Mep Cobra 352 nakup rabljenega (117)

Leto izdelave: 2001, Stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm Pjdped Aai Tsfx Aafjgu - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm - Multiple stroke - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Length: 1500 mm Psdpfx Aasfxu Tksfegu 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 – 1030 mm Required space: 1500 x 250 x 650/1030 mm

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. Podelf Tu Uepfx Aafogu > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Pgedpfx Aashpktyjfeu Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: skoraj kot novo (rabljeno), Overall length: 1500 mm Width: 500 mm Pgedpfx Ajfn Thhoafou Height adjustable with leveling feet: +/- 900 mm 6 rollers, diameter: 60 mm Roller width: 430 mm

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list Podpfx Aaoxab S Eefsgu * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Pgodpfsfg E Iajx Aafsu Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display Podpfx Aasxabwhjfogu * Easy and fast setting of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Pedpsfg E Ibjfx Aafsgu Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: rabljeno, Leto izdelave: 2004, Cutting diameter: 120 mm Saw blade diameter: 370 mm Vice width: 190 mm Cutting capacity at 90 degrees, flat: 180 x 95 mm Cutting capacity at 45 degrees, round: 110 mm Cutting capacity at 45 degrees, flat: 125 x 95 mm Cutting capacity at 60 degrees, round: 90.0 mm Cutting capacity at 60 degrees, flat: 90 x 95 mm Saw blade dimensions: 370 x 32 x 2.5 mm Cutting speed: 15 - 150 m/min Motor power: 3.0 kW Weight: 640 kg Dimensions (L x W x H): 900 x 1500 x 1910 mm Original price approx. €16,000 - Machine in checked/inspected condition - machine video available - ?v=gxj5GWtTcDE Equipment: - Semi-automatic vertical metal circular saw - Mitre adjustment: 60° left / 45° right Pgsdpfsxabrxjx Aafsu - Swiveling operator panel, front left - Saw head runs on linear double guideways - Pneumatic vice clamping - Stepless pneumatic saw blade feed - Infinitely variable saw blade speed adjustment - 2x spare saw blades - Machine base with coolant system - Operating manual

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice Pedpfx Aasfg Rldofsgu • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vice opening: 235 mm Cutting speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 3.18 kW Machine weight: approx. 1,175 kg Space requirement: approx. 1980 x 1105 mm * Automatic double-column bandsaw with a footprint of only 2.5 square meters * * Maximum performance in the smallest space * Pgodpfx Aaexabq Ujfju Equipment: - Powerful CNC automatic bandsaw in double-column design * for 0° cuts - Windows CE-based touch screen control * Swiveling control panel, 5.0 - 180° * Up to 100 cutting programs with different quantities and lengths * Minimizes programming time for recurring jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Driven linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable, allows cutting of all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed from 15 to 100 m/min - Robust cast iron (G25) structure to compensate for vibrations - Safety enclosure complying with the latest safety regulations . according to Machinery Directive EN 13898/2007

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Pgjdpfx Aaofg E H Rsfou Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Pedpfx Aexabpwoafogu Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: rabljeno, Leto izdelave: 1999, Premer žaginega lista 275 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Območje reza pri 90 stopinjah: ploščato 100 x 60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 80 x 50 mm Območje vpenjanja 110 mm Pedpfol R Nnnex Aafogu Število obratov 45 / 90 vrt/min Skupna potrebna moč 0,5 kW Teža stroja cca 0,07 t Potrebna prostora cca 900 x 700 x 1600 mm Ročna hladna krožna žaga z: - Strojno podnožje - Podporno letev 1500 mm

