Megafil 710 M nakup rabljenega (34.308)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.500 mm, skupna dolžina: 7.050 mm, skupna širina: 4.100 mm, volumenski pretok: 36.000 m³/h, temperatura: 80 °C, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), Oprema: kabina, osvetlitev, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Iiedpfxjxa H Ews Ah Ask (Alternatively, also available as a separate paint booth with a dedicated dryer). Here, we rely on full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating panels or wall extraction at a position of your choice. If you want to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converter, we are pleased to offer you a sectional control system. This allows you, during repair painting or partial loading of the booth (for example, if you only wish to paint add-on parts), to activate exclusively the section in which the components are located. This way, you can operate with a lower air volume without sacrificing quality, thus saving energy and ultimately real money. Please contact us—we will be happy to demonstrate these options to you. Do you have any questions or suggestions? We are gladly at your service.

Stanje: dober (rabljeno), Buderus 825 M-2500kW. Low-temperature heating boiler Iedpfeu I Ruasx Ah Asik

Stanje: novo, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [additional versions available] - Grid: 4,000 x 5,000 mm - Upper edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL as desired - Condition: new Scope of delivery: - Columns - Main and secondary beams - Cross braces - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,137.50 net, plus shipping and VAT. Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,979.30 net, plus shipping and VAT. Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,874.00 net, plus shipping and VAT. Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,655.36 net, plus shipping and VAT. Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €7,445.76 net, plus shipping and VAT. Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,986.24 net, plus shipping and VAT. Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €7,061.76 net, plus shipping and VAT. Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,930.06 net, plus shipping and VAT. Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €9,671.76 net, plus shipping and VAT. Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €13,063.67 net, plus shipping and VAT. Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,880.98 net, plus shipping and VAT. Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €18,258.52 net, plus shipping and VAT. Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,955.92 net, plus shipping and VAT. Optional accessories: - Railing - Flush wall connection - Stairs - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Iijdpfx Ajxmkwweh Aok ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly to your operational requirements – tailored to area, load capacity, installation height, and intended application area. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at extra cost. Additional costs depend on the place of delivery and the scope of shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a unit price/net price unless otherwise specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for trade, industry, and crafts. ✅ Four for success – The building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, ESC Screen Printing Machine Model 600 H/E, Semi-Automatic Iijdpfx Ahevvwbfo Ajk Maximum Print Format: 400 x 550 mm Precision screen printing machine with vertical frame lift designed for high-quality, register-accurate screen printing on films, scales, circuit boards, panels, glass, etc. Standard Equipment: - Vertical frame lift with printing in longitudinal direction from right to left - Pneumatic drive, infinitely variable - Hardened and ground guide shafts with ball bushings - Pneumatic maintenance unit - Pneumatic squeegee head with fine adjustment and automatic vertical lift for easy screen change and cleaning - Flood coater system - Single-function control for setup mode - Single-cycle operation via foot switch - Automatic cycle operation via timer - Modern, synchronized screen frame lift - Stepless print stroke adjustment via limit switches - Metal vacuum baseplate with micrometric fine adjustment in x-y axis - Central height adjustment of the print unit via trapezoidal threaded spindles - Stepless squeegee angle adjustment, scale readable - Quick-release squeegee clamps - Print and flood squeegee pressure individually adjustable via pressure regulators, indicated by manometers Technical Data Model 600 H/E: Vacuum plate: 500 x 700 mm Maximum print area: 400 x 550 mm Maximum substrate height: 8 mm Maximum frame size: 600 x 850 mm Micrometric fine adjustment: ±10 mm Air consumption: 11.3 L Electrical connection: 110V/5A 230V/3.5A Maximum cycle output: 1200 pcs/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packing dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg - Two squeegees – length per customer specification - Two flood coaters – length per customer specification Powder Machine 4050 The Powder Machine is specifically designed for the easy application of powder to DTF transfers. The infinitely adjustable film holders allow processing of films up to 40 x 50 cm. With a single movement, the thermoplastic powder is evenly distributed over the film. Excess powder is removed from the film by vibration, ensuring the thermoplastic powder adheres only to the printed areas. The Powder Machine guarantees an optimal powder application for your transfers every time. Technical Data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Timer setting: 0 - 3 seconds Noise level: less than 70 dB(A) Net weight: 27.5 kg Shipping weight: 44 kg M&R Economax II Compact Dryer

