Mikron Vce 750 nakup rabljenega (187)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Travel X/Y/Z 600/600/460 mm, 21 spindle speeds from 31.5 to 3150 rpm, motor 4.0 kW, spindle ISO 40, Heidenhain TNC 155 control, table size 900x550 mm, hydraulic tool clamping, rapid traverse, tilting rotary table with indexing, horizontal milling device, machine lamp, coolant system, splash guard, leveling feet, operating manual, excellent condition Knodpfxopcf D Is Ah Dec

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Knedetqqplspfx Ah Dsc Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Kjdolu N Hispfx Ah Donc Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: rabljeno, Heidenhain Aktiv – digital display Infinitely variable feed Lamp Coolant system Travel paths X / Y / Z: 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Ksdpfecmzzgjx Ah Denc Feed in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertical / horizontal quill extendable Dimensions approx.: 1.2 x 1.2 x 1.6 m

Stanje: dober (rabljeno), Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional. Can be inspected and tested under power on site. Shipping abroad possible. Kodeum Rpyspfx Ah Djnc Inspection: As a general note, to avoid misunderstandings, the item can be viewed and tested under power in advance of purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below or above. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipping with forwarding agent.

Stanje: dober (rabljeno), Leto izdelave: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Knedjrywgzopfx Ah Dec Equipped with Heidenhain Aktiv digital display TNC 114 Infinitely variable feed Lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertical/horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Kjdpsqagugsfx Ah Djnc

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Ksdpfxetz Sqhs Ah Donc Total power requirement 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released. Kedpfx Aecxxq Djh Donc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 140 mm, dolžina pomika po osi Y: 100 mm, dolžina podajanja os Z: 300 mm, največja hitrost vretena: 1.500 obr/min, model krmilnika: IBH CNC, TECHNICAL DETAILS Axial Slide Travel Z-Axis: 300 mm Radial Slide Travel X-Axis: 140 mm Milling Slide Travel Y-Axis: 100 mm Tailstock Travel W-Axis: 420 mm Workpiece Data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. Workpiece length: 400 mm Milling Parameters Milling cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 – 32 mm Milling Coordinates Z-Axis: 100 – 400 mm X-Axis: 100 – 150 mm Y-Axis (face of milling spindle): 50 – 230 mm W-Axis (face of tailstock): 165 – 585 mm Speeds Cutter speed B-Axis: 0 – 1,500 rpm Workpiece speed C-Axis: 0 – 350 rpm Feed Rates X-Axis: 3,500 mm/min Z-Axis: 3,500 mm/min Y-Axis: 4,000 mm/min W-Axis: 5,500 mm/min Kedpfx Ahowcrnxo Dsnc V-Axis (gantry loader): 80,000 mm/min Swivel Range Milling head A-Axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control: IBH - Loading device - Various accessories

Stanje: dober (rabljeno), Mikron C-Axis Machine Table - Equipped with Heidenhain 430 control - Siemens servo motor - Table size: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition, fully functional, can be inspected and tested on site. International shipping available. Knsdsic Rviopfx Ah Dec Inspection: As a basic principle, I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to buying in order to avoid ambiguities. For general inquiries or to arrange an appointment for inspection, I am available at any time via the phone number listed below or above. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight forwarding company.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 used tool milling machine Manufacturer: Mikron Model: WF 2/3 DP Equipped with Heidenhain Type 135 path control Travels (X/Y/Z): 400/410/400 mm Clamping table surface: 800 x 450 mm Spindle speed range: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Tool holder: ISO 40 Kjdpfov N Dzfox Ah Denc Machine weight approx.: 1.4 t Required space approx.: 2.1 x 1.6 x 2.2 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Space requirements approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of manufacture: 2001) Ksdpfx Ahswmzgfe Denc The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, specifically designed for the high-precision machining of complex workpieces. With its robust construction, powerful spindle, and reliable Heidenhain control system, it meets the highest standards for both single-part and series production. All information without guarantee. Detailed technical specifications available upon purchase. Control: TNC 426/430 Travel distances X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot pitch: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool interface: HSK-A63 Tool changer Number of tool stations: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent stations free: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and rapid traverse Feed speed: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Knodpfxswm I N He Ah Dsc Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 6766, x-axis travel: 560 mm y-axis travel: 500 mm z-axis travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Kedpfx Ahscxxpqo Djnc Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rates x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirements approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 152.07.80.8XX,

