine ZZ 1500x3000 – Key Information: - User-friendly interface – simple operation even for those who have never used FastCAM-type programs - Import of *.txt drawing files from any software (e.g., AutoCAD, SolidWorks, etc.) - MACRO – a library of standard shapes allows for creating shapes without drawing them in a CAD system. The program provides 2D figures - NESTING – optimal sheet utilization thanks to automatic part arrangement on the plate - DEMO – Shows the complete cutting cycle (path) without turning on the plasma or oxygen gas source TORCH HEIGHT CONTROLLER: The machine is equipped with THC (torch height control) for plasma cutting. Precise adjustment (+/- 0.1mm) of torch-to-sheet distance during cutting. High accuracy and free of the drawbacks of capacitive sensors and roller guide wheels. Parameters are automatically retrieved from the Automatic Cutting Parameters Selection Table. Technical parameters of ZZ 1500x3000 plasma-oxyfuel cutting machine: POWER SUPPLY 230 V LCD 7" color CODE FORMAT G-Code Z-AXIS STROKE 120 mm WORKING AREA 1500 mm x 3000 mm CUTTING SPEED Lrodpsvxhwvefx Adksi 50-3000 mm/min Images are for illustrative purposes only; device is sold without table.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, MiniBendCenter RAS 79.05 Fully Automatic Panel Bending Center for Small Parts - General Information: Directly from the manufacturer Manufacturer’s warranty Maintenance included Latest available software version - General technical data in mm: Blank length: 50–600 Blank width: 40–600 Max. sheet thickness (400 N/mm²), tool-dependent: 3.0 Max. upper beam stroke: 500 mm Min. flange height (reference value, tool-dependent): 5 x s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrical: approx. 2027 kg Weight of machine components: approx. 945 kg - Machine-related data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine configuration: Bending Cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis plus separate drive for rotary axis - Double-sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic rotary drive for rotary axis - Tool gripper - 2-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell front and rear Mobile operator panel: - 18" Touch & More control system Intelligent loading robot Combined camera and scanner system Analysis software Lrodpfxjx Hyhus Adkei Transfer table, Sauerfeld (52x9 mm) suction cup row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining quantity) Curved conveyor belt with 6 interfacing stations Finished parts discharge enclosure Complete tool set RAS CAM-Office software including SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 1 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, model krmilnika: DELTA, Premer cevi (maks.): 65 mm, Dolžina cevi (maks.): 4.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 300 mm, minimalni polmer upogibanja: 90 mm, dolžina vpenjala: 4.000 mm, število osi: 3, skupna dolžina: 5.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina’s most powerful solution: the 3-axis CNC mandrel tube bending machine, capable of bending pipes up to Ø65 mm, designed for high-precision pipe and profile forming tasks in the Shipyard and Shipbuilding, Thermal Power Plant, Park and Garden Furniture, Fitness Equipment, and Exhaust Industries. Hydraulic rotation makes even the most challenging applications effortless. Key Features: Lsdpfxjyhdzao Adksri  Import drawings directly to the machine via SolidWorks interface  Seamless operation in both fully automatic and manual modes with interactive PLC control  Multi-language support  3D visualization of the programmed part  3D pipe collision detection simulation within your program  Automatic pipe length calculation  CE compliant  On-screen error diagnostics  Integrated safety warning system  User-friendly operation with the Livmak Interface Technical Specifications TROX 3 Axis 65 CNC Max. Bending Capacity: Ø65 mm x 2 mm Min./Max. Die Diameter: 90 / 250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500 x 1750 x 1750 mm Total Motor Power: 15 HP Machine Weight: 3 Tons

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 1 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, model krmilnika: DELTA, Premer cevi (maks.): 38 mm, Dolžina cevi (maks.): 4.000 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 60 mm, dolžina vpenjala: 4.000 mm, število osi: 5, delovna višina: 1.500 mm, skupna masa: 2.700 kg, skupna dolžina: 5.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, 5 Eksen 38 CNC Malafalı Boru Bükme Makinası PUMA Otomotiv, Beyaz Eşya ve Savunma Sanayi sektörlerinde, Liv Makina’nın 5 eksenli, 38 mm CNC malafalı boru bükme makinesi, 4 kıtaya yayılmış referanslara sahip en çok tercih edilen makinelerindendir. Solidworks uyumlu kullanıcı arayüzü sayesinde operatörlerin kullanımı son derece kolaydır. Endüstri 4.0’a tam uyumlu olan makine, günlük performans raporlarını otomatik olarak iletmektedir. Büküm işlemlerinde kullanılan özel rolling kalıp ile boruları yay gibi sarabilme kabiliyetine sahiptir. Bir makinede 3 farklı radyusta kalıp bağlayabilme özelliği ile en zorlu bükümlerde dahi maksimum esneklik sunar. Entegre çarpışma simülasyonu (collision program) sayesinde operatör, büküm öncesinde ürünü ekranda canlı olarak görüntüleyip zaman ve malzeme tasarrufu sağlayabilir. Bu gelişmiş yazılım, tüm CNC boru ve profil bükme makinelerimizde ücretsiz olarak sunulmaktadır. Başlıca Özellikler:  Solidworks programı ile makineye çizim aktarımı Ledpoyhdx Sjfx Adksri  İnteraktif PLC kontrol sistemiyle tam otomatik ve manuel çalışma modu  Çoklu dil seçeneği  3 boyutlu program ve ürün görüntüleme  3 boyutlu boru çarpışma simülasyonu  Otomatik boru boyu hesaplama  CE normlarına tam uygunluk  Operatör panelinde hata gösterimi  Emniyet ikaz sistemi  Livmak arayüzü ile kolay kullanım Teknik Özellikler – PUMA 5 Eksen 38 CNC: Maksimum Büküm Kapasitesi: Ø38 mm x 2 mm Minimum/Maksimum Kalıp Çapı: 60 / 250 mm Malzeme İşleme Boyu: 4000 mm Makine Ebatları (UxGxY): 5500 x 1600 x 1600 mm Toplam Motor Gücü: 15 Hp Ağırlık: 2,5 ton