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 3.500 kg, Nastavljiva naprava za vilice Težišče: 500 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tip droga: Noben Iiedpfx Aow Sp Dhsh Aek Tehnično stanje: Novo Opis: Tovarniško nova nastavljiva naprava za vilice, gradbena širina 1.200 mm, odprtina center/center od 270 do 1.120 mm, konzole za standardne vilice, z ventilom za stranski pomik.

Stanje: novo, The Danish flower trolley, with identical dimensions to CC trolleys, is designed for the transportation and storage of seedlings and flowers. The Danish rack is equipped with shelves, each with a load capacity of 100 kg (with evenly distributed load). Shelf height can be adjusted every 5.5 cm, which makes it easy to customize for the size of the stored plants. The Dutch trolley is made of high-quality galvanized steel, while the shelves are constructed from waterproof plywood. This makes our flower trolleys durable and highly functional. The offer applies to a flower trolley base + 3 shelves: • Model: MPP000652 • Height: 190 cm • Width: 135 cm • Depth: 56.5 cm Net price: €80.00 per unit. Isdpem Ux S Eofx Ah Ajik The offer applies to a flower trolley base + 2 shelves: • Model: MPP000651 • Height: 190 cm • Width: 135 cm • Depth: 56.5 cm Net price: €70.00 per unit. The offer applies to an additional shelf for a flower trolley: • Model: MTP002923 • Height: 4 cm • Width: 130 cm • Depth: 55 cm Net price: €10.00 per unit. The offer applies to a flower trolley base + 3 tilt shelves: • Model: MPP000653 • Height: 172 cm • Width: 140 cm • Depth: 56 cm Net price: €145.00 per unit. The Danish trolley is equipped with 5-inch wheels made of robust and durable polypropylene. The garden flower trolley features 2 swivel castors and 2 fixed castors, ensuring easy maneuverability. The flower rack is made of galvanized stainless steel, providing corrosion resistance. This allows for the storage of seedlings and flowers both indoors and outdoors. An additional advantage is the waterproof plywood used for both the shelf and the base. * Delivery possible throughout Europe. * The above offer does not include delivery costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: novo, Powder Coating Systems For years, powder coating has been evolving continuously as an alternative to wet painting, and especially recently, it has gained significant importance due to its lower environmental impact, as it does not generate solvent or paint sludge emissions. In particular, the ability to recover unused powder enables especially high efficiency levels. For users, powder coating has the advantage of providing an extremely durable and corrosion-resistant finish that is considerably more impact-resistant than conventional paint. Additionally, reworking, such as grinding or drilling coated parts, poses no problem and will not cause the coating to flake off. Pony Luxury Coating powder coating systems therefore deliver tangible benefits: they are efficient, environmentally friendly, and—true to our tradition—exceptionally flexible. We achieve this through a range of different plant types. Manual Powder Coating Systems Manual powder coating installations are the ideal solution for complex and challenging workpieces. With skilled personnel, there is continuous adaptation to changing circumstances and product sizes. Flexibility is paramount, and these systems also offer a cost-effective entry into the world of powder coating. Iiedpexa Hzxofx Ah Ajk Large-Capacity Powder Spray Booths No matter how large or demanding your workpieces are—our systems are even larger! Due to the high loads involved in commercial and utility vehicle applications, powder coating has established itself as the ideal solution here. To accommodate ever-larger components, we offer large-capacity powder coating booths that, combined with manual application, place no limits on workpiece size and, when used in conjunction with conveyor systems, can handle any dimension. Automatic Powder Coating Systems If your operation requires high throughput and speed, an automated powder coating installation is your ideal solution. Coupled with conveyor systems, light curtains enable precise part detection and, therefore, exact dosing of powder for optimal efficiency. Of course, we also offer systems equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers The perfect finishing touch for any powder coating process: the curing oven. Our ovens, built to the highest insulation standard, extend our system-wide efficiency to this crucial stage. Detailed temperature control also allows use as a flash-off dryer to dry components after pretreatment. Temperatures of up to 250°C are possible, making these ovens suitable for use as tempering ovens—for example, with hot-dip galvanized parts. Of course, classic use as a powder curing oven is straightforward; optimal air distribution and a visualized control panel prevent overbaking and even enable simultaneous curing of different color shades. Questions or suggestions? We are always happy to help!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, SCHEER TW 4-2 Stringer Milling Machine + HM 18E Router All equipment is in excellent, like-new optical and technical condition. Everything functions flawlessly. The unit comes from a hobby woodworker, so it has seen very little use and is basically as good as new. Ready for immediate operation. All machines are from 1998. These are professional-grade machines for commercial use – no DIY store junk. Ijdpfx Asxbt Uboh Aeik SCHEER TW 4-2 Stringer Milling Machine - Enables precise milling of treads and risers on stair stringers - Hand crank allows for processing of curved butt joint surfaces - Hardened guide shafts with the router mounted on a cross-slide - Ball bearing guide bushes ensure smooth, accurate, and safe movement of the machine - Two quick-release clamps allow for secure mounting to the stringer - Cross-slide features two stops each for longitudinal and transverse directions - Includes two positioning angles - Includes operating manual - Milling travel: 750 mm (longitudinal), 75 mm (transverse) SCHEER HM 18E Router - Very good condition, hardly any signs of use - Extremely robust due to triple-supported milling spindle - Highly accurate concentric running and flawless milling results - Precision column guidance and torsion-resistant milling table - Constant speed even under heavy load - High-performance motor (minimal signs of fatigue even during extended use) - Long service life thanks to soft start (full-wave electronics) - Bearings are in perfect condition - Designed for heavy-duty continuous milling operations - Excellent visibility of the cutter shaft; chips are efficiently cleared away by a powerful blower - Numerous accessories available for grooving, rebating, doweling, dovetailing, etc. - 220V, 2000W - Variable speed control: 10,000–18,000 rpm - Fully operational - Spindle mount: M16 internal thread (adapters and other mounts available on request) - Includes 30 mm pilot ring and dust extraction hood