Stanje: dober (rabljeno), Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 control system Technical data Manufacturer: Mikron Model: WF 32 CH Ksdpowit Rhofx Ah Dsnc Control: Heidenhain TNC355 Traverse paths: X 560 mm / Y 500 mm / Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min; Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more new and used machines in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 500 mm Kedpfjtv Ia Tsx Ah Dsnc Y-axis travel: 500 mm Z-axis travel: 350 mm Table size: 800 x 450 mm Spindle taper: ISO 40 Quill stroke: -- mm Feeds – longitudinal & cross: -- mm/min Feeds – vertical: -- mm/min Max. spindle speed: 3,150 rpm Supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Stanje: rabljeno, Leto izdelave: 2000, X-travel 1000 mm y-travel 1040 mm Knjdpjtig D Iefx Ah Dec z-travel 750 mm Control: Heidenhain TNC 426 Spindle speed: 15,000 rpm Total power requirement: 40 kW Machine weight approx. 10.1 t Required space approx. / m Including handwheel and documentation

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.37.00.616, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, premer vrtljive mize: 450 mm, vrtljajska hitrost (min.): 140 obr/min, skupna masa: 7.700 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 20.000 obr/min, delovne ure vretena: 3.000 h, dovod hladilne tekočine: 70 letvica, moč vretenovega motorja: 3.700 W, nos vretena: HSK63, število vreten: 1, število mest v zalogovniku orodij: 120, dolžina orodja: 270 mm, premer orodja: 80 mm, teža orodja: 6 g, vrsta vhodnega toka: trifazni, Oprema: transportni trak za ostružke, Stroj v izjemnem stanju, ves čas vzdrževan s strani GF, odkar je v naši lasti. - Stroj je bil kupljen iz Renault F1, ko je bil star 3 leta, od GF UK po opravljenem generalnem servisu in pregledih ter z 12-mesečno garancijo. Od takrat ga redno servisiramo izključno pri GF. Pred manj kot enim letom vgrajena povsem nova glavna vretena. Stroj ima zgolj 2800 delovnih ur. Pred tremi leti smo vgradili tudi novo rotacijsko mizo, strošek investicije je znašal 50.000 funtov. Krmilnik: HEIDENHAIN iTNC 530 z Ethernet povezavo X-os (600 mm) Y-os (450 mm) Z-os (450 mm) Maks. dimenzija obdelovanca: (450 mm) premer x (450 mm) višina x (150 kg) B-os (nagib): -120 / +45 stopinj C-os (rotacija): 360 stopinj POGONI Pogon: Kroglasti vreteni na oseh X, Y, Z Pogon: Direktni navorni motorji na oseh B in C Hitri pomik X/Y/Z: 22 m/min Hitrost mize v B-osi (nagib): 50 vrt/min Kjdpfx Aew S Nf Eoh Djnc Hitrost mize v C-osi (rotacija): 140 vrt/min Maks. pospešek X/Y/Z do 5 m/s² DIREKTNI NAVORNI MOTOR RTT (ROTACIJSKA NAGIBNA MIZA) DYNAFIX Sistem 3R Dynafix s 7 paletnimi postajami Maks. dimenzija palete (350 x 350 mm) Maks. teža obdelovanca (150 kg) Hidravlično vpenjanje na rotacijskih in nagibnih oseh Vsi pogonski motorji so tekočinsko hlajeni REVOLVER ZA ORODJE S 120 MESTI Število orodij v magazinu: 120 Stožec vretena: HSK-A63 Maks. premer orodja: 80 mm Maks. premer orodja, če so sosednja mesta prazna: 125 mm Maks. dolžina orodja: 270 mm Maks. teža orodja: 6 kg Število mest za orodja dolžine do 270 mm: 70 Število mest za orodja dolžine do 160 mm: 50 TEŽA Vključno s paletnim menjalcem: cca 7.700 kg Osnova stroja: polimerni beton (umetni granit) VRETENO STEP-TEC ŠVICARSKE IZDELAVE Stožec vretena: HSK-A63 Obrati vretena: 100–20.000 vrt/min Moč vretena: 40 KM (38 kW) Navor vretena (40% ED): 67 Ft/Lb (91 Nm) Maks. premer orodja: 80 mm Maks. dolžina orodja od čela vretena: 350 mm Maks. teža orodja: 6 kg OPREMLJENOST: (600 l) rezervoar za hladilno tekočino s trakom in mikro papirno filtracijo Nastavljiv visoko-tlačni sistem hladilne tekočine skozi vreteno 18–80 bar (261–1.160 PSI) Pretok: 20 l/min (5,3 gal/min) – KNOLL KF400|FKA/600 l Dvižni strgalo-trak za odvajanje aluminijevih odrezkov M&H infrardeča merilna tipala BLUM laserski sistem za merjenje orodij Enota za pihanje orodij Enota za pihanje pri laserski meritvi Nagibna delovna ravnina: Aktivira opcijski HEIDENHAIN programski cikel 19 Opcija “APS” (Advance Process System) Opcija “ITC” (Intelligent Thermal Control) Opcija “ITC-5X” (Intelligent Thermal Control za 5 osi) Zunanje hlajenje vretena

