Madeži Vladar nakup rabljenega (8)

Leto izdelave: 1973, Stanje: dober (rabljeno), številka stroja/vozila: 699, Press force: 40 t Table size: 670 x 470 mm Ram surface: 670 x 470 mm Clearance between columns: 620/470 mm Gbsdpfx Ahjy Dpbs Dou Maximum installation height: 740 mm Pressing speed: 20 mm/s Rapid traverse: 50 mm Ejector force: 3 t Electrical connection: 380 V, 9.5 kW Space required: 2200 x 1875 x 3000 mm Weight: 2400 kg

Leto izdelave: 2019, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: DF0137,

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0309, Pressure: 200 t Table length: 2500 mm Table width: 2000 mm Max. stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Retracting force: 25 t Machine weight approx. (without operating materials): 50 t Column diameter: 210 mm Table swiveling speed: 25 mm/sec Table extension: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Approach speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of the press: 10,200 ? Surrounding maintenance balcony: 5,000 ? Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Table plate tiltable by 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in the ram center: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Functioning of the spotting press: Control operation modes: The control features "Manual" and "Semi-automatic" mode. In manual mode (joystick operation): - The table can be hydraulically extended and retracted at max. 30 mm/sec - The table can be hydraulically tilted up to the set angle at max. 25 mm/sec - The ram plate can be hydraulically lowered and folded by 90° and extended up to 180° - Pressureless movement is possible - Pressure can be set via the monitor - The speed can be adjusted between 1 and 10 mm/sec - An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled Gbodofxyi Dspfx Ah Dou In semi-automatic mode: - The ram can perform rapid traverse up to 10 mm/sec - A pre-programmed cycle (input via monitor) can be executed. Example: - 30 t pressure - Upper limit 300 mm - Lower max. limit 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm only 10 mm/sec - Dwell time at set pressure or BDC 1 second - Return to upper stop Joystick function: The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible. Monitor view: On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible. In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed. The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for: - Table extension/retraction (two-hand operation active) - Table tilt up/down (two-hand operation active) - Ram raise/lower (joystick active) - Ram plate lower/raise (two-hand operation active)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Machine weight approx.: 9 t Required space approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Stroke length: 1200 mm Installation height: Table/Ram at Top: 1200 mm Table height: 700 mm Table extendable: up to 1200 mm Table tiltable: up to 45 degrees Upper tool foldable: up to 170 degrees Gedpoffamqofx Ah Djbu Distance between columns: 1250 x 1000 mm Max. table load: 5 t Table travel speed: 25 mm/sec Approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously reports the ram position to the control system. The travel path, upper stop point, switching point (where the press changes from fast approach to working speed), and the target end position can be easily and quickly entered via the monitor control system. The working speed can be adjusted in increments of 1 mm/sec from 5 to 10 mm and in increments of 10 mm from 10 to 95 mm. The control system monitors the safety zones, the entire hydraulics, and the pump. The control cabinet is housed in a separate control enclosure.

Stanje: novo, številka stroja/vozila: DF0261 - Rev.00, Pressure: 63 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1050 mm Dimensions (L x W x H): approx. 3350 x 1800 x 4700 mm Return force: 6 t Approx. machine weight (without operating fluids): 10 t Column diameter: 120 mm Upper tool foldable: 180 degrees Swivel table: 75 degrees Gjdpefhcc Sefx Ah Debu Table swiveling speed: 25 mm/sec Tilting table: 75 degrees Table extendable: 1100 mm Max. table load: 5 t Motor power: 10 kW Oil tank: 200 l Oil cooling (electric): 1.5 kW (max) Monitor: (WEG) 12 inch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, številka stroja/vozila: 4293, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance from worktable to ram plate): 1200 mm Number of cylinders: 1 pc Stroke length: 1200 mm Table height above floor: 700 mm Table extendable: 1200 mm Table travel speed: 25 mm/sec Table tiltable: 45 degrees Max. table load: 5 t Gjdodxrqxopfx Ah Dobu Upper tool foldable: 170 degrees Clearance between columns: 1250 x 1000 mm Max. rapid approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating fluids): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45), surface induction-hardened and chrome-plated. Control system operation: The linear scale continuously reports the ram position to the control system. The travel path, upper stop position, and switching point—where the press changes from rapid traverse to working speed—as well as the target end position can be set quickly and easily using the monitor control panel. The working speed can be set from 0 to 10 mm/sec in 1 mm increments and from 10 to 155 mm/sec in 10 mm increments. The control system monitors the safety zones, the entire hydraulic system, and the pump, and is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm for reduced travel distances. Scope of delivery includes: Manuals and operating instructions for the motors, pumps, and the press itself CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC Hydraulic Presses

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 4273, Pressure: 110 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1150 mm Dimensions (L x W x H): 4200 x 2400 x 4800 mm Return force: 11 t Max. stroke: 1150 mm Weight: 16 t Table stroke: 1200 mm Swiveling table: 45 degrees Max. table load: 12 t Gsdpfx Ajd Ap Ugoh Djbu Movable table speed: 25 mm/sec Table swivel speed: 10 mm/sec Drive power: 23 kW Voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Return speed: 130 mm/sec Rapid traverse speed: 195 mm/sec Machine color: Grey 7035 RAL Movable part color: Orange 2009 RAL Other components color: Dark grey 7021 RAL Oil tank: 400 l Recommended oil: DIN HLP / ISO VG 46

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, delovna širina: 3.000 mm, najv. debelina jeklene pločevine: 6 mm, skupna širina: 3.000 mm, dolžina rezanja (maks.): 3.000 mm, dolžina mize: 3.000 mm, širina mize: 3.000 mm, Oprema: osvetlitev, varnostna svetlobna zapora, zaščita prstov, Uporabljena hidravlična škarja za pločevino Edwards Pearson 3 metre x 6,5 mm naprodaj Gsdpfsuykdxex Ah Djbu EDWARDS PEARSON model VR – 3000 mm x 6,5 mm škarja (letnik 2002) Model: VR6.5/3070 Hidravlična variabilna rezila (variable rake) Programabilni zadnji prislon Samodejna nastavitev razmika rezil Sprednji nosilci in vladarsko vodilo Priljubljen krmilnik CYBELEC DNC 60 Letnik: 2002 Dostava in montaža z usposabljanjem operaterja po dogovoru.