Stanje: novo, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particle board P6, raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crosses Iodpfx Aexmku Noh Aeik - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ TAILOR-MADE PLANNING & PRODUCTION This platform system is an example from our standard product range. Of course, we design and manufacture your storage mezzanine precisely to your operational requirements – tailored to surface area, load-bearing capacity, installation height, and intended application. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or dispatch is available at an additional charge. The extra costs depend on the delivery location and the scope of shipment and can be quoted upon request. PAYMENT TERMS Payment terms to be clarified upon placing the order. The price stated is per unit/net price as shown in the description (plus VAT). Of course, you will receive an invoice indicating VAT. ABOUT US The company DLK, based in Nordhorn, deals in new and used products in warehouse logistics, conveyor technology, storage platforms, textile storage, as well as machines for trade, industry, and crafts. ✅ Four to win – The four pillars of DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, Stružnica M. DE VALLIERE H140 Iiedpfoxbt Aljx Ah Aok

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 2.500 kg, Naprava za nastavljanje vilic Težišče tovora: 500 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Noben Iisdpfx Ahsw Sp Dbo Aek Tehnično stanje: Novo Opis: Povsem nova naprava za nastavljanje razmika vilic, gradbena širina 1.150 mm, odprtje sredina/sredina 250 do 1.050 mm, konzole za standardne vilice, z ventilom za bočni pomik.