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.072, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 20 m/min, teža obdelovanca (maks.): 500 kg, širina mize: 600 mm, dolžina mize: 600 mm, obremenitev mize: 500 kg, skupna masa: 9.900 kg, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Mikron UCP 800 Duro – 5-Axis CNC Machining Centre Knedpfx Ahjwww Rhe Doc We offer for sale a precision 5-axis CNC machining centre Mikron UCP 800 Duro, manufactured by the renowned Swiss brand GF Machining Solutions. This machine is ideal for machining complex components, moulds, dies, and parts that require the highest accuracy and surface quality.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 29.655 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 73.110, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 700 mm, širina mize: 1.100 mm, obremenitev mize: 1.600 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 92, Kot zasuka osi A (min.): −120 °, zasukni kot osi A (maks.): 16 °, Insolvency auction – all machines fully functional and ready for demonstration. Property of a German GmbH. TECHNICAL SPECIFICATIONS X-axis (Longitudinal): 1,350 mm Y-axis (Transverse): 1,150 mm Z-axis (Vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and Traverse Speeds X and Y axes: 15 / 30 m/min Z-axis: 15 / 30 m/min A-axis: 11 / 20 rpm C-axis: 40 rpm Knodpfjvxr I Eox Ah Doc Work Table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine weight: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise emission level: 68 dB(A) Operating hours: 34,205 h Spindle hours: 29,655 h EQUIPMENT - Without magnetic table

Stanje: rabljeno, Safety switch, safety gate switch, limit switch, push button, circuit breaker, position switch, magnetic interlock switch, safety interlock - Manufacturer: Schmersal, safety interlock removed from a CNC milling machine Mikron UME 600 - Type: AZM 161SK-33rka-024 IEC 60947-5-1 en: see photo of nameplate - Transport dimensions: 270/260/H60 mm Knedpercnm Nsfx Ah Dsc - Weight: 1.5 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 21.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 84.34, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 700 mm, širina mize: 1.000 mm, obremenitev mize: 1.100 kg, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, Kot zasuka osi A (min.): −120 °, zasukni kot osi A (maks.): 16 °, Insolvency auction – all machines in working order and available for demonstration. Property of a German GmbH. TECHNICAL DETAILS X axis (longitudinal): 1,000 mm Y axis (transverse): 1,150 mm Z axis (vertical): 700 mm A axis: +16° / -120° C axis: n x 360° Simultaneously controlled axes: 5 axes Control unit: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and Traverse Speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Knedovxr Iljpfx Ah Dsc Work Table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine weight: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Sound pressure level: 68 dB(A) Program run time: 40,095 h Spindle hours: 21,967 h EQUIPMENT - Without magnetic table

Stanje: rabljeno, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board, circuit board Knjdporc Ilgsfx Ah Dsc - Manufacturer: Mikron, electronic module printed circuit board from CNC milling machine Mikron UME 600 - Type: 958 78 11 200 - Dimensions: 145/110/H55 mm - Weight: 0.4 kg