Mikron Ucp 1000 nakup rabljenega (182)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. Lodpet Hw D Rsfx Ah Djah The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Heidenhain iTNC 530, Delovno območje X 600 x Y 450 x Z 450 mm Vpenjalno mesto vretena CAT40, Avtomatska menjava orodij s 24 pozicijami, Vreteno s 20.000 obr./min Lasdpfsw Hxzmjx Ah Dsh Teža stroja 6.100 kg, Priključna moč 16 kW Pred-varovalka 32 A Obratovalna napetost 400 V, 50/60 Hz

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Ledpfxowx Rafs Ah Deah Z 500 mm 10.000 vrt/min

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Pomik osi X: 1200 mm Pomik osi Y: 600 mm Pomik osi Z: 675 mm Hitrost vrtenja delovnega vretena: 30 - 8000 min⁻¹ Nosilec orodja: ISO B 40 Pomik X/Y/Z: 3000 mm/min Lsdpfxew Iqf Sj Ah Dsah Hitri pomik X,Y / Z: 24 / 20 m/min PODROBNOSTI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmilna napetost: 24 V DC Priključena moč: 16 kW Teža: 8000 kg

Stanje: pripravljen za uporabo (rabljen), Control: HEIDENHAIN TNC 150. Lajdogtiaaopfx Ah Djh

Leto izdelave: 1990, Stanje: rabljeno, X-travel 450 mm y-travel 400 mm Laodpfx Ahspxrknj Deh z-travel 400 mm SK40 head Heidenhain 355 control Coolant system Total power requirement 4 kW Machine weight approx. 2.4 t Space requirement approx. ... m

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Lsdpfx Ahou U Sabe Deah Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, potovalna razdalja osi X: 750 mm, pomik osi Y: 400 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 1 m/min, hitri pomik os Y: 1 m/min, hitri pomik na osi Z: 1 m/min, skupna višina: 2.690 mm, skupna dolžina: 2.230 mm, skupna širina: 2.360 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 7.500 obr/min, montažni premer: 200 mm, nosilnost: 340 kg, Micron VCE 750 - Despite its age, the machine is in excellently maintained condition and has only been used in single-shift operation. Manufacturer: Mikron Model: VCE 750 Ledpfop Sq Trsx Ah Dsah Year of manufacture: 1995 Control: Mikron CNC (Haas) Travel paths: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 positions Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Work table: 356 x 914 mm clamping area Max. table load: 340 kg Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Lajdpfx Aowxdyxoh Doh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Ljdpfx Ahewy I Tlo Doah Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 560 mm / 500 mm / 400 mm, spindle speed: 5,000 rpm, table size X/Y: 900 mm / 530 mm, feed rate: 8 m/min, rapid traverse: 10 m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3,950 mm / 2,650 mm / 2,150 mm, weight: approx. 3,000 kg, control: Heidenhain TNC 407/415, operating hours: 29,647 h. The central lubrication system is showing issues. Documentation available. On-site inspection is possible. Ljdpfjw H At Hsx Ah Dsah

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik 4. osi, vreteno 12.200 vrt/min HSK 63, miza 850x530 mm, hodi 600x450x450 mm, menjalec za 30 orodij, teža 6500 kg. Ledpfxjw Dc Irj Ah Djah

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Lodpfxot Hwxbe Ah Dsah Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 240 mm, dolžina podajanja os Z: 350 mm, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 40 m/min, hitrost podajanja os Z: 40 m/min, največja hitrost vretena: 30.000 obr/min, Mikron HSM 400U 5-osni CNC (grafitna frezalnica) Leto izdelave: 2002 Serijska številka: 107.87.00.024 Krmiljenje: Heidenhain iTNC530 Stožec vretena: HSK-E40 Hitrost vretena: 30.000 vrt/min Moč vretena: 13 kW (17 KM) Menjalec orodij: Avtomatski menjalec orodij s 36 postajami Pomiki: X-os: 400 mm Y-os: 240 mm Z-os: 350 mm A-os: ±110° C-os: 360° / 0,001° Sistem orodij: Osnovno ležišče za orodja System 3R (na nagibni mizi) 48-postajni orodni karusel System 3R Blum laserski sistem za merjenje orodij Hitri pomik: 40 m/min Ponovljivost: ±0,002 mm Maks. dimenzije obdelovanca: Ø230 mm × 350 mm višina Ledpfxjw H Izpe Ah Dsah Maks. nosilnost: 25 kg Konstrukcija: Okvir iz polimernega betona Sistem hlajenja: popolno tekočinsko hlajenje Dimenzije stroja (D׊×V): 3.840 × 2.540 × 2.640 mm Teža: 6.700 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Ljdpfx Ajwk Nm Ieh Deah Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. 10.000 min⁻¹

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 1,850 mm Y-axis travel: 1,400 mm Z-axis travel: 720/905 mm Control system: SIEMENS SL 840 D Spindle speeds: 15,000 rpm B-axis: -20 / +120° Tool holder: HSK-A63 Tool magazine with 45 positions Maximum tool length: 365 mm Tool diameter with adjacent positions occupied: 90 mm Tool diameter with free adjacent positions: 130 mm NC rotary table: 1,600 mm T-slots: 12 Lajdsvxwuwjpfx Ah Djh Slot width: 18H12 Slot spacing: 100 mm Table load capacity max.: 3,000 kg Table rotation speed max.: 30 rpm Total power requirement: 89 kW Machine weight approx.: 26 t Space requirement approx.: 7.00 x 6.20 x 4.15 m 5-axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, fire extinguishing system, 2x electronic handwheel, Steptec spindle, spindle oil cooler, ICS (internal coolant supply), high-pressure pump, Bürener coolant band filter system, chip conveyor. Machine can be inspected under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, spindle speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Ledpfx Ahsw Exr Ae Deah

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Ljdot I T N Eopfx Ah Deah Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Travel X/Y/Z 600/600/460 mm, 21 spindle speeds from 31.5 to 3150 rpm, motor 4.0 kW, spindle ISO 40, Heidenhain TNC 155 control, table size 900x550 mm, hydraulic tool clamping, rapid traverse, tilting rotary table with indexing, horizontal milling device, machine lamp, coolant system, splash guard, leveling feet, operating manual, excellent condition Laedpfxjpcf D Ie Ah Djh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Krmilna enota Znamka: HEIDENHAIN Model: TNC 410/426 Orodja Največja teža: 12 kg Ljdpswqh Tmofx Ah Djah Največji premer orodja: 200 mm Tip vpenjala orodij: SK 40 / DIN 69871 Dodatna oprema Raven zvočnega sevanja: Zvočna moč 75 dB (A) Vertikalni obdelovalni center MIKRON UM 600 s 3 osmi je bil izdelan leta 1997. Če iščete visokokakovostne rezkalne zmogljivosti, razmislite o stroju MIKRON UM 600, ki je na voljo pri nas. Za več informacij nas kontaktirajte. Uporabna področja Rezkanje

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Ljdpfx Ahstqqpls Djah Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Laodpfxolu N Hie Ah Dsh Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Ljdpfx Aew Emx Rjh Dsah

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Lajdpfjqagugsx Ah Djh

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Ljdpfx Ahetz Sqhs Djah Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Total power requirement 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system