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik Iisdei Apfzopfx Ah Ask 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: novo, Oprema: kabina, Stationary small parts spray booth Dixi █████ Coating small parts perfectly & evenly. The extraction system ensures perfect results in the smallest spaces. Optionally equipped with a turntable or wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side walls effectively limit overspray distribution, allowing work to be carried out in confined spaces without contaminating adjacent areas. Additionally, integrated lighting can be installed. Iodpexa Hx Refx Ah Asik Thanks to its low weight and minimal connection requirements, it can be relocated to a new site in a very short time, maintaining your operational flexibility at all times. The system is delivered fully pre-assembled and Your benefits Thanks to its compact design, flexible dimensions and adaptable accessories, a wide range of applications is possible without any issues. The sophisticated modular system requires little space, making it suitable for use in all types of rooms. The various filter media and filter stages ensure highly efficient operation and make filter changes a matter of just a few minutes. Application and safety Processing both water-based and solvent-based coatings is guaranteed thanks to the use of ATEX-approved explosion-proof motors. Optionally also suitable for glue spraying. The large filter surface ensures uniform extraction.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Potpuno automatska linearna PET mašina za duvanje Potpuni servo pogon 4 kalupa do 2000 ml Kapacitet duvanja: 4000 flaša na sat (novi uređaj) Niska potrošnja energije Ijdpfowrrcnox Ah Ajik

Stanje: novo, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other variants available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: chipboard 38 mm P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fixing materials PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,013.00 net, plus shipping and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,531.90 net, plus shipping and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,448.94 net, plus shipping and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,047.20 net, plus shipping and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,588.00 net, plus shipping and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,092.40 net, plus shipping and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,234.00 net, plus shipping and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €8,676.54 net, plus shipping and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,092.44 net, plus shipping and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €11,509.72 net, plus shipping and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €11,349.24 net, plus shipping and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €16,426.80 net, plus shipping and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €21,339.63 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush-mounted wall connection - Staircase - Transfer platform - Impact protection ⚙️ CUSTOM DESIGN & MANUFACTURING TO SIZE This mezzanine platform is an example from our standard range. Of course, we design and manufacture your storage platform exactly to your operational requirements – tailored to area, load capacity, assembly height and intended application. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for pickup. Delivery or shipping is available at additional cost. The extra charges depend on the place of delivery and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The stated price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. Iiedpfx Asxmkuioh Ask ✅ Four to win – The cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vhodna napetost: 400 V, Plinska peč za sušenje tekstila po sitotisku, M&R Sprint 2000. Peč je v zelo dobrem stanju. Dolžina traku: 7 m. Ne­prekinjena nastavitev temperature in hitrosti traku. Iiedoxfkyiopfx Ah Aok

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 2.500 kg, Naprava za nastavitev vilic Težišče tovora: 500 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Ni Iedpfx Ahow Sp A Re Asik Tehnično stanje: Novo Opis: Tovarniško nova naprava za nastavitev vilic, širina konstrukcije 1.050 mm, odprtina sredina/sredina 250 do 950 mm, konzole za standardne vilice, z ventilom za bočni pomik.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, obratovalne ure: 24 h, skupna masa: 1.200 kg, skupna širina: 1.000 mm, skupna višina: 2.500 mm, Lupilnik čebule M & P Iijdpfsurb R Ejx Ah Ajk