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Cutting range at 45° (round): 260 mm Cutting range at 45° (flat): 270 x 200 mm Cutting range at 60° (round): 180 mm Cutting range at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise jaw opening: 335 mm Blade speed: 15 – 100 m/min Automatic feed: 600 mm Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (LxWxH): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic bandsaw, including additional: * Semi-automatic * Semi-automatic-dynamic * Manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for saw operation functions * Ensures reliable operation, easy and intuitive to use * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarms and error messages - Mitre cuts in automatic cycle from 0° to 60° on the left - Semi-automatic, semi-automatic-dynamic, and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For performing cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High performance with low energy consumption - Material feed via stepper motor and ball screw spindle * Mounted on opposite ball bearings * Single stroke of 600 mm, repeatable for any length - Positioning of saw head and feeder movement via joystick - Automatic detection of cut start position - Manual blade tension control with display feedback * Via electronic converter Pgjdpfexabavex Aafsu - Automatic monitoring of cutting load * Through servo valve mounted directly on the cylinder - Coolant tray integrated in machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut Podpefg E H Uefx Aafsgu * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Psdpfx Aasxaa Tzofjgu Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Pgedpfxsfg E H Tj Aafeu Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: novo, Cutting diameter: 180 mm Cutting capacity at 90°: square 180 x 180 mm Cutting capacity at 90°: flat 200 x 150 mm Cutting capacity at 45°: round 115 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 125 x 110 mm Cutting capacity at 60°: flat 70 x 70 mm Cutting capacity at 60°: square 70 x 70 mm Cutting capacity at 60°: round 70 mm Blade speed range: 40 / 80 m/min Saw blade length: 2,130 x 20 x 0.9 mm Total power requirement: 0.75 kW Machine weight approx. 190 kg Equipment: - compact / robust manual band saw - with single-sided mitre device up to 60° to the left - hydraulic lowering of the saw bow * infinitely variable feed adjustment * automatic cut-off at end of cut - 2x saw blade speeds - saw blade guide with carbide plates - manual vice with quick-release - machine base - coolant system - manual saw blade tension (star grip at front) Pgodpfxsxaa Tns Aafou - 1x angle stop - 1x metal saw blade - operating manual

Stanje: rabljeno, Leto izdelave: 2004, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 115 mm Cutting capacity at 90 degrees, square: 95 mm Cutting capacity at 90 degrees, rectangular: 180 x 95 mm Working height: 940 mm Saw blade speeds: 15-30-45-90 rpm Total power requirement: 3.15 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.9 x 1.1 x 2.1 m Pgedpfev Rgxpsx Aafju Electropneumatic, linear-guided automatic saw - Infeed roller conveyor 1500 mm - Micro-spray device - Good condition

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: Pgedpsxaa S Rofx Aafeu - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Vice: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual operation, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At the start of the cycle: – Vice closes, motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position, then starting the cycle via hand button). Some features: - New centralised control panel on an articulated arm for easy operation from any working position. - Low-voltage operating panel: - Polyester membrane keypad with thermoformed, raised buttons and actuation control signal. - Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time used for completed cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position - IP55 manual 24 V cycle switch lever - Complete program for all special cutting cycles - Possibility to define other special cutting cycles for specific applications - New, latest-generation hydraulic control unit, highly efficient and energy-saving Psdpfjfg E H Ssx Aafjgu - Large work surface with turntable on roller bearings (265 mm), fitted with preloaded thrust bearing - Dual band speed (36/72 m/min.) with control panel - Prepared for installation of an electronic inverter for stepless band speed regulation from 20 to 90 m/min. - Adjustable saw head stroke controlled directly from the panel to adapt to the workpiece height - Clamping device can be shifted laterally left and right, featuring quick-action vice - Manual blade tension control, display on screen via electronic converter - Machine base with pull-out coolant tray - Electric coolant pump for saw blade cooling and lubrication - Prepared for installation of optional minimum-quantity lubrication system, in addition to the standard emulsion oil lubrication - Swarf removal brush - Machine suitable for pallet truck transport - Length stop for repetitive cuts - Material support arm with roller, to attach loading table - Bimetal saw blade for solid and profile material - Tools and user manual in the language of the operator

Leto izdelave: 1989, Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.6 kW Machine weight: approx. 0.41 t Pgsdpfsi Df D Aex Aafju Space requirement: approx. 0.8 x 1.0 x 1.85 m Semi-automatic cold circular saw

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter: 210 mm Cutting capacity at 90° (flat): 270 x 200 mm Cutting capacity at 90° (square): 200 mm Pjdewkvqtepfx Aafegu Cutting capacity at 45° (round): 180 mm Cutting capacity at 45° (flat): 180 x 190 mm Cutting capacity at 45° (square): 180 mm Vice width: 200 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2750 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.35 t Space requirement: approx. 0.95 x 1.7 x 1.9 m Bandsaw machine equipped with: - Cut-control system - Double mitre facility, 45° right and left - Mitre facility adjustable via turntable - Coolant system