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.400 mm, skupna višina: 2.210 mm, skupna širina: 1.505 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, temperatura: 250 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), notranja dolžina: 2.500 mm, Oprema: nujno zaustavitev, ✈️ Additional shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate use! ✳️ Preserve your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ☘️ Environmentally friendly☘️⚡️Green Energy⚡️☘️ PEF-2.5 POWDER CURING OVEN ELECTRIC INTERNAL WIDTH: 1,505 mm HEIGHT: 1,800 mm (measured from air duct) INTERNAL LENGTH: 2,500 mm ➢ Dimensions of the thermoblock unit: 785x1800x2210 mm, heating power 30 kW/h, one recirculation fan: 1.5 kW/h, one exhaust fan: 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails for trolleys are manufactured as per the measurements stated on the base panels. ➢ Specially designed air duct for homogeneous air distribution inside the curing oven. ➢ Electrical control panel components from Siemens and Schneider. This curing oven does not come with a PLC system; PLC is available as an optional extra. ➢ Curing temperature, curing time, and heating unit functions are adjustable. At the end of the cycle, an audible and visual signal is emitted by the buzzer. ➢ Additionally, there is a product transport trolley with castor wheels inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200 mm (including fan) ➢ Teflon filters: 4 pcs. ➢ Filter extraction fans: 4 kW x 1 unit (6,000 m³/h – 200 mm SS) ➢ 36 W LED lighting x 1 unit ➢ Bottom drawer x 1 unit ➢ Control panel for regulation of air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty castors beneath the spray booth ➢ Additional filter at the fan outlet ♨️ Ramp-Heating Mode (optional) Precisely control temperature profile and dwell times, e.g.: • Reach target temperature within defined time • Maintain set temperature for desired time • Controlled cooling down to target temperature • Automatic notifications on process events _____ 🛡️ Safety First 🟢 Safety sensors for overheating prevention 🟢 Automatic shutdown in case of malfunction 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and smoke extraction via automatic ventilation Iedpfjwdtfujx Ah Asik _____ ⚡ Tailored Energy & Heating System 🔥 Also available with upgrade up to 400 °C for high-temperature processes (optional) _____ 🧠 No repeated settings needed! The oven saves your process parameters – batch by batch. Save time and avoid errors. _____ 📢 And best of all: If you have specific requirements – we also build bespoke special ovens according to your specifications! Contact our expert team for personal advice! _____ ☀️ 2 YEARS WARRANTY ☀️ Request more information now

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other configurations available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the stated grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus shipping and VAT Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus shipping and VAT Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus shipping and VAT Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus shipping and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus shipping and VAT Iedjxmkqdopfx Ah Ajik Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus shipping and VAT Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE This platform system represents an example from our standard range. Naturally, we develop and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, installation height, and intended application. Our planning department will prepare an individual, non-binding quote based on your specifications. Whether for new construction, expansion, or the modernization of existing systems – we support you with extensive expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional fee. Additional costs depend on the destination and scope of delivery and can be provided on request. TERMS OF PAYMENT Payment terms are to be agreed upon in case of order. The price stated is per unit/net price or as indicated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specialises in the trade of new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry and crafts. We constantly offer interesting used items from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. ✅ Four factors for success – the building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Prodajam karuselni sitotiskarski stroj za tisk na tekstil, M&R Sportsman EM 1210. Stroj je od novega v naši delavnici, malo uporabljen (470.000 tiskov). V drugih oglasih imamo veliko opreme za tisk na tkanine: plinska sušilna peč M&R Sprint M2000, vmesni sušilniki, 80 sitotiskarskih okvirjev Newman-roller, sistem za hitro poravnavo Trilock in še veliko več. Iijdpfoxfkm Njx Ah Aok

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other configurations available] - Grid: 5,000 x 6,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new Isdpfx Asxmklbsh Ajik The platforms are extendable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns/posts - Main and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT Further variants available Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Collision/impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we will design and manufacture your storage platform exactly according to your operational requirements – tailored to the area, load capacity, installation height, and intended application. Our design department will prepare a customised, non-binding offer based on your specifications. Whether new construction, extension, or modernisation of existing systems – we support you with in-depth expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of your goods. This item is available for collection. Delivery or shipping is possible for an extra charge. Additional costs depend on the destination and scope of delivery and can be enquired about individually. PAYMENT TERMS Payment conditions are to be agreed in the event of an order. The price is per unit/net price or as otherwise specified in the product description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage solutions, as well as machinery for trade, industry, and crafts. We constantly offer interesting used items from various brands/manufacturers at attractive terms. If you have any questions, please feel free to contact us. ✅ Four pillars of success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross braces - Floor covering - Fastening material PRICES: Option I: Base area: 30 m² | Size: 5,000 x 6,000 mm | €3,400.00 net, plus shipping costs and VAT Option II: Base area: 60 m² | Size: 5,000 x 12,000 mm | €6,008.00 net, plus shipping costs and VAT Option III: Base area: 60 m² | Size: 10,000 x 6,000 mm | €6,043.20 net, plus shipping costs and VAT Option IV: Base area: 90 m² | Size: 5,000 x 18,000 mm | €8,512.54 net, plus shipping costs and VAT Option V: Base area: 120 m² | Size: 5,000 x 24,000 mm | €11,154.85 net, plus shipping costs and VAT Option VI: Base area: 180 m² | Size: 10,000 x 18,000 mm | €15,343.02 net, plus shipping costs and VAT Option VII: Base area: 240 m² | Size: 10,000 x 24,000 mm | €20,081.60 net, plus shipping costs and VAT Further variants available Optional accessories: - Guard rail - Flush wall connection - Staircase - Goods transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & FABRICATION This platform system is an example from our standard range. Of course, we will develop and manufacture your storage platform precisely according to your operational requirements – tailored to your area, load capacity, installation height and the intended application. Based on your specifications, our planning department will prepare an individual, non-binding offer for you. Whether for new construction, expansion or modernization of existing systems – we support you with in-depth technical expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Additional costs depend on the place of delivery and the size of the shipment and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The price is stated as a unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US Based in Nordhorn, DLK trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for commerce, industry and trade. Iodpfx Aoxmkk Rjh Asik We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. ✅ Four to win – The building blocks of DLK's success – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: Chipboard 38 mm, P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other dimensions and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €3,031.80 net, plus transport costs and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €5,376.95 net, plus transport costs and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €7,509.23 net, plus transport costs and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €9,780.27 net, plus transport costs and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €9,485.32 net, plus transport costs and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €13,729.96 net, plus transport costs and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €17,669.70 net, plus transport costs and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €25,669.35 net, plus transport costs and VAT. Further variants available Iiedexmkkdepfx Ah Ajk Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMISED PLANNING & MANUFACTURING This mezzanine system is an example from our standard range. Naturally, we design and manufacture your warehouse platform exactly according to your operational requirements – tailored to the required area, load-bearing capacity, installation height, and intended application. Our planning department will provide you with an individual, non-binding offer based on your specifications. Whether a new build, extension, or modernisation of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of your purchase. This item is available for collection. Delivery or shipping is possible at extra cost. Additional costs depend on the place of delivery and the scope of shipment and are available on request. TERMS OF PAYMENT Payment terms are to be agreed upon when placing the order. Prices are given per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice including VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machinery for commerce, industry, and the trades. We continuously offer interesting second-hand deals from a range of manufacturers/brands on attractive terms. If you have any questions, please feel free to contact us. ✅ Four wins – The building blocks of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid dimension: 5,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor covering - Fastening material PRICES: Variant I: Base area: 25 m² | Size: 5,000 x 5,000 mm | €2,863.50 net, plus transport costs and VAT Variant II: Base area: 50 m² | Size: 5,000 x 10,000 mm | €5,040.00 net, plus transport costs and VAT Variant III: Base area: 75 m² | Size: 5,000 x 15,000 mm | €7,033.95 net, plus transport costs and VAT Variant IV: Base area: 100 m² | Size: 5,000 x 20,000 mm | €9,206.61 net, plus transport costs and VAT Variant V: Base area: 100 m² | Size: 10,000 x 20,000 mm | €8,916.48 net, plus transport costs and VAT Variant VI: Base area: 150 m² | Size: 5,000 x 5,000 mm | €13,075.20 net, plus transport costs and VAT Variant VII: Base area: 200 m² | Size: 10,000 x 20,000 mm | €16,519.56 net, plus transport costs and VAT Variant VIII: Base area: 300 m² | Size: 5,000 x 5,000 mm | €24,309.81 net, plus transport costs and VAT Further variants available Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipment is available at an extra charge. Additional costs depend on delivery location and shipment volume and can be quoted individually on request. PAYMENT TERMS Payment terms to be agreed upon in case of order. Prices indicated are unit/net prices as specified in the description (plus VAT). Of course, you will receive an invoice showing the VAT. ABOUT US DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, storage platforms, textile warehouses, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four advantages – The pillars of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions Iedpfxsxmkdks Ah Ajik